Reddit Reddit reviews 3M 8293 P100 Disposable Particulate Cup Respirator with Cool Flow Exhalation Valve, Standard

We found 7 Reddit comments about 3M 8293 P100 Disposable Particulate Cup Respirator with Cool Flow Exhalation Valve, Standard. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Safety & Security
Safety Masks
Personal Protective Equipment
Safety Masks & Respirators
3M 8293 P100 Disposable Particulate Cup Respirator with Cool Flow Exhalation Valve, Standard
P100 Approved, NIOSH’s Highest Rated Filtration Efficiency in a Filtering Face Piece Respirator3M Cool Flow Valve Keeps Wearer CoolComfortable Face SealAdjustable Buckle Straps Help Provide a Secure FitAdjustable Nose Clip Reduces Potential for Eyewear Fogging and Helps Ensure a Better Seal and Fit
Check price on Amazon

7 Reddit comments about 3M 8293 P100 Disposable Particulate Cup Respirator with Cool Flow Exhalation Valve, Standard:

u/PangurBanHammer · 3 pointsr/chemtrails

I looked around for information on nanoparticles and respirators, and I found this paper. Basically, it seems that current normal respirator ratings are pretty valid for use with nanoparticles. If you want the most protection you can get then, you'll want an NIOSH N100 or P100 rated respirator, which means it blocks 99.97% or higher of all particles. Something like this should work, plus it's not as obtrusive as a bigger mask. So if you feel like that's what you want to do, I'd recommend that mask or something similar.

I personally don't believe wearing a respirator to deal with "chemtrails" is reasonable, but I won't try to change your viewpoint. Hopefully I've helped.

u/mattsah · 2 pointsr/SandersForPresident

Again, I will urge everyone here not to listen to any statements that say you should not bring a mask.

Get these: http://www.amazon.com/3M-Disposable-Particulate-Respirator-Exhalation/dp/B001BXRRH4

And these: http://www.amazon.com/Trainman-Bandanas-Jumbo-27-Bandana/dp/B0081K92PK

Combine.

Even if you intend to be peaceful and even if you just carry it with you until needed. Additionally, bring extra bottles of water not for drinking.

u/3AlarmLampscooter · 1 pointr/todayilearned

I think you should up to disposable P100s at a minimum, but IDK... not my lungs.

u/maverickmonk · 1 pointr/DIY

Like any safety gear:

  1. Anything is better than nothing
  2. No safety gear is 100%
  3. Everything is inbetween the two

    This is what I use, but I also use it for sanding bondo, painting (with different filters) and working with cutting/grinding G10 and fiberglass which is way nastier than wood.

    If you don't want to bother with a full respirator, the P100 is a good doctor-type cloth mask

    If you really look into it and are the paranoid type though, you'll realize your chance of trapping any of the 30nm and smaller dust particles are basically 0, which can be a problem because they're the ones that get deep into the lung tissue. But anything like the above will work fine for trapping the bigger stuff. People spend thousands of dollars on systems to trap or get rid of the smaller particles, but unless you're a serious hobbyist, ie: exposed for many hours a day, it's overkill. Source: Working on a dust collection system for my grinder with exterior vents and basic filtration. It's a pain in the dick.

    Best way to minimize the risk? Do it outside. Dilution is the solution for pollution. This isn't a post to scare people so much as remind them that literally everything can be hazardous in some way. Just take regular precautions to minimize the risk and enjoy what you're doing.
u/bloodthirstyhooligan · 1 pointr/Israel

There are masks you can buy, the filters however have to be replaced often and they can be quite expensive, but if you plan on staying in Jerusalem, then I guess you have no other choice.

https://www.amazon.com/3M-Disposable-Particulate-Respirator-Exhalation/dp/B001BXRRH4

This one is relatively cheap and is a p100 mask, meaning it should filter at least 99.97% of airborne particles to be certified as such. You may need to adjust it though so that it fits properly, any mask will be useless if the fit is not correct for your face.

https://www.amazon.ca/3M-2097-Particulate-Filter/dp/B00328IAO0/ref=pd_lpo_vtph_328_bs_lp_t_1?_encoding=UTF8&psc=1&refRID=518B5SNTGTSPTRE1KCPE

These are the filters for the mask.

u/botulizard · 1 pointr/Detroitcityfc

I looked into that mask, but it said it wouldn't get here for over a month. This respirator isn't that much more expensive, has good reviews for smoke, and will get here faster. It doesn't look badass like a full-on gas mask, but it should do the job.