Reddit Reddit reviews Adaptec 2248700-R U320 PCI Express X1 1-Channel SCSI Host Bus Adapter

We found 5 Reddit comments about Adaptec 2248700-R U320 PCI Express X1 1-Channel SCSI Host Bus Adapter. Here are the top ones, ranked by their Reddit score.

Computer Internal SCSI Port Cards
Electronics
Computers & Accessories
Computer Components
Network I/O Port Cards
Computer Internal Components
Adaptec 2248700-R U320 PCI Express X1 1-Channel SCSI Host Bus Adapter
Device Type: Storage controller - plug-in card - low profileInterface Type: PCI Express x1Dimensions (WxDxH): 6.6 in x 2.6 inData Transfer Rate: 320 MBpsController Interface Type: Ultra320 SCSI
Check price on Amazon

5 Reddit comments about Adaptec 2248700-R U320 PCI Express X1 1-Channel SCSI Host Bus Adapter:

u/AttackTribble · 9 pointsr/talesfromtechsupport

You can get PCIe SCSI cards, and SCSI is designed to be backwards compatible. You would need to find an adapter though.

http://www.amazon.com/Adaptec-2248700-R-Express-1-Channel-Adapter/dp/B000NX3PII

u/DerBootsMann · 2 pointsr/sysadmin

Nice! Here's one for free! I mean I don't see how I could charge you for pointing out at something!

https://www.amazon.com/Adaptec-2248700-R-Express-1-Channel-Adapter/dp/B000NX3PII

u/charonpdx · 1 pointr/VintageApple

You'd need a SCSI card in the PC.

If you have an older PC with a conventional PCI slot (pre-PCI Express,) SCSI cards are cheap and readily available on eBay.

If your only PC is a newer one, you'd need either a PCI Express SCSI card (not cheap) or an old USB SCSI adapter (really not cheap) then adapter cables to convert the "external SCSI" to an internal SCSI, or the high-density internal connector to the bigger/lower-density connector on the drive.

u/bagofwisdom · 1 pointr/pcmasterrace

That's an 80 pin SCSI drive. Making this work in your PC isn't worth the expense. There is no adapter to go from SATA controller to SCSI drive. You'd need a SCSI controller, which was obsolete when PCIe came out. However, you're in luck as controllers are still made. If this is a 10k or 15k RPM drive it's going to be super loud and super hot. I also never trust used hard drives to last long at all. You'll need a SMART report on the drive and hope it logs its power up/down counts and run times.