Reddit Reddit reviews AmazonBasics USB Type-C to USB 3.1 Gen1 Female Adapter Cable - White

We found 22 Reddit comments about AmazonBasics USB Type-C to USB 3.1 Gen1 Female Adapter Cable - White. Here are the top ones, ranked by their Reddit score.

Computer Accessories & Peripherals
Computer Cable Adapters
Electronics
Computers & Accessories
USB-to-USB Adapters
AmazonBasics USB Type-C to USB 3.1 Gen1 Female Adapter Cable - White
Connect standard USB Type-A enabled devices and peripherals (flash drives, keyboards, mice and more) to USB Type-C enabled devices (USB Type-A cable not included)Female adapter ensures easy connections and reliable performance, supporting data transfer up to 5 GbpsReversible design - easily insert the connector into any Type-C enabled device (does not matter which side is up)Type-C port is half the width and one-third the height of a standard USB-A connector (slightly larger compared to Lightning or Micro-USB ports)Certified by USB-IF to be compliant with USB 3.1 Gen 1 Standard; backwards compatibility to USB 3.0 and 2.0; power output up to 5V, 3 AmpMeasures approximately 5-1/2 inches long; backed by an AmazonBasics 1-Year Limited Warranty
Check price on Amazon

22 Reddit comments about AmazonBasics USB Type-C to USB 3.1 Gen1 Female Adapter Cable - White:

u/victorfabius · 3 pointsr/headphones

Listening to the Cobalt now. It's probably better if one has no experience with the Dragonfly Red. Since I haven't used the DFR, I'm a good candidate to have a better experience with the Cobalt.

The exterior containment (chassis?) and the logic board are not attached to each other, so there's some movement of the - chassis? - wiggling. Doesn't seem to affect anything in my use. The 3.5mm jack and USB port are both solid and have no give - unless you compare it to the wiggling chassis. While the concern over this wiggle seems overblown to me, I also understand why the concern is justifiable. It seems like a problem that could have been avoided by better or more exact measuring.

Getting low enough volume is an issue, because I have to carefully manually adjust the volume to slightly less than the first step on both Android and iOS. It's a minor concern. This is something I have to do with the (fake) Beyerdyanmic Xelento and Alclair Electro. Less so with the iSine 10, which I can tolerate one more step. Oddly enough, I can adjust the volume higher with the IMR R2 Aten. I also tried the Cobalt with Monoprice Monolith M1060 V1, and was able to get to a good volume for me. No clipping, but as a low volume listener, I'm not going to be pushing it with my gear.

I like the Cobalt well enough, but will probably sell it eventually. Is it worth the retail price? No. I probably couldn't tell it from a volume matched iPhone dongle (I'm not joking). Fortunately, my confirmation bias has set in, so I'll be using it for a bit. Currently happily streaming Tool's 10,000 Days from an iPhone through the Cobalt to the R2 Aten. Listened to Lateralus twice with the same combo. To Cobalt's credit, it doesn't get very warm, even in my pocket for all that time. Still, don't think I'll be recommending the Cobalt to friends I want to keep. Certainly not at retail price.

Oh, I also used this Amazon Basics USB-C to USB adapter and found no difference between that and the Dragontail except color, size, and shape. Seems to be an adequate alternative for me.

u/DozenCylinderV12 · 3 pointsr/Dell

You can purchase a USB Type-C to USB 3.1 Female adapter. They're quite inexpensive on Amazon.

Something like:

https://www.amazon.com/AmazonBasics-Type-C-Gen1-Female-Adapter/dp/B01GGKYYT0/ref=sr_1_3?ie=UTF8&qid=1549344669&sr=8-3&keywords=usb+c+usb+adapter

u/Kveldulf89 · 2 pointsr/Vive

Yes, plug in an adapter like this

https://www.amazon.com/gp/product/B01GGKYYT0/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

and route it under the Vive cable through the channel in the bottom, like this

https://ibb.co/epuHmn

u/THFourteen · 2 pointsr/oculus

Using this one

https://www.amazon.co.uk/gp/aw/d/B01GGKYYT0?psc=1&ref=ppx_pop_mob_b_asin_image

But is that any different to the Anker one? You got a link?

u/jecowa · 2 pointsr/mac

I'm not sure what was wrong with your previous adapter, but this one looks like the right type:
https://smile.amazon.com/AmazonBasics-Type-C-Gen1-Female-Adapter/dp/B01GGKYYT0/

The details indicate that it can be used with a USB type-A flash drive, keyboard, or mouse.

u/SergeantAtrex · 2 pointsr/Stadia

No get USB c to USB a it should work and could connect your headset through charging port of controller. AmazonBasics USB Type-C to USB 3.1 Gen1 Female Adapter Cable - White https://www.amazon.com/dp/B01GGKYYT0/ref=cm_sw_r_cp_apa_i_guwVDb0W1SS9X

u/pridetwo · 2 pointsr/headphones

The HP-A4's RCA plugs are for sending music out to speakers, not for sending your music into the amp. For android phones, you'll need a USB-B 2.0 to USB-A cable and a USB-A to USB-C adapter assuming you're using a phone with USB-C like Samsung S8, or Note8, or a USB-A to Micro-USB adapter if you're using a older/cheaper android phone like Samsung S7, J3, etc.

USB-B to USB-A cable: https://www.amazon.com/dp/B00NH11KIK

USB-A to USB-C Adapter: https://www.amazon.com/dp/B01GGKYYT0/

USB-A to Micro USB Adapter: https://www.amazon.com/dp/B00LN3LQKQ/

u/timrbrady · 2 pointsr/NintendoSwitch

If you're using a controller with a standard USB plug (USB-A),which most USB controllers are, you'll need an adapter that's USB-A to USB-C adapter. The Switch Pro Controller for example uses a USB-C cable to connect as a wired controller, so you can use a USB-C to USB-C cable to connect it to the Switch in tabletop mode.

Edit: I'd actually be interested to see if something like this would work for using multiple USB wire controllers in table top mode.

u/Meteorboy · 1 pointr/xboxone

Wait, what? Like this cable? https://www.amazon.com/AmazonBasics-Type-C-Gen1-Female-Adapter/dp/B01GGKYYT0

I'm not sure how you connect your Xbox controller to your phone. The Xbox One OG controller is wireless, so to make it wired, isn't the controller cable USB Micro B to USB A male? You connected that cable to the one in the Amazon link?

u/awes0m3sauce · 1 pointr/smashbros

You can also use a regular GC adapter, and use a USB to USB-C adapter to connect it to the Switch in handheld mode (like this one

Don't worry, i'm not stalking your profile, i'm just using the searchbar on GC adapters

u/IdmonAlpha · 1 pointr/podcasting

The Audio Technica ATR2100 is the most recommended beginner mic you'll find around here. It has a USB connection and an XLR connection, so your buddy can continue to use it if he decides to upgrade to an audio interface later on. (I just ordered one with the intention of using both at the same time for Skype reasons). He'll need something like this to connect the mic's USB cable to his phone.

I just did a quick Google and it does appear people are using their ATR2100s with iPhones and iPads. I suggest your buddy look at YouTube videos about it before committing.

u/sishgupta · 1 pointr/Switch

You COULD try a USB type A to USB C adaptor if they make it. Then plug your 2.4ghz dongle into the type A end of the adaptor, and the type C end into the switch.

There's no reason to think that a PC headset would ever work on a switch though, so it would not be a for sure bet that this would work. It's possible it may NEVER have a workaround.

https://www.amazon.ca/AmazonBasics-Type-C-Gen1-Female-Adapter/dp/B01GGKYYT0

u/shammikaze · 1 pointr/teslamotors

Interior:

u/RedrickSSBU · 1 pointr/smashbros

Multi-port stand/dock.

https://www.gearhawkstudio.com/?fbclid=IwAR3tcyAx6vb5vCFeHVVClS_QPiE9pPlWOr7Wxn-lFKkDV-VbMYKyqjIr834

Single port wireless adapter.

https://www.amazon.com/Wireless-Adapter-Nintendo-GameCube-Classic-Controllers/dp/B07JLF9PVG

Wireless GC-style controller.

https://www.powera.com/products/wireless-controller-for-nintendo-switch-gamecube-style-purple/

You could also get a stand for your Switch, and use a USB type-C adapter to connect any Gamecube adapter. The GC adapters only need the black cable to be plugged in for all four controllers to function, the grey end only provides rumble.

https://www.amazon.com/Compact-Playstand-Nintendo-Switch-Officially-Licensed/dp/B01N9RTMWS/

https://www.amazon.com/AmazonBasics-Type-C-Gen1-Female-Adapter/dp/B01GGKYYT0/

Lastly, there is another stand from Hori which comes with 4 USB ports and allows you to charge your Switch at the same time.

https://www.amazon.com/HORI-Nintendo-Switch-Multiport-USB-Playstand/dp/B01A827XHM/

u/The_GreatGonzales · 1 pointr/dbfz

This one?

AmazonBasics USB Type-C to USB 3.1 Gen1 Female Adapter - White https://www.amazon.com/dp/B01GGKYYT0/ref=cm_sw_r_cp_apa_LhrTBbS3NCJTK

u/LostHisDog · 1 pointr/oculus

I could be wrong but I think you can use it as a regular USB port too. It's just if you want to push video through it then that video is tied to your iGPU. For you case, it's just another, hopefully separate, USB bus to try. Not that you need to try it but something like this would give you one last option:

https://www.amazon.com/AmazonBasics-Type-C-Gen1-Female-Adapter/dp/B01GGKYYT0/

u/ct_the_man_doll · 1 pointr/VFIO

This is a strange question, but if you were to buy a USB C to A device, could you pass through the Thunderbolt controller and have the guess access the USB device directly?

u/KrispyKookie · 1 pointr/techsupport

I don't know if many cheap USB type C switches are available, but there are many regular USB 3.0 switches that could possible work with the correct adapters.

There may potentially be bandwidth limitations though, so be warned.

USB 3.0 switch: https://www.amazon.com/Female-Adapter-Macbook-Tablet-Mobile/dp/B01C43FUIW
USB C female to USB 3.1 male adapter: https://www.amazon.com/Female-Adapter-Macbook-Tablet-Mobile/dp/B01C43FUIW
USB 3.1 female to USB C male adapter: https://www.amazon.com/AmazonBasics-Type-C-Gen1-Female-Adapter/dp/B01GGKYYT0

u/WindWalkerWhoosh · 1 pointr/raspberry_pi

That would probably work actually, and you're lucky in that the pi-zero can be backpowered thru the usb data port. AND it seems you can make it act like a gadget, which I didn't know.

https://www.rmedgar.com/blog/using-rpi-zero-as-keyboard-setup-and-device-definition

Making a portable hack gadget? Have fun with it.

Edit: I'd just make it into an A-type and use an adapter like this unless form factor is important. That way you can use it on A or C.
https://www.amazon.com/dp/B01GGKYYT0