Reddit reviews 3M Scotch 5952 VHB Tape: 1 in. x 15 ft. (Black)
We found 15 Reddit comments about 3M Scotch 5952 VHB Tape: 1 in. x 15 ft. (Black). Here are the top ones, ranked by their Reddit score.
3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. It comes on a red film release liner.3M 5952 double-sided tape (heavy-duty 45-mil) gives you the simplicity and ease of a tape fastener and is perfect for many indoor and outdoor bonding applications. 3M double-sided tape (automotive, heavy-duty applications) can, in many cases, replace liquid adhesives, rivets, spot welds, and other permanent fasteners.Note: It is recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load. Rough surfaces may require additional tape.Carrier/Backing: closed-cell acrylic foam. Adhesive: modified acrylic. Release Liner: red PE film. Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner).Adhesion: 320 ounces per inch (to stainless steel test panel). Tensile Strength: 90 pounds per inch (longitudinal). Service/Operating Temperature: up to 250F. Application Temperature: 50F to 100F. Core: 3-inch diameter.
3m VHB 5952 is what you want
Unfortunately everything I find comes on rolls with far more than I know what to do with. On the plus side you shouldn't run out any time soon.
3M VHB tape. This stuff will stick to anything and will go down to sub zero temps. Make sure everything is dry when applying and prep all the surfaces that the VHB tape sticks to with 3M 94 tape primer.
​
https://www.amazon.com/3M-Scotch-5952-VHB-Tape/dp/B01BU7038A/ref=sr_1_4?ie=UTF8&qid=1549918879&sr=8-4&keywords=3M+VHB+tape
​
https://www.amazon.com/3M-Primer-94-02oz-Vinyl/dp/B005LDKTV6/ref=sr_1_1_sspa?ie=UTF8&qid=1549916087&sr=8-1-spons&keywords=3M+94+primer&psc=1
​
Search for "3M VHB Black". You can get a roll and cut it to size.
Example https://www.amazon.com/3M-Scotch-5952-VHB-Tape/dp/B01BU7038A/
This is more than you'd need, but its general purpose adhesive that will come in handy for other purposes. This is the same adhesive used on gopros mounts.
If you don't wanna spend so much, get this and trim it a bit. https://www.amazon.com/Adhesive-Pads-Gopro-Helmet-Mount/dp/B00EFTP2YQ/
here ya go
This is the same tape but you get twice as much material for $2 more
Look for 3M Scotch 5952 VHB Tape: 1 in. x 15 ft. (Black) https://www.amazon.com/dp/B01BU7038A/ref=cm_sw_r_cp_apa_i_CgH3CbR1PN0F6
Its exactly what you want.
If you use 3M's VHB tape, it has an rating for 90° C during use. It's the same tape used for putting up some road signs. It's also the same adhesive use on the Dual Lock Reclosable Fastener (Heavy Duty Velcro) to attach electronic toll collection tags to car windshields.
3M Scotch 5952 VHB Tape: 1 in. x 15 ft. (Black) https://www.amazon.com/dp/B01BU7038A/ref=cm_sw_r_cp_apip_mI8CZO4gVAsfR
That stuff works wonders. I used 4 strips and it is up there haha.
I had a problem with the original PS tape as well, it stuck for about 20 mins before it came off. I work in an automotive test lab and we use 3M’s VHB double sided tape for sticking instrumentation and other stuff inside and out side of cars. It sticks even inside of hot cars and outside in cold weather. This is what I use on my pop socket and leather case. Just use an alcohol wipe to clean the surfaces.
FTFY:
It is 3M double sided mounting tape. Specifically, either this: Scotch Extreme Mounting Tape, 1-inch X 400-inches, Black, 1-Roll (414-LONGDC) - 414-LONG/DC https://www.amazon.com/dp/B00FUEN2GK/ref=cm_sw_r_cp_apa_i_SDlGDbQE76Q91
Or
3M Scotch 5952 VHB Tape: 1 in. x 4.6 meters. (Black) https://www.amazon.com/dp/B01BU7038A/ref=cm_sw_r_cp_apa_i_qElGDbGTXMETR
_____
^(I'm a bot) ^| ^Feedback ^| ^Stats ^| ^Opt-out ^| ^(v5.0)
It is 3M double sided mounting tape. Specifically, either this: Scotch Extreme Mounting Tape, 1-inch X 400-inches, Black, 1-Roll (414-LONGDC) - 414-LONG/DC https://www.amazon.com/dp/B00FUEN2GK/ref=cm_sw_r_cp_apa_i_SDlGDbQE76Q91
Or
3M Scotch 5952 VHB Tape: 1 in. x 15 ft. (Black) https://www.amazon.com/dp/B01BU7038A/ref=cm_sw_r_cp_apa_i_qElGDbGTXMETR
Very much the same story here - after the part cools, it just comes off (takes some adjustment, of course). You can have it on the MPMD for pretty cheap: Glass ; Tape
You could use double sided tape like this: https://www.amazon.com/3M-Scotch-5952-VHB-Tape/dp/B01BU7038A/ref=sr_1_3?s=industrial&ie=UTF8&qid=1517867355&sr=1-3&keywords=3m+vhb
The con is that you might not be able to remove it so easily. This stuff is pretty extreme.
Did you save it, or is it gone? It can be reattached if not lost or damaged. Get some of this stuff to replace the original tape.
3M VHB tape is the best
VHB stands for Very High Bond, it sticks amazingly well to smooth surfaces like a kwad frame but when you want to remove it you can peel it off pretty easily. It isnt going anywhere when you fly. It is also a little foamy so it provides a little cushion bten the carbon fiber and electronics.
https://www.amazon.com/dp/B01BU7038A/ref=cm_sw_r_em_apa_i_hQ4jDbV2SB64H