Reddit reviews ATZEBE Fiber Displayport Cable 60ft, Fiber Optic Displayport 1.4 Cable Support 32.4 Gbps, 8k@60hz, 4K@144Hz, Slim and Flexible Fiber DP to DP Cable
We found 4 Reddit comments about ATZEBE Fiber Displayport Cable 60ft, Fiber Optic Displayport 1.4 Cable Support 32.4 Gbps, 8k@60hz, 4K@144Hz, Slim and Flexible Fiber DP to DP Cable. Here are the top ones, ranked by their Reddit score.
✅ Ultra HD Resolution: The Displayport cable supports resolution up to 8K ( 7680x4320 ) at 60HZ and 4K ( 3840x2160 ) at 144HZ, ideal for Large game and Ultra HD video streaming, making your world clearer and more real.✅ High Speed 32 Gbps: 4-core optical fiber with triple-layer shielding to ensure stable signal transmission. Support 32Gbps bandwidth uncompressed signal transmission, never worry about blur, distortion and delay. Truly able to protect 8K images under long-distance transmission.✅ Durability & Flexible: 24K Gold-plated plug is strong conductivity and stable signal. Zinc alloy shell is wear-resistant and anti-corrosion, can effectively protect the internal chip. Slim and flexible cable with bending radius more than 20mm for easy installation in tight areas.✅ Note: It must be installed in the correct direction. The Cable with "Source" plug for connecting the DP source devices(PC/ Graphics Card/ ThinkPad); "Display" plug for connecting the Display devices(Monitor/ TV/ Projector).✅ 2 Years Warranty: ATZEBE Fiber Optic Displayport Cable provide a unconditional two-years hassle-free warranty, you can get full refund or replacement for free if quality problem. Any questions please do not hesitate to contact us via amazon at first. We will provide our best service and solution to you. *Note: Please read the product description below carefully before ordering.
Let me just start off by saying, even with just the few hours I've played with it, I LOVE this thing. Thank you valve for making such an awesome piece of hardware. And yes, my unit does have the joystick issue but it's just the feedback that's broken. My joysticks otherwise register without issue.
But anyways onto the good stuff.
What?
A 20m (65ft) cable run from my desk to right under the couch, so that the only hookup is the breakout / trident cable.
Why?
In my place, I ran into the predicament of the only space I had room to do VR was the living room, but given that putting my entire desk in the living room would have been weird aesthetically, I opted for the cable run, to get VR from the PC in the room across the house to my living room.
What parts?
Pretty simple actually, but it did require 2, not exactly cheap cables, and one coupler (prices in US Dollar).
The DP - DP coupler is out of necessity, given that no link box exists with the Index. Yes, it's an expensive solution. In addition to the $999 headset, I've spent another ~$231 on cable runs. But for my situation, it works flawlessly.
If you are thinking you need a solution like that, and any of the cables are unavailable (the DP cable is out of stock as of writing on July 6th), make sure to get fiber if you can for the sake of not losing quality over a copper cable. As for the USB cable, you're looking for an active cable. These typically have external power bricks to supply additional 5V power that your tower cannot do over such a distance. Edit: _However_, I have found that plugging in the additional power causes the computer to have issues recognizing any USB device, so I guess don't do that if you buy the same cable. Other cables may vary.
How is it setup?
I have the cables running along the basebords of the house, from my computer all the way to the living room. They take a right angle, and are gaff-taped down to the floor before running under the couch where they can become a loose coil [pic].
Does it work?
In a word, yes! I will update this comment if I run into reliability issues down the line, but it seems that this system works well enough, and has the added bonus of not hearing the PC fans spinning given the off-ear design of the Index headphones. (Edit: The only pitfall is that sometimes you have to power cycle the headset once or twice to get SteamVR to see it, but that doesn't take long. After that it's smooth sailing!)
Hope this helps anyone that might be needing a similar setup!
(EDIT: Numerous edits for spelling / grammar)
I use this USB extender and this DisplayPort cable along with one of these DP couplers with no issues. The DisplayPort cable is like double the length I need, but the price difference between the 10m and 20m one was only like $10, so I couldn't justify buying the shorter one, haha. Perhaps the length may be useful in the future!
Can confirm 13' with booster worked great, no sparkles. However, I ended up returning it all and going with a 30' fiber cable with a standard $5 coupler and that worked out as well, while being a little cheaper and a lot longer. Here's the cable I got:
https://www.amazon.com/ATZEBE-Fiber-Displayport-Support-Flexible/dp/B07QQNFKZK
No sparkles at all. In the time I've had it, I had the display very briefly cut out twice (just for an instant) but it was in the same game so I'm not sure if it was related to the cable. The game was No Man's Sky which just added VR support and it had a lot of issues, so I'm leaning more towards the game. Either way, it's been so rare that I would think it was worth it.
This is the Display Port cable I'm using. Specifically, the 60ft (20m) version:
https://www.amazon.com/gp/product/B07QQNFKZK/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1
which needs to be paired with a DP Coupler. This is the one I bought:
https://www.amazon.com/dp/B07JRGGWH7/ref=cm_sw_em_r_mt_dp_U_JvooDbD64BEQP?fbclid=IwAR202v1hw90YHxwzPg8d6--AfZPbiIGascJwdkoUH7iTQvadOpyhKYgoK9M
This is the USB 3.0 repeater I'm using. Again, the 60ft (20m) version:
https://www.amazon.com/dp/B0053YLYLC?ref=ppx_pop_mob_ap_share&th=1
I've been using this setup for the past few days with ZERO issues. Everything works perfect.