Reddit reviews AmazonBasics 3.5 mm Male to Male Stereo Audio Cable, 2 Feet, 0.6 Meters

I'm not proud with how long it took me to come up with this solution. However here is my solution for practicing in my apartment when everyone is asleep.

My CR35 doesnt have a dedicated headphone volume and i found that the preamp volume was too low to work when trying to run it with my AudioTechnica M50 headphones. My solution was simple, in line headphone volume controls; it's just an audio taper potentiometer in a fancy housing but it works really well. The potentiometer is a little aggressive for this application but you can always change it with a lower value one.

I'm not proud with how long it took me to realize I could do this, but let my shame be your boon!

Audio Volume Controller -... https://www.amazon.com/dp/B077KXKVRG?ref=ppx_pop_mob_ap_share

AmazonBasics 3.5 mm Male to Male... https://www.amazon.com/dp/B00NO73IN2?ref=ppx_pop_mob_ap_share

If you can't solve it with software, do it with hardware:

• 3.5mm Y-Splitter
  
• 3.5mm Male to Male
  
  If you don't need your own microphone, you need 1 Y-Splitter and 1 MtM. Connect the Y-Splitter to your sound output, connect the MtM to one end of it and to your microphone port.
  
  If you want to keep using your own microphone you should be able to do that with 2 Y-Splitters on the Mic & Sound ports, and a MtM cable connecting both.
  
  DISCLAIMER: I did not test this, but that's what I would try. I see no reason that this won't work.

You can use one of these with 2 of these. You can also get one of these for in line volume control.

FOR LOCAL GAMES Only - NextRadio app - http://nextradioapp.com/ Tune into local station that is broadcasting game (Ex: 94.1 WIP for the Phillies). Most modern phones have a radio tuner built in. You must use headphones or an audio cable plugged into the headphone jack on the phone/tablet which also acts as the antenna for the radio tuner. I have a 3.5mm Male to Male Stereo Audio Aux Cable https://www.amazon.com/AmazonBasics-3-5mm-Stereo-Audio-Cable/dp/B00NO73IN2 plugged into aux jack on my computer. this is only useful if you have no radio tuner available.

Why not just go >Lightning to 3.5mm
into > 3.5mm splitter into > male to male 3.5mm to your recorder, with the other end of the splitter going to your headphones?

Do the panels on your headphone cups click a lot? I also have the Plantronics BackBeat Pro 2's and they click so much when I move my head the slightest of degrees.

To answer your question, I would just use an amazon basic cable. Cable's will not affect the sound quality at all, maybe by like >.0001%.

https://www.amazon.com/gp/product/B00NO73IN2?pf_rd_p=d1f45e03-8b73-4c9a-9beb-4819111bef9a&pf_rd_r=4WR04EXGWK435QEVWA3R

You can connect anything to that projector using a 3.5mm cable like this. Or 3.5mm to RCA like this using the '3.5mm Audio Out' port noted on the images.

Pretty much any projectors I've worked with have had that same output, so that's fairly easy to deal with. As far as which bluetooth speakers have an input that you could use, I'm not 100% sure, but you just need to find one with a 3.5mm or RCA input.

On the projector, you say you're university kids, check out your school's surplus store if they have one, older projectors are usually really easy to find there for decent deals as the school upgrades equipment.

there's no need to use your phone as mic input to record messages. You can use your phone as output and record an input into audacity. all need is a simple 3.5mm male to male cable. Audacity can record the sound for you. What your trying to do now rerecord the audio, which will degrade the audio quality.

https://www.techhive.com/article/204664/how_to_record_streaming_audio.html

They worked fine for a time, but then the cable that came with it was accidentally cut, and when i found out they went out of business i kinda gave up on them for a little while.

Recently i bought 2 Stereo cables.... https://www.amazon.com/gp/product/B00NO73IN2/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 ... and a Y splitter. To see if i could get them to work. And then I ran into this issue.

Do you have any suggestions on cables for either option?

You would run an auxiliary cord from the Phones/Output there into your Computer's Line In - it looks like a 3.5mm, which is likely what your Computer's Line In takes, but you probably want to confirm that on both accounts.

If that was the case then something like this would work: https://www.amazon.com/AmazonBasics-Stereo-Audio-Cable-Meters/dp/B00NO73IN2/ref=sr_1_1?keywords=auxiliary&qid=1574900948&s=musical-instruments&sr=1-1

If that headphone jack is larger, like a 1/4" size you would probably need an adaptor as well, like this: https://www.amazon.com/dp/B07QNFGH61/ref=sspa_dk_detail_1?psc=1&pd_rd_i=B07QNFGH61&pd_rd_w=MBuYM&pf_rd_p=45a72588-80f7-4414-9851-786f6c16d42b&pd_rd_wg=k6ok6&pf_rd_r=E7CDMFPXWT2EM38G3WJ7&pd_rd_r=c68b423e-2c47-4d87-b86e-6fae7abd1548&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyTjNKTVVOTjFIMURNJmVuY3J5cHRlZElkPUEwMTQ5OTYzMThEVVdORU9TVUw4TCZlbmNyeXB0ZWRBZElkPUEwMDgzNzQzMVdWNk1ESVI1NjVSNSZ3aWRnZXROYW1lPXNwX2RldGFpbCZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

I'm assuming a few things there, but that's definitely a start!

I am pretty sure this could be done if your radio at work has a 3.5mm auxiliary input. All you do is use a 3.5mm male to male cable and connect one end in the S9 and the other in the auxiliary input of the radio at work. Then the phone will just use the cable as the FM antenna and instead of the sound outputting in your earbuds it would output in the aux input of the work radio. I have never tried this but pretty sure it would work.

​

Use a cable like this:

​

https://www.amazon.com/AmazonBasics-3-5mm-Stereo-Audio-Cable/dp/B00NO73IN2

​

​

For the pc audio, the cheapest way I can think of is to buy a male to male audio cable (https://www.amazon.com/dp/B00NO73IN2/ref=asc_df_B00NO73IN25082899/?tag=hyprod-20&creative=394997&creativeASIN=B00NO73IN2&linkCode=df0&hvadid=167122786755&hvpos=1o1&hvnetw=g&hvrand=2059792589148502649&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9026848&hvtargid=pla-284071178341 Something like this) and plug one into the gaming pc's audio out on the back of the motherboard and one to the audio in on the streaming pc's motherboard.
As for the head set situation, I dont really see how the cables would plug in (reply to me later in more detail how these work) but I think you could just buy some audio cable splitters and plug one into each pc, and if worse come to worse, have your headset connected to your gaming pc and call your stream pc on discord or skype. Hope this helps!

That's a really great idea, actually! I hadn't considered that Windows could even do that. So I could do it with something like this: https://www.amazon.com/AmazonBasics-3-5mm-Stereo-Audio-Cable/dp/B00NO73IN2?
When you raise and lower Alexa's volume on the Dot does it still adjust her individual gain independent of the PC volume?

AmazonBasics 3.5 mm Male to Male Stereo Audio Cable, 2 Feet, 0.6 Meters

https://www.amazon.com/dp/B00NO73IN2/ref=cm_sw_r_cp_api_i_TNbHDbMP1ZRJ3

It’s not as short as you want but the tips are very slim.

Is this what you are looking for?

edit: Here is one that isn't an add on item.

would this work?

A simple 3.5mm TRS to 3.5mm TRS cable is all you need. Nothing fancy, just make sure it doesn't look like crap. This one would work.