Reddit reviews ACM Economy Wash Bottle, LDPE, Squeeze Bottle Medical Label Tattoo (250ml / 8oz / 1 Bottle)
We found 8 Reddit comments about ACM Economy Wash Bottle, LDPE, Squeeze Bottle Medical Label Tattoo (250ml / 8oz / 1 Bottle). Here are the top ones, ranked by their Reddit score.
Wash bottle used to wash labware and to store washing solutions, such as acetone or deionized waterLDPE body for flexibility, elasticity, and impact, stress-cracking, and moisture resistance, and is lightweightBoston round shape for applications that require a rounded body, short neck, and narrow mouth to store liquid samples and solutions, and dry materialsPolypropylene screw closure with its angled stem and draw tube molded in one piece for leak-proof applicationsSpout can be cut back to increase the flow of washing solution
I water mine with this: ACM Economy Wash Bottle, LDPE, Squeeze Bottle Medical Label Tattoo (250ml / 8oz / 1 Bottle) https://www.amazon.com/dp/B00WTHLR18/ref=cm_sw_r_cp_api_i_6M-BDbHY9AXQJ
It鈥檚 awesome!! Good luck 馃憤
has anyone used this style for butt washing? most ul bidet solutions are just nozzles that attach to water bottles, but I cant get over the mental hurdle of getting my water bottle near my asshole everyday. thinking I want something with a dedicated bottle: ACM Economy Wash Bottle, LDPE, Squeeze Bottle Medical Label Tattoo (250ml / 8oz / 1 Bottle)
​
how's the squirt? what size would be best? any lighter options (this one says 1.12oz)?
Washing my face while getting everything wet irked me too, so I looked on ebay and found my solution. I nowuse a "lab wash bottle" with a bent spout. Mine is around 500ml. Here is one similar @ amazon. I fill it up once then turn off water at sink. Once I wipe off my oil cleanser, I lather up my foaming cleanser in my hand & after massaging my face to clean it, I just bend over sink and point the nozzle at my face & squeeze bottle to rinse my face. It's super easy & I don't waste water. No wet sleeves or floor. :)
I don't like Skurka's method. I use force.
Enter this bottle: [backcountry bedet]( https://www.amazon.com/Economy-Bottle-Squeeze-Medical-Tattoo/dp/B00WTHLR18/ref=sr_1_4?keywords=scientific+wash+bottle&qid=1572882853&sr=8-4 )
The top cap screws on perfectly to a smartwater bottle. That is the only thing I bring and I think it weighs .4oz. When I have to do the deed, I dig a hole, poop then have a smartwater bottle with this thing screwed onto the top. I just invert it, aim and blast my b hole. Using about .25L I can get squeaky clean in all but the worst conditions. I generally use 1-3 squares to dry up and make sure that I am GTG.
WAY more effective than just waterfalling down your ass crack.
Maybe stop by a laboratory supply store and grab a lab squirt bottle, I hate rubbing anything on a pcb that might leave little bits behind (even though people use q tips all the time,) though it's likely this residue won't simply lift away. Spray bottle will be good for in the pci-e slot and such.
https://www.amazon.com/Economy-Bottle-Squeeze-Medical-Tattoo/dp/B00WTHLR18/ref=asc_df_B00WTHLR18/?tag=hyprod-20&linkCode=df0&hvadid=198059287844&hvpos=1o1&hvnetw=g&hvrand=12565168165468540085&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9019550&hvtargid=pla-385033840497&psc=1
Totally disassemble everything and spray it down. Consider doing it over a tray to recapture the alcohol for reuse if it's not overly cloudy, and finish with a rinse using fresh alcohol.
Pretend like this is a brand new PC. you just acquired all the parts to put it together, but there's one tiny jumper SOMEWHERE on the board that will short everything and brick it. You just gotta clean it all and it's a perfect PC again!
Also a chance to redo that annoying bit of cable management that you didn't notice you messed up, and was too minor to take it apart for.
As the other comment said, Isopropyl Alcohol. It's recommended you get something higher than 90%. A bottle of 91% IPA is available at Walmart for $2.50. I bought that 32oz bottle when I first got my printer and I've maybe only used about 2/3 of it so far so it'll last you quite a while.
I dispense mine from a squeeze bottle like this onto the print bed and then wipe it down with a clean paper towel. Feel free to ask more questions if you have any. I'll be happy to answer :)
That's my assumption too, that the roots are still shallow. Perhaps alternating between top and bottom watering for a while would help encourage them to grow out without causing dehydration? I use a precision squeeze bottle like this and it does help with avoiding leaves to an extent: https://www.amazon.com/Economy-Bottle-Squeeze-Medical-Tattoo/dp/B00WTHLR18/ref=sr_1_10?keywords=squeeze+bottle&qid=1572211503&sr=8-10
ACM Economy Wash Bottle, LDPE,... https://www.amazon.com/dp/B00WTHLR18?ref=ppx_pop_mob_ap_share
I use this to keep the plants that like their soil to stay moist, or plants that don't like moisture on their leaves! Really handy little tool