Reddit Reddit reviews Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02), Black

We found 134 Reddit comments about Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02), Black. Here are the top ones, ranked by their Reddit score.

Computer Networking
Electronics
Computers & Accessories
Powerline Computer Network Adapters
Computer Network Adapters
Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02), Black
ECB6200 MoCA ADAPTER USES A HOME'S EXISTING COAX WIRING to create a fast, reliable Ethernet connection between a router and any device with an Ethernet port. With speeds up to 1 Gbps, Bonded MoCA 2. 0 outperforms wireless for speed, latency, reliability, and security.ENHANCE YOUR HOME'S WI-FI NETWORK coverage with the speed and reliability of a wired network.USES THE SAME COAX CABLES AS YOUR CABLE TV OR FIBER-OPTIC SERVICE, with no interference. Is not compatible with: Direct TV, Dish or other satellite TV, AT&T Internet, and AT&T U-verse coax networks.COMPATIBLE WITH ANY ETHERNET ROUTER and with virtually any device that has an Ethernet port including Blu-ray, Xbox 360, PS3, streaming media devices, digital audio streamers, computers and more.EASY SETUP, with no need for configuring the MoCA Adapter or re-configuring your router.Any purchases made through non-authorized resellers voids or does not include manufacturer’s .
Check price on Amazon

134 Reddit comments about Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02), Black:

u/ewleonardspock · 22 pointsr/GoogleWiFi

Wow, literally every comment in here so far is wrong...

Yes, OP, you can use the coax in your house for networking. What you’re looking for are MoCA adapters. I use them for backhaul between my pucks and they’re just as fast as Ethernet.

The only situation where they won’t work is if you have Satellite TV. DVB-T and MoCA don’t get along. If you have cable TV, though, you’ll be fine.

u/KingdaToro · 8 pointsr/HomeNetworking

The key points of home networking to keep in mind:

  1. There is always exactly one router, and it is always connected directly to the modem. The purpose of a router isn't Wi-Fi, it's to direct traffic between different networks (such as your home network and the internet). A router has no purpose if it's only connected to one network. The term "wireless router" just means "router with built-in access point", the access point is what does Wi-Fi.

  2. If you need to add more Ethernet ports, get a switch and connect it to the router with Ethernet.

  3. If you need more Wi-Fi coverage, get an access point and connect it to the router (or a switch that's connected to the router) with Ethernet. Don't get another router or an extender/repeater.

  4. Only use Wi-Fi for devices that don't stay put, such as phones, tablets, and laptops. Anything that stays put, such as TVs, game consoles, streaming players, desktop PCs and printers should have a wired network connection if at all possible.

    Of course, all those points assume you're able to run Ethernet wherever you need it. That's always the best option. If that's not possible, these are your options in order of best to worst:

  • MoCA. This is basically running Ethernet over Coaxial lines, which most houses already have installed. It's just as fast as Ethernet, but it is expensive, a pair of adapters (and you will need a pair unless your router has it built in, as FiOS ones do) will run you over $150.

  • Wi-Fi Bridge. This is the opposite of an access point, instead of connecting wireless devices to a wired network, it connects wired devices to a wireless network.

  • Powerline. This sends data over electrical wires. It's pretty bad, avoid it.

    What you should never, ever get are Wi-Fi repeaters/extenders. They halve the speed of anything connected to them, as they can't communicate with the router/AP and devices at the same time. For such a device to run at full speed, it needs either a wired connection to the network (this makes it an access point) or wired connections to devices (this makes it a bridge).

    So, what you should do is connect all the devices of your entertainment center to a switch. Make sure it's a gigabit one. Then, connect this switch to your router by the best means possible. Ethernet>MoCA>Wi-Fi Bridge>Powerline. If you need Wi-Fi coverage here as well, get an access point and connect it to the switch as well.
u/determined_warrior · 7 pointsr/HomeNetworking

I have MoCA adapters working with Verizon FioS. Its awesome. MoCA 1.1 gives 175 Mbps shared.

I have them next to each TV (3 total). Much better than Wifi. I do not see ocassional drops I used to see with wifi earlier.

I have had ocassional (may be 4 times in 8 years) when I have to reboot the moca adapter as it got out of sync but very rock solid otherwise.

I use Actiontec MoCA 2.0 adapters - no-referral Amazon link: https://www.amazon.com/dp/B013J7O3X0/

u/Nerdnub · 7 pointsr/homelab

Yes, you can. You'd use a couple MoCA (Multimedia over Coax Alliance) adapters, with one on each end. This should allow you to push ethernet over your Coax. Having never done this myself, it should work fine in theory, but other factors like cable quality and length will probably come into play.

Here's a link to a pair you can purchase on Amazon: Link

u/carlyman · 7 pointsr/buildapc

https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0 -- I've found better prices tho. Just plug into coax and then treat it like an ethernet port; you can have multiple adapters on the coax "network."

u/tangobravoyankee · 6 pointsr/homelab

I keep hearing good things about these MoCA 2.0 adapters. MoCA has been around quite a while, it works, and the latest generation stuff is actually gigabit fast.

As someone who has used three generations of powerline stuff, definitely stay away from it unless you have no other alternative. On a good day I see 60Mbps from the "1,200Mbps" adapters and they need to be cold reset (unplugged) after most power flickers.

u/acles003 · 6 pointsr/PUBGXboxOne

These blow powerline adapters out of the water.

Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02) https://www.amazon.com/dp/B013J7O3X0/ref=cm_sw_r_cp_apa_8bLFAb4AZ4KYJ

u/jfarre20 · 5 pointsr/pcmasterrace

I recommend MOCA 2.0 over those. I have a bunch at home and they work very well. However, You do need coax run to where you are planning to put your stuff - and it works better when you run it detached from the cable tv network.

edit:fixed url

u/Sullacuda · 4 pointsr/HomeNetworking

Unless the cabling has been cut or otherwise disconnected inside the walls you most certainly should be able to use MoCa adapters to bridge ethernet through any available coax outlet in your apartment. I use actiontec double bonded moca 2.0 adapters and get ~980mbps across the existing coax in our house.
https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0

Useful to run ethernet from fiber terminal in the front of the house to a switch in the back that provides ethernet to server, two smartTvs, nas, printer and an AP providing signal to outdoor cams

u/dauntlessTech · 4 pointsr/HomeNetworking

MOCA is worth the investment. You just need a cheap router from goowill to blanket the house with WiFi. I use this one

u/HWTechGuy · 4 pointsr/HomeNetworking

Something like this. Basically, it will let you run an ethernet connection via coax.

https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0

​

I am sure others can chime in regarding the specifics of setting it up with your Comcast service. I haven't had Comcast or run MOCA in years, but it did work very well when I did.

​

u/caller-number-four · 3 pointsr/Charlotte

You don't need all that.

Order this - https://www.amazon.com/gp/product/B013J7O3X0/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

One plugs into the switch near/on/in your router and the other end goes on to your remote room. From there you can plug the 2nd adapter onto a switch or an AP or whatever. Wammo blamo.

No new MoCA router required.

u/IceDevilGray-Sama · 3 pointsr/buildapcsales

I've been using a pair of these to get internet to the second floor from my basement and they work wonders. You should also buy a POE Filter to put in where your coax enters the house.


Then you plug one into your router and attatch the coax. If you have a cable box, it has a built in splitter to let you hook that up too. Then you plug coax into the other one in the place where you want internet, and then the ethernet cable into your device.

u/IphtashuFitz · 3 pointsr/Tivo

If you have a spare ethernet port on your router or the "splitter" you mention (I'm assuming a switch) then all you need is an ethernet cable from the switch/router to the port in the wall that runs to the bedroom, and a second ethernet cable running from the mini to the ethernet port in the bedroom wall.

If you'd rather use a MoCA connection then you'd need to buy a MoCA adapter like one of these, along with a Coax splitter & some coax pigtails, and run an ethernet connection from your switch/router to the MoCA box, and connect the MoCA box to your existing coax using a splitter.

So ethernet will be much less expensive considering you already have a run between the two rooms that you can use. And you don't gain or lose anything by going with ethernet over MoCA. I've been running ethernet between my Romaio (recently upgraded to a Bolt) and a Mini for a few years now.

u/porksandwich9113 · 3 pointsr/Fios

Err..idk what /u/Ryao is selling you, but MoCA isn't that bad, and it certainly doesn't have a higher latency than WIFI!

As long as your FiOS speed is 100/100 or below, you can expect to get your full speed over even the shittiest of Coax cable, it can even generally do 150/150, but Verizon will default to an Ethernet install because it can vary based on your home's condition.

MoCA 1.1 has a PHY rate of about 275mbit (give or take depending on wire condition, length,etc) and you can expect to do about 175mbit over it no problem.

I believe most if not all ONTs are still on 1.1. This will be limiting if you plan on doing transfers over a local network. (I.E. you have a networked storage or something similar).

Rather than running your whole networking coming from the ONT over Coax, I recommend buying a bonded MoCA adapter pack and creating your own, much faster MoCA network.

These do MoCA 2.0, which is a PHY rate of 1.4Gbit, with real world speeds near 1Gbit.

https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0

You plug one end into your router, then tap it into the coax network, then the other end wherever you want your network extension to end. You can either run it to a single device, or you could add a switch/or second AP at the end location.

You can buy as many as the adapter as you want and put end points in different locations if you want a wired connection in those locations.

The one I linked can do gbit assuming your coax is in decent condition.

This guy here tested this specific model and was able to full 104-108MB/s over his network with them.

https://www.reddit.com/r/HomeNetworking/comments/3iei9m/my_initial_impressions_of_the_actiontec_ecb6000/

u/RansomOfThulcandra · 3 pointsr/techsupport

You can do it yourself.

Assuming none of your existing equipment supports MoCA, you can get a two-pack of adapters like one of these:

Edit: Note that MoCA 2.x is newer and faster than MoCA 1.x, but other than that they work the same, and are compatible with each other.

  • https://www.amazon.com/dp/B013J7O3X0

  • https://www.amazon.com/dp/B019MDRX5A

  • https://www.amazon.com/dp/B008EQ4BQG

    If one of the devices already supports MoCA (TiVO, some Verizon modems, etc), you can just get a single adapter instead of the two-pack.

    You'll also need to get MoCA-rated splitters for your basement (or wherever the cable lines in your house run to). Either get one with as many outputs as your existing splitter and replace it completely, or get a smaller one and use it to split the signal from your main splitter into the cable for each room where you want to use MoCA. You want something like these, but there are many options with different port counts:

  • https://www.amazon.com/dp/B00558UJTO

  • https://www.amazon.com/dp/B00556LI1E

  • https://www.amazon.com/dp/B01M34OZ2S

    Finally, you need a Point-of-Entry filter to prevent your MoCA signal from leaking out to your neighbors through your cable connection. You put it on your cable line before your splitter(s) and it blocks the MoCA signal from passing through:

  • https://www.amazon.com/dp/B00DC8IEE6

  • https://www.amazon.com/dp/B01M4ODQTS


    Edit: My setup is cabled as follows:

    The cable tv / Internet line enters my home in the basement. I have the Point-of-Entry filter screwed onto the cable, and then into a MoCA splitter. Coax cables run from the splitter to various rooms in my house.

    In the room with my modem and router, I have a cable from the wall jack to the "coax in" side of a MoCA adapter. I have a short cable from the "tv/stb" side of the MoCA adapter to my modem. There is an ethernet cable from the modem to the WAN port on my router (this gives my router its Internet connection), and then an ethernet cable from a LAN port on the router to the ethernet port on the MoCA adapter (this gives the MoCA network access to the Internet).

    In the room with my TV, I have a cable from the wall jack to the "coax in" side of another MoCA adapter. I have don't actually use cable TV service (just Internet), but if I did, I would have a cable from the "tv/stb" side of the MoCA adapter to my TV. There is an ethernet cable from the MoCA adapter to my Roku to provide it with Internet access through the MoCA network.

    I actually use this adapter: https://www.amazon.com/dp/B00CZ6WC3A by my TV rather than one of the smaller ones, because it has four ethernet ports instead of one. I bought it before MoCA 2.0 devices were available. If you only have one ethernet port on your adapter but need to connect multiple devices, you can get a small network switch instead. I was just trying to avoid extra boxes next to my TV.
u/taylorwmj · 3 pointsr/HomeNetworking

This will be your best bet. You'll take a ethernet cable out from your router/switch into one of these and then coax out to the wall. From there you'll place another near the device(s) you need better coverage with and take the coax from the wall into the other of this device, and then plug the ethernet from the MoCA adaptor into your other device or switch.

https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0/ref=sr_1_1?ie=UTF8&qid=1482101870&sr=8-1&keywords=actiontec+moca

u/washu_k · 3 pointsr/HomeNetworking

The first one is a DECA adapter. It only works with cable that is either not active or has satellite service. It does not work with cable that has an active TV and/or Internet signal on it. It is also limited to 100 Mbps.

The 2nd one is an old MoCA 1.0 adapter so also limited to 100 Mbps. You should get a 2.0 adapter, they are much faster.

https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0/

u/whiteyonenh · 3 pointsr/DataHoarder

If you have coax cable runs for Cable/Satellite TV, MoCa might be an option. I'm unsure what the max speeds are on it, but it should be much more consistent than powerline. If you have TV via the cable company or an OTA antenna setup you'll need a MoCa entry/POE filter (to prevent the signals from leaving the house), and you'll want to use at least MoCa 2.0 to get near 1Gbps speeds. I haven't personally used the adapters, but if you're willing to try it, and have existing coax runs, buying them from a place that has a good return policy would be what I would try. If you have DirecTV, there's also the DECA adapters (don't use these on a cable TV setup, they'll mess with TV/Internet reception because of the frequency/spectrum changes made to make these work on satellite systems.)

Something like these could work out well IMHO. Reviews seem OK, and Amazon has a decent enough return policy. https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0/

u/ryanhollister · 3 pointsr/Ubiquiti

moca is the answer. I was all EoP but needed to get top speed to a second building ~200ft away and these moca adapters worked awesome with easily 500mbps.


Actiontec Bonded MoCA 2.0... https://www.amazon.com/dp/B013J7O3X0?ref=ppx_pop_mob_ap_share

u/rehehe · 3 pointsr/homeautomation

I have a house with several buildings and the stucco construction (with chicken wire in the walls) screws up most signals.

Of everything I have (wifi, rf, etc) my 4 Lutron Smart Bridge Pros are the best at connecting to devices over distance. It's really impressive.

I do use plug in dimmer to reach to a Serena shade that was having intermittent disconnection issues. You can have one dimmer as an extender per smart bridge.

Another useful trick is positioning the hub more centrally. I don't have ethernet cable in my walls, but I do have coax to around 10 locations. I use MoCA 2.0 adapters to do coax to ethernet throughout the house. I'm not sure what real world speed they top out at, but I can max my fiber (around 600 up and down) over the coax, so I'm happy. I mainly use them as a wired backhaul for my Velop mesh wifi, but I have one in a location just for a Lutron Smart Bridge.

u/kmlweather · 3 pointsr/Fios

Based on some DSLReports users giving me some advice - it looks like I may have FiOS run ethernet only to the primary router (it's most important that one receive the gigabit service. And use these https://www.amazon.com/dp/B013J7O3X0?ref=emc_b_5_t at the existing coaxial drops for the other routers - those are not as important to get the full gigabit.

u/Calmiche · 3 pointsr/DirecTV

Correct information. The DECA's are 100mb devices, under ideal conditions. 4k video on the DirecTV system pulls about 50mb per second. There's no need for them to be faster.

There are faster ones, but since you need more bandwidth, you can't have a satellite signal on the same line.

https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0/ref=pd_sim_147_5?_encoding=UTF8&psc=1&refRID=1ZBFVTNC0BKZZ019H7BQ

However, these devices can interfere with your cable modem. It's better to use a straight through piece of coax, rather than one that's tied into your coax splitter.

u/epyon22 · 3 pointsr/pcgamingtechsupport

It can be inconsistent. I've found moca adapters over coax to be much better. I got the high end ones that can do a full gigabit but that's probably over kill for only gaming so you can go with the slower ones. A long Ethernet cable is probably going to be your cheapest most reliable option.


These are the ones I have:
[Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack] (https://www.amazon.com/dp/B013J7O3X0/ref=cm_sw_r_cp_apa_yXxCybMS7Y46V)

u/michrech · 2 pointsr/HomeNetworking

Avoid the powerline adapters. They are unreliable/slow, at best. Also, unless the 'extender' can act as a dumb wireless access point, ditch it, too. They typically re-broadcast whatever wireless signal they're attached to which generally knocks your available bandwidth down by half.

What I'd do if I were in your shoes, making the assumption (I know, I know) that you indeed only have the two cable outlets:

  1. Connect the modem / router to one of the two -- it doesn't matter which.

  2. Obtain a pair of MoCA adapters. I know they're a bit more expensive than powerline, however, they work far better than powerline, and are generally able to push data at much higher rates than powerline adapters (in addition to coax being designed for data where power lines were not). Depending on how old your house is, you may need to replace any coax splitters with newer models that support the frequencies used by typical data connections -- these are pretty cheap).

  3. Place one of the MoCA adapters at the router, connect it to the coax TV cable

  4. In the other location where you have a coax connection, connect the other MoCA adapter and a switch/AP (or a router that can be configured for WAP mode).

    If you have coax connections elsewhere in the house, you can add MoCA adapters (you can buy them individually -- the link I provided is for a two pack), and to those adapters, wireless access points, to help shore up any wireless weak / dead zones. If you can / need to add APs to all four floors, set the basement to channel 1, first floor to channel 6, second floor to channel 11, and the third floor on channel 1. This (at least for 2.4GHz) will keep each AP from interfering with each other, though depending on how close your neighbors are, they may hate you for having so many WAP's... lol
u/coffeesippingbastard · 2 pointsr/HomeNetworking

was your house pre-wired for cable TV?

You can use MOCA adapters which seem to be generally have higher throughput and don't have the noise issue you get when running powerline.

http://www.amazon.com/gp/product/B013J7O3X0/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=1944687582&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B008EQ4BQG&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1FSV5P4QQ0QY061JXAK1

u/porkchopnet · 2 pointsr/HomeImprovement

Professional network engineer here.
Much of the info so far in this thread is correct. Cat5/5a/6 is your best solution for stability and performance, and you can take any one of those 3 standards to 100meters per spec, and practically you can go slightly beyond that if needed. Mesh wireless is cool, but configuration can be intensive. Power line... sucks. Reliability is the biggest killer to me.

But nobody has mentioned MoCA.

If you have FiOS (or similar fiber delivered services), the “backpack” on the side of your house (properly called an ONT) communicates with your router in the house over MoCA which runs over the Cable TV coax. 2.5gigabit, and you can have up to (I think) 26 MoCA bridges on the same channel. About 15 channels available, and every bridge on the same channel is on the same network.

So it’s kind of like your power line adapter, but solid as all hell. If you have coax in all locations, this is the way to go. Bridges are available on Amazon, I just bought two more of these: https://www.amazon.com/gp/aw/d/B013J7O3X0/ (yeah that price is a downside).

Here’s more than you ever wanted to know: https://en.m.wikipedia.org/wiki/Multimedia_over_Coax_Alliance

If your internet is cable delivered, you may wish to look at a “MoCA blocker” (also called a low pass filter) to prevent other people in your neighborhood from jumping on your network. If you use FiOS, that’s not a problem.

u/samplebitch · 2 pointsr/techsupport

I did this and it worked well - until I moved the cable modem from one room to another. I've heard the connection/quality of your electrical lines affects the connection, so individual results can vary wildly. I then heard about MoCA - while a little more expensive it works MUCH better. It uses the coax in your house to transmit data. So my HTPC in the living room gets speeds just as fast as being wired to the cable modem directly. I also set up an old router as a repeater so wireless reception is better on that end of the house as well.

These are what I purchased and they work great.

u/NotBillNyeScienceGuy · 2 pointsr/HomeNetworking

I suggest buying a UAP for the main house, if it's centrally located you should be OK. I have the UAP-LR and a very large house with marble floors and thick walls and it gets most the house.

Run an Ethernet cable to the guest house and setup another UAP there. You could use a MoCA Adapter to do this (since you apparently have one). Don't put two routers on the network, imagine the MoCA adapter as just extending the Ethernet cable.

You could also continue using your router supplied wifi and just use the uap for the guest house. I suggest 2 UAPs and a ubiquiti cloudkey or a computer running the controller to avoid interference issues.

u/larrylarrington03 · 2 pointsr/HomeNetworking

Use MOCA if you can't get Ethernet to the second AP

u/good4y0u · 2 pointsr/PFSENSE

There are MOCA adapters, just do a MOCA to Ethernet. I use this (got it cheaper then the listed price...on sale) https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0 It works perfectly.

*you want BONDED adapters

You only need ONE MOCA on the pfsense end, I used 1 there and had 3 in other rooms, for a total of 4 MOCA's.

FIOS ONT -> pfSense -> Switch -> MOCA _0 --> [ in wall coax] -> Br1 MOCA -> computer

--> [ in wall coax] -> Br2 MOCA -> Switch -> 4xDevices

--> [ in wall coax] -> Br3 MOCA -> Switch -> 4xDevices

All were getting gig speeds.

​

Even if you used multiple MOCA's on the pfSense end, it would all still be limited by the COAX in the wall, if it didn't conflict.

u/mistur_niceguy · 2 pointsr/xboxone

Actiontec is one of the primary vendors in this area. A few things to keep in mind:

  1. If you have any cable splitters between the two MoCA adapters, you need to make sure they support the MoCA frequency range.

  2. Place a MoCA point of entry filter at the main coax tap coming into your home to block external household MoCA traffic from coming in and interfering, as well as to prevent your MoCA signals from exiting your house.

    A few sample devices:

    https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0

    https://www.amazon.com/Filter-MoCA-Cable-Coaxial-Networking/dp/B00DC8IEE6

    https://www.amazon.com/Holland-Electronics-GHS-2Pro-M-Splitter-5-1675Mhz/dp/B00P6VHLP0/

u/zutroy · 2 pointsr/HomeNetworking

I don't believe that will work. You need the moca adapter before the modem. Anywhere it comes out of a wall jack, the first thing it should connect to is a moca adapter.

My setup is coax out of the wall --> moca adapter --> modem

Then ethernet from moca adapter --> router --> modem

This is with these adapters - https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0

u/LS6 · 2 pointsr/nova

This is way more than $12, but these Have worked really well for me. (4-600mbps range)

Bonus if you have TV is they're backwards compatible with whatever version of MoCA the STBs use so they'll get them online too.

u/jibjibjib · 2 pointsr/Comcast

There's multiple options for using your in-wall coaxial for wired networking. The specific option you would use usually depends on what TV provider you are using over that coax

  • If you have cable, you can get MOCA adapters which will send the network traffic over your coaxial cable in a way that does not conflict with your cable TV service.
  • If you have DirecTV, you can get DECA adapters, which are essentially the same thing as MOCA but compatible with the DTV signal on the same cable.
  • If you have an IPTV service like Uverse, you can get HPNA adapters.

    I'll assume you have cable here since we're in the Comcast sub. Setup for each of them is essentially the same though. A MOCA adapter usually has one Ethernet port and two coaxial ports (one to the wall, and one to the TV). If you want to plug in more than one device in your room, you will need to use a switch in that room. Having two coax ports means you can use the wall coax for both TV and networking simultaneously.

    You need at least two MOCA adapters, one in each area you are trying to network. I would expect you would put one in the room where your existing router is, and the other in your room. I have a set of Actiontec bonded MOCA 2.0 adapters that do gigabit over coax, but there are also cheaper older versions that do about 300 mbps. MOCA supports mesh networking too, so if you want to add any additional rooms to your network, just add another adapter to that room, and it will be able to see the other two (or more) rooms.

    Once everything is plugged in, it should just work. There was no configuration I had to do on mine, they just immediately saw each other.
u/zeke009 · 2 pointsr/Tivo

With satellite not being used, check out MoCA. IMO, it is way more reliable than WiFi. They will require a bit of an investment.

​

I bought these a few years ago, they work really well: https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0/ref=sr_1_3?keywords=MoCA+adapter&qid=1558476543&s=gateway&sr=8-3

Amazon Search: https://www.amazon.com/s?k=MoCA+adapter&ref=nb_sb_noss_2

​

Prior to the Actiontec devices, I was using some MoCA 1.1 devices from Netgear. If it wasn't for the sale a few years ago, I'd still be using them.

​

If you go with MoCA, you may want this filter at the entry point: https://www.amazon.com/Filter-MoCA-Cable-coaxial-networks/dp/B00KO5KHSQ/ref=sr_1_3?keywords=MoCA+filter&qid=1558476808&s=gateway&sr=8-3

u/RolandMT32 · 2 pointsr/HomeNetworking

The house does have coax. I had heard of moca but hadn't really done much research into that. Would it be better to buy some adapters like the ActionTec Bonded MoCA 2.0 adapters or would these passive adapters work okay?

u/FlightyGuy · 2 pointsr/homelab

You just need some MOCA adapters to create a MOCA network. The Adapters have ethernet ports:

PC --- MOCA ===COAX=== MOCA --- PC

https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0

How-Tos abound:

https://www.actiontec.com/products/home-networking/ecb6200/

https://www.instructables.com/id/How-to-set-up-a-coax-MoCA-network/

u/onastyinc · 2 pointsr/GoogleWiFi

orbi is a beast on speed, but googles app is better. The app has some downsides, like when the cloud barfed a reset a bunch of our units.

I have my onhub/GW in wired gigabit backhaul mode and it outperms pretty much everything. if i didn't have gigabit backhaul I would have kept orbi.

Another option since you're already using MoCA. Check out these actiontec bonded MoCA adapters you can use that to backhaul GW and potentially get the best of both worlds.

u/brad2017 · 2 pointsr/DataHoarder

I have a MoCa 2.0 bonded and I get 500-600 Mbps thru my gigabit internet connection using speedtest. My powerline got 50-60 so imo MoCa is much better if you can use it.

What I'm using:
https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0/

u/gbrayut · 2 pointsr/geek

The adapters usually include a splitter. So you can still use the same coax lines for Ethernet and cable TV. Also you want to add a MoCA filter on the main line coming into the house, so the internal traffic doesn't leave your home. I got these + the filter in the frequently bought section and they have worked very well on a 100ft coax line out to my garage https://www.amazon.com/dp/B013J7O3X0/ref=cm_sw_r_cp_apa_QamZBbQBYGYPX

u/arkhira · 2 pointsr/pcmasterrace

Yeah they can get expensive. Usually its used by most to bring internet between floors and not to use an adapter in every room.

u/zeta_cartel_CFO · 2 pointsr/HomeNetworking

Regarding the Moca 2.0 - do you have the actiontec bonded Moca 2.0 modules?

Secondly, do you have a splitter on your coax line? Because after removing a splitter from my line and using a direct cable, my speeds jumped to about 800-850 mbps. Before that it was around 500-600 mbps.

u/JonPaula · 2 pointsr/buildapc
u/GoodOmens · 2 pointsr/Fios

For internet only, ditch the FIOS router and get a pair of bonded devices (e.g., these). The FIOS router MoCa port is limited to ~500mbit. You should hit 850+ with the ones I linked (provided you don't have too many spliters etc).

u/takaides · 2 pointsr/eero

I have Eeros and am a big fan, but it sounds like you need some hardwired connections. One option that worked well for me was using the preinstalled coax cable in my last apartment. Every room seemed to have coax hookups, and I could run it over the same coax that spectrum was running my internet connection on.

What you'd want is a MoCA adapter (or really, at least 2, one per end) to inject ethernet over coax and then pull it off elsewhere in the house. Had 450Mbps at my Xbox 2 floors away from the modem, and an eero beacon on the other side of the room for wifi devices.

I used these from Amazon with great success. You'd also want to put a high-pass filter on the incoming connection from the street to keep your network private.

As for wiring it up: Modem <--> Eero <--> MoCA <--> Coax Cable (the same one the internet was going to the modem on) <--> MoCA (in another room on a different floor) <--> switch <--> TV, Xbox, Receiver, etc. And the filter on the coax splitter outside coming from the street.

u/drnick5 · 2 pointsr/HomeNetworking

Ok I get what you're saying now.

If everything is working fine in the theater, I don't think you gain much by moving the cable modem behind there.

One other option, instead or unning a cable, is to use something like these Moca Boxes. This would allow you to create a network connection using your homes Coax cable. (if you've ever used a powerline ethernet box, its a similar idea, you put one box downstairs, and plug into coax, put another box upstairs and hook into coax. both boxes also have a network port and will link together). So in your case, put a moca box near the theater TV, put another upstairs, hook network cable from moca into router/switch downstairs. Upstairs, hook that moca box into the ubiquiti injector, and then hook the injector into the access point. You could try this route first, if it doesn't work, send the MOCA boxes back and then run a cable.

The only time this doesn't work is if you have cable or direct TV, and use a "whole home DVR" which also uses a MOCA connection, as they will likely interfere with each other. (although some have been able to get it to work)

As far as switches, you don't need to spend a lot, I really like the Netgear switches for the price. Something like this should work fine.

u/Keeloi79 · 2 pointsr/HomeNetworking

Those are not MOCA adapters, those are meant specifically to connect DirecTV boxes to a router using an Ethernet cable. You actually need MOCA adapters which are about $100/set.

https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0/

https://www.amazon.com/Kiwee-Broadband-Bonded-Ethernet-Adapter/dp/B071ZW8N4Q/

u/ShaunRMiller83 · 2 pointsr/Ubiquiti

I have the UAP-AC-Pro since I can not run wires in my walls.

I tried Powerline adapaters to meh success. I got a MoCA adapter and it works really really well.

https://www.amazon.com/dp/B013J7O3X0/ref=cm_sw_r_cp_api_9Ei1Ab10Y5YFP

u/judgedeath2 · 2 pointsr/homelab

I have a pair of these:

https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0

My house was prewired with coax fucking EVERYWHERE when I bought it. I get like 600-700 Mbps over them, which is plenty for my home needs. Very reliable. Not rackable, but you can stuff em almost anywhere. One of mine is double-sided velcro'd to the ceiling in the (not finished) basement.

EDIT: I have the original MoCA 2.0 ones (ECB6000). These are a newer bonded version that can get >1 Gbps, which is cool

u/Knoxie_89 · 2 pointsr/HomeNetworking

I was referring to: https://imgur.com/a/BKx6u0s

So after re-reading and looking again at the pictures. I think your best bet would be to have a professional come run ethernet if you really want it. Or go wit ha MOCA setup.
https://www.amazon.com/dp/B013J7O3X0/ref=sspa_dk_detail_0?psc=1&pd_rd_i=B013J7O3X0&pd_rd_wg=N3c6z&pd_rd_r=85NH0R4PPGXA79BF1VGY&pd_rd_w=m5emt

u/captain_dylan_hunt · 2 pointsr/HomeNetworking

No doubt direct Ethernet runs where ever possible to dedicated AP's if budget allows. what about using MCOA adapters?

​

Push Ethernet over your coax that runs to various parts of the house. Actiontech has lots of positive Amazon reviews, sure the guys here can give you others or better suggestions

u/kalamiti · 2 pointsr/homelab

Wow, I didn't even know this was a thing. I'll need to look at our coax wiring, but this might be the best throughput speed solution and I'm pretty sure out coax comes into the garage and splits from there, so it should work. Also looks like it'll be double what I'd pay for powerline though.

It looks like the Actiontec ECB6200 is currently the only product on the market that gives around gigabit speed, and supposedly the most recent firmware has fixed the speed issues it was having. $163.45 is a bit pricey though.

Has anyone used this that can comment on it?

u/chuccck · 2 pointsr/HomeNetworking

I just tested moca in my new house and got 450-550 Mbps. I would suggest at least testing out moca first to see if it fits your needs. If you only have the 2 computers to wire, then you would be spending $260 on a pair and a single of these

u/OnceUponNeverNever · 2 pointsr/homelab

what about moca 2.0? do you have coax installed in the apartment? https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0

u/largepanda · 2 pointsr/buildapc

Unless you have a super cheapo unit, it's the house wiring. This is why /r/HomeNetworking hates powerline ethernet units.

Is your house wired for coax? If so, you can get a pair of MoCA adapters to run internet.

Or just suck it up and run cat6 through the walls somehow.

u/samwheat90 · 2 pointsr/HomeNetworking

First, don't go by the antenna bars, they aren't 100% accurate. Download a speed test app, and test the speed strength when you're in your room compared to being next to the router.

I can't imagine losing that much signal strength from being down the hall. You can try moving your router closer to the middle part of your place.

Your current router isn't the latest and greatest, but it is dual band, so I would definitely setup the 5ghz network as well. 5ghz is stronger and usually has less traffic on the frequency, but it doesn't do well with distance. If you have newer phones (iPhone 5 and better), they should have an antenna for 5ghz and might improve your speed. You can easily google if your devices are compatible. Most should now be.

If that doesn't work you can look into getting a MoCa or a Powerline adapter. Don't get a wifi extender, those are crap. Also, I wouldn't bother with any new "mesh network".

If you really need to strengthen your wifi signal, it's always the best bet to run an ethernet cable and setup an Access Point (AP). This is usually the least preferred option for most people because they don't want a cable running down their hallway, or don't want to deal with the hassle of running it through the walls.

u/coopdude · 1 pointr/YouShouldKnow

You might be waiting some time then. They were on sale for around $124 a couple weeks back for the kit on Amazon with a $20 "clipped" coupon on the product page, but then the base price of the kit went up to $164 (net $144 with the coupon).

Lowest price seen on Amazon for the kit was $120.99 in August 2016

u/tomhaverford · 1 pointr/Fios

I have this: https://smile.amazon.com/gp/product/B013J7O3X0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

It lists that it would support up to 1Gbps. Whether or not that is theoretical I would not know until I hook it up. My question was more geared towards whether or not I can even get MOCA in a set up without TV service.

u/Vuzrak · 1 pointr/ffxiv

You could try a MoCA Network Adapter like http://www.amazon.com/gp/product/B013J7O3X0 if you have a coax connection at where your computer is.

u/nukem2k5 · 1 pointr/HomeNetworking

Screw it. Just ordered a set of these.

u/MrLuthor · 1 pointr/HomeNetworking

I've gotten both units to light up with coax signal however on my desktop when I connect to the LAN it still tells me no internet connection and unidentified network.

That being saidI'll have to try that setup tomorrow. I've stayed up until one am setting up a medical bed for my mother, and I'm beat.

I purchased this action here

u/motonack · 1 pointr/HomeNetworking

If you have coax connections in range you can use MoCa adapters which will get you full gigabit speed. The Actiontec Bonded MoCa 2.0 adapters work flawlessly. https://www.amazon.com/gp/aw/d/B013J7O3X0/ref=dp_ob_neva_mobile?th=1&psc=1

u/ennui_myway · 1 pointr/helpdesk

This has worked for me: Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02). you can get it on Amazon, here. You can even hook up a second modem and broadcast upstairs with this solution.

u/fryfrog · 1 pointr/Ubiquiti

I think if you connect them all wired, get them configured and then put them where they belong... they'll wirelessly uplink. But I'm not sure and I've never tried it. Performance would also be abysmal.

Do you have coax in your house? If so, you could make a MOCA network and get them wired up that way. It'd be way faster and more reliable than a wireless uplink. Something like a [Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter] (https://www.amazon.com/gp/product/B013J7O3X0/) might get you what you want.

u/devilbunny · 1 pointr/HomeNetworking

If you have coax cable in both locations, MoCA is a much better choice. In my experience, both more reliable and faster. Actiontec ECB-6200 (here is a pair for just $120).

u/nitrouspray · 1 pointr/cordcutters

Using a WiFi signal & repeating it to carry out broadcast won't be best option in my opinion. If you don't have Ethernet in your room or anywhere in the house, and if you can't install any cables in the home, do you have any coax in the home? Its the wiring you use for cable tv or satellite. If so, you can buy these adapters or you can get these other adapters which also works well but more cost effective.

u/SpaghettiFan1995 · 1 pointr/pcmasterrace

https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200S02/dp/B013J7O3X0/ref=cm_cr_arp_d_product_top?ie=UTF8&th=1


This looks promosing. Reviews say only 3ms latency is added from normal ethernet usage.


What do I make of this?


" These could definitely be cheaper, but for the performance, I can't really complain too much. I will say that you DEFINITELY need to grab a POE filter to put on the line coming into the house to block any of your traffic from making it to your neighbors, as well as some MoCA compatible splitters depending on how everything in your home is wired. "

u/OJRacer · 1 pointr/homelab

Do you have access to coax cables at both locations? I've been tossing around the idea of using one of these moca adapters to hard link my desktop and my server across my apartment.

https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0/ref=sr_1_3?keywords=moca&qid=1555693575&s=pc&sr=1-3

There's a used one for $131 plus 20% with amazon's sale this week. Lon of LonTV uses these all over his house and has great results with them.

u/genxer · 1 pointr/techsupport

I use a Linksys AC1900 on the 5GHZ band. I have no issue maxing out my 110 meg connection.

I've also had good luck with MOCA adapters....

u/Aspirant_Fool · 1 pointr/techsupport

You have a few options:

  • You could buy a beefier router. Your Netgear C3000 is a combo modem/router, and they're generally trash. A dedicated modem coupled with something like an AC3100 would give you better performance and coverage. If the Peloton and TV have spotty connections now, this might be enough to get them stable.
  • A mesh system with enough nodes to cover the area you want covered. Netgear Orbi and Linksys Velop work well, cheaper options like Google WiFi are okay. Setup is pretty simple, but you'll have more little boxes around the house.
  • You could use MoCA adapters to re-use the coax wiring in the house. This option is a little bit cheaper than just getting a better router or a mesh system, but it's a lot less flexible, and if the current router doesn't already live in the closet with the coax, it's messy.
u/wonger007 · 1 pointr/cordcutters

Not quite sure what your solution is...
I will write up a simple something on what I will be doing and you let me know....

I will have two dedicated lines into the basement...

Line 1 = OTA antenna which will go into an HD Homerun Connect device which will go into a MOCA 2.0 adapter out to an 8-way splitter.

Line2 = Comcast Cable from street into 8-way splitter

8-way splitter - https://www.amazon.com/gp/product/B01M34OZ2S:

cable in = Comcast line with filter - https://www.amazon.com/gp/product/B01M4ODQTS

out #1 = Coax Cable from MOCA adapter for the OTA antenna - https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0/

out #2 = Office with 2-way splitter (modem, router, moca adapter)

out #3 = living room with moca adapter, router (AP mode) and TV

out #4-8 = bedrooms #1-5

2-way splitter - https://www.amazon.com/gp/product/B0113JAN8K/

cable in = 8-way splitter out #2

out #1 = modem which cat5e to a router (Asus RT-AC68U) then to MOCA Adapter

out #2 = Moca Adapter

I hope this helps draw up my picture. I do have a NAS in the office which hosts plex for the HD homerun and stuffz.

I know this can work, but if there is a better way let me know (I rather have modem in office than in the basement before the 8-way splitter).

u/minnesnowta · 1 pointr/HomeNetworking

Have you looked into MoCA adapters? If your house has coax cable run to multiple rooms, you can get near gigabit speeds via the newer MoCA adapters via your existing coax/cable TV cables. If so, you can have your router in one room and hook up an access point across the house in a different room assuming both rooms have coax jacks.

Edit: here's a link to gigabit moca adapters on amazon

u/rebelx · 1 pointr/HomeNetworking

Sounds good!

I believe you're talking about this Motorola MoCA adapter?

One review suggested the Actiontek brand instead, due to some issues with the Motorola. There's about a $32 difference, so I'll have to see if that's justified.

Funny that Moto just went up in price by about $20 just a couple months ago after being at the $118 price point for almost a year!

Now I just need to figure out how and when to use the MoCA filters. If it's required that I plug one on the outside of the house (where the cable box is), that's not something I can do. If it's inside the home, I can do that.

u/pixel_of_moral_decay · 1 pointr/Fios

You can get a set of these:

Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02) https://www.amazon.com/dp/B013J7O3X0/ref=cm_sw_r_cp_api_q8vGzb3CVRJ9Y

Moca is capable of gigabit (or nearly). Verizon is trying to cut install costs with the gigabit upgrade, so you have to use Ethernet or your own hardware.

u/drueburgendy · 1 pointr/Fios

There are plenty online and videos to watch, you could even run the cable outside your house and then back in, there is also a device that turns coax cables into Ethernet via and adapter! Supports 1Gigabit too, here is the link: Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02) https://www.amazon.com/dp/B013J7O3X0/ref=cm_sw_r_cp_api_McuGzbZ1TSNMX

u/9sW9SZ189uXySHfzFVFt · 1 pointr/HomeNetworking

The best configuration for your system is to put a dedicated router (a router without built in wifi) in the closet and put wireless access points where you want them. You should also put a switch in the closet that connects to all of your ethernet jacks. For example, if I was doing this, I would put a Unifi USG and Unifi Switch 8-150W in the closet and then Unifi UAP-AC-Lite's in the living room and the bedroom (the switch will power the access points using power over ethernet).

Another option is to use a MoCa adapter as the second run for the Google Wifi, assuming you also have coax cables at each outlet.

A third option is to put a Google Wifi in the closet and set it to be the router (turn the wifi off if you can) and then put additional Google Wifis in the living room and the bedroom.

You probably already know this, but Google Wifi is mainly meant to be a mesh system meaning the wifi units communicate back to the main unit wirelessly. You can hardwire the units together but if you can do that, then you're probably better off going with another solution like Unifi.

As the other commenter said, don't use powerline for anything. It's awful.

u/trae · 1 pointr/HomeNetworking

If you have coax runs (cable tv) you may be able to use them for ethernet with MoCA.

u/jmajorjr · 1 pointr/xboxone

Over coax gives you amazing speeds. I use them in two rooms of the house. One for the xbox one. I have the older units from Actiontec Ethernet over Coax however a newer one is out.

u/niceflipflop · 1 pointr/HomeNetworking

> we go have coax ports all over, but neither of the routers have coax ports in them :/

This is expected. Routers don't have coax ports. Modems do. What I meant was, if you could move your modem to a more central location, then your router could go with it.

If you have a coax port in your room that is connected to the port where your modem is currently getting its signal, then you can use a pair of MoCa adapters on either end to provide a wired connection to your room.

If the price doesn't scare you, then explore this sub for more details on MoCa. A full discussion on how to use it properly is carried out daily around here. It's a very common question.

If the price is too steep, then your options are...

  1. If there's a coax port in your room and it gets internet from your ISP, move the modem and router there. If you're the only one that requires a hardwire, and the wifi is still strong enough for your roommates, problem solved.
  2. Find a coax port somewhere else in the house that gets internet AND is on the same electrical circuit and try Powerline again.
  3. Try a wifi extender. Spoiler alert: these are garbage and you will likely get garbage results.

    From another thread:

    >I may try using a wifi repeater/extender. I just need an ethernet cable with Internet to find its way into my room.

    I'm not following you here. First, if you're extending WiFi, then what's the ethernet for? And second, you already said running ethernet thru the house isn't an option.
u/PerestroikaPal · 1 pointr/HomeNetworking

Gotcha, in this MoCA set on Amazon:

Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02), Black https://www.amazon.com/dp/B013J7O3X0/ref=cm_sw_r_cp_apa_i_kOmUCbQAXC5MQ

There is the coax in and a TV/STB out. Sounds like the coax would come out of the MoAC through the TV/STB out and proceed to the cable modem, right?

Thank you for taking the time to read and answer my many questions, I sincerely appreciate it.

u/ryaniskira · 1 pointr/ATT

Don't use powerline, route an ethernet cable or if your house has coax use a [MoCA adapter.] (https://www.amazon.com/dp/B013J7O3X0/) Also, only use CAT6 ethernet cables, and if possible use your own router.

u/illuxion · 1 pointr/pcmasterrace

a token ring adapter? What are you looking to do specifically?

If you're looking to run ethernet over coaxial you'll need a pair of MoCa adapters, or slower DirecTV variant DECA adapters.

Here's 200Mb DECA for $23

100Mb DECA for $16

670Mb MoCa adapter pair for $125

or if you have 2 cable runs, 1400 Mb bonded MoCa for $150

u/Eillera · 1 pointr/homelab


https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0
The speeds can run up to gigabit and most rooms seem to have a coax port ran to them. If there are going to be multiple devices you can attach an AP to the moca adapter to get wifi upstairs too.
If you don't want to run something like that you could look into https://www.amazon.com/Ubiquiti-UAP-AC-M-US-Unifi-Access-Point/dp/B01N9FIELY/ and you could just add more as you find you need more coverage around the house

u/didnt_reg · 1 pointr/buildapc

If you have coax cables in both rooms, you could use one of these: https://www.amazon.com/gp/product/B013J7O3X0/

​

I have a similar set up in that I have my router in the living room and my desktop in my office. I have coax in both rooms, but no cat5 connection. I used those MoCA adapters and they work wonderfully (including streaming games from my desktop back to my living room). You will also want to invest in a MoCA filter as well. I think this is the one I got: https://www.amazon.com/Filter-MoCA-Cable-Coaxial-Networking/dp/B00DC8IEE6/

u/lilotimz · 1 pointr/HomeNetworking

It's a waste of money spending $250 on a mesh setup with dedicated backhaul radios if you're not going to use it when a superior option of running MOCA backhaul exist.

You can get 3 AC Lite's or 4 EAP 225 for the same price as as the RBK40 setup.

Does all your houses coax cables converge into the basement? If so then all you need to do is get a simple wire only router like an Edgerouter X and connect an ethernet cable from the router to a MOCA adapter connected to the COAX splitter.

Then at the locations you want to have good wifi you'll need another moca adapter connected to the coax coming out of the wall and ethernet out into a wireless access point like the two mentioned above. In addition you can have say ethernet switches connected to the MOCA adapters. This way you can plug in devices like your PS4, desktops, etc in addition to a WAP at the same time. Doing this will reliably get you the 150 mbps you're paying for at each location.

u/Master_Armory · 1 pointr/cordcutters

If you are on Fios then I would skip the modem and just pick up some moca adapters.

This is what I use.
Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02), Black https://www.amazon.com/dp/B013J7O3X0/ref=cm_sw_r_cp_api_i_h2JZCb4EF50NY

u/Turtlecupcakes · 1 pointr/PleX

As others mentioned, 4K content is usually about 60-70mbps, so that's the minimum bar you'll need to avoid network issues slowing down your content.

>ethernet (plugged into power outlet)

If you're talking about powerline adapters, I'm not surprised that you're getting poor performance. Although they're advertised as 1300mbps+, in most cases you'll be lucky to see 100mbps, and right around 60-70mbps is very typical - so your house might be right on the edge of 'good enough'. A lot of people experience worse performance than wifi, both in throughput and in latency.

Wifi:

In general, your real max throughput on wifi will be about 40-50% of the advertised 'link speed' (the number on the box). So a 450mbps Wireless AC connection will max out at around 200mbps in real-world throughput.

If you're going through a wall or more than 10 feet away, you should cut that number in half again (~100mbps on a 450mbps AC adapter).

So from there you can look at what your requirements and options are. A solid start would be to get a 2x2 AC wireless card (advertised at 867mbps, so realistically 200-400mbps of potential real-world throughput).

Another great option:

If you have COAX TV cable running through your house, check out MoCA adapters. They'll pricey, but will give you solid 1gbps connectivity with next-to-no added latency: https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0/.

For 4K content, I would strongly recommend using an ethernet cable, and if running one directly isn't an option then MoCA will be your next-best bet.

u/jamesstarks · 1 pointr/HomeNetworking

Just another option if you have coax run to these rooms: Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02) https://www.amazon.com/dp/B013J7O3X0/ref=cm_sw_r_cp_api_Oqkozb06WFCY2

u/MikeyLew32 · 1 pointr/HomeImprovement

I've never used them. My house was built with coax and cat5e running to every room.

They supposedly are able to do that fast, but they're not cheap.
https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0

u/deebeeoh · 1 pointr/HomeNetworking

You just need some MoCA adapters. Hopefully you have a cable port somewhere near the middle of the house. The MoCA adapter will let you send ethernet over your cable lines in your house and then effectively hardwire in your access point without the speed and reliability drawbacks of powerline networking.

These bad boys here: https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0

u/kwiltse123 · 1 pointr/Network

I'm a little late to your question but here's my two cents:

  1. Nothing will be as good as running a cable. CAT5E or CAT6 won't really matter much for most users. CAT6 will get you past the 1Gbps speed at certain distances, but CAT5e supports 1Gbps at 100 m (about 300 ft). CAT6 is also more expansive and more difficult to work with (the strands are thicker which means they won't bend as well and they are harder to crimp connectors). The cable and connectors to do this will cost less than the Moca or powerline adaptors, but obviously you have to install the cable and that can sometimes be prohibitive. You could hire an electrician and he could possibly do it for less than $100, so don't rule that out either. Modular jacks can be terminated in a wall jack without the need to crimp, like Leviton (https://www.amazon.com/Leviton-5G108-RW5-QuickPort-Cat-5e-White/dp/B00029IYUM/ref=sr_1_4?s=electronics&ie=UTF8&qid=1539285173&sr=1-4&keywords=leviton+wall+jack). All you need is one cable and you can connect multiple devices in your office and even put in a wireless access point so your phone has a good connection.

  2. Barring the cabling option, I think powerline is the next best option. A pair like this (https://www.amazon.com/gp/product/B07B5BTKS3/ref=oh_aui_detailpage_o02_s00?ie=UTF8&th=1) will only cost you $70 and will give you speeds of a few hundred Mbps in most cases. It's cheap, easy, and reliable. I have personally experienced that these work pretty well, although not as good as real CAT5 cable.

  3. If for some reason you must go with Moca, a pair like this (https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200S02/dp/B013J7O3X0/ref=sr_1_1?s=electronics&ie=UTF8&qid=1539284526&sr=1-1&keywords=moca%2Badapter&th=1) will cost you around $170. I have personally experienced that these are mediocre performance wise, but it depends on the coax wiring in your house. If you only have a 2 or 3 way splitter, and it's RG6, and not that long, they might perform OK. But if you have a 5-way splitter or a long distance over RG59, these will not perform well. In addition, you should install a MOCA filter (https://www.amazon.com/TiVo-Authorized-Point-Entry-Filter/dp/B01EKCL1U6/ref=sr_1_2?s=electronics&ie=UTF8&qid=1539284803&sr=1-2&keywords=moca+filter&dpID=31qi88Oe0PL&preST=_SY300_QL70_&dpSrc=srch) on your main cable line to prevent your network traffic from getting to the outside pole, where somebody could conceivably sniff it. All of these Moca adaptors will reduce your cable signal a bit and could lead to some boxes not getting their required signal, resulting in channel dropout or digital noise in the picture. I can't think of a scenario where Moca would work better than powerline adaptors.
u/glugglug · 1 pointr/htpc

MPEG-2 HDTV over WiFi is a no-go. Things like Netflix can get away with it for 2 reasons:

  1. 3Mbps H.264 vs. ~15Mbps needed for the same quality MPEG-2 from cable, with no option for a lower bitrate stream.

  2. Internet streaming services buffer ahead of what you are watching, usually by 30s or more, so if your WiFi goes away for a second or two (which happens all the time...), it can be playing out of the already downloaded buffer during that time. WMC buffering time defaults to 100 ms. You can raise this in the registry but not by much. The reason they keep the buffer so tiny is because a bigger buffer would make it take longer to switch channels watching live TV.

    You have a few realistic options:

  1. MoCA. (Ethernet over coax) Unlike Powerline, these things are actually good, and actually deliver the rated total bandwith they are advertised with! (but exactly half that between any two nodes) The FiOS router is in fact a dual band MoCA adapter, and their default installation uses one MoCA channel for the WAN connection from the router to the ONT and another for the LAN to talk to set top boxes. It adds 4ms latency, but that is still way better than WiFi. In the past year or so, MoCA 2.0 adapters have become available to give it 600Mbps bandwidth, but do not get the offbrands of these -- they are still buggy and need to be rebooted every day or two. Off-brand is OK for MoCA 1.0 as that is far more mature. ActionTec MoCA 2.0 adapters are here: https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0/ref=sr_1_3?s=electronics&ie=UTF8&qid=1486960250&sr=1-3&keywords=moca+adapter

  2. Configure Windows to act like a router, with the HDHR behind that router with Internet Connection Sharing: http://www.home-network-help.com/windows-7-internet-connection-sharing.html

    Note: the MoCA signal is much stronger than the cable TV signal, and even though it operates in a higher frequency range, the periodic scans for other MoCA devices will interfere with cable channels near harmonics of the MoCA frequency. If your neighbors are using it, that may actually account for the kind of signal loss you are seeing. You will need to put a MoCA filter in front of the cable tuner to block the interference. MoCA filters: https://www.amazon.com/2-Pack-Extreme-POE-F201C-Point-Filter/dp/B01FT8C5DW/ref=sr_1_4?s=electronics&ie=UTF8&qid=1486960793&sr=1-4&keywords=moca+filter -- Note: there are other filters listed on Amazon. I picked these out because it lists a larger stopband frequency which includes the MoCA 2.0 range, not just the primary 2 channels for MoCA 1.0. Oddly none of the ones currently on Amazon blocks the 1GHz used by FiOS WAN, but maybe this is OK because the WAN band wouldn't have the higher amplitude pings searching for new devices on the network. Most cable company STBs have these filters built in, while the InfiniTV and HDHR do not. The cable company is supposed to put a filter like this where the cable enters your house to isolate your signal from the neighbors for stuff like this, but might likely not.

u/curdean · 1 pointr/cordcutters

Run a moca bridge over coax out the window and down into their window. You can get the 2 adapters from amazon. https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0

Might not be pretty, but would work

u/AustinSpartan · 1 pointr/Austin

I'd recommend using MOCA. Depending on the number drops you'd like to add, this may be more cost effective. You'll find the speeds to be comparable to wired cat6 (given today's tech) and it uses your existing in-wall RG6 cabling. https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0

u/SwordOfVarjo · 1 pointr/TrueDoTA2

Ok, that's great news. I'd go MOCA (v2). You'll need two MOCA boxes, one goes by the router and one goes by your PC. Each box connects to the coaxial (cable TV) cable and an Ethernet cable (box a Ethernet to the router and box b Ethernet to your PC). You may need two coaxial splitters too (cheap), make sure you get ones that go do at least 2ghz. This setup will cost you a bit over $100 but be far far faster and more reliable than power line.


Here's an example of what I'd buy:

Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02) https://www.amazon.com/dp/B013J7O3X0/ref=cm_sw_r_cp_apa_DH9JBbWBPRBEF

Plus some splitters:

Cable Matters 2-Pack Gold Plated 2.4 Ghz 2 Way Coaxial Cable Splitter (Coaxial Splitter/TV Splitter/Coax Splitter/RG6 Splitter) https://www.amazon.com/dp/B00KO8W93E/ref=cm_sw_r_cp_apa_uI9JBbB8H8531

And you may or may not need some extra short run coaxial cable:

Cable Matters 3-Pack CL2 In-Wall Rated (CM) Quad Shielded Coaxial Cable (RG6 Cable / Coax Cable) in Black 3 Feet - Available 1.5FT - 100FT in Length https://www.amazon.com/dp/B00LETAIAI/ref=cm_sw_r_cp_apa_gJ9JBbKVFRNW8


Since you have fiber I'm assuming you don't need to worry about a Poe filter.


Edit: what type of fiber do you have? If it's FiOS you actually may only need 1 moca adapter as the FiOS router actually contains a moca adapter and uses this to provide cable boxes with internet.

u/jared__ · 1 pointr/HomeNetworking

Like others have said, stationary devices (PC/Xbox/etc) should be hardwired if possible to free up the wireless for mobile devices (smartphones/tablets/IoT). You have other options besides running cat5/6 cables from your router all the way to the devices - you can use your existing powerline or coax to connect far away stationary devices.

u/eZGjBw1Z · 1 pointr/HomeNetworking

Something like this. This is just an example, I haven't done any research on the best kit to use.

u/mastamoon · 1 pointr/Fios

I believe you need something more like this.. https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0

The thing you listed would let you extend your network using coax, instead of running network cable.

Edit.. pasted the wrong link first.. fixed now.

u/303onrepeat · 1 pointr/Ubiquiti

Do you have coax connection on that side of the house by where the Orbi is now?

If so use a Moca adapter such as this
https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0

Then have the ethernet go into a Unifi 8 port switch then have a FlexHD sitting where the Orbi is now.

Also when it comes to FIOS I would go from the ONT right into your USG router. Don't use the FIOS supplied router. If you have FIOS TV leave it plugged in but only with a coax connection then branch off the ONT to the USG.

u/Grogery · 1 pointr/techsupport

i am looking at these ones link

so can i connect my asus router to the moca adapter via ethernet cable (it does not have coax port)? and then the coax out on the moca adapter into the wall? and then another moca adapter in my bedroom? sorry for all the questions!

u/cannonimal · 1 pointr/PleX

Mind sharing the adapter? I used the ActionTec ones and have no issues - but I had to add my own switch in between


Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02), Black https://www.amazon.com/dp/B013J7O3X0/ref=cm_sw_r_cp_api_i_X.wJDbZWEMZG7

u/hyperactivedog · 1 pointr/HomeNetworking

In the US I just ordered it off Amazon. These seem to be the best two choices, though MoCA won't work if the cable in question is also being used for satellite TV (if you have an empty stretch you could just unplug that section). A much cheaper alternative is DECA. It's 1/10th the speed though (and doesn't work if you have cable TV).
https://www.amazon.com/PACK-Broadband-Ethernet-Generation-Supplies/dp/B01AYMGPIO/ref=sr_1_1?s=electronics&ie=UTF8&qid=1523657631&sr=1-1&keywords=DECA+adapter

https://www.amazon.com/Motorola-Adapter-Ethernet-Bonded-MM1000/dp/B077Y3SQXR/ (be aware you need TWO)

https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0/

Be warned all things mentioned above are from a US perspective. All I know about Europe is that you guys have to pay 1.5-2x as much for electronics.

u/eric987235 · 1 pointr/HomeNetworking

hmmm, I just found these things that claim to do 1GBPS.

I'll call that my second choice. First is definitely getting more ethernet cable but that might be tough.

We didn't custom build the house. We found the place when it was already mostly finished and met the builder after the place was wired. He said he only ran the one cable for a router because "everything is wireless these days" and I didn't really question it since I never had an issue with a single AP at my old house.

u/Sheylan · 1 pointr/HomeNetworking

Something like this is what you would need:

Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02), Black https://www.amazon.com/dp/B013J7O3X0/ref=cm_sw_r_cp_apa_i_mEniDb9TNDB3P


Might want to shop around and see if you can find a cheaper one.

u/srdjanrosic · 1 pointr/HomeNetworking

Another thing you could try, if you have a coax connection to your room for the TV, could be a pair of these or these ActionTec MoCA 2.0 Adapters

People actually use these to extend/improve their wireless.

u/manarius5 · 1 pointr/HomeNetworking

https://smile.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0/ref=sr_1_2?ie=UTF8&qid=1511803090&sr=8-2&keywords=bonded+moca+adapters

MoCA adapters use coax as the medium for the data (as coax is actually designed to transmit data). They utilize the existing coax infrastructure in your house. Think of them like your powerline adapters. You put one at the end where the computer is and one where the router is and presto reliable fast connectivity over coax.

u/astutesnoot · 1 pointr/smarthome

You said it yourself. MoCA is the answer. I have a MoCA network that creates a mesh network between multiple rooms at gigabit speed. You just need to put MoCA adapters in each room. The adapter itself only has a one Ethernet port so if you have more than one device you need to plug in, you'll need to put a switch in as well to give you the necessary ports.

Here's a kit with two of those adapters.
https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0

u/Lobanium · 1 pointr/pcmasterrace

These are the newer versions of what I have.

Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02), Black https://www.amazon.com/dp/B013J7O3X0/ref=cm_sw_r_cp_apa_i_O2BvDbER3017T

I have 3 in my house on different floors. They work perfectly. I game and stream video without issue. No loss of bandwidth and no increased latency in any testing I've done. If they do affect the signal, I can't tell. Been using them for years.

There's no set up involved. Just connect them. They are invisible to the rest of the network.

They're not cheap, especially compared to shitty powerline adapters, but they're worth it. I have no idea why they're not more popular.

u/garester · 1 pointr/HomeNetworking

Does the Frontier modem have built-in MoCA capabilities by any chance? I had a similar situation in a three story townhome. Each room had coax, and instead of running Ethernet to each of the floors, I utilized a MoCA adapter to provide internet connectivity to the rooms over coax, since each room was already wired for coax. The cable modem provided by Comcast had built-in MoCA capabilities, so all I had to do was ensure all of the coax outlets were on the same splitter, and add a MoCA Ethernet adapter on the other floor to extend network connectivity to my office. Below is my current setup.

[Outside Incoming Coax]
|
[Coax splitter in the Attic]
| -> (Cable modem on 2nd floor) <-> den switch
| -> (MoCA adapter on 1st floor <-> office switch

However, if the Frontier cable modem doesn’t have built-in MoCA capabilities, then you’ll need a second MoCA adapter to terminate the MoCA connection at both ends:

[Outside Coax]
|
[Splitter]
| -> (Coax Outlet #1) -> MoCA Adapter -> Frontier Cable Modem -> switch/router
| -> (Coax Outlet #2) -> MoCA Adapter -> Ethernet Switch

I recommend this kit: “Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02)” https://www.amazon.com/dp/B013J7O3X0/

You’ll also want to install a MoCA filter on the outside incoming coax line so the MoCA network demarc terminates there and doesn’t extend outside of the home: https://www.amazon.com/dp/B00DC8IEE6/

Hope it works out! Let me know if that doesn’t make sense, and feel free to PM with questions.

u/laird_dave · 1 pointr/HomeNetworking

If you have the opportunity to go wired, use it. WiFi extenders usually decrease performance for everybody because air is a shared medium.

Imagine a guy screaming in your direction. If you shut up and listen, you can repeat what he said in the direction of another guy. The other guy will have to wait for you to stop yelling, then answer, you'll have to wait and yell at the first guy.

Sounds pretty inefficient? That's a WiFi extender for you.

Use MoCa to get signal to your bedroom. Put a switch there if you want to use more than one device. Put an AP there if you want wireless.

MoCa adapter $169.00

Dumb switch $15.99

Access point $75.88

So, you'll have to shell out $260.87 for a setup that'll be orders of magnitude better than your WiFi extender stuff.

u/GreenChileEnchiladas · 1 pointr/techsupport

There are adapters, like this, but they're not cheap.

You can also check into powerline adapters which are cheaper, but you need to have them on the same circuit as each other.

I was just recommending moving the modem to the spot near one of the offending tv's and connecting it with a cable and connect one of the Google WiFi devices. See if the issue continues to happen with a small test case like that.

u/PortalRex · 1 pointr/buildapcsales

https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200S02/dp/B013J7O3X0/ref=pd_lpo_sbs_147_t_0?_encoding=UTF8&refRID=Z2R5R0Q6MY847FA1W59N&th=1

​

Keep in mind this is really only for high speed internet I have gigabit internet with no connection drop off. You should look into what the max for powerline adapters are I know it was too low for me.

u/JrClocker · 1 pointr/HomeNetworking

First off - if you are going to run cable, don't run Cat 5...do Cat 5e at least...preferably Cat 6 or Cat 6a (you don't want to have to pull it out and run it again in the future).

​

For my personal situation, it was near impossible to run the cabling without ripping up ceilings and walls. I ended up using strictly MoCA 2.0 adapters (the 2.0 are faster than MoCA 1.0 adapters)...specifically Actiontec bonded adapters (Amazon Link).

​

I had to change out the splitters (get MoCA bandwidth ones...Amazon Link), and you want to add a MoCA point of entry filter where the cable comes into the house (Amazon Link). The RF cable in my house was high quality, low loss cable. If your house was built mid-1990s or later, it's most likely low loss cable. You can look at the information printed on the cable, and Google it to find its properties.

​

After I changed out the splitters, I get 1 Gbps transfer between all MoCA 2.0 endpoints (I currently have 6 in the house). The MoCA devices themselves do all the magic, and allow you to have up to 16 devices running on the same RF coax lines.

​

If you have satellite TV, you most likely cannot use MoCA as the MoCA devices use the common frequencies that satellite TV use over RF coax lines. However, cable TV uses the spectrum below 1 GHz, so you can run MoCA and cable TV at the same time. Just be cautious if you have the "whole house DVR" thingy, as the DVR devices communicate with each other on MoCA (usually MoCA 1.0...and your MoCA 2.0 devices will drop to 1.0 speeds if on the same RF coax line as 1.0 devices).

u/carolinaelite12 · 1 pointr/RocketLeague

If you have a coaxial cable outlet in your room, and you're willing to spend a good bit of money, then these MOCA adapters are the only way to go. They use your coax cable through your house and are much more reliable than power line adapters. I installed them in my room, and my internet has been top notch. Like I said tho, they are expensive.

u/scorp508 · 1 pointr/homeautomation

I kept the standard FiOS router as the ingress/egress to the home simply so I didn't have to deal with fiddling around to retain the service feature integration with the STBs and mobile app. For example all of the mobile app functions work when on the local Wi-Fi or remotely, the STB self-help tools work, and Verizon support working remotely to the STBs still works without having to explain to some support person I'm not setup the way they expect.

I'm sure I could have figured it out, but the time to do so wasn't important to me and I'd rather avoid the headache of a frustrated support rep.

I currently have two AP AC Lite and one AP AC Pro spread around the home. The two AP AC Lite units were part of my original purchase and I added the AP AC Pro later on to boost signal in a couple areas the Lite units were covering a bit weakly due to a lot of walls the signal was going through. I also have the Cloud Key for management purposes which I strongly suggest getting. It makes management, evenly remotely, of the UniFi gear a very simple task.

I do have a USG sitting new in a box for about a year I haven't gotten around to installing. My plan is to hang that off one of the FiOS router RJ-45 ports and run everything non-STB IP related through it, while the STBs using MoCA go around it.

My current setup works great, but it isn't what I want in the end and probably not what you'll see most people with. We moved into this home ~1.5 years ago and it has no network drops. As an immediate solution I started using some MoCA 2 to Ethernet adapters to get IP into areas without network cabling run to them. My intent was to go back and run CAT-6 later, but these have been working so well I keep kicking that can down the road. The adapters I'm using: https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0/

Here is what I currently have, you'll want to view this in a full browser and not a mobile app to see the layout well.


ONT--> RJ-45 Port--> FiOS Router--> RJ-45 Ports --> Some network connected stuff.
|
|-<#>-->Coax --> <> --> MoCA to Ethernet Adapter --> Small Gig switch --> UniFi AC AP Lite and other stuff
| |
| |--> Set top box
|
|_<
>--> MoCA to Ethernet Adapter --> Small Gig Switch -> UniFi AC AP Lite and other stuff
| |
| |--> Set top box
|
|<*>--> MoCA to Ethernet Adapter --> Small Gig Switch -> UniFi AC AP Pro, Cloud Key, and other stuff
|
|--> Set top box

<#> = A three-way equally balanced MoCA 2 compatible coax splitter.

*<>** = A two-way equally balanced MoCA 2 compatible coax splitter. Although the MoCA adapters have a pass-through port for connecting STBs, the FiOS STBs didn't work with it so I added the splitters. The FiOS ONT puts out such a hot signal on coax that the splits don't seem to interfere with the signal quality.



Here is what I plan to do once I get off my butt and run some CAT-6 so I can remove the MoCA adapters and coax splitters.

ONT--> RJ-45 Port --> FiOS Router--> RJ-45 Port --> USG --> Large POE Gig Switch --> Small POE Gig Switch --> UniFi AP and other stuff
| |
| |
> Small POE Gig Switch -> UniFi AP and other stuff
| |
| |> Small POE Gig Switch -> UniFi AP and other stuff
|
|-<#>-->Coax --> Set Top Box
|
|
> Set Top Box
|
|_> Set Top Box

u/rtechie1 · 1 pointr/HomeNetworking

This is the exact product you need. MoCA adapters are deployed in pairs. You also apparently have to do a firmware update.

> Also just making sure, I will not get into any trouble with VM with this will I?

Virgin Media is a fiber and cable ISP. You will have no problems if you are getting VM's fiber service, but it sounds like you're getting VM's DOCSIS 3.0 cable modem service.

There is an issue with interference between MoCA and DOCSIS at download speeds above 100 mbps you might run into. Get the fiber service if you can.

u/coolmintchocolate · 1 pointr/HomeNetworking

I'm using Actiontec ECB6200K02 adapters and I can't speak to the quality of my coax lines. I understand that MoCA is not a good as Ethernet (my house isn't wired for Ethernet) and that speeds might suffer a bit as a result. I'm mainly asking if there are incompatibility issues with MoCA and Ubiquiti hardware.

u/x5X1J · 0 pointsr/HomeImprovement

I’ve wanted to try these, they can run up to 1 Gbps over your existing coax wiring:

Actiontec Bonded MoCA 2.0 Ethernet to Coax Adapter, 2 Pack (ECB6200K02) https://www.amazon.com/dp/B013J7O3X0/ref=cm_sw_r_cp_api_IRpaAb9JEC28H

u/mrsolo · -1 pointsr/HomeNetworking

Powerline is not awful. But the performance varies a lot from site to site.

The other option is to do moca

https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200K02/dp/B013J7O3X0/ref=sr_1_3?ie=UTF8&qid=1495244484&sr=8-3&keywords=moca+adapter

if you prefer wired over wireless.