Reddit Reddit reviews AmazonBasics 3.5 mm Male to Male Stereo Audio Aux Cable, 4 Feet, 1.2 Meters

We found 46 Reddit comments about AmazonBasics 3.5 mm Male to Male Stereo Audio Aux Cable, 4 Feet, 1.2 Meters. Here are the top ones, ranked by their Reddit score.

Audio & Video Accessories
Audio & Video Cables & Interconnects
Accessories & Supplies
Electronics
Audio Cables
Stereo 1/4-inch & 1/8-inch Jack Cables
AmazonBasics 3.5 mm Male to Male Stereo Audio Aux Cable, 4 Feet, 1.2 Meters
3.5mm male-to-male stereo audio cable transmits audio in stereo formatConnects smartphone, MP3 player, or tablet to car stereo or portable speakersWorks with any device equipped with standard 3.5mm audio jack or AUX-in portBeveled step-down design; gold-plated plugs for reliable, static-free performanceMeasures 4 feet long; AmazonBasics 1-year limited warranty
Check price on Amazon

46 Reddit comments about AmazonBasics 3.5 mm Male to Male Stereo Audio Aux Cable, 4 Feet, 1.2 Meters:

u/HerbertTarlek · 4 pointsr/Brewers

If you want to listen to the radio while watching the game on the TV, all you need is a radio, patch cable, and Radiodelay on a PC. I've found that the radio broadcasts need to be delayed around 16 seconds to match up with FSWI on DirecTV.

u/Lorben · 4 pointsr/NintendoSwitch

>Is there a better way?

Kinda. There's another way at least. Xbox party chart is available on Windows 10, and you can use a Windows computer as a mixer. Then you can use a headset attached to the computer to both hear Switch audio while running voice chat through the computer.

To do this you'll need an aux cable.

What you would need to do is find the Line-In jack on the back of your computer. Plug one end of the aux cable into the headphone jack on the Switch and the other into the Line-In on your computer

On your computer go to Sound Settings in the Control Panel. You can also use the search bar on your computer and search for "Sound".

In the main Sound settings there's a section for Input where you can choose your Input Device. Choose Line-In there.

Then click on Device Properties right below Input Device

Then click Additional Device Properties on the right

Now we're in Line-In properties, go to the Listen tab and check 'listen to this device'. Click on the drop down labeled "Playback through this device" and set it to your headset.

You may also want to go to the Levels tab and turn up the volume coming from line in.

Press "OK" to close Line-In properties. You should now be hearing both your computer and the Switch audio through the same headset.

So now you can use Discord\Xbox Party\Steam voice chat on the computer and have the audio mixed with the Switch sound.

u/lightfork · 4 pointsr/buildapc

Using a free audio program such as Audacity, dub it with this male-to-male cable by going from the device's headphone jack to your computer's line in.

u/funtech · 3 pointsr/piano

Yes, so the easiest thing you could do to hear both at the same time is connect the headphone jack on the piano to the audio input on your MacBook (depending on year, this might be a separate plug, or it might be the same as the headphone plug). You'd use something like this: https://amzn.com/B00NO73MUQ

The Mac should automatically send the input from the piano to the speakers on your Mac (if it doesn't you may have the output muted, you can change this in the sound system preference on the "input" tab. Make sure the device isn't set to microphone, but to line in, and the output isn't muted at the bottom.)

Now the cool thing is you can play garage band and you should hear both the piano and garage band coming out of the speakers on your Mac. Since you probably don't want to listen to it all through your tiny Mac speakers, you could then plug some nice amplified external speakers in to the headphone jack of your Mac. This should do what you want!

u/Jeritens · 3 pointsr/piano

A simple way, a solution I am using is connecting the piano headphone audio output to your computer audio input with a male to male audio aux cable https://www.amazon.com/AmazonBasics-3-5mm-Stereo-Audio-Cable/dp/B00NO73MUQ and then set up audio playback in your sound settings https://imgur.com/a/T0Qxbfo.

Now you are able to listen to the piano and computer sound with your default pc audio output. If you set the audio input you used for your piano in discord, your friends can listen to the piano and you can hear their reactions. But because the piano is a different audio input you can't talk to them and you have to switch your audio input back to your mic to talk to them again.

If you get a lot of static noise while the piano is connected it very likely that a ground loop noise isolator will help. (I use a ground loop isolator and I have a roland fp 10. I still get static noise only when the piano is turned off because the power cable is still plugged in. I usually mute the sound in the volume mixer on my pc)

I used this setup to play the audio from my nintendo switch through the pc and listen to both my pc sound(mainly discord while playing smash) and switch sound on my headphones.

To go even further you can install a virtual audio cable https://www.vb-audio.com/Cable/ and route your mic and piano audio through the same audio line and playback this audio source to listen to the piano through your default audio output. A big drawback I noticed is that the music is very delayed this way and you hear your voice delayed which is messing with your brain a lot.

I hope that helped. I'm sure there are other solutions with audio interfaces, audio mixers or with midi. This is just a cheap solution which works for me.

u/ByGollie · 3 pointsr/ITdept

....and going old school - an aux cable from the headphone jack into the microphone jack on your PC, then use Audacity to save it as a WAV file

https://www.cnet.com/uk/how-to/transfer-memorable-voice-mails-to-your-computer-with-a-simple-audio-trick/

(WAV files are uncompressed with no quality lost)

Like the other posters in this thread have said- the legality of recording this, or if the recording is legally acceptable in a court case is something for the company lawyer to decide on.

u/X019 · 3 pointsr/GoForGold

Looks like that takes aux(3.5mm) , SD card and 1/4 inch, so you've got options.

Here's a CD player

u/Beefington · 2 pointsr/NoStupidQuestions

You want a male-male 3.5mm stereo cable, commonly called an Aux cable. Amazon link

u/neo_styles · 2 pointsr/HeadphoneAdvice

This is exactly what I use:

AmazonBasics 3.5mm Male to Male Stereo Audio Aux Cable - 4 Feet (1.2 Meters) https://www.amazon.com/dp/B00NO73MUQ/ref=cm_sw_r_cp_api_i_gBg7Ab1GYVBTV

Insulation is just slick enough to not snag on everything, it's super-lightweight, and everything actually feels like it was thoughtfully put together. For an alternative, you could go with Anker (whom I use for all my Lightning and USB cables), but that would really be down to available stock and personal preference.

u/Enviedd · 2 pointsr/HeadphoneAdvice

Thanks for the info. Sounds like I need to decide on the type of mic I want.

​

I'm assuming I could theoretically purchase an extender if I went with a desktop mic? Would this work: https://www.amazon.com/dp/B00NO73MUQ?ref_=ams_ad_dp_ttl

​

I'm trying to make sure I have everything covered.

Thanks for the help man!

u/brewingcode · 2 pointsr/roadtrip

My tips:

Things to bring

  • Bring a USB Cigarette car charger - Link
  • Cell phone dash holder - Link
  • Headphone cable - Link
    (Listen to your jams while driving)
  • Some snacks (stop at Trader Joe's or similar store)
  • Bottle water
  • Map of the region (Yes we have internet.. but not everywhere)
  • Plastic bags as you acquire them (at the grocery store, gas station, etc.. work great for garbage)


    Tips for Rental Cars

  • Don't get the insurance
  • Don't get the insurance
  • Get there 20-30 minutes early and be nice to the guy/gal. It's going to be a busy time for them and they will have a lot of angry people. Usually if you're nice they will upgrade you to a large vehicle because they have too many reservations and not enough stock on lot.
  • Don't rent from the airport, always go to a lot off site.
  • Be sure to do the walk around, it's as much for you as them.
  • Do not pre-pay gas. Just fill it up to where it was before dropping it off. I always keep an eye out for the closest gas station before I leave.
  • Double check you got all your stuff. Even if you have to make a list. I've found all sorts of stuff in cars that even the detailers missed.


    I travel/road trip quite a bit; If you've got any other questions, please let me know.
u/[deleted] · 2 pointsr/vita

Haven't played the game myself so I don't know if this would suffice, but you could just hook up an audio cable to your computer and record via analog. It's not 100% accurate (compared to digital), but you probably won't be able to tell the difference unless you're an audio engineer by trade.

If your PC has a microphone jack, you can use a double male 3.5mm audio cable, also available from your local electronics store. Audacity is a free and fairly powerful audio editing program you can use to record and clean up the samples, if needed.

If you don't have a mic plug, you can buy a cheap USB adapter like this:
https://www.amazon.com/Audio-Technica-ATR2USB-3-5mm-Adapter/dp/B00I6ILPPC
https://www.amazon.com/Plugable-Headphone-Microphone-Aluminum-Compatibility/dp/B00NMXY2MO

I don't know if microphone jacks are necessarily made for this though, so as a precaution you'll want to keep your PC's microphone auto gain controls and stuff all disabled, and keep your Vita audio very low at first, record, then work up from there. I doubt there'd be any overload problems, but at the very least you want to keep the audio volume from clipping, and you can always adjust volume and such in Audacity.

Unless there's some export function, the only other way to get the music out perfectly would be to download the ROM and hack into it, but that's probably more trouble than it's worth.

As far as copyright goes, as long as you own the game, nobody's going to really care if you do this for personal use.

u/KnoLord · 2 pointsr/techsupport

You'll need 2 female to 2x female 3,5mm y-splitter cables, like these.
Also you'll need 4 male to male 3,5mm cables, like these.

u/sveitthrone · 2 pointsr/TapeKvlt

At the time that wasn't the intention. You could probably just get any cassette player and a headphone jack extension to do that for you.

Seriously, avoid any and all analog equipment that is marketed towards "ripping" or "converting" analog audio to digital. That stuff is marketed to aging Baby Boomers who don't know any better and intend to have their analog music played "one last time" before it's digital forever. It's a scam, and those things never work.

u/Jomaan · 2 pointsr/airsoft

$40: Howard Leights

$12: Retevis PTT Mic

$5: Amazon 3.5mm Aux

$57 total to flesh out your radio setup.

u/WadeMoreau · 2 pointsr/BudgetAudiophile

amp

cable

speaker wire

you can find the cable and speaker wire cheaper... your local dollar store probably sells both. you do not need banana plugs, they just make speakers easier to connect and disconnect.

u/Swarthy_Immigrant · 2 pointsr/deaf

I beta-tested the /u/Biblos_Geek headphone and pretty much I found the same positive results listed by the other reviewers I just read here.

I will mention what I purchased to pair up the 2E1+Vibe to make it work. The headphone to me was free but I purchased these parts to make it work (costs may have changed on Amazon since my purchase).

Class D amp at $22

3.5mm audio splitter $5

3.5mm male to male cable $5

So my costs out of pocket were under $35 (give or take). Set up was fairly simple - no more difficult than wiring up a TV with external speakers. I am profoundly deaf in one ear and somewhat normal hearing in my other working ear. I would be willing to beta_test for this again if asked. So a positive experience over all.

u/SpikeBolt · 2 pointsr/NintendoSwitch

I have had the same problem as you, though I don't think we have the same setup. I connect via HDMI to my monitor, then by AUX cable to my computer's Line-in and then to my speakers/headphones via computer.

I tried a ground loop isolator, which mitigated the problem. It's not that expensive so you can try it for cheap. Here's the one I got.

What solved the issue was just a better aux cable. I bought an Amazon Basics cable and the static noise was gone. Here's the one I got.

u/EightOhms · 2 pointsr/audio

I know why this happens, but it's a bit boring. (I can explain it if you want).

​

The work around is to take the Left/Right signal your are currently running into the the 2-channel input on your speakers, and split it, and feed it into the green and black inputs on the 6-channel input on your speakers.

​

You'll need the following adapters to make that work:

u/AbacabLurker · 1 pointr/HeadphoneAdvice

So... very good news! I took a chance and this cable fits and works perfectly:

AmazonBasics 3.5mm Male to Male... https://www.amazon.com/dp/B00NO73MUQ?ref=ppx_pop_mob_ap_share

I also picked up these just as a test and they too fit and work perfectly if you’d prefer to use a different cable:

Josi Minea x 2 Pcs 3.5mm Gold... https://www.amazon.com/dp/B01DCKU7YI?ref=ppx_pop_mob_ap_share

Very happy!

u/Ron_Stopable · 1 pointr/audiophile

Buffys_dad is correct, you will need a 3.5mm to 3.5mm cable like this one here. You will want to connect this to the unbalanced input on the speaker and then into you laptop.

u/checkerdamic · 1 pointr/vinyl

Okay... so I just need to repeat these are probably not the best options... #1 is probably the worst option and may or may not work... and I can't guarantee you will get the best sound quality out of either but here ya go:

(1) If you only have a 1/4 or 1/8 out, you can run a cable with two male connectors from the stereo to your computer's mic input. They would either be a 1/4 to 1/8 cable or a 1/8 to 1/8 cable.

(2) For RCA output, you can a RCA to 1/8 cable into the computer mic input or run a regular RCA cord with this RCA to 1/8 adapter.

None of this is ideal, but for under $10 it might be worth giving it a try and messing around with it if you have the time and patience. Hope this helps. If none of this works... sorry...

u/scottymoze · 1 pointr/hometheater

So that speaker system has 3 inputs: 1 RCA (red/white) and 2 headphone jack. With your three devices, assuming your TV has no audio out, you can connect each device via RCA cable, headphone cable, or an adapter for one to the other, to those three inputs on the speaker system, for your cheapest possible solution. So a mix of these cables should do, hopefully? Let us know what you think:

https://www.amazon.com/AmazonBasics-3-5mm-Stereo-Audio-Cable/dp/B00NO73MUQ/ref=zg_bs_597566_1?_encoding=UTF8&psc=1&refRID=77XCX74SBHRRD7D85Q1V

https://www.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S/ref=zg_bs_597566_6?_encoding=UTF8&psc=1&refRID=77XCX74SBHRRD7D85Q1V

https://www.amazon.com/MOCREO-Splitter-1-Mini-Stereo-Adapter/dp/B015J4OKZW/ref=zg_bs_597546_11?_encoding=UTF8&psc=1&refRID=2Q1JZS2CEWWGYGWWCR6R

https://www.amazon.com/Monoprice-1-5ft-Premium-22AWG-Cable/dp/B003L1717K/ref=zg_bs_597546_19?_encoding=UTF8&psc=1&refRID=2Q1JZS2CEWWGYGWWCR6R

EDIT: and here's some extensions also, in case you grab any of the above and they're too short:

https://www.amazon.com/AmazonBasics-3-5mm-Female-Stereo-Audio/dp/B01CNAUYBY/ref=sr_1_3?s=aht&ie=UTF8&qid=1481742465&sr=1-3&keywords=headphone+extension

https://www.amazon.com/CableWholesale-6-Feet-Cblwhl-Extension-10R1-02206/dp/B000I1GZ0U/ref=sr_1_1?s=aht&ie=UTF8&qid=1481742502&sr=1-1&keywords=rca+extension

EDIT 2: Can you send us the brand/model # of your TV so we can check out the inputs/outputs? Thanks!

u/SemperFlux · 1 pointr/xboxone

Easy enough; your Xbox has Optical Out for audio. You can bypass the monitor altogether. Just grab an Optical to 3.5mm adapter (like this one: https://www.amazon.com/OREI-Digital-Analog-Audio-Converter/dp/B008EPW7TA)

And plug an optical cable in from the Xbox to this adapter, and then a 3.5mm audio cable from the adapter to your speakers. Amazon makes an AmazonBasics one here for cheap: https://www.amazon.com/AmazonBasics-3-5mm-Stereo-Audio-Cable/dp/B00NO73MUQ/

You might need to play with the Audio Output settings menu on your Xbox, but I think this will work!

u/AnimeToken · 1 pointr/Rainbow6

the 3.5mm audio jack can cause interference with the I/O shield from the motherboard. Try getting a gold plated 3.5mm audio jack cord since it prevent issues like this from happening.

https://www.amazon.com/AmazonBasics-3-5mm-Stereo-Audio-Cable/dp/B00NO73MUQ/ref=sr_1_2_sspa?ie=UTF8&qid=1505320017&sr=8-2-spons&keywords=3.5mm+audio+cable&psc=1

I am guessing you are using the one that came with your speakers.

u/sharkamino · 1 pointr/vinyl

The very worthwhile new improved X version is the Audio-Technica AT-LP60XBT $149. However you can save $49 for the overpriced Bluetooth module by getting the Audio-Technica AT-LP60X $99 and a 3.5 mm Male to Male Stereo Audio Aux Cable, 4 Feet $5 to connect to the Aux input on your Bluetooth speaker.

Or a better turntable, Teac TN-300SE, $129 with coupon code SPIN and a 3.5mm to 2-Male RCA Adapter Audio Stereo Cable - 4 Fee $6 to connect to the Aux input on your Bluetooth speaker.

u/DJPlace · 1 pointr/VitaPiracy

i looked at this 3.5mm jack to jack adapter and this is what i have will this work?

​

https://www.amazon.com/AmazonBasics-Stereo-Audio-Cable-Meters/dp/B00NO73MUQ/ref=sr_1_5?keywords=regular+3.5+audio+jack&qid=1571130392&s=electronics&sr=1-5

​

also i'm using a PS vita 2000 with henkauk 3.60 the basic hacking stuiff.

also i get this once i plug my that cord in my PC

​

https://imgur.com/a/inNWPV6

​

what one should i pick.

u/the_blue_wizard · 1 pointr/audio

There is a AUX IN on the side of that speakers, so asusming your Phone has a Headphone out, then you need a -

3.5mm Stereo to 3.5mm Stereo cable.

Though in a rare case you Phone might have a 2.5mm Stereo Headphone connection.

You can find either of these cables on Amazon -

https://www.amazon.com/AmazonBasics-3-5mm-Stereo-Audio-Cable/dp/B00NO73MUQ

https://www.amazon.com/2-5mm-3-5mm-Quality-Stereo-Audio/dp/B0122W34AG


Which is appropriate for you depends on which Smart Phone you have.

u/mangomofongo · 1 pointr/buildapc

Can I plug my computer into my stereo speakers' amp with a simple 3.5mm aux cable?

When I've tried, I get an interrupted audio connection with some occasional blasts of loudness. Headphones work fine, so I think I need a different cable.

For reference:
My PC Case
My Amp
Example cable

u/ozyri · 1 pointr/homeautomation

Didn't in the end. Made it work. Solution:



Need two additional cables:

  1. Female to two females 3.5mm

  2. 2x A simple male to male 3.5mm

    Setup:

    1x Male to male into Echo (out)

    1x Male to male into PC (out)

    Both into female to female split

    Speaker 3.5mm to phono into last female to two females slot. (in)

    Now my PC shares speakers with Echo (even when PC is off, but bear in mind that my speakers have a separate plug)
u/Str8OutaAuckz · 1 pointr/PS4

If you want a really cheap way you could just get a 3.5mm to 3.5mm cable and plug one end into the controller and one end into the line in port on the sound card. Only problem with this is that you will have a cord going from the controller to the computer lol.

u/MatNomis · 1 pointr/NintendoSwitch

A KVM is possible, but the big advantage of a KVM is that it not only allows you to share a screen across two sources, but also an attached keyboard and mouse. Unless you intend to use a keyboard and a mouse with your Switch, I'd go for a far less expensive, 2-port HDMI switch. That's all you need if you're only concerned about video. Plus, I'd argue it has more future utility. It'll be smaller, because it has less ports and the ports it has are smaller. You could bring it with you when you travel and hook multiple things up to HDTV's at hotels or friends' places. Plus, most newer displays have HDMI ports. Buying a DVI KVM (or even a DVI-only video switcher) is going to be more expensive and clunkier.

Here's an example of stuff that would work. I am not endorsing these products at all, I'm just picking the first well-reviewed looking hit from my search results (on Amazon):

search terms: "2-port HDMI switch"

looks good: DotStone HDMI Switch Bi-Direction only $8.. You won't get anywhere near that with a KVM.

and then, with search terms "HDMI to dvi", you could probably use 1 or 2 of either these:

HDMI to DVI (cable)

or these HDMI to DVI (adapter)

If you have a ton of extra hdmi and/or dvi cables, you might prefer the adapter, otherwise you could use it on its own in cable-form. Keep in mind that in a typical setup, the Switch's audio is going through the HDMI cable as well, and whether you used a HDMI switch or a DVI KVM/switch, the connection to your monitor is going to have to terminate in DVI, and that DVI won't carry the audio. Does your monitor even have speakers? Even if it did, you most likely won't get any audio over DVI. I haven't tested this myself, but I just did a little research and found you can use the headphone jack on the Switch, while docked, to get it's audio, so depending on what's going to be playing your sound, you might need one or more things from this list:

stereo miniplug cable (male to male) - for going from Switch to portable speakers or anything with a line-in

miniplug couplers - handy if you need to plug the above into another male cable

miniplug to RCA adapter cable - for going from the Switch to a stereo system or similar

​

​

u/plazman30 · 1 pointr/headphones
u/Turbogoblin999 · 1 pointr/vitahacks

If you lower the capture quality on the capture software you should be good, even with a low end computer.

Just remember that the usb cable doesn't do audio, so you'll need to get one of these cables and plug it into the mic port on your computer.

u/NEKCOHM · 1 pointr/beermoney

AmazonBasics 3.5mm Male to Male Stereo Audio Aux Cable - 4 Feet (1.2 Meters) https://www.amazon.com/dp/B00NO73MUQ/ref=cm_sw_r_cp_apa_cBD0AbD3G7SP1

The Dollar Tree sells a similar aux cable to this for $1. Cut the ends off and put them in your phones.

u/RoadRunner-007 · 1 pointr/razer

On the back of your Xbox, there should be a a plug where you can plug in standard headphones (a 3.5 mm audio jack). Get an audio cable with two male 3.5 mm ends like this one: https://www.amazon.ca/AmazonBasics-3-5mm-Stereo-Audio-Cable/dp/B00NO73MUQ/ref=sr_1_3?ie=UTF8&qid=1522676285&sr=8-3&keywords=male+to+male+audio+cable

Plug that cable into the back of your Xbox and the other into the audio "line in" plug in the back of your computer. Usually you will see three audio plug on the back of your computer for a plug this size. One plug for a mic, one for headphones and one for "line in". Plug it into the line in.

Now right click on the speaker icon on your task tray and select the "Recording Devices" option in the popup. In the resulting window, make sure that the "Recording" tab is selected. Then double click on the "Line In" option in the list. This will open another window. Choose Listen tab, check Listen to this device. Choose playback through Default playback device and click Apply button. You may have to then play with the audio levels in Windows but it should now work.

Good luck.

u/OverExclamated · 1 pointr/HeadphoneAdvice

Any 3.5mm male trs to 3.5mm male trs cable will work. There's a ton of them available. Here's an example.

You can get them in a variety of lengths, a variety for materials like just straight rubber or cloth braided, and you can get them with either a straight plug or a 90° jack at one end. So keep in mind any of those particular features you might want.

If you want one with an inline volume control, it's still a t-r-s jack at both ends. If you want one that has an inline microphone, it'll have a t-r-r-s jack at one end like this one - that would be for use with something like a single-jack laptop or phone.

I know in the post you submitted in the other subreddit that someone mentioned you should look for something with a slim barrel. That's not really something you need to worry about with the MSR7. For example, the 3.5mm cable I use for all my headphones that have the 3.5mm jack at the cup is this one which, if you notice, has a pretty fat barrel at the jack. It's works just fine on my MSR7 's.

u/Nexious · 1 pointr/horror

> or is there something I can download on my laptop that can just record the audio from me playing it?

Yes, assuming your laptop has a functional microphone you can do the following:

  1. Download Audacity for free from http://www.audacityteam.org/download/windows/ and install it.

  2. Launch Audacity and click OK to hide the tip window.

  3. Select Edit > Preferences from the top menu and then under Devices > Recording make sure that the drop-down next to "Device:" is set to your laptop's microphone. Then press OK.

  4. Click the red Record button at the top. You should then see blue waves when you make noise, indicating the microphone is working correctly.

  5. With Audacity recording from the microphone, play the tape from the cassette with the volume loud enough that the waveform nicely fills the bar like this. Make sure the sound isn't flat-lining or clipping at the top/bottom of the bars or else the volume is too loud.

  6. When the tape (or side) is done recording, hit the yellow STOP button at the top.

  7. Select File > Export Audio. Give it a name and navigate to where you want it to save to, such as the Desktop. Under "Save as Type" select either "WAV (Microsoft) signed 16-bit PCM" or "FLAC" so that the audio does not get compressed or lossy. Then click Save. You don't need to enter any meta data, just click OK again.

  8. Upload the exported WAV/FLAC file(s) either to Soundcloud (requires a free account) or https://mega.nz/ (no account required).

  9. Once uploaded, you will be able to share a link. This is what you can post to Reddit :)

    > But I only see holes for "6V/DC, ear spkr, MIC, REM". Am I going to need some kind of cord

    If your laptop has a "line in" or "auxiliary" port then you can run a 1/8" standard audio cable from the EAR SPKR port on your cassette recorder to this port on your laptop. Then you can follow the same steps above except in Step 3 you may need to change the sound-in device to "Auxiliary" or "Line In" whichever shows up. A lot of laptops have mic/auxiliary combined into one, and when you plug in a device it will ask if it is a microphone or line-in device. Select line-in device. You can look up your laptop model to see what audio input ports it supports. Then you can record in Audacity and follow all of the steps above and the audio will be a direct copy from the cassette. But the first method is certainly acceptable as well!
u/thisisbarao · 1 pointr/headphones

Hello,
Six months ago I purchased my Soundmagic HP150. Now the jack cable is dying on me, so I want to know if the amazon basics or this syncwire cable are compatible with the proprietary screw in. Thanks.

u/liquorsnoot · 0 pointsr/diyaudio

The 3.5mm optical cable cable is digital-only. It can't convert a digital signal to an analog one. The combination port also carries an analog signal for a 3.5mm miniplug stereo TRS or miniplug stereo + mic TRRS, but those are capabilities of the port hardware, not the cable.

Edit: I reread the question, and I get that you're looking for the jack hardware. No idea about that, sorry.