Reddit Reddit reviews 2016 Version NITECORE i4 Intellicharger Battery Charger

We found 111 Reddit comments about 2016 Version NITECORE i4 Intellicharger Battery Charger. Here are the top ones, ranked by their Reddit score.

Batteries, Chargers & Accessories
Accessories & Supplies
Electronics
Household Battery Chargers
2016 Version NITECORE i4 Intellicharger Battery Charger
Made of durable ABS fire retardant materialMetal sliders to reduce wear and tear when inserting batteriesCapable of charging 4 batteries simultaneously3 Color LED displays charging progress for each batteryAutomatically stops charging when completeCapable of charging 4 batteries simultaneouslyEach of the four battery slots monitors and charges independentlyAutomatically identifies Li-ion, Ni-MH and Ni-Cd rechargeable batteries3 Color LED displays charging progress for each batteryIncludes a wall power cord (USA). Batteries and DC adapter NOT included
Check price on Amazon

111 Reddit comments about 2016 Version NITECORE i4 Intellicharger Battery Charger:

u/theblakjak · 7 pointsr/electronic_cigarette

This massdrop isn't really a big savings. Especially adding the shipping cost. At least if you already have amazon prime. Total at mass would be $13 ish @ i2, and $18.49 @ i4, while amazon the i2 is higher priced, being the only deal by way of $2 at massdrop, and the i4 is cheaper by .05 on amazon.

(Amazon prime is a worthwhile awesome service and at such a low cost, i recommend it highly, plus there is a free trial to check it out in case you don't have it.)

u/dougstoner · 6 pointsr/electronic_cigarette

There are quite a few out there, but I have the Nitecore I4. (Can charge 4 batteries at a time)

http://www.amazon.com/Nitecore-IntelliCharger-i4-Charger-Generation/dp/B005UAI372

Works great for me, though I have read it does have a slow charge rate. I've never had any issues with mine, and never charges above 4.2 volts.

Here's the I2 (2 battery)

http://www.amazon.com/NiteCore-IntelliCharger-i2-Charger-charging/dp/B009JMDD9U/ref=sr_1_1?ie=UTF8&qid=1381866676&sr=8-1&keywords=nitecore+i2+charger

u/Tudius · 6 pointsr/electronic_cigarette

Looks good except for the charger. Trustfire chargers aren't known for there quality. I'd upgrade to something like Nitecore i4 or the Nitecore i2.

u/U_DONT_KNOW_MY_LIFE · 5 pointsr/electronic_cigarette

this is a charger recommended to my by another redditor when i was thinking about getting the vamo. It's on amazon.

u/Dayum_Son · 5 pointsr/electronic_cigarette

Mech - I have the magneto and it preforms like a champ. Absolutely no complaints. I'd look at a nemesis clone by hcigar as well.

http://www.vaperoyalty.com/hcigar-nemesis-mod/

http://www.myvaporstore.com/SMOKTech_Magneto_Stainless_VE_p/smok-ssve.htm


Atty - Igo W. It has amazing preformance, and for $20 or so you cant beat it. I'd also recomend this top cap. It will make it look flush on a magneto, nemesis or any 22mm mod. It fits right on top of the Igo W and gives you airflow control. Watch the video on their site.

http://www.v-apes.com/The-Vapes-Cap-for-the-IGO-W_p_515.html

http://www.myvaporstore.com/IGO_W_Rebuildable_Atomizer_p/yd-igow.htm


Batteries - Sony Vtc4. Best batteries. you can get two for under $25. Make sure you get at least 2.

http://www.myvaporstore.com/SONY_VTC4_18650_2000mAh_Battery_Flat_Top_30A_p/sny65020-f.htm


Charger - In my opinion the Nitecore i4 is the best charger. It gets the job done and is dirt cheap on Amazon and free two day shipping with prime.

http://www.amazon.com/Nitecore-IntelliCharger-i4-Battery-Charger/dp/B005UAI372/ref=sr_sp-atf_title_1_1?ie=UTF8&qid=1398042719&sr=8-1&keywords=nitecore+i4

u/machipu · 4 pointsr/electronic_cigarette

I wouldn't consider that a beginner device, you could consider getting the Katana kit from Vape Dojo, or an eGo kit from Discount Vapers or Steam Monkey while you're learning the ropes. I'll try to provide an explanation, regardless.

What you will need for your mod are batteries, a multimeter to check them, and a topper / clearomizer.

Batteries: MNKE, or Panasonic. You can get smaller/shorter ones as well, I just prefer the big ones so you can go longer without a recharge.

You don't want to store these at full charge for too long, probably not longer than a week at most, and you won't want to drain them. A drop of about 1 volt is probably the max. This may vary, some people drain them a lot lower but I believe it's safest not to do so.

Charger: Here is what I use. I hear Pila also makes good chargers, maybe shop around.

Clearomizer: Kanger Evod or Protank II are both good. The Protank II is glass and can be fully disassembled, the Evod is plastic and has just two or three pieces. You can pick up replacement heads at Discount Vapers or just about any e-cig vendor.

Let me know if you have any questions, there's a lot to take in.

u/meowmix4jo · 4 pointsr/ecigclassifieds

Just buy it new, that's what they cost.

http://www.amazon.com/Version-NITECORE-i4-Intellicharge-Charger/dp/B005UAI372

Most of the stuff on this post is same/more than new actually.

u/frogsandstuff · 4 pointsr/electronic_cigarette

Nitecore Intellicharger @ Amazon

It's possible that your charger isn't working properly, but it's also possible that it has been overcharging your batteries and has thus killed the battery life. Use your multimeter to be sure.

u/moostapha · 4 pointsr/electronic_cigarette

According to Amazon and Nitecore, yes. It will charge NiMH batteries.

But I haven't used it. I'm sure the manual is available somewhere from that second link.

u/Xanimal13 · 3 pointsr/electronic_cigarette

I ordered a NiteCore IntelliCharger tonight :) 20 bucks shipped!

u/evilkorn · 3 pointsr/electronic_cigarette

Here is a good charger

What batteries do you have now for your evic? If you want to use it in short mode check out AW or Efest 18350's.

u/santanzchild · 3 pointsr/electronic_cigarette

If its new get a refund these batteries arnt a joke one of them goes it can potentially mess you up or even burn your house down.

http://www.amazon.com/NiteCore-IntelliCharge-i4-2nd-generation/dp/B005UAI372/ref=sr_1_1?ie=UTF8&qid=1369430275&sr=8-1&keywords=i4+charger

something along these lines is what you want.

u/XtremeGnomeCakeover · 3 pointsr/electronic_cigarette
u/JackofTrades92 · 3 pointsr/electronic_cigarette

I haven't heard about that battery charger that comes with the kit, but a nitecore i4 is probably the most recommended charger on ECR right now.

If you want to get some cheap kanthal wire, you can get it off Ebay for cheap. I got like 100ft of kanthal for $8 off ebay.

There's my two cents.

u/nrhinkle · 3 pointsr/bikecommuting

There are many different replacement battery packs sold online, but I'm somewhat wary of any of them. Any which has 4 cells isn't going to be trustworthy unless it has a charging circuit built in to the battery pack, because you need to monitor the voltage of each battery cell individually and essentially charge each battery separately to be safe. Few if any budget battery packs will do that.

I would go the route of finding a decent case and then using your own 18650 batteries. That gives you control over what batteries you use, and lets you replace them on the go or over time as the eventually wear out.

For a case, something like the Fenix BA4C or this random case from Amazon should work. Then add 2x or 4x protected 18650 batteries.

For the batteries, I'd go with KeepPower 3400 mAh or the 2600 mAh ones if you don't need as much runtime. They use genuine Panasonic cells with a protection circuit, and are highly favored by /r/flashlight. Other trustworthy brands include Olight, Fenix, and Nitecore. Make sure you're buying from a legitimate distributor though; there are lots of fakes on eBay and Amazon.

A good charger would be the Nitecore i2 or i4.

u/d4rch0n · 3 pointsr/Vaping

Make sure you have a charger that stops charging when it's complete:

https://www.amazon.com/Version-NITECORE-i4-Intellicharge-Charger/dp/B005UAI372

Most people will probably tell you to just buy new batteries, but if it's just simple wrap damage:

https://www.imrbatteries.com/2-meters-pvc-shrink-tubing-for-18650-batteries-clear/

Pretty easy to rewrap them. Plus, you can print out your own custom designs

u/groverAlthouse · 3 pointsr/electronic_cigarette

IMO

Best

Bang for the buck

Worst - anything with "fire" in the name.

u/StonePotato · 3 pointsr/electronic_cigarette

Greetings all!

My main suggestion to anyone wanting to get into vaping it is to skip the ego-starter kits, MVP2 (cheapish Vv or Vw boxes), non-rebuildable tanks (Protanks, Nautilus) and just drive right into the mechanical mod / box mod world. I say this because the vaping experience is so much better with rebuildables. I went with the all of the above, and I personally wished that someone would’ve told me to just dive right in, because all that stuff is sitting around not being used. The people that I’ve talked to are typically hesitant to do so because of the coil building, but there are so many YouTube tutorials, suggestions and information on /r/RBA and /r/electronic_cigarette that it’s much easier than it seems. Anyway, if I were to start all over again, these are the things which I’d buy.

Must Haves
These are the things which I consider essential to starting off the on the right foot. I’ve purchased a lot of things, and these are the things which I suggest to my friends. Most of the links are from Amazon, because it’s what I’ve primarily used.

Battery - Sony VTC5
http://www.eciggity.com/2-pc-sony-18650vtc5-2600mah-30a-battery/

These are pretty much the standard when it comes to “safe” batteries. They’re affordable, good amp limit and have been recommended many times. If you purchase from the link above, they also give you a plastic carrying case!

Charger - Nitecore i2 or Nitecore i4
http://www.amazon.com/Nitecore-IntelliCharger-i4-Battery-Charger/dp/B005UAI372/ref=sr_1_1?ie=UTF8&qid=1404287334&sr=8-1&keywords=nitecore

Affordable, reliable and these won’t “overcharge” your batteries. The difference between the i2 and i4 is the amount of batteries they can charge at a single time. They also have a new fancier one out, called the Digicharger D2 and Digicharger D4. Those are nice because it has a LCD panel that displays a lot more information than the i2 and i4. I personally use an just an i2.

Mechanical Mod - Stingray
http://www.vaperoyalty.com/hcigar-stingray-mod-stainless-steel/

Now, 90% of what is suggested for an actual mechanical mod is going to be of personal taste. The Stingray is the “older brother” of the Nemesis. This is what I purchased when I first started out vaping. The unit is very easy to break apart, clean, has a locking ring, has a floating 510 connection and venting holes in case of a battery leak. Almost everyone I know has a Stingray.

Rebuildable Dripping Atomizer - Magma by Infinite
http://101vape.com/rebuildable-atomizers-tanks/309-magma-atomizer-clone-by-infinite.html

One of the best purchases I’ve made. The juice wells are very deep compared to everything else on the market (that doesn’t have a tank system). Threads are nice, easy to build on, post holes are large and the air-flow is easy to manipulate. You can run this on a single coil or a dual coil. Blows almost all the other RDAs I have out of the water. This is my main RDA.

Organic Cotton - Maxim Hygiene Products Organic Cotton Balls
http://www.amazon.com/Organic-Cotton-Balls-Triple-count/dp/B00E8T2X36/ref=sr_1_3?ie=UTF8&qid=1404288337&sr=8-3&keywords=organic+cotton

I suggest using un-bleached, organic cotton. Some people take it one step further by washing them, I think thats taking it a bit far and I don’t do it. You can pick them up from any convenience store or supermarket (CVS, Walgreens, Target, Whole Foods), a 100 count will last you AGES.

Kanthal - AWG A1 26 Gauge
http://www.amazon.com/Kanthal-Gauge-100ft-0-40386-Resistance/dp/B00HALND7Y/ref=sr_1_1?ie=UTF8&qid=1404288659&sr=8-1&keywords=kanthal+26

I like to use 26g kanthal wire for my dual coil builds. 26g is a bit thicker than what a lot of people suggest (28g), but for me, because it’s thicker, it’s easier to work with.

Screwdrivers - Stanley 6 Piece Screwdriver set
http://www.amazon.com/gp/product/B00009OYGV/ref=oh_details_o05_s01_i02?ie=UTF8&psc=1
The screwdrivers which come with your RDAs are short, small and crappy. I like these screw drivers because they come in a variety of sizes and you do not need to mess with a drill-bit. What I really like about these, is at the end of the drill bit is a small little ledge (can’t think of a better word), where you can push your coil and scrunch it up a bit.

Ohm meter / Multimeter - Any generic ohm reader or Innova 3300
http://101vape.com/meters/170-ohms-meter.html

http://www.amazon.com/gp/product/B001O1X65A/ref=oh_details_o02_s01_i01?ie=UTF8&psc=1

You can use a multimeter to do basically the same thing as an ohm reader. The multimeter has an added benefit of being able to read the volts are your battery as well. I have both, but I prefer to use a “regular” ohm reader. This video below can teach you how to use a multimeter for that purpose.

https://www.youtube.com/watch?v=wgXAmPBAO5g&index=2&list=LLU7AM2JUxXCrj4TSCDQDffw

Optional items
Things that I’ve purchased that you can probably substitute with something in your house. They’re nice to have, most people have these, but I decided to link these anyway, because I didn’t have some stuff (my scissors were too large).

Scissors - Generic surgical scissors
http://www.amazon.com/Amercian-Diagnostic-Corporation-3425-Stainless/dp/B000GHIUR2/ref=sr_1_5?ie=UTF8&qid=1404289491&sr=8-5&keywords=surgical+scissors

To cut your cotton. Small, sharp and gets the job done.

Tweezers - Ceramic tweezers
http://www.fasttech.com/products/0/10007588/1655800-heat-resistant-stainless-steel-tweezers-for-e

Allows you to hold your coil together and torch them without heating up the tweezers.

Wire cutters - Hakko CHP-170
http://www.amazon.com/gp/product/B00FZPDG1K/ref=oh_details_o03_s00_i02?ie=UTF8&psc=1

For cutting your kanthal off that spool!

Atomizer holder - Plano 23630-01
http://www.amazon.com/Plano-23630-01-Stowaway-Adjustable-Dividers/dp/B000E3FKVC/ref=sr_1_4?ie=UTF8&qid=1404289861&sr=8-4&keywords=plano

You’re gonna buy a bunch of atomizers. Everyone buys a bunch. You’re not going to be able to help yourself. I use this plastic case to keep everything neat and separated.

Building deck - Tenderfoot Stands
https://www.facebook.com/tenderfoot.stands?fref=ts

You don’t need this. But it makes building RDAs easier. You can also place your juice filled RDAs on here.

Torch - Mini Jet Flame 503
http://www.amazon.com/gp/product/B007A9YSPW/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

This will help you get those coils nice and tight, without having to fire off your mechanical mod.

Battery Case - Bluecell
http://www.amazon.com/gp/product/B007Q6PJO8/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1

If you don’t buy the batteries from the link above, you’re gonna want a battery case. Do not keep your batteries loose in your pocket or floating around your bag. They can come in contact with something metal and potentially damage the battery.

u/NorseSock · 3 pointsr/electronic_cigarette

I'm going to give you a list with some upgraded options.

|Item|Base|Upgrade|
|-----|------|---------|
|Mod|Sentinel M16 Clone ($24.99)|Nemesis Clone($31.99)|
|RDA|IGO-W ($12.99)|
|Battery|Sony VTC5 ($10.99)|Buy more.|
|Charger|Nitecore i2 ($11.55)|Nitecore i4 ($16.25)|
|Wire|28 gauge Kanthal ($7.30)|
|Cotton|Your local drugstore, like $4)||
|Total|$71.82 + tax/shipping|All upgrades: $94.51|

You could save a couple bucks by ordering from China, but you'll be waiting quite a while for your stuff. I'm not a huge fan of the Sentinel clone, but it's really inexpensive. If you're cool waiting like a month, then I'd get the Nemesis Clone from FastTech.

u/PlasmaTune · 2 pointsr/electronic_cigarette

Most likely the charger, the NiteCore i4 is pretty cheap and will do well. If the Samsungs are bad return them, if you can't then LightningVapes.com has Sony VTC4s, 2 for $20.

http://www.amazon.com/gp/aw/d/B005UAI372/ref=mp_s_a_1_1?qid=1425866222&sr=8-1&keywords=nitecore+i4&dpPl=1&dpID=41n40tgSmhL&ref=plSrch&pi=AC_SY200_QL40

And yes I'm the one who answered about your Dovpo also :)

u/cheech_sp · 2 pointsr/flashlight

I think $90 would be better spent on a quality battery charger and some Eneloop AA's. Then you'd be set on charging batteries for a future EDC flashlight and headlamp.

u/elektr0soul · 2 pointsr/electronic_cigarette

Trust fire charger blows up: http://ukvapers.org/Thread-Efest-battery-Trustfire-charger-just-exploded

Ultra fire charger explosion: http://www.candlepowerforums.com/vb/showthread.php?280909-Ultrafire-18650-3000mA-exploded

Amazon reviewer explains nitecore charger explosion: http://www.amazon.ca/gp/aw/review/B005UAI372/R72LNM7UFJ68X/ref=cm_cr_dp_aw_rvw_3?ie=UTF8&cursor=3

To each his own,our hobby comes with inherent yet minor risks, no matter how we charge our cells. They are an imperfect power source.

u/muchswag · 2 pointsr/flashlight

Really appreciate all the help, but I have to admit, I lack a basic knowledge of electronics and worry I would have a hard time figuring out the second charger mentioned.
Is this the nitecore charger you were referring to?
http://www.amazon.com/gp/aw/d/B005UAI372?cache=c78bea20b38763aa4f730123cdc48067&pi=SY200_QL40&qid=1411950790&sr=8-1#ref=mp_s_a_1_1/184-8652054-1193149

u/stinkfoot70- · 2 pointsr/GrassHopperVape
u/Entstronaut · 2 pointsr/mflb

UK Amazon (op) or US Amazon?

Sorry for the slow reply >.<

u/pn23 · 2 pointsr/photography

Ouch, that totally blows. Yeah, like the others have suggested, the Sanyo Eneloops seem to be the best for flashes. The recycle time is extremely fast (from what I've noticed even when it's been popped a few hundred times). I've had my set of 4 for a few years now... didn't use it as much so I assumed it still held it's charge and still actually does!

Pick some up and grab a Nitecore Intellicharger battery charger for your rechargeable batteries.

u/ExPwN · 2 pointsr/mflb

> http://www.amazon.com/Nitecore-IntelliCharger-i4-Battery-Charger/dp/B005UAI372

That's an 18650 battery charger, how does it not overcharge AA batteries?

u/am-i-ginger · 2 pointsr/electronic_cigarette

My 350s charge in an hour, sometimes less. I have this charger

It automatically stops charging when they're full, so I don't have to worry about exploding batteries =)

u/iskin · 2 pointsr/electronic_cigarette

Overcharging is what is most likely to cause a battery to fail.

The ego style batteries are going to mostly be safe as long as you use a proper charger. Don't let it charge over night or on a highly flammable surface. Don't push the button while it's charging.

The most worrying batteries are going to be the ones you can swap in and out of a mod like the Vamo, Kamry K100, etc. They are batteries like the 18650 or 18350 and use a good charger like the Nitecore IntelliCharger i4. You'll want to use a volt meter to check them when you take them from your charger to make sure they aren't charged over 4.2v.

Use a LipoSack while charging batteries for extra safety. You could also build a charging box. Don't pour water on your battery if it catches fire.

If you're still worried. Failure will most likely happen right off the charger (well, on the charger because that is when a fire is most likely), after it has been dropped, or if it has been in an area that is too hot or too cold. Don't use you're battery if you notice any dents or bulges. Hold it away from your face and give it a 3 count test fire away from your face while your device is fully put together after you take it off the charger or if you did something that worried you.

u/djrbx · 2 pointsr/electronic_cigarette

Fasttech is somewhat a reputable seller. They do sometimes have stock issues with their products but you'll still receive the item after a long wait. Keep in mind they are based in Hong Kong so expect the item to arrive in or around 1-2 weeks.

Also, I still recommend getting a better charger. To my knowledge, the charger that comes with the kit is just a basic charger with no safety cutoff/overcharge protection which can damage your batteries overtime. Here's a cheaper charger on Amazon instead of the Pila charger I posted earlier.

u/ender4171 · 2 pointsr/electronic_cigarette

I'd get a charger first. I had a couple of trustfires when I first got into vaping and they are very poor quality (and borderline dangerous like /u/Jack_Shid pointed out). One of mine started buzzing and eventually shocked me. Grab a Nitcore I4. They are only $22 on Amazon, and qualify for Prime if you have it.

u/TheHotCoco · 2 pointsr/trees

Would you be interested in a portable vape that you could swap batteries on? Then you could charge 4 batteries and swap them out on a trip.

I'm kind of interested in designing my own vape.

u/tubeguy · 2 pointsr/electronic_cigarette

Lots of choices on each but you can't go wrong with this setup. I placed a fasttech order Saturday and just got the shipping notice.

http://www.fasttech.com/products/1411/10004602/1391901 (pick a color)

http://www.rtdvapor.com/online-store/batteries (the above uses unprotected 18650, 18500, 18490, 18350)

http://www.amazon.com/Nitecore-IntelliCharger-i4-Charger-Generation/dp/B005UAI372

u/pandapanda730 · 2 pointsr/electronic_cigarette

So, people are always talking about finding something to quit smoking, but you are on 0 nic now, and you still want to vape for fun. What do you want then?

The mod: Smoktech Magneto. This is a solid mod with a good price tag. this will net you the opportunity to try out some "sub-ohm rebuildables" and high wattage vaping.

Batteries: Samsung INR18650's. Some good batteries here, not the highest of the high end as far as batteries go, but extremely powerful, decent capacity, and for the newbie, great safety.

To charge your batteries: Nitecore i4. Super safe, solid charger. not much to say here.

For the clouds: Smoktech RSST. A lot of people really don't like dealing with stainless steel mesh, but inside of this tank, I get some of the best flavor I've ever had, better than the glorious cotton microcoils.

As far as juice goes, just buy what you already like in max VG to start. It's really the best vape experience out there. There's no loss in flavor at all, and with rebuildables, it's a match made in heaven.

u/Kruithof · 2 pointsr/flashlight

A legitimate 3500+mAh battery will probably not be worth the extra price unless you absolutely need longer runtimes on a single cell. In most cases, the listed capacity is a total fabrication, luckily some nice folks do various tests to see the actual capacities of various cells. Here is one from 2012 and one done in 2011 is here.

I'm not familiar with the prices of all of those cells, there are a lot to choose from but I do know that the tenergy cells have decent capacity and are a pretty good value, here on amazon.

A charger that is a great value is the Nitecore i4, found for a very good price on amazon. It can only charge with a maximum of 750mA charge current which is a little lower than what is best, but it will do just fine. For maximum speed charging of 2 cells be sure to use different channels, #1 and #3 are paired as well as #2 and #4. So use combinations like #1 and #4, #1 and #2, #2 and #4, etc.

u/rejctchoir · 2 pointsr/flashlight

Just a word of caution- I bought a keepower 14500 and got it stuck in my SC52W. There is a ton of variance when it comes to 14500 dimensions (even within brand/model). I had read reports of people using the keepower 14500, so I didn't give it a second thought. I pushed it in (like a dummy) and it pretty much jammed/vacuum locked in. I had to epoxy a nail to the end of the battery and pull it out like that. The amount of force tore the protection circuit from the end of the battery. Woof.

Anyway, Zebralight makes a 14500 with 840mah. That's the top capacity for a 14500 (a Sanyo cell). I would just get that! If you want to go cheaper, I know the trustfire 14500 cells fit.

And for a charger- do you have any other LiOn cells or lights that will take them? This charger is a good one and will charge pretty much every battery you have.

u/anonym0ose · 2 pointsr/electronic_cigarette

Just make sure you get a good set of batteries for it, maybe 2 aw imr 18350s and 2 aw imr 18650s then get a good charger for them,I recommend the nightcore intelicharger to get all 4 charged at once and safely

u/descendus · 2 pointsr/Vaping

battery wise you'll hear a lot of different opinions from different people I have been using the same ones for a long time samsung 25 R. http://www.selectvape.com/samsung-25r-18650-batteries-2-pack-p/sam18650.htm They come in blue and green. The type of battery they are is called an 18650 rechargeable vape battery. You will need a battery charger that works with the 18650's , I use a nitecore intellicharger , it charges all different sizes. https://www.amazon.com/Version-NITECORE-i4-Intellicharge-Charger/dp/B005UAI372

Now you will want at least 2 sets = 4 batteries , the mod uses 2 at a time. You can use one set while you charge the other set. If you have questions about anything else just let me know. Some other people might know where to get those items cheaper also , So , Keep your eye out.

u/finalsleep3 · 2 pointsr/mflb

No, I'm pretty sure that is for a different battery chemistry. Check this out, this charger is the best I've used so far and I use it for e-cigs, the mflb, etc. It handles everything
Edit: I am a dumbass, yeah that would totally work, but I still strongly recommend that Nitecore. Don't fuck around with battery safety :)

u/CaCHooKaMan · 2 pointsr/xboxone

I use the same charger that I use to charge my vape batteries

http://www.amazon.com/Nitecore-IntelliCharger-i4-Battery-Charger/dp/B005UAI372

u/ac1dicburn · 2 pointsr/flashlight

Do you have any recommendations on which 18650's and chargers to use? From searching around here I am looking at orbtronic 3500mAh 18650s and a NITECORE i4 charger.
https://www.amazon.com/dp/B0193UPEWG/_encoding=UTF8?coliid=I2LHZVTBJOZKV5&colid=VX01G57PA1QU
https://www.amazon.com/dp/B005UAI372/_encoding=UTF8?coliid=I141IWEEHDFVD1&colid=VX01G57PA1QU
Is there any reason these are a bad choice?

u/jules_am · 2 pointsr/electronic_cigarette

I just looked this up on Amazon. It says it can do 18650, among other battery types, will 18350 work fine on it?

edit: nvm, looked at the faq and it answered my question :) thank you very much!!

u/Cloud_ChaZer · 2 pointsr/electronic_cigarette

Upon research within this sub you will find that charging with the onboard charger is highly unrecommended. Get a 3+ baay external charger. I have this one and love it. I dont have to get my lazy ass up to check my batteries, i can check them via Bluetooth on my Ipad. http://www.amazon.com/Efest-LUC-Blu6-BlueTooth-Intelligent/dp/B010W7K0MS/ref=sr_1_8?ie=UTF8&qid=1457635940&sr=8-8&keywords=18650+4+bay+charger

However if your looking for a cheaper option try this, http://www.amazon.com/Version-NITECORE-i4-Intellicharge-Charger/dp/B005UAI372/ref=sr_1_2?ie=UTF8&qid=1457636098&sr=8-2&keywords=18650+4+bay+charger

u/Brown_eyed_pea · 2 pointsr/Canadian_ecigarette
u/phaed · 2 pointsr/electronic_cigarette

If you like the Ego-Twist, then you're in for a treat. An Ego-Twist is pretty much near the bottom of the barrel when it comes to a satisfying experience.

Here I'm going to save you some time. This is what I would recommend as an upgrade. If you have money to spend, go straight for the Provari. It will soon become the go-to tool in your arsenal. Otherwise get yourself a good DNA-30 based box mod like a Hana Modz Clone or a Cloupor. Then get yourself a good rebuildable atomizer like the Kayfun or Taifun. The flavor and vapor production their style of atomizer produces is highly satisfying. They work via negative pressure so once you fill it you can pretty much forget it in your pocket and rest assured that its wont leak on you. Also I would recommend you get yourself a Genesis style Atomizer like the Kraken for while you're in the house, has a tank you can fill plus it has an exposed side on top where you can drip flavors on in case you want a taste of something new without cleaning out the tank. The pull on those is very loose and airy, so you can fill your lungs in as fast as you want, the faster the pull the colder the air. Different than the Kayfuns/Taifuns of the world which have a limit to how fast you can pull. Genesis style atomizers tend to be leaky so I wouldn't recommend it as "take to work" type atomizer.

You will also need some batteries, get yourself a pair of Sony VTC5 or Samsung 25R and a good charger. These allow for high discharge rates. Here is some info on that.

You will also need some Kanthal wire, 26 guage is good. And some cotton as you will need this to build the coils on the rebuildable atomizer. Youtube is your friend when it comes to how to build the coils.

u/LittleBobby_Tables · 2 pointsr/electronic_cigarette

No. Avoid them and most likely the charger your buddy has as well.

Some things just aren't worth skimping on. Get yourself an intellicharger i4 and a few IMR chemistry batteries by AW, Sony or Panasonic. That way if you ever move to mech mods, everything will work together safely.

u/MIDItheKID · 2 pointsr/electronic_cigarette

The "My First RDA" Mechanical Mod Kit

Nemesis Clone Mechanical Mod - Great price, great features, an awesome place to start without breaking the bank.

Green Sony VTC4's - I would suggest at least 2, I prefer 4.


Nitecore Intellicharger i4 (Or the i2 if you only have 2 batteries) - Great premium safe charger. What's worth more? The few bucks you save on a cheapo charger, or your house which you burned down by overcharging your batteries on a cheapo charger.

IGO-W2 or IGO-W - The IGO-W is a go-to for many, however it will likely require drilling the air holes out. The W2 costs a few more bucks, and has a different pin configuration internally, but has adjustable airflow. If you go with the IGO-W, you will also need some kind of mini screwdriver. Here's a super cheap kit

A Drip Tip - You'll need one to go with your IGO, style is up to you. You can get them pretty much anywhere, I just linked to this store because if you are putting in an order there anyway, you may as well save on shipping.

That will get you setup with your mod/RDA. Now you are going to need your building materials. Here's what I suggest.

Rebuilding Materials

An Ohm Reader - Do not skip out on this. Knowing the resistance of your coils keeps you out of harms way.

28ga Kanthal - This seems to be the preferred gauge for RDA's.

Chefs torch - This isn't necessary, but is hugely helpful for making microcoils

This cheap grooming kit - What you need from this are the nail clippers, tweezers, and scissors (also the pouch it comes with is handy for keeping your rebuilding tools in)

Cotton Balls - You can get sterilized cotton from most pharmacies. I use plain old 100% cotton balls. Just make sure to read the package and check of additives. You don't want any makeup-remover or anything like that. Just pure cotton.

Drill Bit Kit - For wrapping your coils. 1/16th seems to be everybody's favorite standard, so if you're prone to losing small things this might be a better kit for you.

u/bazooked · 2 pointsr/Vaping

I think that review is mistaken. I just double checked with mine, and if you YouTube 'Mikevapes IPV5' he will confirm not USB chargeable. As far as charger I love my Nitecore I4, but there are a couple of great ones out there. Im just having a straight up brain fart on them (on little sleep this week).

http://www.amazon.com/Version-NITECORE-i4-Intellicharge-Charger/dp/B005UAI372

u/TechRice · 2 pointsr/Vaping101

For a coil kit that comes with a decent ohm meter. http://www.amazon.com/Walant-Coil-Complete-Vape-Tool/dp/B011DT48UO

And for a battery charger I use this: http://www.amazon.com/Version-NITECORE-i4-Intellicharge-Charger/dp/B005UAI372

Some people prefer the D4 over the I4; but I use the rx200 with vct4's and have no issue with the I4.

With that kit, you can also order some kanthal and start doing basic builds. Spend a little time on YouTube learning to build on your Atty and you'll get the hang of it in no time.

u/zifu · 2 pointsr/electronic_cigarette

This charger is known to overcharge batteries (source: I used to use one). Get a Nitecore i4 or similar.

u/pussifer · 2 pointsr/electronic_cigarette

I've owned a Vamo for almost the entire time I've been vaping, and I love it. Simple to use, gets what I want outta my juices, lotsa options, well-built, and cheap (you can get the SS V2 here for $33.14 (+ tax) shipped, but it does take about a week and a half to get to your door).

I love my efests, AWs, and Sanyos, and charge them all with a Nitecore i4 2nd gen. This setup has done me right for a long while now.

u/GobbleThisObelisk · 2 pointsr/electronic_cigarette

$17.50 from amazon. Prime eligible.

u/HamGynecologist · 2 pointsr/electronic_cigarette

Get the mech you like the look of. You'll hear things like this one is better than that one because it has better plated contacts but unless you have a bunch of different mechs to compare it to than it really isn't going to make that much of a difference.

illuminationsupply has good batteries. I would recommend the sonys vtc5s

fasttech has very inexpensive mech clones

amazon has the best most inexpensive charger for only 15 dollars and free shipping with prime.

lightiningvape has some of the best prices on rebuildable supplies.

And that's pretty much all you need.

u/Sephorria · 2 pointsr/electronic_cigarette

Nitecore I4 is on sale on amazon for you prime owners, only $17.79.

u/HawalisGal · 2 pointsr/ecigclassifieds

They have the 4 bay on amazon for 16 dollars.
http://www.amazon.com/Version-NITECORE-i4-Intellicharge-Charger/dp/B005UAI372/ref=sr_1_1?ie=UTF8&qid=1465252676&sr=8-1&keywords=4+bay+charger+18650

You can sign up for prime for 30 days free. Just remember to cancel it if you decide you don't want to keep it.

u/badst33l · 1 pointr/electronic_cigarette

you can get the i2 and i4 on Amazon if you have a prime subscription. Price is pretty comparable.

u/thebuffather · 1 pointr/electronic_cigarette

Okay, thank you. Going to pick up a Nitecore IntelliCharger i4 then. Thank you!

u/flatulentdisaster · 1 pointr/electronic_cigarette

Have you tried looking at the nitecore intellicharger? They're not terrible money on amazon. I've had great luck with my i2, although I've had it since end of June but they're supposed to he great.
http://www.amazon.com/gp/aw/d/B005UAI372/ref=mp_s_a_1_1?qid=1381077327&sr=8-1&pi=AC_SX110_SY165
I don't know where you're located but that's a link for US. Happy Vaping!

u/ajv11223 · 1 pointr/electronic_cigarette

So pretty much what you're going to have to keep spending money on is the coils, and juices. Like /u/sfw123 said, you can do some maintenance and get some more longevity on them but depending on your juices they can wear out faster. But as you can see they're not all that expensive. Buying a set of those over weeks is still cheaper than a pack of cigarettes every few days.

On top of that , get some good batteries and a charger such as this:

http://www.amazon.com/gp/product/B005UAI372/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1 .

You are spending a lot of money at once, but depending on how deep you get into vaping...you may end up saving money. But the most important thing here is that you're improving your lifestyle. It's money going towards a healthier life

u/TDurdz · 1 pointr/ecigclassifieds

It's unlikely to find one used on here... if you're not in a rush:

https://www.ebay.com/itm/251879102706

And if you are in a rush this ships via Amazon prime

https://www.amazon.com/gp/aw/d/B005UAI372?ref=olp_product_details

u/a_horse_with_no_tail · 1 pointr/electronic_cigarette

OK, I don't see where that link says it's a V2.

You can check here:
http://lygte-info.dk/review/Difference%20between%20Sysmax%20charger%20V1%20and%20V2%20UK.html

I asked because I got my vamo kit with the Nitecore charger a few weeks ago, and had the same issue. I did some searching around online and read that FastTech ships the vamo kits with the V1 chargers, which have the problem with getting too hot. I really don't know how true any of that is, but I returned my charger and bought a V2 from Amazon. But yeah, I had the extreme heat while charging and also the burning plastic smell. So, return it, it's not normal.

editing to add, I got my 14 v2 from amazon for just a dollar more.

u/Savens · 1 pointr/Vaping

Thanks for replying. Looking at this for an external charger since people are saying the RX200 USB charging isn't safe/great:
http://www.amazon.com/gp/product/B005UAI372/ref=s9_hps_bw_g200_i4

Also, since I'm going to be using the RX200 with Herakles Plus and LG HG2, effectively what settings would I have to change on the device?

  • Amps, Temperature Control, Watts? Anything else? & to what?
u/dbasket · 1 pointr/Vaping101

Im looking at the I4 and some LG batteries

I'll eventually get into rebuilding, but for now I want a system with pre-built coils that are trustworthy and affordable; so Im looking at the TVF4 mostly. The Quad Coil seems to have the best performance but it doesn't list what metals the coils are made of. Because of that I may just get the stainless steal low ohms coils. I'm emailing Smok to get more info now

u/Daniel7355608 · 1 pointr/Waxpen

https://www.amazon.com/gp/product/B005UAI372/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A38GBW24HDG5AI this is a charger made to charge that type of battery. It's really high rated and sold directly from amazon so thats basically a waranty

u/jlaw30 · 1 pointr/ecigclassifieds

Have a Vamo V5 with 4 efest batteries for sale here

Also, a Nitecore i4 charger for $17 on Amazon. I use it and it works wonderfully.

u/theturtlegame · 1 pointr/electronic_cigarette

Another rec for i4. Can be had for <$16 - amazing utility for the price

u/rumcore · 1 pointr/electronic_cigarette

I wouldn't pay much more than 30 bucks for a Nemesis clone. Plenty of places online to get one for that. I got an HCigar from thriftyecig.com. Shipping was fast and added one dollar to the price.

Sony VTC5's are 10 bucks at illuminationsupply.

Intellicore i4 charger is $15.40 thru Amazon.

If you want to support your local B&M, go for it. Or, support them by buying $50 worth of juice from them with the money you saved.

u/thenry28 · 1 pointr/electronic_cigarette

The have intellicharger i4's on amazon too. http://www.amazon.com/gp/aw/d/B005UAI372

u/veryconfusing · 1 pointr/electronic_cigarette

I recently threw out what is likely the same charger you are referring to.
I replaced it with this. (Nitecore 4 slot charger) and it's one of the best cheap items I have ever purchased. The slide action on the adjustable slots is excellent and it's fast !

u/DustForVomit · 1 pointr/electronic_cigarette

You can get them at Amazon for $22.49, and 2-day shipping is free if you have Prime.

I would rather pay the extra $2.49 and get it faster and be pretty sure that I'm not going to get a vibrator instead.

u/Cygnarite · 1 pointr/electronic_cigarette

http://vapenw.com/sigelei-100-watt

http://www.amazon.com/Efest-Purple-2500mAh-Rechargeable-Batteries/dp/B00MJ8GJ92/ref=sr_1_3?ie=UTF8&qid=1420216277&sr=8-3&keywords=Purple+efest+18650

http://www.amazon.com/Nitecore-IntelliCharger-i4-Battery-Charger/dp/B005UAI372/ref=sr_1_1?ie=UTF8&qid=1420216331&sr=8-1&keywords=nitecore+4+bay+charger

75+35+16 = 126

Yeah, $126 <> $110, but I didn't exactly shop around either. I spent 5 minutes compiling that list. With a little googling and a coupon code, you could probably get that down to 115 without too much effort.

I may have been basing the 110 low end from some holiday sales prices I saw.

u/gizm0o · 1 pointr/electronic_cigarette

Charger - Nitecore i4

Batteries

I love my Vamo V3 in '350 mode when I want a simple setup on the go with my Protank and in '650 when im at home on the computer and I dont want to fog the place with my mech.

u/jongery · 1 pointr/radiocontrol

Nice find on the holders! I didn't even think about looking for holders like that... I just found these..

I currently have one of these. It would be so much easier and cost effective than purchasing another charger, and soldering up balancer leads on my diagram...

The Opus BT is really nice, I like the data screens for each individual cell.

Thanks!

u/hiphopopotamus1 · 1 pointr/electronic_cigarette

I just bought my RX200. The vape shop salesman did not say anything about this.

I purchased Aspire ICR 18650 High Discharge with it. Would this charger work? http://www.amazon.ca/JETBeam-IntelliCharger-Generation-i4-Charger/dp/B005UAI372/ref=sr_1_6?ie=UTF8&qid=1452223039&sr=8-6&keywords=18650+battery+charger

u/Xexist · 1 pointr/Canadian_ecigarette

Dunno if this charger or price is any good but hey. Free shipping. http://www.amazon.ca/dp/B005UAI372/ref=pe_386430_126088100_TE_item

u/dePeatrick · 1 pointr/Vaping101

I picked up an Intillicharger about 3 yrs ago after some looking around, still working fine...can't remember how much I paid for it but was on a budget and was pleasantly surprised how affordable it was.

This was the one.... Price here Under 20 bucks :)

u/funnychicken · 1 pointr/electronic_cigarette

From what I understand it's a lot more likely for the internal electronics to overcharge the batteries to the point of failure than an external charger. The other plus side to an external charger is that you can have a set of batteries that is always charged to you never get stuck with a dead mod. They're pretty cheap too: http://www.amazon.com/Version-NITECORE-i4-Intellicharge-Charger/dp/B005UAI372/ref=sr_1_1?ie=UTF8&qid=1449954397&sr=8-1&keywords=nightcore+i4

u/illuxion · 1 pointr/electronic_cigarette

zmax is a tad off. When I take batts out of my nitecore charger I get 4.1 with a zmax, 4.0 with and evic, 4.2 with a SID, but a NIST calibrated fluke 87 with Agilent leads tells the truth with this and in the charger.

u/FitChemist432 · 1 pointr/electronic_cigarette

sure, Here for a nice charger. This is the one i use and it was around $40 until a month ago. For batteries i suggest these, or these. For reference, they are both IMR chemistry batteries which is good, The price difference stems from the mAh difference. Having used both myself, the 2000 mAh efest will last just about all day (unless I'm partying or drinking) and is a good deal but the green ones are 3400mAh, giving you roughly 2 days per battery. Also noteworthy, the green ones charge in about three hours on the charger I listed.

You may be able to find better deals on the batteries out there but not likely for the charger. Because of this, I intentionally went with amazon, so you could save a bit on shipping.

Edit: added paragraph 2.

u/mudclub · 1 pointr/electronic_cigarette

http://www.amazon.com/Nitecore-IntelliCharger-i4-Charger-Generation/dp/B005UAI372 - $22.50 for the i4. That's in the realm of the reasonable.

I'm a fan of the Panasonic CGR18650CH 2250mAh battery, but I don't know batteries from a hole in my head. Those ones work well for me. $8ea is a pretty good price. I've seen them as low as $6, but that's highly rare. Amazon's where I usually get them - YMMV.

u/Zzedr · 1 pointr/ECR_UK

On the charger I have the nitecore i4 you can charge up to 4.35v I believe, well, that’s what it says on the screen.

I’ve gone ahead and ordered 4 batteries from Fogstar (amazing price and discount so thanks guys for the heads up), and will fully charge those batteries. The more I come to think of it, the more I think the batteries may just now be completely spent from constant charging only to 3.7 and nothing more.

So just to clarify one last thing, because I seem to be a complete mong when it comes to the batteries, the charger i have is this one:

Nitecore Intellicharge I4 V2 Universal 4 Channel Li-Ion/Ni-Cd/Ni-Mh Smart Charger
https://www.amazon.co.uk/dp/B005UAI372/ref=cm_sw_r_cp_api_6tQ9Bb7PNW8PK

I should charge at 4.2v as 3.7v is a nominal charge and the batteries can only charge up to 4.2v anyway right?

The 4.35v is just what the charger could charge up to but the batteries are limited.

If the above is correct I think I get you now and thanks for your help! Would just appreciate if you confirm

Cheers

Z

u/PUSSYANDMEMES · 1 pointr/electronic_cigarette

Sorry I really don't know what details to give. This is all foreign to me.

So this, this , and this
will start me off? Do you "build" this stuff? Sorry for not knowing anything please bear with me

u/jesus_h_pizza · 1 pointr/electronic_cigarette

For your Batteries? Nitcore i4, easily. It's got a safety cut out and great charge time, and it's the best value for the money. I love my Nitecore. Well built, definitely can see and feel the build quality between that and my old Trustfire.

Here it is on Amazon for cheap: http://www.amazon.com/Nitecore-IntelliCharger-i4-Battery-Charger/dp/B005UAI372/ref=sr_1_1?ie=UTF8&qid=1416037391&sr=8-1&keywords=nitecore+intellicharger+i4&pebp=1416037395738

u/Zak · 1 pointr/flashlight

The Nitecore/Jetbeam Intellicharger charges both Li-ion and nickel-based batteries, but I do understand not wanting to deal with extra stuff, which is why I suggested getting something with built-in MicroUSB charging.

u/shroom_throwaway9722 · 1 pointr/preppers

This one for USB (not sure about quality or reliability) or if you can figure out a way to get 12v out of your panels then get this one (well-built, far better)

u/dijoridont · 1 pointr/Vaping

https://www.amazon.com/Version-NITECORE-i4-Intellicharge-Charger/dp/B005UAI372

You can find it cheaper elsewhere, but a single bay charger won't help you in your current situation. No pun intended

u/supertofu · 1 pointr/flashlight

You can get a Fenix 18650 battery and charger at MEC (membership required). The Fenix battery is a "flat top", not all 18650 flashlights can use it. If you want to pay less for a charger, Amazon has the NiteCore i4.

u/zoident · 1 pointr/vaporents

Yes but I'm pretty sure it will charge pretty slowly, hell even the wall charger sucks. I suggest getting a http://www.amazon.com/Version-NITECORE-i4-Intellicharge-Charger/dp/B005UAI372 to use with your 18650s

u/beatcoder · 1 pointr/electronic_cigarette

Not a fan of the xtar because of the spacers. But the Nitecore IntelliCharger i4 Charger... butter.

u/Caleb323 · 1 pointr/electronic_cigarette

So I could just buy this, this, and this and it would work great?

u/x2kjok · 1 pointr/RBA

Do you have an ohm meter? You will need one to make sure you build safely.

Magnet switch:

I was thinking fatdaddyvapes but the fusion mods link is much cheaper.

Full transparent tank:
Tank + chimney + top cap $5:

https://www.fasttech.com/products/1570900

Charger: Nitecore i4 $15

http://www.amazon.com/Nitecore-IntelliCharger-i4-Battery-Charger/dp/B005UAI372

Battery: Sony VTC5 $10

http://captivape.com/sony-vtc5/

u/Infintely · 1 pointr/electronic_cigarette

Nitecore is recommended alot on this sub. I haven't used them myself but they seem to be very good and for a reasonable price. They have the 4 slot and the 2 slot available.

edit- Also 10 dollars is about what a good battery(sony vtc4) will cost you. You could probably find them a tiny bit cheaper but 10 dollars isn't bad.

u/LocalAmazonBot · 0 pointsr/electronic_cigarette

Here are some links for the product in the above comment for different countries:

Amazon Smile Link: Can be had for <$16


|Country|Link|Charity Links|
|:-----------|:------------|:------------|
|USA|smile.amazon.com|EFF|
|UK|www.amazon.co.uk|Macmillan|
|Spain|www.amazon.es||
|France|www.amazon.fr||
|Germany|www.amazon.de||
|Canada|www.amazon.ca||
|Italy|www.amazon.it||
|China|www.amazon.cn||




To help donate money to charity, please have a look at this thread.

This bot is currently in testing so let me know what you think by voting (or commenting). The thread for feature requests can be found here.

u/Justinicus · 0 pointsr/Skookum

CV will drop the current to keep the voltage at your set point (4.2V). CC is also known as "bulk charging". The CV phase is essentially topping it off. It's usually about the last 20% or so of the capacity.

So basically, you need a dedicated CC/CV charger (like a hobby charger or an 18650 charger), or a variable bench power supply -- very handy to have around. Or a good stable power source, a large variety of resistors, a good, solid handle on Ohm's Law, and a lot of time on your hands. I personally like a charger like the Nitecore i4 for my LiIon batteries.

u/aManPerson · 0 pointsr/electronic_cigarette

while i've never used batteries as big as his, i think this is a good charger that can handle whatever:

http://www.amazon.com/dp/B005UAI372/ref=wl_it_dp_o_pd_nS_ttl?_encoding=UTF8&colid=2DF7BE0I9DFDX&coliid=I2TIRRMN5HT0PH

u/Bag440 · 0 pointsr/electronic_cigarette

Okay then, seems I've started a shitstorm. I'll pick up a charger ASAP, but it's going to at least be a couple of days. If it bricks like you're all saying it will, I'll be sure to post something. Thanks everybody.

https://www.amazon.com/Version-NITECORE-i4-Intellicharge-Charger/dp/B005UAI372/

Hope that's sufficient, because I can't really afford much more.

u/Muffin860 · -3 pointsr/ecigclassifieds

Nitecore IntelliCharger i4 Battery Charger - 2nd Generation by Nitecore http://www.amazon.com/dp/B005UAI372/ref=cm_sw_r_udp_awd_8hXntb0H6B5FZ

17 and change shipped free for prime members.