Reddit Reddit reviews 3M Personal Protective Equipment Large Half Facepiece Reusable Respirator 7503/37083(AAD), Respiratory Protection, Large

We found 14 Reddit comments about 3M Personal Protective Equipment Large Half Facepiece Reusable Respirator 7503/37083(AAD), Respiratory Protection, Large. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Safety & Security
Personal Protective Equipment
Safety Respirators
Safety Masks & Respirators
3M Personal Protective Equipment Large Half Facepiece Reusable Respirator 7503/37083(AAD), Respiratory Protection, Large
Advanced Silicone Material for Increased Comfort and Greater DurabilityProprietary 3M CoolFlow Valve Helps Makes Breathing Easier.Connection Type:BayonetDual-Mode Head Harness Adjusts Easily for Either Standard or Drop-Down ModeExhalation Valve Cover Directs Exhaled Breath and Moisture Downward to Reduce FoggingColor Coded to Indicate Size (Small, Medium or Large) for Easy Identification
Check price on Amazon

14 Reddit comments about 3M Personal Protective Equipment Large Half Facepiece Reusable Respirator 7503/37083(AAD), Respiratory Protection, Large:

u/crazy4cheese · 5 pointsr/woodworking

I use this respirator that vents down. Never causes my glasses to fog. I'm sure any respirator that vents down will avoid the issue.

u/dave9199 · 3 pointsr/preppers

For 30 bucks... A 3m chemical respirator is a lot more bang for the buck than shitty expired military gas masks...
https://www.amazon.com/3M-Facepiece-Respirator-Respiratory-Protection/dp/B008MCUULW/ref=zg_bs_2257619011_19?_encoding=UTF8&psc=1&refRID=M12PTCEMHQ1BF4M9G3DX
And some filter packs.
If you want to step it up. These run about 100 bucks. This is what people exposed to toxic fumes use.
https://www.amazon.com/3M-Respirator-6800-Respiratory-Protection/dp/B007QY8WTY/ref=sr_1_1?s=industrial&ie=UTF8&qid=1485791341&sr=1-1&keywords=3m+6800

u/kmc_v3 · 2 pointsr/sanfrancisco

I bought a half-face respirator and some P100 filters yesterday and they're supposed to arrive tomorrow. I already have some N95 so this is just an upgrade.

u/Enchelion · 2 pointsr/SeattleWA

It's not sexy, but if you want proper protection and comfort, go for a respirator. For smoke protection, you really want a P100 filter.

u/ycnz · 2 pointsr/woodworking

Agreed on the 3M dust mask - I use http://www.amazon.com/dp/B008MCUULW/ref=biss_dp_t_asn

with the P100 filters. It made an incredible difference. I can sand all day, be covered head to toe in dust, but feel fine.

u/atetuna · 1 pointr/mildlyinteresting

That's a good one. I have the same one, this SKU. If I'm trying to keep stuff out of my eyes, I use these goggles. I like that the full foam surround helps filter out particulates. It works, but having separate goggles makes it somewhat inconvenient, so I'm wanting to try out the full face version.

u/CrockerCulinary · 1 pointr/KitchenConfidential

i hear ya. props to you for caring.

chemicals are an issue. i try to avoid them as much as possible. consistent daily cleaning, elbow grease, a good scrubby or steel wool, and good old fashioned soap can do most of the work and keep those ovens shiny and new looking. if you think you definitely need the chemicals daily, buy a couple respirators and filters, (they arent expensive, like 20 bucks) as well as goggles and gloves. make it policy to wear them anytime they use harsh chemicals and enforce that policy. sleep soundly.

respirator-https://www.amazon.com/gp/product/B008MCUULW/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

that being said, there are a lot of respiratory land mines in the kitchen- smoke, grease in the air, flour and other particulates can all cause problems as well as chemicals.

u/coda_hale · 1 pointr/BAbike

I’ve got one of these and it’s fine: https://www.amazon.com/gp/product/B008MCUULW/

u/glwilliams4 · 1 pointr/woodworking

I starting using this mask with these filters a few weeks ago and it's made a world of difference for me. I just hate having to wear it for hours after I've made dust because it's all floating around.

u/bobbertmiller · 1 pointr/woodworking

It's very comfortable and the P3 filters work surprisingly well even against odors. It's a bit of a problem with my glasses and it's impossible to wear eye protection that goes OVER your glasses (as this thing covers most of the nose).
The one linked is very expensive compared to other offers on amazon. This one still needs the filters so buy those too.

u/Whit3W0lf · 1 pointr/trashy

Can you tell me about VOC and respirators? If I was applying a liner that is 2.6 VOC, what does that even mean? Is something like this enough to be safe?

I am out of my element.

u/Pseudomotive · 1 pointr/woodworking

So, just to clarify - if I were to purchase one of these: http://www.amazon.com/dp/B008MCUULW/ref=biss_dp_t_asn, I would get this cartridge (http://www.amazon.com/3M-Filter-Adapter-2000-Series/dp/B003MOMTEG), and insert these filters inside (http://www.amazon.com/3M-R-2091-Particulate-Filter-4-Pack/dp/B0009XYN7O)?

Also - how long does a pair of filters last? How often do you replace them?
Do you wear the mask at all times in the shop? I won't have dust collection for quite some time, but the ~monthly leafblower to the garage workspace technique, along with frequent shop-vaccum use will probably be in my future.


u/Silound · 1 pointr/turning

Some people swear the HF chisels are good for starting, I don't agree with that sentiment because neither set includes a bowl gouge which is the essential tool in, you guessed it, bowls! Most people at least give bowl turning a try, even if that's not their primary interest. Definitely read up on the safety issues at play between spindle roughing gouges and bowl gouges. If you want to turn bowls, you will need either a carbide tipped tool, a very good scraper, or a bowl gouge. The wiki details the tradeoffs about carbide vs traditional; I favor traditional because that's how I learned.

That mask is too flimsy to really offer much protection. I suggest this model which is also conveniently spacious enough to wear with this respirator using these filters under it. Breathing protection is as important as other forms of safety, especially when sanding!

Please be safety cautious and remember that the mast will protect you from small particles, chips, and moderate fragments during turning, but it will offer you zero protection against something like a bowl that comes flying off the lathe. Stand out of the line of fire!