Reddit reviews 3M - 051111976364 Dual Lock Reclosable Fastener TB4575, Black, 1 in x 10 ft

We found 14 Reddit comments about 3M - 051111976364 Dual Lock Reclosable Fastener TB4575, Black, 1 in x 10 ft. Here are the top ones, ranked by their Reddit score.

Trial bag version (1 in. x 10 ft.) of 3M Dual Lock Low Profile Reclosable Fastener SJ4575Great for small jobs, prototyping and design evaluationInterlocking mushroom-shaped heads provide strong, reliable and durable fastening that can be opened and closed multiple timesLow surface energy acrylic adhesive bonds well to a variety of substrates including metals, powder-coated paints and a broad range of plasticsStrong fastener secures with an audible snap, verifying closureAn alternative to screws and bolts, this hidden fastener provides a snug fit and smooth aesthetic appearance

Check price on Amazon

14 Reddit comments about 3M - 051111976364 Dual Lock Reclosable Fastener TB4575, Black, 1 in x 10 ft:

u/omally114 · 7 pointsr/raspberry_pi

Dual Lock is what you want. Hook and loop sucks because you have to keep your strips straight, with this, anything goes (and I literally have my 15 lb (7 kg) speakers hanging from the wall with this stuff).

It's magical.

u/SCMSuperSterling · 5 pointsr/guitarpedals

Never used it, but in my experience, suction cups don't seem to work very well on wood, even polished wood. On top of that, a lot of people are saying this stuff gets dirty pretty easily. I would just use 3m Dual Lock instead. I used velcro before, but it gets worn out, and my pedals tend to move and wiggle a little bit which I don't like.

u/Paul-Kersey · 3 pointsr/FiiO

I have my E6 attached to my Fuze with 3M Dual Lock. Here's a good article from InnerFidelity with some more information.

u/Super_Midget · 2 pointsr/CarAV

Velcro no... Dual lock yes. This shit will hold anything

http://www.amazon.com/gp/aw/d/B007OXK330/ref=pd_aw_sim_229_2?ie=UTF8&amp;dpID=51q78Sub96L&amp;dpSrc=sims&amp;preST=_AC_UL100_SR100%2C99_&amp;refRID=1QW6DNJM6AH2MEJDBQ2H

u/bswiftly · 2 pointsr/hoggit

One thought for an upgrade to replace packing tape. Velcro kinda sucks but 3m makes a great alternative. It holds my throttle down nicely.

3M Dual Lock Reclosable Fastener TB4575 Low Profile Black, 1 in x 10 ft (1 Mated Strip/Bag) https://www.amazon.ca/dp/B007OXK330/ref=cm_sw_r_cp_apa_i_Eti3DbY4RCZKP

It doesn't hold too well with vertical pressure, so might pop off easier than Velcro. But the horizontal strength is rock solid.

Might be a good way to snap your HOTAS in place.

u/cassinonorth · 2 pointsr/triathlon

> I've heard some people aren't happy with how much exposed cable there is (aerodynamics). Also that there are no top tube mounts.

Both of these are easily remedied with some double sided velcro. I bought the TorHans AeroX bento, threw a couple pieces on the top tube and the box and threw my Di2 junction box in there then heat shrinked the etube wires and brake cables together. It's not perfect but it's wayyyy better than what it originally was.

u/gimpwiz · 1 pointr/Justrolledintotheshop

Thanks.

I have two cars and three 'projects'.

One underhood project:

Electronically-switched oil accumulator (accusump). Just ignition-hot.
Subtle under-hood lighting (no rice - subtle - will be playing around with it. Might decide it looks like shit, and not do it.) Might also install a switchable work light in case something needs to be done at night.
My own version of a lojack that I haven't gotten around to building. Also, if possible, have it control a secondary fuel pump relay to make the fuel pump die; basically an interlock that makes the car seem broken instead of locked.

Two under-dash projects that are identical, one for each car:
Hard-wired radar detector
Hard-wired dash cam
Hard-wired USB outputs - one or two dual-12v-to-USB converters
Potentially the lojack-equivalent's battery charger (since it would have a separate small battery)

The hard part is figuring out where to get a non-fused 12V supply under the dash. An add-a-fuse circuit is very appealing and I should find places where an extra 5-10A won't pop anything, so I may end up doing one 5-10A-add-a-fuse on an ignition-hot line, instead of a 12v-master-fuse + ignition-hot-relay, as the single master fuse for all these.

Then it would just be a 15A strip terminal instead of a big fat 100A ground bar at the ground side, and a small fuse box at the positive side (with 1A or 2A fuses for each circuit, depending on their needs).

---

I really appreciate your feedback. The only reason I haven't already built all this is because of worries of fucking up and coming back to a smoldering ash heap.

---

I'm also figuring out how to mount all this securely under the hood... I figure these little wire clamps for the wires, and something like this velcro alternative to mount things like the fuse box, except it's hard to tell what temperature they're rated for (and it seems that the 3M stuff I linked will fall off due to heat.) Any ideas there? I want something that is 1) secure as fuck, but 2) that I could potentially remove without damage in the future, maybe using a heat gun or something. I would be mounting it mostly to plastic, but I don't want to drill any holes if possible.

u/mobile_monster_ · 1 pointr/oculus

Here is the mobile version of your link

u/Dent7777 · 1 pointr/microgrowery

u/phcullen · 1 pointr/whatisthisthing

https://www.amazon.com/gp/product/B007OXK330/ref=oh_aui_detailpage_o03_s00?ie=UTF8&amp;psc=1

u/Panasonicy0uth · 1 pointr/battlestations

It's expensive, but this 3M low-profile velcro is awesome and what I've used for everything from cable management on my desks throughout the years to fastening bulky guitar pedals (think around size and weight of a GTX1080) to my pedalboard that went through hell. TL;DR it's good.

u/sonic30101 · 1 pointr/hometheater

3M Dual Lock Reclosable Fastener TB4575, Black, 1 in x 10 ft https://www.amazon.com/dp/B007OXK330/ref=cm_sw_r_fm_apa_i_eQx0DbH235AQH

u/Machehz · 1 pointr/Ubiquiti

I beg you

u/Tylerismygod · 1 pointr/oculus

Would you recommend something like this too ?

http://www.amazon.com/3M-Dual-Lock-Reclosable-Fastener/dp/B007OXK330