Reddit reviews 3M Super Strength Molding Tape, 03614, 1/2 in x 15 ft

https://www.amazon.com/3M-03614-Scotch-Mount-Molding-Tape/dp/B002JOVUO0

This is the stuff used in GoPro mounts and you can find it at any auto parts store or Home Depot - maybe even Wal-Mart.
It held my GoPro onto the side of my bike doing 180 down the back straight of COTA so I would think it'll hold some LED strips on, plus it doesn't leave a nasty residue when you remove it with some rubbing alcohol and dental floss.

This, it's like tape. www.amazon.com/3M-03614-Scotch-Mount-Molding-Tape/dp/B002JOVUO0/ref=pd_sim_263_1open_in_new

3M 03614 Scotch-Mount 1/2" x 15' Molding Tape https://www.amazon.com/dp/B002JOVUO0/ref=cm_sw_r_cp_apa_T4OuzbQ28WMT9

This should work. Beware it has a little thickness to it. Might be a bit overkill

I believe the noise is created when the reverse lockout ring makes contact with the inside of the shift knob. I took off my shift knob and placed some foam tape on the inside of it to absorb the vibration and I have no more noise.

This is what I used.
https://www.amazon.com/gp/product/B002JOVUO0/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1

Oh, that thing. Use some 3M automotive trim tape to stick it back on. Glue is not going to work well and make a mess of your frame.

​

https://www.amazon.com/3M-3614-15/dp/B002JOVUO0/ref=sr_1_2?ie=UTF8&qid=1542223349&sr=8-2&keywords=3m+auto+trim+tape

I used the L bracket method along with some automotive body molding mounting tape. With the tape alone I was unable to pull the tables back apart.

Edit: Figured I should give links to the tape and brackets I used.

Tape

Brackets

You can get either of them at pretty much any hardware store, or auto parts store. Although they will be a bit more expensive.

If it's the touchless kind then yeah. I used this 3M adhesive to install them and it's insanely strong.

The car washes with big brushes would probably scratch the hell out of them just like they do to your paint. You really shouldn't use those things.

Specifically either of these should work fine:

http://www.amazon.com/3M-38583-Exterior-Attachment-Tape/dp/B00JR4D7AA/

http://www.amazon.com/3M-03614-Scotch-Mount-Molding-Tape/dp/B002JOVUO0/

Walmart usually carries both and any auto parts store too.

3M 3614 1/2" x 15' 0 https://www.amazon.com/dp/B002JOVUO0/ref=cm_sw_r_cp_api_i_klZSDb5TREH44

3M 03614 Scotch-Mount 1/2" x 15' Molding Tape https://www.amazon.com/dp/B002JOVUO0/ref=cm_sw_r_other_awd_I-qRwb0XJE18E

3M body moulding adhesive. Just plan on setting aside plenty of time if you ever want to remove the lightstrip.

Looks like this. https://www.amazon.com/3M-03614-Scotch-Mount-Molding-Tape/dp/B002JOVUO0

Can be bought at AutoZone too. Has a red backing but the tape is black

https://www.amazon.com/Oak-Leaf-Waterproof-Decoration-Multi-colors/dp/B01E3JWOEI

Led Strip.

https://www.amazon.com/Nexlux-Wireless-Controller-Working-Android/dp/B07116SX41

Original receiver sucks, I got this which allows for more features (like syncing to music) and can be controlled with my phone.

https://www.amazon.com/gp/aw/d/B002JOVUO0?psc=1&ref=yo_pop_mb_pd_t1

Original backing tape wasn’t the strongest, so I used that to stick it on.

3M automotive double sided adhesive, thank me later.

My first thought (although a somewhat off-label use) would be 3m VHB trim and molding tape like this: https://www.amazon.com/3M-3614-15/dp/B002JOVUO0. As long as both surfaces are perfectly clean (as in wipe them down with alcohol before applying), I'd be shocked if it didn't hold up as least as well as whatever the holder came with. It's fairly ridiculous stuff.

I'd go with something like that being somewhat flexible over an epoxy of any sort, the flexibility might help it last longer. I would bet that 3M 5200 would work as well (it's a marine adhesive sealant) but it'd be more of a PITA to work with than the VHB tape.

This stuff would work, maybe? https://www.amazon.com/3M-3614-15/dp/B002JOVUO0?th=1&psc=1

You can purchase 3m VHB tape from any automotive shop like Autozone or Oreilly's. Or you can purchase online Amazon or eBay.

https://www.amazon.com/3M-3614-15/dp/B002JOVUO0/ref=pd_cp_263_2?pd_rd_w=JrmWN&pf_rd_p=ef4dc990-a9ca-4945-ae0b-f8d549198ed6&pf_rd_r=RWNW0JS1E97V0ZSEQF1R&pd_rd_r=b32cd8a4-66e7-11e9-8627-41445435c50e&pd_rd_wg=7onNN&pd_rd_i=B002JOVUO0&psc=1&refRID=RWNW0JS1E97V0ZSEQF1R

I would contact their CS team and see what they say.

I like using adhesive for fans too. 3M makes a high strength adhesive tape used for attaching trim on cars. http://smile.amazon.com/3M-03614-Scotch-Mount-Molding-Tape/dp/B002JOVUO0
5 foot should be plenty, but it's really not that much more to buy 15 feet. Just some small squares on the corner and they won't come off without some serious pulling.

Best tape for the job

This is the one I got from Amazon. Not sure how the OEM spoiler is shaped on the underside as mine is a different aftermarket spoiler, but this size should work for you. There are videos on YouTube you can check out for prepping and tips on applying it.

super strong magnets and some 3m automotive adhesive

www.kjmagnetics.com

http://www.amazon.com/3M-03614-Scotch-Mount-Molding-Tape/dp/B002JOVUO0/ref=sr_1_1?s=automotive&ie=UTF8&qid=1398014445&sr=1-1&keywords=3m+automotive+tape

3M. Do NOT use super glue!!!

This tape will work too. Also available in 1/2 inch. Follow the instructions to the letter.