Reddit Reddit reviews Audio-Technica AT2020 Cardioid Condenser Studio XLR Microphone, Black, Ideal for Project/Home Studio Applications

We found 206 Reddit comments about Audio-Technica AT2020 Cardioid Condenser Studio XLR Microphone, Black, Ideal for Project/Home Studio Applications. Here are the top ones, ranked by their Reddit score.

Audio-Technica AT2020 Cardioid Condenser Studio XLR Microphone, Black, Ideal for Project/Home Studio Applications
The price/performance standard in side address studio condenser microphone technologyIdeal for project/home studio applications; The noise level is 20 db splHigh spl handling and wide dynamic range provide unmatched versatilityCustom engineered low mass diaphragm provides extended frequency response and superior transient responseCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. Output connector:integral 3 pin XLRM typeBlack speckles on the mic is the finish of the item. Audio technica case style: R7
Check price on Amazon

206 Reddit comments about Audio-Technica AT2020 Cardioid Condenser Studio XLR Microphone, Black, Ideal for Project/Home Studio Applications:

u/fmSamus · 17 pointsr/acting

I'm going to throw this edit on top because it trumps everything else: Can you honestly read out loud with a chest voice (no mumbling!!!) and can you act? It's painful to listen to people who can't do either. I've heard some newer people who read syllables word. to. word. in. stead. of. read. ing. like. a. person. ^ormumblinglikethey'retryingtokeepasecret


If you live in Atlanta, I have a great course to recommend that I'm almost finished with that sets you up with a reel during the course. It's a college certificate program through Vince Bailey who is a BOSS and pushes you to refine your voice. He's also a hustler and will teach you how to promote yourself. I'm really happy I took this course (and even happier my company is reimbursing me for it.)


Other than looking into classes, the equipment recommended by him (and what we use in class) are both of these TOGETHER:


  • Audio-Technica AT2020


  • Kaotica Eyeball


    We used these in a college classroom with buzzing lights and A/C units running. I couldn't hear a thing when we listened to them again, and if there was the tiniest buzz, it was edited out through Adobe Audition (he says if you master Audacity you can do just as good of work.) We also had a session in a real studio and side-by-side they were almost identical -- even to my friend who is an audio snob and hates USB mics.

    If a company is big enough and really wants to confirm studio quality, they will bring you into their studio. Alternatively, if you are nervous about your home setup, there is likely a recording studio nearby that will let you record for around $80/hour.


    Examples of some of my work in class after he edited them (Note: These aren't my best yet, he's editing the newer ones which blow these out of the water. I recorded these right after my grandmother died so I wasn't really in a peppy announcer mood. I'm also still new so someone will have something to say.)


    Personally, I'm going to opt for the Blue Yeti Pro Studio mic because I can get it at an insanely good price and it has extra hookups for when I do need the more advanced setups. I've heard it's just as good if not better than the AT2020.


    Yes, audio geeks and voice over superstars will disagree since they say USB newbies are saturating the industry. However, my teacher uses this equipment in various locations (noise-levels be damned) keep his "20 minutes or less recorded and mixed" reputation alive. His clients never notice he's not in a studio and he makes $100k per year on this alone through projects big and small.


    Another thing is to explore /r/RecordThis (paid) and free listings on Casting Call Club. My first gig was through /r/RecordThis for $90.
u/raviolibassist · 15 pointsr/WeAreTheMusicMakers

About 6 years ago I picked up the AT2020 and it's been serving me well ever since. I don't do much music recording these days, but back then it worked very well for acoustic guitar, mic-ing a keyboard and vocals. I haven't had the need to upgrade even though I probably should.

Any way, I think the Audio Technica mic you referenced should work fine for what you're wanting to do.

u/Goldilocks02 · 8 pointsr/VoiceActing

I'd agree with what the others are saying. I'd have very strong doubts about buying that.

When I was looking up what to get, there were lots of recommendations for the AT 2020 (not the USB one).

https://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK/ref=mp_s_a_1_3?keywords=at2020&qid=1574291411&sr=8-3

At the time, I couldn't get that specific model and went with the AT 2035 instead.

https://www.amazon.com/Audio-Technica-AT2035-Cardioid-Condenser-Microphone/dp/B002T45X1G/ref=mp_s_a_1_2?keywords=at2035&qid=1574291312&sr=8-2

Phones playing up so I can't actually see what I'm typing right now, but hope this is helpful! They're good mics and are a good way to get started. You'll need a bit of extra kit though.

u/chimpanzeeland · 8 pointsr/WeAreTheMusicMakers

So assuming that all normal PC components are included (PC, display, keyboard, mouse), as well as monitors or headphones, this is what I'd do:

DAW: Cakewalk by Bandlab [FREE]

  • Having a DAW should really be the first thing you look at. I don't use Cakewalk personally but I've tried it and for the price, it's unbeatable.

    Interface: BEHRINGER UMC22[$59]

  • A very affordable interface with the very good MIDAS preamp. Great value for all of your initial interface needs.

    Mic: Audio-Technica AT2020 [$99]

  • Again, a very affordable, but decent, mic. As it's a large diaphragm condenser, it's extremely versatile and will sound great on everything from guitar to vocals.

    MIDI Controller: Alesis VMini [$49]

  • For the budget, you'd only need a basic midi controller and Alesis is a tried and true brand in this price segment.

    VSTs/Plugins:
    I'd try to get by using as many free VSTs, as well as what's included in Cakewalk. Here's a list of decent free stuff that'd get you started:

    Guitar amp sims: LePuo free collection [FREE]

  • LePou is really the gold standard of free guitar plugins. With a bit of tweaking, they sound great. I'd definitely pair them with the TSE Audio TS-808 tubescreamer (also free).

    Drum sim: MT Power Drum Kit [FREE]

  • A Steven Slate-style drum VST with good samples and a decent groove editor. For the price, you can't go wrong.

    Other plugins:

  • For synths, effects and other plugins, VST4FREE is your friend. They have a great selection of free stuff.

    Assuming your PC is relatively recent and has enough horsepower to run a production suite, and you have monitors/headphones that are fine for mixing, this would be a great place to start out. Also, even after buying extras like cables, mic stands, pop filters etc, I'd say you have about $200-250 left for whatever genre specific stuff you'd want - whether it be a used guitar, a second mic (such as the Shure SM57 [$95]) or a second hand hardware synthesizer, for instance.
u/AvidyaZen · 7 pointsr/mindcrack

The headset that broke was the G35 headset from Logitech which goes for about $90 these days. It's a great headset but this would be my 3rd set in 4 years. The mic quality is average and often requires fussing with in post but overall it's a great headset.

While rocking this backup setup I've been using ear buds and I quite like it compared to the closed ear noise cancelling headset so I don't think I want to go the headset route again.

I've always wanted to go the XLR/Mixer route. This would allow me to manipulate any volume/noise issues with the mic on the fly and not touch it at all in post. I never settled on a solution that was afforable and always went with what I knew the G35.

This is the goal. It's not much more expensive than the G35 headset but is the correct tool for the job :Þ

  • Audio-Technica AT2020 XLR ^USB ^version ^exists ^too
  • Behringer Q502USB 5-Channel Mixer
  • XLR Microphone Cable
  • Microphone Suspension Boom

    A few notes about these choices. The 5 channel mixer is total overkill but this one functions as a USB audio interface meaning when you plug it in to your PC it shows up like a USB mic would. Behringer makes a 3 port USB mixer but I don't like the way it looks lol.

    Not all mixers have the ability to function as a USB device. On NON USB mixers you would have to run the output of the mixer into the input on your soundcard on your PC.

    I prefer the audio device approach. You plug your XLR mic into the mixer which is acting as the USB audio device. This allows you to control on the mixer what the computer hears on the audio device interface.

    Totally a long and involved answer but some might find it useful if in the market for audio upgrades :Þ
u/LSDoubleD · 7 pointsr/makinghiphop

To be honest, It really depends on what your budget is. If you have a $10,000 budget my recommendations are going to change drastically compared to if you have say, a $400 budget.

Assuming you want to keep price pretty low but still want pretty nice quality I recommend the following.

  • Microphone: Audio-Technica AT2020. It's a good mic for the price and most people start out on something like this or something similar. It delivers a good enough sound that you'll be happy with the results, especially considering how cheap it is.

  • Interface: Focusrite Scarlette Solo, This has kind of become the industry standard for beginner interfaces. It's a clean, simple interface. You hook it up to your computer, plug in your mic, adjust the volume and you're good to go.

  • Software: I personally started on Logic Pro X, If you have a Mac, I HIGHLY recommend it. Fantastic DAW, Arguably the next best thing to the industry's standard which is Pro Tools. Although it doesn't really matter what DAW you use. Most of them do the exact same thing, Just with different work flows.

  • Headsets: This doesn't matter that much. Find a pair of studio reference headphones in your price range and learn them like the back of your hand. Listen to tons of music on them, as much as you can. Some headphones boost certain frequencies and it's important you know what frequencies it's boosting so when you're mixing you dont add too much or too little of said frequency in.

    My one tip to anybody beginning is learn to mix and experiment. You can have a shitty mic and a shitty interface, but if you can mix well, You can make 90% of things sound at least decent and that's all that really matters in music. If you make a song that's a banger but it's not mixed that great, people will still listen to it. If you have a shitty song that's mixed by a world class engineer, nobody is going to listen to it. Don't get caught up in making sure everything sounds amazing, Just work and be creative.
u/talkingsmall · 7 pointsr/audioengineering

This is a good condenser mic for under $100: http://www.amazon.com/Technica-AT2020-Address-Cardiod-Condensor/dp/B0006H92QK. Condenser microphones really do scale with price (for the most part). This mic will probably be good enough, but you're going to want to upgrade if you start getting more serious about it.

Condenser mics require phantom power, so you'll want to make sure your interface has that option. It's usually a button that says +48V. You'll get no sound without phantom power.

Good luck!

u/PaulMorel · 6 pointsr/WeAreTheMusicMakers

You should do some reading before buying anything. To be frank, most of the people on this subreddit know very little about microphones. Here's a book I've learned from, and a book I suggest to some of my students.

You will get lots of recommendations for SM57s here. SM57s are versatile and useful microphones. However, if you only own a small number of microphones, then they aren't the right choice for you.

SM57s are what are called dynamic microphones. These microphones are not very sensitive, and they change the recorded sound significantly. They also suffer from what is called the proximity effect. The advantage of dynamic mikes like SM57s is that they are indestructible, and they don't require phantom power. For these reasons, they are often used in live situations (because they can take a lot of dbs without distorting), and they are often used as snare mikes. They are terrific for those purposes.

As studio mikes, they should be one of your last options (in most cases). If they're all you have, then you can make them work ...

But in my opinion, if you only have two mikes, then you should have a pair of large diaphragm condenser mikes. The most popular, affordable, and common large diaphragm condenser is the AT2020, although if you have more money, my favorite versatile large diaphragm condenser is the KSM32.

Now, why a large diaphragm condenser rather than a dynamic mike like the SM57/58?

The main reason is frequency response. Condenser mikes exhibit much closer to a flat (natural) frequency response. This means that they capture sounds more accurately. Dynamic mikes, on the other hand, color the sound significantly, rolling off both high frequencies and low frequencies.

This means that condenser microphones are more versatile. They can be used in more situations, and in more pickup patterns. Ultimately, this is why, if you only have two microphones, they should be two of the same large diaphragm condensers (preferably a matched pair).

For example, say you are recording an album for a band. They want to mix live tracks and studio tracks. With only two microphones, how can you record a live show for any type of band?

The answer is, you use a coincident pair placed in the audience at the show. This technique will work great with two condensers, but won't work at all with two dynamic mikes.

Next, say you want to record vocals. To do this with an SM57/58, the vocalist has to be aware of the proximity effect (the sound gets too bassy when the singer gets close), and you will have to use EQ to fix the strange frequency response of those mikes (which is good enough in a live situation). This task is much simpler with a large diaphragm condenser.

I could go on, but I am getting tired of typing. You will get a lot of uninformed responses to this question. I urge you to consider what I have said, and buy two large diaphragm condensers like AT2020s.

tldr: Two AT2020s and an Onyx Blackjack would be my suggestion. Total = $200 for mikes + $150 for interface = $350

(I think one AT2020 and the interface might be good enough for you to start with)

u/hereticjones · 6 pointsr/letsplay

You will not go wrong with the Audio-Technica AT2020 Cardioid Condenser Studio Microphone:
https://www.amazon.com/dp/B0006H92QK/ref=cm_sw_r_cp_api_ONrWzbV8KQ1R7

u/Silaryia · 6 pointsr/skyrimmods

If anyone's curious about getting an XLR setup, I can direct you to some pretty good starting gear! I personally use the Audio Technica AT2020 cardiod condensor microphone and a Focusrite USB audio interface. You'll also want to buy a male to female XLR cable of some kind. A pop filter is also a good investment! And, of course, you'll want a stand of some kind for the microphone. I personally use this but it limits your ability to move the microphone away from a desk.

If you want studio quality, be sure to record in 24-bit 48k, with an uncompressed format like a wav. That's the standard both Hollywood and indie productions have been using for years.

Oh, and if anyone's curious about credentials, I mix and record audio for commercials.

u/SinisterHumanoid · 6 pointsr/pcmasterrace

ATH-M50x's with brainwavz pads since the stock ones are thin and will fall apart after a year of heavy use. And a ModMic.

https://www.amazon.com/Audio-Technica-ATH-M50x-Professional-Monitor-Headphones/dp/B00HVLUR86/ - $150~

https://www.amazon.com/Brainwavz-Hybrid-Memory-Foam-Earpad/dp/B00ZGGG3KY - $30~

https://www.amazon.com/Antlion-Audio-ModMic-Attachable-Microphone/dp/B00R98O6R4 - $50~

Of course if you already have a mid the ModMic isn't needed. OR for just twice the price cut the second cord attached to your skull and get an AT2020 and even a Scarlett Solo for the best sound possible.

https://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK - $100~

https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B01E6T56CM - $100~

u/Copernikepler · 5 pointsr/starcraft

$99 microphone

You don't have to spend $300+ for a quality microphone. I have this mic and it is awesome.

u/ZombieFeedback · 5 pointsr/Filmmakers

As a long-time audio tinkerer who just got into video the past few years, seeing someone giving solid advice about audio makes me happy. I'd like to add two recommendations of my own:

There's no sale on it right now, but for $100, I'd personally put my money onto the Audio Technica AT2020. It has a very nice, neutral frequency response that doesn't get too extreme anywhere, and I can verify from personal experience with its big brother the AT2035(Basically the same mic, same diaphragm, same polar pattern, etc., etc., but with a few options that are useful for recording music, not as much for recording audio for video), that it's a great little mic for spoken voice. Even used it outside on a windy day with a lawnmower going in the background during an interview, and neither one gave it much trouble.

If you're willing to spend a little more money on your headphones, I can't recommend a set of Sennheiser HD280 Pros strongly enough. Very responsive and articulate for the price, very even, neutral EQ to let you figure out how to get the best sound from your audio track, great sound isolation to keep outside noise from bleeding in, comfy, breathing, don't squish your ears, durable and reliable as hell, I've used mine on professional recording sessions and mixes to great effect. They're a little more expensive than a lot of people will probably want to spend, but they're well worth a hundred bucks.

Also, please please please learn how EQs and compressors work. They can look intimidating when you're unfamiliar with them, but they're really simple tools at their core, and those two alone give you amazing control to manipulate your audio tracks, as well as clean up and save a less-than-stellar recording. If you can, also learn about how to use reverb, matching your voiceovers and audio tracks to the room they're supposed to be in can give them a really nice touch.

u/jake_patriots11 · 5 pointsr/buildapc

The Audio Technica AT-2020 or AT-2035 are both very solid and popular mics, going for about $100 USD and $150 USD respectively.

AT-2020 : Audio-Technica AT2020 Cardioid Condenser Studio XLR Microphone, Black https://www.amazon.com/dp/B0006H92QK/ref=cm_sw_r_cp_api_i_bfZ3BbDG5XSG1

AT-2035: Audio-Technica Condenser Microphone, Black (AT2035) https://www.amazon.com/dp/B002T45X1G/ref=cm_sw_r_cp_api_i_8fZ3Bb95F61MY

u/Balki-Bartokomous · 5 pointsr/recording

I have 2 audio-technica at2020s that I love for everything. They cost about $100 (on sale, and canadian. Probably cheaper everywhere else in the world).

I don't think you have to worry about AMAZING recording quality right now, you're just trying to start out, right?

I just picked up a Scarlett 2i2 second hand for around $100 too. This is what I'll plug my mics into, and what I would plug my bass into if I was going DI.

As for SM57 vs SM58, a couple of people I know swear by SM57s

u/blitzduck · 5 pointsr/battlestations

PC Specs

CPU: Intel Core i5 9600K (OC'd to 4.3GHz)

GPU: GeForce RTX 2060

RAM: G.Skill Aegis 2 x 8GB 3000MHz

MOTHERBOARD: ASRock Z390 Phantom Gaming 4

PSU: Seasonic G Series 550W ATX Semi-Modular Power Supply - 80 PLUS GOLD Certified

CASE: Phantek P300

STORAGE: 480GB SSD + 250GB Samsung EVO SSD + 1TB Barracuda HDD


Links for (almost) everything

MONITORS: $230 for the Asus, $120 for the LG

MONITOR STAND: $50

CORSAIR K63 COMPACT: $45 (got it on sale)

M-AUDIO CODE 49 MIDI: $400

LOGITECH G600 MOUSE: $80

M-AUDIO ATH-M40X HEADPHONES: $140

FOCUSRITE SCARLETT SOLO AMP: $210


M-AUDIO AT2020 MICROPHONE: $140

MIC STAND: $150

IKEA DESK: $40 per stand, $30 for table top, total $110

CHAIR: $90 (crappy Walmart brand. Does the trick but wouldn't recommend)

MOUSE PAD: $20

PHILIPS HUE LIGHT: $85

AUKEY LAMP: $45

PICTURE SHELF: $15

EDIFIER R19U SPEAKERS: $35

u/MyOpus · 5 pointsr/singing

Couple things... first, add POWER to your lower register. You got very muffled and flat when you dropped down, a good example is around 0:40. Watch a few videos on budgeting your breath to help sustain you when you drop down.

You have a few pitch issues, especially around 0:30 "everybody look to your right" the everybody was off. There were a few more like that as well. A good exercise for this is arpeggios.... learn them, sing them, love them :) They will help an aspiring singer a ton.

Finally, if you're serious, and since you're putting yourself out here for critique I assume you are, go ahead an invest in a good microphone and an interface so you can record yourself better. You can do it on the cheap with something like an AT2020 and a small Focusrite for around $200'ish. It will really make a difference.

You have some uniqueness to your voice, which is what everyone looks for, and you're already taking steps to improve and learn which means you accept criticism which is crucial if you're going to do anything in music... so good for you and keep working at it!

u/shab1b1 · 4 pointsr/buildapc

I know that a lot of streamers use the audio technica microphones so here's one. There is also the Blue Yeti. In terms of budget microphones, there is the Blue Snowball and the CAD u37. You also might want to consider an audio interface as well. Here's an excellent combo, cause its awesome.

u/djdementia · 4 pointsr/WeAreTheMusicMakers

Beginners kits get asked often here. Here is what I wrote up a few weeks ago for beginners kits:

A beginners kit on a tight budget ~$180:

u/IGAdam · 4 pointsr/InsideGaming
u/mellovibes75 · 4 pointsr/battlestations

Not OP but I can help you out here. Let's break this down by component:

  1. Speakers - There are two types: active and passive. Active = amplifier built into each speaker (i.e. most dedicated "computer" speakers from the likes of Logitech, Creative, etc.). Passive = 90% of speakers out there, must be connected to an amplifier to work. Typically passive speakers will get you a better speaker for a given price for an active but you have to figure in the cost of an amplifier. For a passive speaker set up, the cheapest system recommended over at /r/audiophile is a SMSL SA-60 amp and Micca MB42X Bookshelf Speakers. If your budget is higher, ask in the daily purchase advice sticky there (read the rules/suggestions thoroughly). I don't mess around with active speakers so I can't recommend any.

  2. Microphone - For simplicity's sake, I will recommend you look into USB connecting condenser microphones as they are affordable and have good sensitivity. Something like the Audio-Technica AT-2020 or Blue Yeti are popular mics for under $100. I have the Yeti and can attest that it is a very good and sensitive multi pattern mic. They can be hooked directly up to your PC or if you want to get really fancy, check out an audio interface like the Focusrite Scarlett Solo or Scarlett 2i2. The nice thing about an interface is it allows you get a nice mic with an XLR connector (generally better than a USB connection) and it will work with your PC.

  3. Headphones - Don't waste your money on "gaming" headphones. A nice 2 channel pair of cans with a standalone mic like I listed above will hands down outperform the likes of Turtle Beach and Razr headsets. /r/headphones has a really good wiki with more info than I can provide here and headphones broken down by price range and characteristics. Plus, then you can use them both for gaming and general music listening and have a good experience, something you don't get with dedicated "gaming" headsets. The amp I listed in the speakers section is fine for headphones but Schiit makes absolutely fantastic headphone amps and DAC (digital to analog converters, check out both /r/audiophile and /r/headphones for more info on them and why they are good for your set up) with very respectable price tags.

    Hope this helps. Higher quality audio equipment can be confusing and daunting, what with all the technical details, wide price ranges, parsing through all the marketing bullshit and the sometimes snobby attitudes of some "audiophiles". I wish you luck and feel free to ask me if you have any questions.
u/Trifax · 4 pointsr/VoiceActing

If you're going to do voiceover semi-regularly to very often on even your own projects casually, it's worth doing better than the Blue Yeti or Snowball. You can get a much better sound than that if you can manage a little more cash—I'm sure you can get creative.

AT2020 ($83), Behringer B-1 ($89.95), MXL 770 ($74.99) or 990 ($87.67), or the Samson CO1 ($38 used, $62 new).

All XLR condenser microphones, which means that you also need an interface and an XLR cable. The Focusrite Scarlett is the most popular and most affordable.

u/varii_ · 4 pointsr/tf2

If you want to have a popular youtube channel, you have to work hard at it my man. I can tell by watching a few of your videos that you are relatively young and I have to tell you by being young and posting here desperately looking for attention or views it will rub people the wrong way. Because to some, It just seems like from an outsiders perspective you're just looking for an easy way to get subscribers or views. Being young doesn't help either because there are many people who will be pretty mean to you because of your age or your voice.

As far as tips go however? There is a lot that can be said.

Point one: Increase the quality of your videos. Download a better recording program and learn how to use it.

I watched a few of your videos and I just have to be frank the video quality isn't very good but don't fret! There are programs that can help with this.


There are many to chose from but these are the main three:

http://www.fraps.com/

http://exkode.com/home-en.html

https://obsproject.com/

two of these are not free however. OBS is a free alternative that many use and it is pretty good!

If you do not like the fact that fraps or dxtory are not free, you can torrent or pirate those programs however, some people might think negatively of you claiming it is stealing. (But that doesn't matter anyways because pretty much everyone torrents or illegally downloads these two programs but don't tell people they do)

Anyways, to learn how to use these recording programs there are tons of tutorials on youtube to help you learn how to use any of those three, so good luck finding one that works for you.

Point two Now that you've downloaded an recording program, you should learn how to use an editing program to edit and compile the videos you recorded!

There are many editing programs but the main two I see being used are:

http://www.sonycreativesoftware.com/vegaspro

http://www.adobe.com/products/aftereffects.html

Like before, these programs are not free and are more on the pricey side so if you don't think spending a lot of money is worth it (and I do not blame you) Just download them for free like everyone else who makes youtube videos basically does but they don't tell people that they do.

learning these programs will take some time and effort and it might be a little challenging especially in after effects for a beginner but if you really care about improving your youtube channel you should practice using these programs, how will you do that though?

Well like I said before there are a number of youtube channels that have tutorials to help you with learning about those two programs. Just find a program that suits your needs.

Sony vegas is a little more easy to understand and pretty much can suit the basic needs of creating videos.

But after effects has a lot more to offer on the effects and editing side but is a little less easy to understand.

Point Three Buy some new equipment to be able to record your videos at a good quality.

You could make an entire thread out of the best microphones or the best audio equipment or the best PC setup.

All I'm going to say about this though is, invest in a computer set up that you can record comfortably with.

Today, you can actually purchase a desktop computer for about 500 dollars that can record videos surprisingly well!

http://pcpartpicker.com/user/Slash687/saved/ZhkFf7

for example, this build is 520$ and can handle recording videos amazingly well!

as for recording equipment? if you want to sound professional when recording videos, I highly recommend getting a studio quality microphone because I watched a few of your videos and your microphone and audio quality is kind of, subpar. So here are a few beginner microphones that are cheap and can make your audio quality sound better!

http://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK


http://www.amazon.com/Behringer-C-1-BEHRINGER/dp/B000CZ0RLK/ref=pd_pgd_B0006H92QK_B000CZ0RLK?pf_rd_p=2435182122&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B0006H92QK&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=0RYH88NBCZGCPQBVY0MK


http://www.amazon.com/MXL-770-Cardioid-Condenser-Microphone/dp/B0007NQH98/ref=pd_pgd_B0006H92QK_B0007NQH98?pf_rd_p=2435182122&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B0006H92QK&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=0RYH88NBCZGCPQBVY0MK


These microphones are relatively cheap and offer amazing sound quality for their price.

Now you need a pair of headphones to compliment your microphone because why would you buy a gaming headset if you purchased a microphone already. so here are a few I suggest, a few of these are more on the pricey side but I highly recommend them.

http://www.amazon.com/Audio-Technica-ATH-M50x-Professional-Monitor-Headphones/dp/B00HVLUR86/ref=sr_1_4?s=musical-instruments&ie=UTF8&qid=1463810110&sr=1-4&keywords=audio-technica+ath-m50x


http://www.amazon.com/Sony-MDR7506-Professional-Diaphragm-Headphone/dp/B000AJIF4E/ref=pd_pgd_B00HVLUR86_B000AJIF4E?pf_rd_p=2435184362&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00HVLUR86&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=0GDVMZJNTK63SMPGS8TT


http://www.amazon.com/Sennheiser-HD-280-Pro-Headphones/dp/B000065BPB/ref=sr_1_sc_1?s=musical-instruments&ie=UTF8&qid=1463810155&sr=1-1-spell&keywords=Senhessier+HD+280


It's all about fitting your price range and preference.

Find a set up that works for you.

Point four don't forget to be yourself, have fun and keep making content!

Having a personality an audience can relate too is great and all but you should just stay true to yourself and remain genuine when creating content.

There are many people trying create and make TF2 content like you. So having too many copy cats of the same content creator or personality can just seem boring. Why go to someone who creates virtually the same content of someone else? That's redundant and doesn't make a whole lot of sense.

And you should also try to always make content. Never stop making content, making content is the way you get your name out there. Just keep creating content and be dedicated, never give up making stuff.

So, try to have fun with it and think of creative ways to attract an audience to your content. What new fresh idea and creative content can you offer that nobody else does?

If you can do that while remaining true and genuine to yourself your audience and you don't give up. I feel like you would be able to grow as a creator.



That is all the tips I can give you, I'm not much of a content creator myself but from an outsiders perspective I hope this helped you in anyway.

Good luck and have fun with it man.

u/Trees_And_Porn · 4 pointsr/battlestations

Hey guys! I know this just looks like a generic RGB battlestation. I recently just bought a house for myself, and was finally able to set up my own gaming room, and I wanted to show it off .I plan to eventually set up my VR stuff in this room somewhere. I know the photo quality sucks, but I don't own a camera, and my iPhone camera sucks.



Case - NZXT Phantom 410


Mobo - ASUS TUF SABERTOOTH Z97


CPU - i7-4790k Devil's Canyon


CPU Cooler - NZXT Kraken X42


RAM - Kingston HyperX


GPU - ASUS ROG GTX 1070


Storage - Samsung 860 PRO 1TB


Keyboard - Ducky Shine 4


Mouse - Corsair Scimitar


Headphones - Sennheiser PC 360


Microphone - Audio-Technica 2020


Audio Interface - Focusrite Scarlett Solo


Monitors - Asus VG248QE x2

u/Pyroraptor · 3 pointsr/letsplay

I would like to throw in a third option which is the AT2020 XLR and a mixing board.

AT2020 USB $130

AT2020 USB Plus $170

AT2020 XLR $100 and Behringer Xenyx 502 USB $60

Not only is the microphone better in the XLR (see the specs, the XLR version has a better frequency response) but you get a lot of nice features using an XLR mic such as a gain knob, EQ, volume knob, etc.

u/tcookc · 3 pointsr/WeAreTheMusicMakers

Yep - most large diaphragm condenser mics are going to have pretty good bass response...buuut, I'm skeptical of buying used mics. You never know if they've been mishandled, dropped, had smoke blown into them repeatedly, etc. Here are some mics that I would suggest at different price levels:

AT2020 ~ $70

AKG 420 ~ $190

AKG C214 ~ $400

AT 4050 ~ $700

AKG 414XLS ~ $1000

u/Obscure_Username_ · 3 pointsr/Twitch

If you want to future-proof your setup, go with something XLR based, and later down the road you can upgrade and replace stuff on the cheap.

I personally use an AT2020-XLR on a cheap mic stand that comes with a shock mount and built in cable (gets a bit squeaky after a few months of use, but only when fully retracting it), piped through a phantom power supply and an XLR to USB cable

A really good mic to go with would also be the ATR 2100 as it is both XLR and USB. It's a dynamic mic, so background noise won't be much of an issue. The price point is great, and it would be easy to expand on later. I personally have no experience with the mic, so take that as you will.

u/ColsonIRL · 3 pointsr/kindafunny

It's worth mentioning that before they got these new mics back in August(ish), they were using AT2020s, which are currently $79.

u/turbowillis · 3 pointsr/musicians

I've got an Audio Tecnica AT2020 that I put on a shock mount, and I use it for vocals, sax, and as a room mic in rehearsals. I'm really happy with it, and it didn't break the bank. It requires phantom power, so be sure to turn it on on your interface.

u/SuperDuckQ · 3 pointsr/audioengineering

I also just checked Amazon - I don't know if it's a sale or what, but $68 is a damn good deal.

u/Lv100Shuckle · 3 pointsr/audioengineering

If you're clueless about equipment and programs, would it be fair to say you are also clueless to such extremely vital fundamentals as Signal Processing?

If so, this YouTube channel is very good at explaining even the more difficult concepts very simply. His series on Compressors is especially good, which is great since it's important to know.

To get a super basic setup going for a home studio, start off by getting yourself a nice cheap DAW, such as GarageBand, Reaper, or Audacity. DAW stands for Digital Audio Workstation, which is the primary program you will be doing all your audio editing with. Also important to have are a decent set of stereo speakers (known as Studio Monitors in the industry) and/or headphones. Try to get a pair with as wide, and perhaps more importantly neutral, of a Frequency Response as possible.

If money isn't tight, get yourself a good audio interface such as the Focusrite Scarlett 2i2, along with a decent microphone setup such as this AT-2020 Bundle on Amazon.

As you get more advanced, you can work on getting better gear, nicer plugins, and a more efficient DAW (Pro Tools, Logic Pro X, Adobe Audition, etc) and also soundproofing your studio with acoustic foam. NEVER stop learning. Find and watch YouTube videos, read articles and forums, and master your DAW (hotkeys and all).

I personally am more of a Post-Production for Film/TV/Games kind of guy, so I can't go too much more in-depth about the music side of things. But if you also want to do Post-Production, here are some great resources to get you started!

u/slash178 · 3 pointsr/Guitar

There is no way this mic has ever been sold for $200. They inflate the numbers so it looks like a big discount.

Try the AT2020, a world famous budget condenser mic.

u/iansteele · 3 pointsr/WeAreTheMusicMakers

So when recording vocals and guitar at the same time, like you'd like to do, the debate on what to do is really about how much control you want over editing in the end process.

- If you don't care about control on the individual levels of guitar and vocals AND want to record in one take with both instruments, all you need is one mic, XLR, Mic stand, headphones, and an interface to get the signal into your computer.

In this situation, you need A. and Interface that is cheap but not a POS because it really affects the sound of your recording. Behringer makes a cheap interface for 1 Input (microphone) and actually has a decent Preamp in it. B, you need a microphone and cable (XLR, Balanced) to capture the sound and send it to the interface. This area people could talk forever about, but for just getting the job done and a decent sound, AT2020 Condenser (Currently On Sale) is a great option for capturing both your voice and guitar. any XLR will do $10 or something like that.

- If you wanted to track the guitar and vocals separately, one at a time, the only change I would make is the microphone. Shure SM57 would do great for vocals and guitar individually. There have been many singles and albums in the rock, acoustic, and folk category recorded on these mics alone with fantastic results.

​

- If recording the guitar and the vocals at the SAME TIME is the route you want, it's definitely possible. 2 Input interface, Two mics, Two XLR's, Two Mic stands, headphones.

- a change in interface is needed from the first behringer to this one because they have the same sound only difference is the amount of inputs for ~$50 more. Next would be buying two microphones, both options listed above are probably going to be the cheapest you'll find with a decent sound. You can find packages like this on guitar center and other audio retailers, but the mics come with a lot of bad frequencies in my opinion, but hard to argue $99 for two microphones. get the cables, plug everything up and record enable two live tracks in you preferred DAW.

​

As far as the computer goes, Ableton hands out free versions of its "lite" program, and I believe you can record in that version. That would be the best route in my opinion for DAW, Reaper is a good option, I'd stay away from fruity loops if you are mainly just going to be recording audio.

Most of these solutions will put you under or around $250 so I hope this helps, if you have more questions let me know.

u/RaN96 · 3 pointsr/letsplay

Normally I'd advise against Blue mics but this is a really good deal.

Edit: audio technica AT2020 USB is on sale as well for $99:

http://www.amazon.com/dp/product/B001AS6OYC/

and for those of you who have a mixer, the XLR version is $80:

http://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK/ref=sr_1_2?s=musical-instruments&ie=UTF8&qid=1417208180&sr=1-2&keywords=Audio-Technica+AT2020

u/The_iron_mill · 3 pointsr/letsplay

My budget recommendation for this would be a condenser mic such as the Behringer C3. I did a short video for some audio solutions, and gave a short demo of the C3 in this video.

Other good mics:

Shure SM27

Rode NT2A

Audio Technica AT2020

EDIT: Formatting

u/JohannesVerne · 3 pointsr/VoiceActing

Just project with your voice, and keep the mic about 6" away. If you get farther from the mic, you will pick up a lot more reverb from the room, and have a higher noise floor (the gain would need to be higher, and so everything else would have a raised volume too).

​

As far as interfaces go, the Behringer U-Phoria UM2 is the cheapest I know of that will still give you a good sound, or there is the UMC22 which has slightly better preamps (which shouldn't be an issue unless you are using a dynamic and need high gain to get a good volume). The Focusrite Scarlet Solo is also really popular, if a bit more expensive (~$100). As far as the mic goes, the AT 2020 is very popular, although I prefer the MXL V67G which is also a bit cheaper, or the Lewitt 240 Pro if you have the money (I use the 440 Pure, but it's more expensive, so not the best place to start). Hopefully that helps, at least to get you started. I know I listed a lot of gear here, but it isn't the gear that makes you good, it's lots of practice that will really make the difference. While you will need some gear to get going, there are plenty of pros that use the AT2020 and the scarlet solo for all their recording, so don't sweat about all the high-priced stuff. The top end products do have benefits over the "beginner" gear, but not so much that you need the high end stuff to record professional sounding audio.

​

So the cheapest setup will run you around $100, although you will also need a mic stand, XLR cable, and pop-filter (which are all fairly cheap), and a shock mount is recommended. You will also want to make sure your space is acoustically treated well, as a good XLR mic will be sensitive and pick up any extra reverb, but I didn't hear anything out of place and echo-y in the demo you posted, so you may have enough treatment already (you will have to play around with it).

​

Here is a test-track I threw together that hopefully demonstrate the tone and pacing I mentioned in my first reply, and also give an example of how focal fry can be used to good effect (I don't have much in my voice, but when used properly it can add a lot to a performance). It's just my voice, no extra effects (slight EQ was applied), to be as clear as possible about the difference in tone quality. I was going to throw it in an edit of my original, but it will fit just as well here. It's not an actual demo, just a piece I did to cut in as part of a demo, but hopefully it gives you a better idea of what I was talking about.

u/beley · 3 pointsr/podcasting

I did some testing with multiple USB microphones and was able to setup a virtual audio device in Mac OS and Windows. They were different microphones, but I would assume if they were the same make/model it would have worked as well. The quality was okay, but you've got a lot of room for interference and bandwidth issues on the USB bus doing it this way. What I did and what I recommend you do is move to XLR microphones and a USB audio interface. I have the Scarlett 2i2 but for more than 2 XLR inputs you'd need to upgrade to a 4 or 8 port version. This Behringer 4-port interface is only about $129. Then you'd just need 3 XLR microphones, I have the MXL 770 which goes on sale pretty regularly for about $65. The Audio-Technica AT2020 is also a great choice under $100. The ATR2100 is also a surprisingly good podcasting mic and has both XLR and USB output.

u/Chuuno · 3 pointsr/WeAreTheMusicMakers

the 2i4 is a great choice, I've got the 2i2 and it's delightful, zero issues since day 1.

I'd recommend These Sony's for headphone monitoring as well as keeping a pair of desktop monitors on your "to buy" list, as headphone monitoring can hide phase/bass level issues among other things. That being said, those AKG's should be fine, particularly if you've learned where they add their own flavor.

I don't know that Samson mic, but since you're looking at condenser mics you should consider this Audio Technica AT 2020. I've been using it to record rap/spoken word vocals and things have been incredibly clear and bright, particularly when compared to the rode M1 dynamic microphone I was using before (Did not know what to buy when I got the M1, $100 lesson learned).

The Accessories you've picked out look good, tripod stand FTW, but what do you have planned for sound dampening in your recording space? At the minimum, I'd recommend buying a heavy duvet/moving blankets and hanging them in the area behind the vocalist. I have a very poorly treated room, but that duvet trick makes it sound like I have a decently treated room.

What pointed you to Condenser over dynamic microphone? Are you planning on recording the electric guitar clean from the 2i4, or will you be mic'ing the cabinet? Are the vocalists your looking to record going to be using a lot of dynamic range?

u/bigfella42069 · 3 pointsr/trapproduction

Audio-Technica AT2020 Cardioid Condenser Studio XLR Microphone, Black https://www.amazon.com/dp/B0006H92QK/ref=cm_sw_r_cp_api_i_fgRiDbHAD6JCX

pretty good one

u/3agl · 3 pointsr/pcmasterrace

As I said, if sound quality isn't really the issue and you're just using voip, the gear he has is fine. Also that's a pretty nice audio interface that'll last op for quite a while.

Alternative with better value and slightly better specs Second xlr/1/4 in, and it comes with studio one and midi input/output. Pretty good bang for the buck.

I have this and it's really nice. Also I've filled up all the inputs and outputs so ¯\ (ツ)

A Higher quality and well recommended mic would be the AT2020

I have an sm58, used, these can be found in the 50-100$ range, and they tend to live very long and kick a lot of ass. There are stories of these mics falling out of moving vehicles on tour and then (once picked up) continuing the tour working just fine.

I have a pair of ath m50xs but the m40s are also a great pair of headphones, and a real budget would be the m20s if you're looking for headphones.

I know you asked for budget, but op did a pretty good job already so if you don't really care about recording then get what OP got.

u/pat_trick · 3 pointsr/NewToTF2

This one.

...seriously, you can do just fine with a basic mic and headphones.

u/SirSparrow · 3 pointsr/Songwriting

Buy a Scarlett 2i2 USB interface

Download Reaper (a free Digital Audio Workstation)


Buy an Audiotechnica AT2020, a great all-purpose mic


Take songwriting classes and production classes, or try and find lessons on Youtube or something. Learn music theory and how chord progressions and good melodies are written. It doesn't matter how good your hardware/software is if you don't first spend a lot of time learning how to create a well-structured song.

If you don't understand how chords and melodies fit together, and how to make a well-structured lyric (at least subconsciously) at a music theory level, it will be very difficult for you to progress if you are trying to make catchy music - Find a professional and invest in classes!

u/LTFH · 3 pointsr/roosterteeth

Nope, they use the Audio-Technica AT2020 or something very similar. I used to have the same one :)

u/demonic_intent · 3 pointsr/audioengineering

IF you arent trying to spend too much money on it, I'd recommend just heading to a local studio and renting some time to record what you need. That is, unless you are trying to make this a regular thing.

I'll go ahead and throw some links up on what I list as good, low-budget options to get you going.

I'd recommend getting a cardioid condenser mic (AKG AT2020 ~$100), an audio interface with at least one mic preamp and phantom power (Scarlett Solo ~$100), and a pop filter (Audio 2000s AWS4071 ~$10). You'd also need a DAW to edit the tracks, such as cutting out long pauses and words you didn't intend to make into the final cut, and adding a bit of compression and EQ changes. Most likely the audio interface will come with an intro DAW that'll do just enough for what you want to do. For better results you can also pick up an acoustic shield (Monoprice 602650 ~$65) to help isolate the sound, which doesn't seem important just getting into it but once you hear the difference you'll see why its important. Oh, and you'll need to get an XLR cable (~$8) to plug the mic in, but you may or may not want one that's a bit longer than the one I linked.

Something I want to throw in there as well is you'll also probably want to learn how to get on de-essing. In a vocal take, often times an "s" sound will come out very harshly if left unedited. A method to avoid this is to not talk directly into the mic, but slightly off center. Alternatively, you can buy a VST or program that can do it automatically for you. Also, a good thing to do is to reduce noise either through careful automated eq cuts or by using a program such as reafir which can be downloaded for free from the developers here.

If you do get involved with all this craziness, and I know its all pretty intimidating, I'd be happy to help you get on your way to making some great recordings. Just send me a message any time.

u/KleyPlays · 3 pointsr/Guitar

My generic recommendation for recording is to buy a microphone and an audio interface. Not sure what your budget is, but something like this mic and this interface would be a great setup.

I have some more in depth guides here:

http://www.kleydejong.com/2016/10/a-beginners-guide-to-home-recording.html

http://www.kleydejong.com/2017/04/step-by-step-guide-to-recording-guitars.html

u/Nine_Cats · 3 pointsr/WeAreTheMusicMakers

Assuming you mean acoustic guitar, the cheapest setup I would recommend is these three items:
GLS Audio ES-57 which is $40 and very similar to the legendary SM57.
AT2020 condenser microphone for $50.
Focusrite Scarlett 2i2 recording interface for $150.

You'll then need cables and stands, which will run you $40 at the cheapest, but you might want to get some better cables which can be around $10 each.

I recommend cables with rubber connectors like this, the ones with smooth metallic ends generally have really terrible soldering and are very breakable.
(Ones like this are okay).

This is a lot better than just getting a microphone that already has USB, and the AT2020 for $50 is a steal.

u/bonesnaps · 3 pointsr/bapcsalescanada

There's an audiotechnica at2020 for $100 up right now too - amazon prime only (only xlr version available at that price).

Seriously considering picking one up since I have an audio interface with 48v phantom power already. It's a brand that seems alot more reputable than Blue, that's for sure.

Kind of overkill for gaming, but I might use it for recording as well (I play guitar / synths too).

I'm just tired of shitty mics / shitty headsets that only last 1-3 years. The at2020 is built like a tank I'm pretty sure.

Also doesn't come with a stand, so just a heads up.

u/affordavoice · 2 pointsr/VoiceActing

I use these two:

Audio-Technica AT2020 USB:

http://amzn.com/B0006H92QK

MXL V67G:

http://amzn.com/B000JRPYGE

The MXL is my preferred of the two, but it is an XLR mic so it requires an audio interface (I use an M-Audio M-Track), or at least an XLR to USB adapter.

u/ActionKbob · 2 pointsr/letsplay

You do need an XLR for mixers.

I bought the AT2020 USB mic first, and I had the same problem you are having, my PC fans were WAY TOO LOUD. And so I bought This Mixer and the XLR version of the AT2020

USB mics are great when you have a studio or if they are dynamic. USB condensers are only great if you use a studio.

The benefit of condensers is that they are great vocal mics. The pick up a very good range of frequencies, and allow your voice to come in crisp. But that also means that a lot of background noise will come with it, so you need to be able to reduce way comes through, and even still post editing is a must.

u/6memesupreme9 · 2 pointsr/Kappa

Then youre a fool because this shit is literally entry level, has what you need and its pretty good when you consider the price. This is an upgrade an everyway (Blue yeti mic is slightly worse than this but not a huge noticeable amount). After that mic youre looking at several hundreds price range.

So no $100 isnt entry level unless youre talking about doing something other than twitch/discord shit. You dont know what the fuck you on about fam.

u/brettmac808 · 2 pointsr/Twitch
  1. Microphone

    https://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK

  2. USB Audio interface Option #1 (Has RCA + 1/4 inch balanced)

    This is the golden standard for high quality Mic input as well as output. The audio drivers on the Scarlet models are simply crisp and clear. There are other options that work, but like a bicycle...they all ride different. This is simply the very best without a doubt at your price range. You could easily spend $500-$700 on an audio interface, but for youir streaming needs, this is literally perfect

    Note, this is what I utilize for my Stream, and get compliments on the professional audio quality of my Mic almost daily.

    https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B01E6T56EA/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1525297509&sr=1-1&keywords=scarlett+2i2

  3. USB Audio Interface Option #2 (Has RCA outputs only)

    *Next best option, if you do not plan to run to Speak Monitors like KRKs or Mackie's. This will give you the same quality of audio input from your Mic. But if you are planning to use Monitors, the 2i2 above will give you the best output audio quality being that the 1/4 inch is balanced audio.

    https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B01E6T56CM/ref=sr_1_3?s=musical-instruments&ie=UTF8&qid=1525297603&sr=1-3&keywords=scarlett+solo

    Trust me. Anyone who knows what they are talking about when it comes to audio, not just streaming...will agree. LMK if you have any questions...happy to help.
u/v_m_ · 2 pointsr/makinghiphop

It's kind of hard trying to fit into that budget. I'd suggest saving till you can get a somewhat okay setup. A decent audio interface would be the Focusrite Scarlett 2i2 but it's $150.

Might try looking into this:

Interface:
http://www.amazon.com/M-Audio-2-Channel-Portable-Audio-Interface/dp/B00BQ6KSN6/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1425251263&sr=1-1&keywords=m+audio+usb+interface

Mic:

http://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK/ref=sr_1_3?s=musical-instruments&ie=UTF8&qid=1425251333&sr=1-3&keywords=xlr+condenser

Sorry for the long links. I personally have the AT2020 and I love it as a beginner mic. Just learn to mix okay and you'll be set.

Also if you can't/don't want to buy a pop filter (assuming you have a stand or desktop tripod thing) you can make one out of an old wire coat hanger and some pantyhose (yeah it's kinda weird, but it works okay as well)

Hope I could help.

u/lumpofclay · 2 pointsr/WeAreTheMusicMakers

I was looking for an interface a few months ago as well and eventually bought the Focusrite Scarlett 2i2. I have been REALLY satisfied with it and do recommend it highly. Its preamps have been praised highly and I also think they are very good and I am convinced that you get very good bang for your buck value! The sound quality is excellent, it's easy to install and a joy to work with.

However you should be aware of the two following points that get mentioned often:


u/drelloktv · 2 pointsr/Twitch

1: personally, i use a Logitech C920. It's really nice, but also overkill since you don't need to put out 1080p video from your cam to have good quality. It's on sale currently on amazon though.

2: i just started using an Audio-technica AT2020 and so far I love it. They make a usb version of it as well.

3: My green screen cost me $18 bucks for a 6' x 10' screen. I would make sure that you get a green screen made from muslin fabric.

u/Lat3nt · 2 pointsr/audiophile

Get a M-Audio Mobile Pre and 2 Samson C02 small diaphragm condensers. I have this set up, and it sounds pretty damn good for the price. If you find you really like recording stuff, Tascam makes great interfaces with many more inputs. Shure SM57 is another great dynamic mic and built like a tank. If you want large diaphragm condensers, The Studio Projects B1 and AT-2020 are both great.

u/Nurlo · 2 pointsr/roosterteeth

Dunno about the stands and pop filters, but I believe the mics are AT2020s.

u/lenswipe · 2 pointsr/microphones

Try this plus this. It's the setup i use and it works very well indeed.

u/GinkoWeed · 2 pointsr/microphones

If you could originally purchase the Floureon(Isn't that a Pokemon?), then you should probably look at a Blue Snowball, assuming you have to have a mic right now. If not, save up some money for something like an AT2020.

The mics you found are probably fine, but I only recognize Neewer, and even then, I only know them because they make one of the best mic stands for the money.

u/smoitie · 2 pointsr/audiophile

1. What is your budget?

My ideal spend is listed below. I can probably go to £450 / ~$560

2. What are you looking for?

I'm looking for a beginner-ish set up for use with my PC. This is what I've come up with so far and just wanted some input, see what I can change etc.



Component | Price
---|---
Focusrite Scarlett 2i2 | £124.00 / $154.99
Audio-Technica ATH-M50X | £128.00 / $159.93
Audio-Technica AT2020 | £89.99 / $112.48
Boom arm and pop shield | £17.98 / $22.49
Edifier R1000TCN 2.0 Bookshelf Speakers | £45.95 / $57.48
Total | £405.92 / $507.71



I'm looking for middle of the road but excellent quality gear. This list was compiled by research and reviews on the best bang for your buck components.


3. How will you typically be using the gear?

Speakers will be next to my monitor so ~arms length away.


4. What gear do you own?

Unfortunately I own a "gaming" headset. It was cheap at the time I purchased it and I never gave it a second thought but now I think is the time to upgrade to a proper set up.

5. What do you intend on using for a source?

The source will be my PC.

6. What material will you be using your gear for?

This will be typically used for every day gaming, streaming, and listening to music through streaming services. I usually wear headphones for very long periods so comfort and lightness are extremely necessary. The bookshelf speakers listed above are only cheap ones for this reason, as I listen through headphones the majority of the time. The music I listen to varies quite a bit depending on the mood, from djent and tech metal, to lounge and soft house.

edit: clarity

u/yacoose82 · 2 pointsr/GWABackstage

Something large diaphragm condenser. It'll give you the ability to pick up the subtle nuances of your voice and usually has a larger dynamic range than a small diaphragm condenser or any other type of mic (minus a great ribbon mic). The drawback is a lower SPL (loudness). So just don't go trying to mic and electric guitar amp.

In a field where mics can cost from a couple of dollars to tens of thousands...

I'd recommend the Audio Technica AT2020. It's a great entry level mic with a great range and decent SPL. It also comes in a USB model as well.

Additionally, any mic for recording should be used with a good pop filter. You can even make one.

Former audio engineer.

EDIT (Nov 26) All of the above was typed on my phone late at night where links are difficult to do (and I was falling asleep).

Here's the AT2020 and the USB Model

Additionally, the v67g is a great mic. I used to own one but gave it to a friend.

u/aeon_orion · 2 pointsr/audio

The best mic in that price range is going to be the AT2020. I'm assuming you have an audio interface, stand etc, for it. You'll also need a pop filter.

Edit: if you don't have an interface there's a USB version of this mic that is $30 more expensive. It should be good but I've only used the XLR version of this mic.

u/BobaFettThicc · 2 pointsr/buildapc

Ok.

If you want to pursue good audio I recommended the PreSonus Eris 3.5, they are good budget studio monitors. For headphones, I would recommend the Beyerdynamic DT 990 Pro 250 Ohm version. These are very good headphones for the price. Then I would pair the Beyerdynamic headphones with a good Audio Interface like Focusrite Scarlett Solo (3rd Gen) it's a good budget audio interface that doesn't break the bank. For a microphone, a Blue Yeti USB mic will do well. However, if you want an XLR microphone, which is better btw. A well-rounded XLR microphone is the Audio-Tecnica AT2020.

u/dougiefresh1233 · 2 pointsr/roosterteeth

You're probably right about the headphones

For Mics they either use the Audio-Technica AT2020, or different model from the same brand(the AT 2035 maybe).

For Webcams they use the Logitech c920.

Their chairs are DX Racers

For capture cards I think they use El Gatos

They used to use Alesis MultiMix 16 mixer, but they may have updated to something newer.

They're keyboards, monitors, and I think mice consist of whatever they happened to have on hand at the time. I think I've seen HP, ASUS, Dell, and Apple stuff mostly.

u/lovesongsnhouseflies · 2 pointsr/makinghiphop

I've personally never used that interface, so you'll have to rely on the Amazon reviews (or hopefully someone here has had experience with it). The preamp (what you plug the mic into), and the mic you use, determines the sound you're going to get. Again, you're gonna have to read the reviews. You're just starting off, so I wouldn't stress it too much. You'll get a better sound than just plugging a USB mic into your computer.

If I were in your position, with a small budget, I'd save up a bit more and buy this:

http://www.amazon.com/Focusrite-Scarlett-Solo-Compact-Interface/dp/B00MTXU2DG/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1452061607&sr=1-1&keywords=scarlett+solo

The Scarlett series, in my opinion, is the best in terms of budget audio interfaces. Their preamps, and the system, overall, is of great quality.


When you're ready for that mic - put enough together to buy sayyyy this:

http://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1452061954&sr=1-1&keywords=Audio+Technica+AT2020

...and you got a good little startup.



The mic stand should fit pretty much any mic. It has both the clip, and a part to screw in the mic's shock mount (look up "shock mount").


I always recommend that you get warranty with your equipment, cause, you know...shit happens, so you should check if there're any music stores around that sell whatever you're interested in, and offer the warranty, as well.

u/FalseProof · 2 pointsr/letsplay

Off the top of my head:

Dynamics

Shure SM58 (go for the one without on/off switch)

Shure SM57 (ONLY DO THIS IF YOU KNOW MIC PLACEMENT AND HAVE A POP FILTER OR WIND SCREEN; SM58 is better for voice but SM57's are a bit cheaper)

Shure SM7B

Electrovoice RE27

Sennheiser MD421

Sennheiser MD441

Condensers

Audio-Technica AT2020

Audio-Technica AT4050

Audio-Technica AT4040

Everything else is $500+. This is mostly a low-end choice selection to buying XLR microphones.

u/RedMoth11 · 2 pointsr/pcmasterrace

none of them need mic capability.
just plugging the mic in to the mic jack on the computer is fine.
unless you have a nice mic, which you would get a usb interface for.
the audio thru a mic input, is more based on the mic quality rather than the sound card quality.
usb interface: scarlet solo + mic: at2020 or usb mic at2500usb

u/Entity411 · 2 pointsr/podcasts

On one show, GACC, we record with AT2020 USB mics fed into a USB hub and haven't experienced any problems directly with the mics, though the hub is getting temperamental having to feed so much power out.
https://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK
On my other show, WWTQ, we use MXL 990 XLR mics fed into a mixer that USBs into a computer.
https://www.amazon.com/MXL-990-Condenser-Microphone-Shockmount/dp/B0002GIRP2/

In both cases the audio is comparably similar and easy enough to edit via Audacity or whatever software of choice, we use on-mic pop filters rather than those that clip to the stands, which will show up on audio if bumped or moved or adjusted during recording.

That said, streamers the world over are using mid-range headsets to great effect with little issues, and there are lapel mics that aren't as cumbersome, but carry different problems with their usage, but both are cheaper-to-same cost as a XLR/stand/mixer/usb setup

u/Riposte_This · 2 pointsr/Twitch

at2020 and a Behringer 502 USb mixer.

As for the shock mount and mic stand. The AT2020 XLR comes with a mount that will screw on to any 5/8th mic stand thread. If you really want to go with a shock mount, than I ordered the Neewer shock mount, it was like 8 bucks, thing works great and fits the AT2020 perfectly.

Here are a couple links
http://www.amazon.ca/Technica-AT2020-Cardiod-Condensor-XLRM-type/dp/B0006H92QK/ref=sr_1_2?ie=UTF8&qid=1420340421&sr=8-2&keywords=at2020

http://www.amazon.ca/Behringer-Q502USB-Premium-5-Input-2-Bus/dp/B008O516JW/ref=sr_1_1?ie=UTF8&qid=1420340440&sr=8-1&keywords=behringer+502+usb

http://www.amazon.ca/NEEWER%C2%AE-Black-Universal-Microphone-Bearable/dp/B00C86FA0E/ref=sr_1_1?ie=UTF8&qid=1420340455&sr=8-1&keywords=neewer+shock

http://www.amazon.ca/gp/product/B000978D58?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00

You will also need an XLR cable, look for one with Neutrik connectors. I'm not sure how many of those ship to Aussie, but that is my setup and I love it.

u/Veritas413 · 2 pointsr/techsupport

Nope, USB works in the machine/peripheral model. When you plug a mouse (peripheral) in to your computer, your computer (machine) loads the appropriate drivers and enables the functions of the mouse. A good giveaway of what role a device plays is the plug on it. A USB-A (the rectangle) is usually on the master end, while the slave end uses various other connections (USB-B, Mini-A, Mini-B, Micro-A, Micro-B, proprietary). So on the bottom of your mic, you have a USB-B connector. So the mic is a peripheral. The DAC box you're looking at is ALSO a peripheral device.

SOME USB microphones come with adapters that would allow you to do this, but it's a nonstandard implementation of USB, so if your mic didn't come with one, it won't work, even if you found a cable with the right ends on it.
A quick perusal of the owner manual pretty much confirms that. They don't mention any analog outputs, and AudioTechnica makes a standard AT2020 without the USB, which tells me that it's not possible.

If you need an analog output, you're going to have to run it IN the USB of a computer, then OUT through a Line Out or Speaker jack, and in to whatever you need the analog on.

If you give us some more information on what you're trying to accomplish, not just the plugs you need, we might be able to come up with a solution.

u/FiveCentPrincess · 2 pointsr/buildapcsales

Audio Technica AT2020 currently $99. There are both regular and USB models.

For those who don't mind USB, there is also the ATR2500 for $66.

u/Warlizard · 2 pointsr/pcmasterrace

This is my microphone, if you care, with the boom and cradle, of course. The webcam is the Webcam Pro 9000 (I just looked it up -- why the fuck do I have a $200 webcam?), and I also have the X-530 speakers. They're fine, tbh. I keep thinking I'll upgrade them but there's just no point.

Anyway, does that answer your question as to my pcmasterrace street cred?

Oh, and I used to own computer stores but sold them back in 2012. So I have been in IT since the 90's.

u/Enzo9292 · 2 pointsr/pcmasterrace

Hey mate, thank you for the quick reply, Final follow up just to make sure everything is in order

The Audio interface you suggested would be This One Correct?

Along with This and This Would be the perfect combinition and everything would work well correct?

I will take into consideration your suggestion on Pop filter, as im pretty clueless as to what a good pop filter is lol


u/_Gingy · 2 pointsr/buildapc

Keyboard: Tomoko Blue Switch Needed a keyboard for when I used a laptop when its keyboard was failing. Went with a cheap mechanical. My short review of keyboard

Mouse: SteelSeries Sensei Swapping out for a Zowie FK1 on Monday (Sensei has disconnect issues after 4 years of use)

Headset: Siberia 350 Originally had a Siberia V2 I got for $50 @ Walmart due to box damage. RMA'd once for a V2 with the soundcard. Audio died in one ear on RMA after a year so RMA'd again and was given the newer Siberia Prism v3. Sound died in one ear after a short drop. Was given $150 in store credit to get the Siberia 350 + Mousepad.

Mousepad: QcK+

Monitor: Acer KG240. Purchased from Microcenter for $150 on sale.


2nd Monitor: Samsung 32" 1080p TV mounted on wall with this wallmount. Bought the TV a few years ago ~2012

Other: Snagged a Razer Tartarus a couple years ago for really cheap. thought I'd use it but never got around to trying it.

-----

On peripherals that I'd like to upgrade would be Headphones/Mic first. I've always had my eyes on Beyerdynamic DT990 with a DAC/AMP + an AT2020

u/kuraimusic · 2 pointsr/trapproduction

Do you mean your room is already treated or sound treating isn't a priority at the moment? If it isn't treated I'd make sure to get a good set of headphones to reference on, then use monitors when you're producing with friends or don't feel like wearing headphones.

headphones: audio technical mt50x $150

or audio techinca mt40x $100

monitors: Krk Rokit 5 or 6s or Yamaha Hs 5 or 7s
keep a look out for these on craigslist and eBay, you can find some good deals out there. Yamahas are going to be better quality, but you can find good deals easier on KRK and they'll get the job done

audio interface: Scarlett 2i2 $150~

if you're looking to record vocals then I'd get something like this for a mic
at2020. you'll want to get the package with the pop filter and the cables

You're going to want to get a power surge protector to keep your monitors and equipment safe. Also just a heads up, but Black Friday is just around the corner, so if you can hold out on certain items you'll be able to grab some of these items for a fraction of the price.

u/j_squares · 2 pointsr/audioengineering

My friend and I are starting up a podcast, and are working to get a list of things we need. After being musicians (and watching numerous YouTube videos), we’ve accumulated some 2 condenser mics (specifically: Audio Technica AT2020’s) , and a Shure SM27. After demoing some tracks, thinking our Focusrite Scarlett 18i20 interface would have preamps built in, but the signal was quiet, even after mic check and speaking directly into it. My question is: do we need an external preamp? If so, what price range should we look at to avoid upgrading, yet not blowing out our banks?

We’ve had our eye on the ARTTube Opto8 for some time now, but I’ve recently seen people dumping these on Reverb, saying that they’ve upgraded.

u/Shake_Oh · 2 pointsr/microphones

Yeti is sensitive and you can do a lot better at the price point.


Dynamic Microphones



For most gamers I'd recommend dynamic microphones since they pick up a lot less noise. Look into: XM8500, SM58, Beta 58.


Condenser Microphones



If you are set on a condenser microphone, be aware everyone is going to hear your keyboard, mouse, roommates etc. Avoid the Yeti. Look into: AT2020, MXL 770, Samson C02, LyxPro SDPC-2.


Mixers for Single Microphones



With any of the single microphones you'll be able to use the Xenyx 502, 1 RCA to 3.5 cable and 1 XLR cable.


Mixers for Microphone Pairs



With either of the stereo microphone pairs you'll need to use a mixer with more inputs OR go halves with a friend. You'd be able to use the Xenyx 802, 1 RCA to 3.5 cable and 2 XLR Cables, you are also going to want a stereo microphone bar


Accessories



Scissor Arm - $20 : You'll want a stand with any of the microphones listed, however if you'd prefer a stage style boom arm it would be the same price.


Pop Filter - $7 : You'll want one with any of the condenser microphones. However it would be a nice addition to any of the microphones.


Windscreen - $3 : You'll want one with any of the dynamic microphones.


--EDIT-- Let me know any questions you have. If you want to talk we could meet up on the discord server or something.

u/attilagyongyosi · 2 pointsr/podcasts

Just my 2 cents:

Regarding equipment you would definitely need a nice microphone to record with.



The Rhode NT1-A is an excellent one, and the package on this link contains all kinds of accessories you would need: a shock mount, cables, pop filter, etc.
For a bit cheaper, you could have the Audio Technica AT2020, this is what I use. You can record pretty decent things with this beauty.
There are others of course.



For the microphone to work, you need a pre-amplifier. Lot of people keep trashing Behringer products but I find their MIC800 is a fine choice at the lower price range.

u/blackjakals · 2 pointsr/audio

That might work out better than what you have, but if you really want quality audio, you need to invest a little more into it. Getting a proper condensor mic like the Audio Technical AT2020 here would be a great place to start. You would then probably need an audio interface to connect it to like this or a mixer like this. Do your research and a lot of it. There are a lot of good options out there to improve your audio quality, but all options involve investing a descent amount of money as hard as that is to hear. Research, find what you really want no matter the price, and save, save, save until you have it.

u/Crymoricus · 2 pointsr/audiodrama

This - $58.99

This - $99.00

This - the one with the stand ($48.00)

and This - $12.50

Total: $218.49

The "soundproof shield" on the mic stand isn't enough. The only reason I say you should get it is because it will allow you to hang a blanket over your mic. You want something heavy with a cotton-like, or very dense surface. You can hang the blanket there and "duck in" to do your voice work. You can take a phone in with your lines on it so you don't have to duck in and out so much. The point is that there is no such thing as a good mic that doesn't need soundproofing, period.

With this condenser mic, good soundproofing (blanket), and the heavy pop filter, you will be surprised at the quality. The Behringer audio interface is basically an amp, you know, and it's totally fine for voice work. And remember, this is NOT a USB mic! It NEEDS an audio interface.

I realize it's more than the option already presented, but it's just so worth it. It really is so much about that blanket. The fact is if you want to sound pro without spending pro money, you need to stick your head in there and just put up with that. The results are 100% worth it.

One other thing: if you find that pop filter isn't enough, and you're still hearing "mouth clicks" (this setup, without filter, will pick up every little sound the inside of your mouth makes -- and the inside of your mouth actually makes a LOT of unintended noise, if you didn't know it), start layering on thin nylon fabric (panty hose will work) until it's gone to your satisfaction.

Here's me using this exact setup (I have tried other inexpensive setups!)

https://soundcloud.com/dan-williams-214914755/credits-1/s-881qi?in=dan-williams-214914755/sets/a-house-in-wayward-canyon/s-cfvoq

u/DildoGaggins98 · 2 pointsr/makinghiphop

Thanks a ton bro! When I was making the beat I was wondering wether the drums were to punchy and I guess now I know! Yeah I'm using a 10 pound mic at the moment lmao so thats what that is. Im thinking of picking up this mic probably on my next pay day. I was simply going for flow cos the whole thing was completely off my dome in one take. I'm an out an out producer so im trying to practice rapping at the moment lol.

Imma be honest, when I started listening to your track I was like wtf is this but that flow is kinda hypnotizing. I guess your influenced by MF DOOM? Cos the way you were rhyming on that was insane. Did you punch in each 4 bar? Cos it sounded like you never stopped for air lmao. Really dope shit. Only criticism would be your accent seems to change throughout and I cant grasp where your from lmao, and it sounds like your recording it in a hallway but if thats what your going for thats fair enough!

Keep it up dude, hmu if you want any beats. I make allot of soulful ones to if thats what you like.

u/DangerKitty001 · 2 pointsr/letsplay

As /u/dan958 already stated, you should try recording into separate software. I would recommend experimenting with Audacity. It's free, and the recording quality is solid enough. A USB mic is a solid way to go if you plan to record separately. Other than USB, your option is basically XLR mics, which are good, but you either need a mixer to go with it, or you'll have to get an adapter to 3.5mm. A cheap but kickass XLR mic is the Audio Technica AT2020.

Hope that helps!

u/NorthernAvo · 2 pointsr/songamonth
  1. You need a DAW (which it sounds like you have) If you want some options, these are great: Logic, Studio One, Cubase, Pro Tools, Audacity, to name a few.
  2. You need an audio interface (like this)
  3. You've gotta get yourself a mic, nothing too crazy. The Audio Technica A2020 is great bang for the buck.
  4. Toughest part now is to organize yourself and your ideas so as to approach recording the song as neatly as you can. Layer portions of the song over one another until it's coming together nicely. Toughest part is to make sure you're able to piece together the "jigsaw puzzle".
  5. Patience. Lots of it.

    At the end of the day, everyone's got a unique approach to tackling the composition of a new song. Don't stress too hard over it, because chances are that since this will be your first recording ever, the mix will sound pretty rough. Mixing is a whole other animal on its own. But for now, just focus on the song itself and once you feel more comfortable, look up some how-to's on "intro to mixing" and begin your journey.

    I'd also like to add that /r/WeAreTheMusicMakers is a great sub!
u/OhNoItsGodzirrah · 2 pointsr/funhaus

It's only for cardioid microphones. Cardioid microphones have a pickup pattern (the shape of the area around the mic that it will successfully pickup sound) that looks like a cardioid (a mathematical term for a certain shape). So here's the pickup pattern for the microphone I know has been mentioned as being used by Rooster Teeth, the Audio Technica AT2020. Imagine that the center point of that circle is the microphone and you're looking straight down at the top of it. The front of the microphone is at 0° and the back is at 180°. That shape shown in the picture is the shape of the area the microphone will effectively pickup sound from. Notice that anything from 120° to 240° is basically not heard. That's the side of the microphone you point towards the speakers. I should also mention that some higher end microphones do have the ability to switch their pickup pattern for omnidirectional, cardioid, and figure-eight pickup.

u/PriceKnight · 2 pointsr/bapcsalescanada

Price History


u/ilrasso · 2 pointsr/WeAreTheMusicMakers

This mic, the Audio-Technica-AT2020 99$. This Interface, umc404hd. 99$. Reaper. Free or 60$. Some headphones/monitors.

not too crazy about the whole rap thing, but it's a hobby i put about 30 hours a week into.

What do you mean by that?

u/Shadowdust1 · 2 pointsr/pcmasterrace

You could get an AT2020 and a cheap 48V phantom power converter. Or an AT2035 and a cheap 48V phantom power converter.

u/Triksterism · 1 pointr/Twitch
u/Bass27 · 1 pointr/WeAreTheMusicMakers

At2020 is good starting mic for vocals as well.

Overall though in most not all cases you are looking for a condenser microphone with a cardioid polar pattern.

You will also want to look at a Pop filter and some sort of microphone stand.

Pop Filters help break up the sound of your S and P sounds so they sound less harsh.

Mic stands are needed to hold your microphone up. Starting out you do not need a real expensive mic stand get something with 3 legs that are reasonably tall.

If you want some more ideas I recently wrote a blog article about microphones over here

P.S try out Fruity loops before you commit to it Garageband is not that bad getting started. That and maybe try out some other software most will have some sort of demo.

Hope that helps!

u/OptionalSauce · 1 pointr/TheCreatures

For the tech-savvy that are interested, the microphones they use for CreatureTopia and Creature Talk (as well as the microphones that Dan ans Spencer use for their personal channels) are Audio Technica AT2020's.

u/ungratefulanimal · 1 pointr/audiophile

Is this a good mic for singing? Audio Technica AT2020.

My sister is wanting to sing and we were wondering what goes with this as well? Or should we go with a Rode mic for singing with one of those fluffy covers? All help is appreciated, this is new uncharted territories for us.

https://www.amazon.ca/gp/aw/d/B0006H92QK/ref=mp_s_a_1_2?ie=UTF8&qid=1483110003&sr=1-2&pi=AC_SX236_SY340_FMwebp_QL65&keywords=rode+nt1a+mic&dpPl=1&dpID=41ru5HJReeL&ref=plSrch

u/Splinxes · 1 pointr/Twitch

I used a Audio-Technica AT2020 for a year before I upgraded. Honestly its a great microphone.
I paired it with a newer microphone stand which is like 15 bucks and also a pop filter. I was very happy with the results.

Mic: http://www.amazon.com/gp/product/B0006H92QK

Arm: http://www.amazon.com/gp/product/B00DW3ZT76

Pop Filter: http://www.amazon.com/gp/product/B00946ZJN4

u/xStigga007x · 1 pointr/VoiceActing

Don't have any experience with either of the mics you mentioned.

However, I do have the AT2020 and can definitely vouch for it.

With the AT2020, I bought a mic arm that brought its own mic (Neewer NW-700). When I first listened to the raw input of the NW700 I didn't really notice much of a difference. However, most recently I actually put them to the test.

Check out the difference for yourself.

AT2020 is an XLR condenser mic that requires a DAC for power and to be connected to a PC. There is also a USB version of the AT2020.

u/beardedmanstudios · 1 pointr/Twitch

As far as a mic. You have a lot of options. You can go with a USB connection. Which is a reasonable option with good quality in products like Blue Yeti or going with a much better studio quality mic like MXL or even Audio-Technica however going with the studio mica I have listed you will need an audio interface. Like the scarlet or Yamaha

u/randomassaultpodcast · 1 pointr/podcasts

Yeah I might be a little better at answering this one Kate lol

Matt here, yeah I just bought this http://amzn.to/1QKzFBd and http://amzn.to/1QKzF4p and haven't had any time to sit down and learn how to effectively use them with Google Hangouts, my plan is to have a bunch of wires everywhere linking a guest google hangouts through the mixer and have our google hangouts through the mixer and somehow output separate audio tracks...I don't even really know if that's possible yet

Otherwise yeah, I record my own audio track in Sony and mix everything/everyone else in Sony; I don't put music under the podcast anymore, I do use music in the breaks though

So despite all that I'm still using my yeti http://amzn.to/1P2n5rC

u/-FLuX- · 1 pointr/AVexchange
u/NewWestMediaCo · 1 pointr/podcasts

Currently using the Audio-Technica AT2020 and couldn't be happier

u/MF_Patrick · 1 pointr/letsplay

This and this and you have a really good microphone setup and it's not a lot more expensive than the sound card you want to get.


All you need to add to this is a cheap stand and you are fine.

u/spokkeh · 1 pointr/audio

Something like the Blue Yeti may suit. It's a multi-pattern USB microphone. If your mixer is worth its salt, you should be able to output from your computer via an audio interface or simply use a line out to a separate channel.

I personally use the Audio Technica AT-2020 XLR version (this also has a USB version) for recording a bit of vocal work, including rap and some spoken word stuff. It works great on voice and acoustic guitars. However that doesn't solve the lack of phantom power. If it picks up too much ambience (which it definitely can) ease off on the gain a bit and speak louder.

A dynamic mic like this Nady may work as well, however this type can be quite sensitive and will pick up ambient noise.

I don't know if your budget stretches this high ($430), but the Electro Voice RE20 is in my opinion the gold standard for spoken word and radio type stuff that isn't a condenser microphone. It's dynamic, so it doesn't require phantom power, it has a cardioid pattern which will help filter out ambient noise and it just sounds fantastic to my ears. Even though it is quite pricey, it will stand the test of time and providing you take care of it, it will hold its value.

TL;DR: No phantom power requirement, not too sensitive, inexpensive. Pick two.

(Just realised the Shure SM58 might also fit the bill, but it won't give you that sexy radio voice. However, you can abuse the hell out of those things and they will still work and ask for more.)

Hope I've been helpful.

u/HUP · 1 pointr/audioengineering

I used to have the mxl 990, and it's all right for a beginners mic. Don't know about the 991. That monoprice looks like it has a lot of features for $80. Having said that, if I were you I would try these: Audio Technica at2020 with either the monoprice or this. I have the art pre and it works very well. I used to have a pair of 2020s, and they were great at that price.


EDIT: should add that use asio4all with any interface you get.

u/MrGeary08 · 1 pointr/audioengineering

So I use an audio interface to connect my XLR microphone to my computer and have done so for a long while with no problems. I had stopped recording stuff for a bit and when I tried to come back and record something again neither of my two recording programs will detect my mic. I've been trying to figure out the problem for a week or so now and cant get it to work.

I usually use Audacity but now when I try to record something I get an error message that says "Error opening sound device, Try changing the audio host, recording device and the project sample rate". The recording device is set to my USB audio codec that its always used.

I also use the Elgato recording software to record live commentaries but when I click the record button it just turns off again instantly with no message.

I know the mic works because I can turn on the direct monitor button on and hear myself or also through the microphone properties by ticking the "Listen to this device" box.

https://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK/ref=sr_1_2?ie=UTF8&qid=1527106164&sr=8-2&keywords=at2020

This is my microphone

https://www.amazon.com/Behringer-UM2-BEHRINGER-U-PHORIA/dp/B00EK1OTZC/ref=sr_1_2?ie=UTF8&qid=1527106892&sr=8-2&keywords=behringer+u-phoria+um2

This is my interface

Anyone have an idea as to what the problem is? If you need any more info id be happy to reply

u/JimmyHopkins47 · 1 pointr/buildapc

INCOMING LINKS!

I hear this AT2020 USB mic is good, but this one with AT2035 with the XLR input is probably better, but it also means you need an interface, such as a Line 6 UX2, Focusrite Scarlett 2i2, or any of their "lesser versions" (Line 6 Ux1, Focusrite Scarlett Solo). I personally have a UX2 and a Samson C01, which works fine for me. Search YouTube videos for demos and comparisons with the USB and XLR counterparts.

Keep in mind, these microphones probably need a mic stand.

u/Mclitness · 1 pointr/battlestations

Which one is it ? Audio Technica AT2020USB Plus Cardioid Large Diaphragm Condenser USB Mic https://www.amazon.com/dp/B00B5ZX9FM/ref=cm_sw_r_cp_api_i_7ObVCb1PH73BK

Or Audio-Technica AT2020 Cardioid Condenser Studio XLR Microphone, Black https://www.amazon.com/dp/B0006H92QK/ref=cm_sw_r_cp_api_i_rPbVCbW0EFMGE

u/Tarvould · 1 pointr/letsplay

We personally use 4 AT2020 and an MGXU Mixer:

https://www.amazon.ca/Technica-AT2020-Cardiod-Condensor-XLRM-type/dp/B0006H92QK/ref=sr_1_1?keywords=at2020&qid=1554514257&s=gateway&sr=8-1

https://www.amazon.ca/Yamaha-MG10XU-10-Input-Stereo-Mixer/dp/B00IBIVL42/ref=sr_1_1?keywords=mg10xu+mixer&qid=1554514302&s=gateway&sr=8-1

As long as you're all facing the same way (NOT even slightly towards each other or you get bad echo) this turns out great.

We even ended up getting a second mixer so we could use the EQ on all four mics. Have a nice carpetted/padded room, and again make sure you're all facing the same direction, a very important lesson we learned. Audio syncing the video is also very much needed in this case.

We record with VERY low gain so there's little noise pollution, then up in post.

u/fatlarry143 · 1 pointr/youtubers

I have a Canon Vixia which has a mic input

This Preamp

This microphone

u/maxzilla · 1 pointr/audioengineering

Keep in mind that much goes into that "nice rich radio sound." Broadcast microphones, preamplifiers, etc. are expensive. On that note, I think it would be tough to beat the price/performance ratio that the yeti yields.

You can get nearer to the sound you're after by reading into and experimenting with eq and compression, which can be altered in some video editing software and all audio editing software. There are many examples of the yeti in use, with varying results, likely afforded by different eq and compression use. I have a couple of yetis at work and they can be made to sound good.

Another mic in this category that's worth a look is the Audio Technica AT202.

With these two microphones, your onboard sound card is not used to take in the microphone signal (these particular mics take care of that). So your onboard sound card will have no impact on sound recorded using these microphones. If you use one of these usb mics, there's virtually no need to upgrade your sound card. You might want to, however, if you become more serious about recording music (sound coming out of your speakers would be better and cleaner).

I hope that helps some.

u/superembreeo · 1 pointr/WeAreTheMusicMakers
  • Focusrite Scarlett 2i2 is a good start. $150.
  • Audio Technica AT2020 $100ish
  • Ultimate Telescoping Boom Stand $35ish. Stay away from cheap stands, like "On Stage Sound."
  • Shure SM57 $100
  • Mogami 25' Cable $30 x 2 = $60

    Grand TOTAL - $445

    I know you don't NEED two microphones, but, judging by the variety of instruments your man plays, he'll want the options of a condenser AND a dynamic. The AT2020 and SM57, I feel, is a better bang for your buck than the single Blue Spark. That said, Nine Cats has been generous with good advice.

    Best of luck to you and your BF!
u/nakriker · 1 pointr/Songwriting

What's your budget?

Yeah, get a decent mic, and an audio interface (so you're not limited to USB mics or using you laptops crappy 1/8" input.

If you want to go super cheap, this interface doesn't suck.
https://www.amazon.com/Behringer-U-PHORIA-UM2-BEHRINGER/dp/B00EK1OTZC/ref=sr_1_1?ie=UTF8&qid=1478820786&sr=8-1&keywords=uphoria+um2

and neither does this mic
https://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK/ref=sr_1_1?ie=UTF8&qid=1478820827&sr=8-1&keywords=at2020

That combo is only $136 and will do wonders for your recordings. If you have a bigger budget, you can do better all the way around.

u/joycamp · 1 pointr/WeAreTheMusicMakers

Dude - you already have a mac. Garageband is like $5.00.

Get it and an audio interface ( https://www.amazon.com/dp/B00QY4RLRQ/ref=cm_sw_r_cp_tai_WtwnybZ6Y0HCB)

A mic (Audio-Technica AT2020 Cardioid Condenser Studio Microphone https://www.amazon.com/dp/B0006H92QK/ref=cm_sw_r_cp_tai_3uwnyb81ZSKAZ)

-nd a cheapo controller (Novation Launchkey 25, 25-key USB/iOS MIDI Keyboard Controller with Synth-weighted Keys https://www.amazon.com/dp/B00B9QOMCG/ref=cm_sw_r_cp_tai_5vwnybW8TMXD0)

With this setup you can really get started right.

u/RevEnFuego · 1 pointr/podcasts

I've used an Ars Technica AT2020 and its all right. USB mics are occasionally tinny and I don't always like em.

u/hinosaki · 1 pointr/buildapcsales

Depends on what you're using the mic for. Assuming you're using it for streaming/PC gaming, you can look into dynamic microphones because they don't pickup as much background noise as condenser mics.

Generally, most dynamic mics are XLR which need some sort of pre-amp. A popular budget pre-amp is the Behringer UM22, and a fairly popular XLR dynamic mic is a Shure SM58.

My setup is overkill for general PC gaming, but I use an Audio Technica AT2020, which is a condenser mic, connected to a UM22. It doesn't pickup much keyboard noise thanks to my MX brown switches, but if I press hard enough, it'll get picked up (albeit slightly). I usually use push-to-talk anyways so it's not a problem.

I got a pretty good deal on /r/hardwareswap for my UM22+AT2020 for ~$100 a while ago, otherwise I would've purchased a dynamic mic.

YMMV though! My friend isn't an audiophile nor professional streamer so his setup may not be optimal for reducing keyboard noises. I've heard of plenty of people using Blue Yetis and were with their purchase.

u/sch3p3rs · 1 pointr/rap

That's not bad at all for starters. The one thing I would suggest would just be possibly cranking the beat to a little higher volume over your lyrics. Other than that as far as quality goes, the Blue Snowball isn't exactly a 10/10 mic. If (and only if) you have some money to throw at rapping, a Blue Yeti or AT2020 will make a big change if you're worried about the sound quality.

Just keep getting after it, and you'll eventually see improvements just as in everything else in life. Believe in yourself man! good luck!

u/Deathbycoleslaw · 1 pointr/techsupport

YES! I'm so glad you thought of that, oh my GOD my friend typing is awful hahaha.

Yes that is a serious issue. Now, with a "noise gate" program, you can set your mic to just only pic up sound at a certain decibel level. Skype has a setting like this, but this would be for all mic programs such as in-game voice or recording programs or twitch streaming. There are several of these out there for free.

http://www.amazon.com/Blue-Microphones-Yeti-USB-Microphone/dp/B002VA464S

There is another one that seems to have slightly better sound quality called the Blue Yeti Pro but it's 100 extra dollars. It also has an XLR output, but you won't need that for standard computer usage. In my opinion the quality gained is not worth 100 dollars extra. There's also this mic:

http://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1453874728&sr=1-1&keywords=audio+technica+at2020

all places / reviews will tell you these two are comparable. I have no idea the differences other than this mic has no settings on it to change. It's Cardioid pattern pick up ONLY, but that's PROBABLY the setting you'll use on the Yeti anyway. The yeti has bi-directional, omnidirectional, cardioid, and some other shit I never use. It's nice to have the option, but I stick to cardioid. This is just how the mic decides what direction to record from.

u/5FDeathPunch · 1 pointr/pcmasterrace

AT2020 or Blue Yeti, both great quality mics for about $100.

u/onewordgo · 1 pointr/podcasts

There's a ton of great advice here already, but here's something I wish somebody told me at the beginning: Don't start with a USB mic. Get a Mixer and an XLR mic. I can't tell you how much I wish I'd have gone with this setup at the beginning, to allow for expansion in the future. Even just a little Behringer XENYX Q802 USB for myself and a potential guest, and an Audio Technica AT2020 XLR would have been an amazing way to kick things off. It's also crucial to include a pop filter and XLR cable, so this AT2020 bundle with the mic, pop filter, and cable all included, is a great deal. This is a much more solid investment, and as I said, I wish somebody told me this when I started.
Edit:
Even better, there's this AT2035 bundle. The AT2020 and AT2035 mics are very similar in quality, but the AT2035 comes with a shock mount, which is a great addition to any setup, in order to avoid all those little bump and vibration noises.

u/WonDahMan · 1 pointr/buildapc

If you're spending less than $40-50 on a mic for recording (im guessing for youtube?) then you might want to invest in a better mic setup. You can get something like an Audio Technica AT2020 XLR Microphone and a USB Audio DAC to plug it into, with a Mic Stand to hold it, it's very expensive but it will 100% fix your problem. This is what most professional youtubers use.

You could try the Asus xonar Card i mentioned, i've heard good reviews on it but i'm not certain it will fix your problem.

u/Du6e · 1 pointr/buildapc

Pretty solid build. If you don't really have a set budget, you could up your audio game by getting something like a Sennheiser HD598 / AT2020 (or another similar XLR condenser microphone) and a Scarlett Solo for roughly $330.

Note if you go with something like this, you need to get a mic stand / pop filter.

u/Walnut_Uprising · 1 pointr/audioengineering

Copy/paste of a budget setup I've been putting together lately:

  • 1 x Pile Pro PDMIC78 for snare
  • 1 x CAD KBM412 for kick
  • 2 LDCM's for overheads, AT 2020 is a classic, but you can certainly go cheaper with some no-name condensers.
  • Behringer UMC404HD for an interface. It has 4 mic preamps, which will work much better for drums than the 2-in AudioBox or the Scarlet 2i4 that always comes up on these threads.
  • 4 x mic cables
  • 1 x low profile boom stand for the kick mic
  • 1 x mic clip for the snare mic
  • 2 x Boom stands for overheads
  • Download Reaper, use the free trial

    I think all told that runs you about $400, but you can use that to set up a solid Glyn Johns set up. If you want to multitrack the rest of a band, the Pyle will work well on guitar cabs, you can DI the bass and use the kick mic on the cab, and condenser mics will do pretty much anything else. I have a better setup for doing final takes, but this is more or less my current setup for demos.

    Also, if you're really strapped for cash, you can start with just the interface and one condenser mic, although it won't be great. From there, get the kick and snare mics, then a second OH when you have the money.
u/KawaiiCub · 1 pointr/Twitch

> Why are video games important to you? What's your favorite video game memory?

Getting lost in a fantasy that we cannot normally experience is an amazing feeling when the game is made well. My favourite memory(s) is playing Final Fantasy 9 for the first time, it's one of my favourite games of all time, I fell in love with the storyline and the characters and it's the game that made me want to pursue a career in game design.

> What's your favorite snack?

Not really a snack, because I'd be so fat if I ate these all the time, but Lindt Chocolate balls are so damn tasty...

> What are you asking Santa for this Christmas?

A pretty decent mic, currently looking into this one.

> If you were a pizza topping, what topping would you be?

A pepperoni, or maybe some smoked chicken. Mmm...

> What's your biggest goal in life?

To become a fairly decent streamer with a good enough following who come back time and time again for my personality, not just the gameplay. (I'll get there one day! :D)

> Where are you from?

England, UK.

u/InSoManyWordsProd · 1 pointr/letsplay

I mean I mainly wanted you to watch that so you could an idea of how things work and the differences between things. That video is not universal in its recommendations given that it's specifically for voice actors, a use case that requires much higher fidelity than what you're doing. The advantage of USB over XLR is that they're cheaper, the only reason I'm avoiding recommending the blue yeti is I personally have never used three usb mics simultaneously on one computer and I could see that causing issues.

As for what I personally would recommend, the Audio Technica AT2020 is a very good starter mic, I own one myself. Note that it is XLR and does require phantom power so keep that in mind. As far as interfaces go, this Behringer U-Phoria UMC404HD came up and seems like it could work, has phantom power and 4 inputs anyway. I don't own it though, I've used Steinberg and Focusrite in the past so I can't give a personal recommendation on this model.

Feel free to do some more research on your own but those are good starting points. If you have other questions you can pm me or reply here.

Seeing your videos btw, if you want to avoid clipping I would also recommend not yelling into the microphone, y'all seem to be pretty constant volume, just going back and forth between yelling and talking so if you gain to the yelling you can just adjust the volume in post as pretty large chunks so it shouldn't be that bad.

----------------

This isn't solicited advice but you guys might wanna work on the language a bit, especially since you're associating what I assume are your real names with the project. I'm talking mainly the "gay" stuff. You can think of it as future proofing or a "dress for the job you want" kinda deal. Also, perhaps most importantly, it's just not cool to people.

u/SardonicPanda · 1 pointr/hardwareswap

That seems to be This one on amazon and I'm listing this one here. I
m honestly not too sure on the differences but it is a different model.

u/doggie_barko · 1 pointr/microphones

I'm thinking of buying this bundle for ~50$ with the purpose of Twitch streaming as I watched a comparison video between it and the AT2020USB.

I determined that the audio quality with the AT2020 on phantom power, while noticeably better, was not worth the price difference(50 vs ~100) with the Tonor on PP- considering I get the boom arm and more.

2 questions:

  1. With the bundle, do I need a mixer? Or after plugging the mic into the PP, do I wire the PP straight into my mobo?
  2. Is the AT2020 worth paying to 50$+ dollars in mic difference PLUS buying a PP and mixer?( I realize this question is preference/opinion)

    Thanks in advance /r/microphones

u/iDarisaur · 1 pointr/PCSound

Okay we have one of those, the trs port is where the mic is plugged?

And as for the mic it’s this one here i ‘m pretty sure

https://www.amazon.com/dp/B0006H92QK/ref=cm_sw_r_cp_api_i_ra9VDb7KK1326

u/BigPotato98 · 1 pointr/battlestations

Hey thanks for your comment, the mic is an Audio Technica AT2020.

It is actually ridiculously cheap right now compared to when i brought it a good 3-4 years ago! Its still a solid mic and has never let me!

Link - https://www.amazon.co.uk/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK

u/bamalama · 1 pointr/audioengineering

Affordable Condsnser Mics for Outdoor Bluegrass Gigs


I'm looking at buying two cheap condenser mics. I'm hoping for confirmation that, for our purposes, something cheap is adequate. Thanks for feedback.

Here's what I'm looking at, and some context.

MXL Mics 770 Cardioid Condenser Microphone - https://www.amazon.com/MXL-770-Cardioid-Condenser-Microphone/dp/B0007NQH98/ref=sr_1_4?keywords=condenser+microphone&qid=1571410670&sr=8-4

Audio-Technica AT 2020 Large Diaphragm Microphone - https://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK/ref=sr_1_4?keywords=audio-technica+at2050+large+diaphragm+microphone&qid=1571411187&sr=8-4

Our bluegrass band frequently plays at outdoor events like farmer's markets, festivals and such. We are mostly back-ground music, which is fine.

Sometimes we bring a large nice sound system, but I'm looking to round our our stealth (quick set-up and break-down) system. Our mixer has phantom power, BTW.

I want two because we frequently have up to six people, as well as walk-ons. It's always noisy. We are complete amatures, but want to project our amatureish attempts.

Thanks.

u/caseyfrazanimations · 1 pointr/youtube

Audio Technica at2020 mic is your friend here buddy, get it with the "bought together stuff" it's what I use, another youtuber bought it for me and it works like a charm (it also has a headphone jack).

https://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK

u/Thefatwizard · 1 pointr/letsplay

I love my AT2020. I haven't used Blue Yeti or Blue Snowball, so not sure how it compares to those. But the sound seems very clear!

u/RealPaceMKR · 1 pointr/edmproduction

I’ve found the AT2020 does a great job with vocals and instruments. But I’ve also seen plenty of people with the Yeti you’ve mentioned.

u/wisesascha · 1 pointr/gamingpc

Well it depends. if you get a stand tall enough to reach your face then the snowball is better because it will give better quality. But if you don't want to deal with having a large object close to your face then the antlion is a good choice. If you are looking for the best audio quality I would buy a xlr condenser microphone like this http://www.amazon.com/Audio-Technica-AT2020-Condenser-Microphone/dp/B0006H92QK and a good preamp.

u/Novux · 1 pointr/macsetups
u/relwow · 1 pointr/Twitch

I use an AT2020, with this boom arm and this windscreen - get them all for under €200 for sure :)

u/Haynews · 1 pointr/podcasting

I’m a syndicated talk radio producer by day, and podcaster every other time. I’ve been using AT2020 mics in podcasting for years now and have loved these little workhorses. Cost effective and great sound. They are condensers, so you have to take in to consideration what others have mentioned. That being said, love the sound i get from them.

At2020

u/MumrikDK · 1 pointr/pcgaming

This mount fixed to the right-side edge of my table: http://www.amazon.com/gp/product/B00AK7SKL4/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1


Holding this sucker (50 buck sale): http://www.amazon.com/gp/product/B0006H92QK/ref=ox_ya_os_product

With this guy http://www.amazon.com/gp/product/B0002GXF8Q/ref=ox_ya_os_product

It feeds into this guy (for phantom power) who already had been living on my table for years http://www.amazon.com/Behringer-UB802-BEHRINGER-EURORACK/dp/B0002JF5CM/ref=sr_1_2?ie=UTF8&qid=1417327657&sr=8-2&keywords=eurorack+602

and that goes into my line in.

Yes, it is silly overkill, but it is extremely comfortable to use (just pull in the mike) and I got tired of shitty mikes. Being Cardioid it works perfectly sitting next to my face rather than stuffed into my mouth, so eating and drinking is a non-issue. The stand means it takes pretty much no desk space. The mixer of course does, but that was already there. There's also a USB version of the 2020.

u/kechlion · 1 pointr/letsplay

> dbx 286s

So I see on there compressor and the gate setting, does it also have a limiter? My biggest problem is my laughter is usually headphone/ear destroying while my normal voice is on the quiet side. Or does the compressor hit from top and bottom?

Also, I was thinking of getting this mic to start out - https://www.amazon.com/Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK

Then I suppose if I get really into it I can get the crazy expensive Shure.

Is there any setup needed on the Scarlett Solo besides plugging it in? I saw some of those and they seemed pretty straightforward.

Also - thank you very much for the reply!

u/Monkey_Deee_Luffy · 1 pointr/pcmasterrace

You can get the AT2020's for $100, which are actually really good condenser microphones.

Like, they are really good, you can do voiceovers and studio stuff with them.

Edit: Here is a link.

https://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1501202632&sr=1-1&keywords=At2020

u/pepperama · 1 pointr/podcasting

I have the same pre-amp and it is a ripper. I went for a different audio-technica mic though which is this one: https://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK

u/wombocombo86 · 1 pointr/Guitar

nice thanks. i want to do both but probably more acoustic + classical guitar than electric. i think i will go for the interface + mic.

i just youtubed the two products in my description of other people testing it out with their guitars a few min ago and it seems alright but not very satisfying. i do want better quality audio than that.

so back to the interface + mic.

for mic: i think ill go for the AT2020 but i see two products on amazon. which one would be better?

http://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK/ref=sr_1_1?ie=UTF8&qid=1458572206&sr=8-1&keywords=AT2020

or

http://www.amazon.com/Audio-Technica-AT2020USB-PLUS-Condenser-Microphone/dp/B00B5ZX9FM/ref=sr_1_2?ie=UTF8&qid=1458572224&sr=8-2&keywords=AT2020

for interface: from focusrite or presonus, will i be able to find a good interface for unde 100$? if so, can you link me a good one for the best bang for my buck?

Thanks again

u/itsfutur · 1 pointr/pcmasterrace

Well, I'll tell you the Sennheiser headphones you listed have a larger Frequency response, a far greater frequency, and a great impedance. They're also lighter than the Audio Technica pair you listed. I'd highly recommend the Sennheiser pair if it's feasible to your budget.

As for mics, I'd go AT all the way. The AT2020 Cardioid is insanely good for the price.

Hopefully that helps . Feel free to PM me if you have any questions !

u/foe_to · 1 pointr/audioengineering

I hope I'm posting this in the right place.

I'm looking for a low-end solution for recording vocals, connected to a PC.

I have absolutely no experience whatsoever with audio hardware. My wife loves to sing - and though I am of course biased, I think she's pretty good at it - and so I want to get her a gift of some recording equipment.

I'm not looking for anything high-end; I'd like for it to be "decent", but it doesn't have to be professional level hardware. I'd like to be able to get everything for somewhere between $300-400 if possible. So, specifically, I'm looking for...

  1. A microphone for vocals (with a stand, or stand separate)

  2. A way to hook everything up to the PC (for use with something like FL Studio or Audacity)

    I assume there might need to be an amp in there somewhere? I don't know, I don't know anything about this stuff.

    Would anyone please be willing to give me some recommendations on parts, and what specifically I will need? Thank you.

    Edit: Okay, what about this?

    AT-2020 Mic

    Scarlett Solo USB Interface

    Mic Stand

    Pop Filter

    XLR Cable

    Seinnheser HD280 Headphones
u/verticaluzi · 1 pointr/makinghiphop

TL:DR Help me choose my first setup. Dynamic vs Condenser.

I’m looking for my first microphone, to start recording over free trap beats I find on the internet.

Both of these are in my price range. I’d like to point out that the Shure SM58 is a dynamic and the AT2020 is a condenser.

I’m struggling to decide because I’ve read that a condenser picks up more details which is good, however my bedroom isn’t sound treated. You can hear the very gentle buzzing of electrical appliances, the faint rumbling of the hot water pipes, and the wind against the side of the house.

I’ll be picking up the XLR versions, and will be buying either the Behringer UMC202HD or the Focusrite Scarlett Solo . If you have experience with either of these, feel free to comment.


u/dethandtaxes · 1 pointr/roosterteeth

> AT2020

http://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK

The mic is currently pretty cheap but you would need a mixing board to run it through as the microphones run off of XLR.

u/tab13092 · 1 pointr/edmproduction

As others have said, if you're on a budget snag an entry level interface (because down the line you might want to get monitors etc and you'll already be that much ahead)

As for mics, I'd recommend the Audio Technica AT2020. AT is a grand company, and this mic is generally your best bang for buck when it comes to quality entry/mid level mics.

I see right now on Amazon it's actually on sale as well;
https://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK/ref=sr_1_5?s=musical-instruments&ie=UTF8&qid=1540489162&sr=1-5&keywords=condenser%2Bmicrophone&dpID=41EvhVRUKzL&preST=_SY300_QL70_&dpSrc=srch&th=1

u/Mad_Economist · 1 pointr/CabaloftheBuildsmiths

> I have 2000 dollars maximum for my computer build. I don't have any play over that. That being said if I need an amplifier for my interface I am cool with buying that in the future when I can get the money for it. If you can fit it in that's great!

Hm. Well, not entirely sure you'll need it - sadly, interfaces provide almost no specs for their headphone outs, so it could be 5Vrms into 100 ohm or it could be .5Vrms. Guess the thing to do would be to listen, then determine if it's working properly for you and getting loud enough without distortion - if so, you're good. If not, amp time.

>The room is dedicated to this computer. And I'm getting the micke from ikea for a desk. I wouldn't exactly feel comfortable moding it to mount the mic. Perhaps a stand would better better for my needs?

Looks to me like the Micke would support a mic arm just fine without modding. Of course, you could also put it on your desk, but I've found that tends toward very loud keyboard noise.

So, with all the information you've given me, I think I've got a pitch for you:

For an interface: a [Focusrite Scarlett Solo] (http://www.amazon.com/Focusrite-Scarlett-Solo-Compact-Interface/dp/B00MTXU2DG) which will run you around $100 new (a bit harsh - I got a 2i2, which is the same or better in all regards for around the same), or $80 or less used (though I sadly don't see many used ones from respectable retailers at the moment, so you'd need to go eBay spelunking). It will accept an instrument line in for recording, allow live monitoring via the headphone out of all inputs, and has a mic input with phantom as a bonus.

For a headphone: [AKG K7XX] (https://www.massdrop.com/buy/akg-x-massdrop-k7xx-limited-edition-ruby-red), which is one of my favourite recommendations in moderately-priced headphones. The K7XX is a comfortable, detailed headphone with excellent positional audio, and an easy-to-like sound signature which slightly boosts the bass but without the ludicrous bass boosts of some "lifestyle" headphones. At $200, it's already compelling value, and you can find it used on Head-Fi, eBay, or /r/AVExchange for $170 or less typically. The wrinkle here is that the K7XX takes a fair bit of juice to drive, and I'm legitimately not sure the Solo has enough. It might, some interfaces surely do, but Focusrite publishes no specs here, so all you'd be able to do is listen and see for yourself.

For a mic: [Audio-Technica's AT2020] (http://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK) is a very clear, detailed mic for its price (which is around $80 new, less used) if you have the 48v phantom it craves (which, as a Solo owner, you would). It will pick up keyboard and room noise pretty easily, though, so you'll want to use push-to-talk with it for VOIP IMO, though a shock mount and positioning it well could also work, I suppose.

There's probably enough slack in the budget to fit additional gear if needed - particularly if you buy used - so if you need an arm to mount the mic (since you're a musician, you might see if you can get one from a friend for cheap/free first, though) or an amp for the K7XX, it can be provisioned for.

u/TravisShoemocker · 1 pointr/makinghiphop

There used to be a $60 Audiotechnica USB mic on Amazon, but it's not around any more. Seemed decent at the time, but looking back it wasn't a very good mic tbh. Once I bought an interface and moved up to the AT2020 my sound got 10x better. The difference between a $50 and $100 mic isn't that the $100 is two times better, it's more like five to ten times better. It's definitely worth saving, unless you know you're not going to do that. Moving to an audio interface and getting an XLR mic was the best move I ever made for getting better sounding vocals.

u/antdelvec · 1 pointr/podcasting

Thanks for everyone's input. I started to put together a list based on a combination of a lot of these RECOs. Let me know if you think I'm missing anything. I tried to stay around $1000 and have padded some of these line items, but let me know if you think I'm missing anything.

​

-Zoom H4 bundle: around $300 with xlr cables, 2 handheld mics and mic stands

-2 Audiotechnica mics (Cardioid Condenser): around $250

-2 Audiotechnica headphones: around $150

-Mounts and shocks: around $100

-additional accessories: around $100

​

Total Ballpark: $900

u/imuya · 1 pointr/GirlGamers

tbh, I would never even consider buying Astros. Steelseries is fine if you're just looking for a cheap low to mid end headset. I wouldnt seriously consider them if your budget is significantly higher than most of their offerings.

I would get something like AKG-702's, and then spend the extra 50-100 on a nice stand-alone microphone.

http://www.amazon.co.uk/AKG-K702-Open-Back-Reference-Headphones/dp/B001RCD2DW/ref=sr_1_1?ie=UTF8&qid=1416593912&sr=8-1&keywords=akg+701

Something like this;

http://www.amazon.co.uk/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK/ref=sr_1_1?ie=UTF8&qid=1416593702&sr=8-1&keywords=audio+technica+microphone

the Sennheiser PC 363D arent bad, I think Ohpond recently bought a pair of Sennheisers that have the same drivers. She might have an opinion on them.

u/ZettaTangent · 1 pointr/audiophile

Me and my brother play online games in the same room, and voice communication has always been an issue. We share a Blue Snowball right now but because it has to sit between us, it's too far to be anything but passable and using individual mics usually causes the echo of doom.

So I've been doing research and this is my plan.
I buy two Audio Technica AT2020 XLR Microphones with all the fixins' and I connect them both to the same audio interface and output to a single computer.

I do not have much experience doing anything like this, so my question is will this work? Will connecting these mics together prevent weird / disruptive echos?

u/happibeats · 1 pointr/makinghiphop

we're using a audio technica at2020 https://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK, Thanks though man, solid feedback, we recorded this in the closet with blankets and towels and a foam matress as "treatment" haha and have no backgound noise in there, so i didn't think a gate was neccessary but I'm basically teaching myself here haha like most of us.

u/brumkid100 · 1 pointr/microphones

Hello, Im looking for a microphone for gaming and talking to my friends but I also want to use it for signing as I use my room as a studio sometimes to for my sister.

My Issue is I found a microphone thats on offer in a bundle on amazon with a Focusrite Scarlett Solo (2nd Gen) & the mic is Audio-Technica AT2020 However there are reviews that its so good that when speaking and typing/playing games in calls it picks up every keystroke?. I can see this being a issue in calls hearing every keyboard click etc, I like a mute button aswell even if its external so i can quickly mute the mic when people come into my room, if there anything youd suggest? than

u/minusonethlaw · 1 pointr/audiophile

Grab an AT2020 and these guys

u/Destron1318 · 1 pointr/audiophile

Newbie here.

I picked up


https://www.amazon.com/gp/product/B0006H92QK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1


for my PC mic. I am aware that I need a 48V Phantom PS to use this. I'm looking at

https://www.amazon.com/InnoGear-Condenser-Microphone-Recording-Equipment/dp/B00KAPGLQC/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1473618498&sr=1-1&keywords=48v+phantom+power+supply


My question is do I just go with a XLR to USB converter from that power supply right into my PC? Or are there better options out there?

u/Xenethra · 1 pointr/letsplay

Neewer Mic Stand
$15 ish

https://www.amazon.com/dp/B00DY1F2CS/ref=cm_sw_r_other_apa_cu8Zxb1WCA7N5

AT2020 $88


https://www.amazon.com/dp/B0006H92QK/ref=cm_sw_r_other_apa_kv8ZxbDDA21QD

Scarlett Solo $100

https://www.amazon.com/dp/B01E6T56CM/ref=cm_sw_r_other_apa_3y8ZxbHHPDGMC

Hosa XLR cable $12


https://www.amazon.com/dp/B004TPDBGC/ref=cm_sw_r_other_apa_sC8ZxbZJZGRXD

This is almost identical to what I used for a while, besides us having a gen 1 2i2 instead of a gen 2 solo. You can upgrade the microphone down the line without upgrading the interface.

Whether or not you can get free shipping will probably impact shipping a lot, we have prime so I'm not sure how much shipping will cost.

I would recommend you to try the stuff out before buying audio equipment if possible. I feel like with this much money you shouldn't leave anything to a leap of faith, plus what mic suits my voice can be a lot different than what suits yours.

Edit: I forgot to mention: I hate the Neewer stand, but I can't possibly recommend the Rode PSA1 to someone with a 200-300 budget.

u/PotatoJo · 1 pointr/makinghiphop

https://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK

Quite cheaper than the USB version, don't let that fool you though.

u/EnglishTimelord · 1 pointr/pcmasterrace

For the electronics you could use the Fiio E10k which is a USB DAC/amp or the Creative E5 which is another USB DAC/amp but supports virtual surround.

For the headphones, HD598, K612. AD900x, A900x, K550, DT770 and DT770.

For the mic, something like this or this.

Thoughts?

u/NeonCircus · 1 pointr/youtube

Warning: the following maybe super wrong as I have no first hand experience with this brand.

From my experience buying a condenser microphone should cost upwards of £70 Maybe £60 if youre super lucky and somewhere has a massive stock clearance sale. Go to a music store (online) and look at their condenser microphones and you'll see what I mean. These microphones are £20. I have absolutely no idea how they are charging almost 1/4 of the standard 'low price tier' microphones.

Again while I have no experience with either of the microphones you listed- I would advice you to tread very carefully. I feel like this is one of those occasions where the extremely low price is a reflection of the quality of the product.

In addition Id add that - this is pretty much an 'entry level' microphone that Ive used for about 10 years. Far from the best or even studio quality.. https://www.amazon.co.uk/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK/ref=sr_1_2?ie=UTF8&qid=1469984857&sr=8-2&keywords=audio+technica+microphone .

u/lone0001 · 1 pointr/bapcsalescanada

Don't bother with this microphone, this mic is huge, very sensitive, and simply not worth the high price. I see so many people recommending and buying this microphone and it simply isn't a very good microphone. This comment may get downvoted but I just thought I'd warn against it from personal experience.

Get something like this because it would isolate noise a LOT better or this but it wouldn't isolate noise as well.

EDIT: Forgot I was on /r/bapcsalescanada, replaced the links with Canadian Amazon links. Sadly the ATR-2100 seems a lot more expensive compared to the last time I checked it (it was around $70 I think), just another day on amazon.ca in Canada where everything is more expensive I guess.

u/cybrian · 1 pointr/WeAreTheMusicMakers

Holy shit, AT2020's cheap! http://www.amazon.com/Technica-AT2020-Address-Cardiod-Condensor/dp/B0006H92QK

Is there a reason for that? Is it something I'll grow out of real fast or is it actually a good midrange studio mic?

u/kiwiandapple · 1 pointr/buildapcforme

Thank you. This helped a lot to make the right decisions.

  1. MicroCenter is awesome for some products. So we are sure to make use of this.
    If you pick up certain CPUs from MicroCenter. You get $30 off any compatible motherboard. I also looked for other parts to pick up at both of these MCs and only could find the monitor.
  2. Okay, you don't want to use a sound card for this. Instead, you want an external audio interface. I've included a very well regarded in the build.
  3. You would like to invest in an IPS monitor later down the road. When using a TN monitor as a secondary, the colors tend to shift a fair bit when you look at it from an angle. I sadly did not have the budget left to include an IPS monitor, but they cost around the $100-125 for a start.
  4. Okay, this will do for now. I doubt that you've had any complaints about these headphones & monitors?
    If you want to get a very neutral (best for recordings!) sound signature from a headphone, then consider the Sennheiser HD598. I personally use these myself and they're freaking amazing. You can find a lot of reviews of this microphone where they praise it.
  5. Hah, that's.. a shame. But in terms of microphones, there are a couple of big names in the industry. Audio-Technica, Blue, Sennheiser, MXL, AKG & Neumann (lol pricing).
    A couple of my favorites that I suggest frequently.
  • Audio-Technica AT2020 - Sound sample / comparision with AT4033a note: they've used an expensive audio interface & EQ settings to get this sound out of it. But it's possible with lesser equipment as well!
  • Blue Yeti - Sound sample #1 & Sound sample #2
  • MXL 770 - Sound sample

    ---

    I'll provide you with my standard list of videos to help you understand why I suggest these products.
    I'll also give a couple of great guides to help you build the PC.

    PCPartPicker part list / Price breakdown by merchant

    Type|Item|Price
    :----|:----|:----
    CPU | Intel Core i7-6700K 4.0GHz Quad-Core Processor | $339.99 @ Micro Center
    CPU Cooler | CRYORIG H7 49.0 CFM CPU Cooler | $34.50 @ Newegg
    Motherboard | Gigabyte GA-Z170X-Gaming 3 ATX LGA1151 Motherboard | $120.00 @ MicroCenter
    Memory | G.Skill NT Series 16GB (2 x 8GB) DDR4-2400 Memory | $53.99 @ Newegg
    Storage | A-Data Premier SP550 240GB 2.5" Solid State Drive | $58.99 @ Amazon
    Storage | Toshiba 2TB 3.5" 7200RPM Internal Hard Drive | $69.99 @ B&H
    Video Card| GTX1080| $599.00 @ Nvidia (MSRP)
    Case | Corsair 100R Silent ATX Mid Tower Case | $59.99 @ Amazon
    Power Supply | EVGA 750W 80+ Gold Certified Semi-Modular ATX Power Supply | $79.99 @ Amazon
    Operating System | Microsoft Windows 10 Home OEM (64-bit) | $85.99 @ Amazon
    Monitor | Acer XG270HU 144Hz 27.0" Monitor | $399.99 @ Micro Center
    Audio Interface| Focusrite Scarlett 2i2| $130.00 @ Amazon
    | Prices include shipping, taxes, rebates, and discounts |
    | Total | $2032.42
    | Generated by PCPartPicker 2016-05-10 02:47 EDT-0400 |

    ---

    Learn about cool technology in only a couple minutes!


    ---

  • What is overclocking?: Here - 2:32 minutes.

  • What is the difference between i3, i5 & i7?: Here - 4:32
  • What is hyperthreading?: Here - 4:47
  • What is turbo boost?: Here - 4:05
  • CPU shopping guide: Here - 5:01
  • GPU shopping guide: Here - 4:11
  • How many cores do I need for gaming?: Here - 8:18
  • Which motherboard is the best to buy?: Here - 10:07
  • Premium motherboards, worth it?: Here - 5:18
  • DDR3 vs DDR4 speeds: Here - 8:01
  • What are benchmarks?: Here - 5:21
  • Pre-built vs building your own?: Here - 6:04
  • Optical vs laser mouse: Here - 2:10
  • SSD vs HDD: Here - 4:05
  • What is resolution?: Here - 5:22
  • Different panel types: Here - 2:29
  • Monitor refresh-rate: Here - 5:46
  • What is G-sync?: Here - 5:52
  • What is Shadowplay?: Here - 3:59
  • Case air pressure: Here - 5:21
  • Case fan orientation: Here - 3:42
  • What is a NAS?: Here - 5:06
  • What PSU to buy?: Here - 5:12
  • What does 80+ mean?: Here - 3:02

    Likely that TechQuickie got even more video's that you can have a look at to get answers. It's a great YouTube channel for easy, quickly explained questions about PC tech.


    ---

    Guides


    ---

    Now before you have a look at all these guides. The best guide in most cases will always be your MANUAL. Some manuals are garbage, but most of them are more than good enough to be able to help figure out most problems.

  • How to build an Intel 115x socket PC?
    This is my personal favorite because it goes in depth, but still keeps the video relatively short.
    It also got great camera work so you are able to follow all the steps very well.
    I would suggest to install the aftermarket CPU cooler right away, then you don't have to clean the thermal paste.
    I decided to skip the start of the video. The reason being that the video is posted on 17th of May 2013, he gives the rationale of his selected parts at the start. This is a very long time ago, so the parts are very old, so no need to hear this out. But building a PC is still pretty much the same. No drastic changes.
    There are a lot of different build guides on the internet, but I really like this one. It's easy to follow.

  • How to install a 115x CPU?
    Very simple and easy to follow guide again.
  • How to install Windows 8(.1) or 10 from an USB drive?
    You have to download "media creation tool" which is located at the bottom of the page (blue button). Run that program with a 4GB+ USB flash drive plugged into a PC. Then follow the simple steps and the program will make the USB drive bootable. After that all you have to do is build the PC and boot from that USB drive to install Windows.
  • How to set up your SSD & HDD?
    This video is another older video, but it works pretty much the same in Win 8/10.
  • How to overclock an Intel 1151 Skylake CPU?
    Again a simple video and not too long. They used an Asus motherboard which got different names in the BIOS compared to other brands. So you might have to look around a little bit. But in general they're named very similar. I would personally start with a 1.2V & 44 multiplier. I might have been unlucky with the CPUs that I overclocked but 4,6GHz wasn't running at 1.2Vs that often, just one so far.
  • How to use Ninite?
    This video explains it very well, as well as their recommendations. For security I advise to only get Avira (if you don't mind to get an add every day; if you do mind - just use Microsoft Defender) & Malwarebytes. If you want to pay for an anti-virus; Webroot! Light weight; very high detection rate.

    Hope you like it and If you have any questions, don't hesitate to ask.
u/Robodachi · 1 pointr/portugal

Se tiveres disposto a pagar mais um pouco, este é dos melhores que podes arranjar. Como aspirante a músico como tu, serviu-me ok até agora.

u/Beanie234 · 1 pointr/microphones
u/Evwan · 1 pointr/hardwareswap
u/FloatFreely_ · 1 pointr/SmallYTChannel

I can't talk to free editing software, as I have always used Adobe Premier Pro which is around $20 a month.

As for a face cam, when I made gaming videos I would use a Logitech C920. I would use their software to record the face cam, and then add it to the gameplay in Adobe Premier.

For a mic, I have used my Audio-Technica AT2020. I have had this thing for years and it has yet to fail me. I could link it to the Logitech software so I could use it in place of the webcam mic.

u/feralkitsune · 1 pointr/Twitch

He is recommending you get one of their XLR mics, and an Audio USB Interface to connect it to your PC. Just used amazon as an example.

u/HokeyReligion · 1 pointr/podcasts

The ATR2100 is a really good, inexpensive dynamic mic option. The AT2020 is a great condenser option.

As for theme, find something you are passionate about. Something you can talk about no matter how you feel that day. A lot less "work" to do if you focus on something you love.

u/DatBoiJakey · 1 pointr/pcmasterrace

The Audio Technical AT2020 is a really good microphone. I have and it has really good sound quality. Link

u/Zcotticus · 1 pointr/Twitch

Here's my headphone/standalone mic set up:

Headphones: Sony MDR-7506. They are some of the best in the business.

Mic/soundcard/mixer?

Xenyx1002fx (mixer)

AT2020 (XLR Mic)

Soundcard

How much you spend, really depends on how committed you are to streaming!

GLHF
Z

u/Ephjizilla · 1 pointr/letsplay

I'd recommend - this audio interface and these mics.

When you're buying mics in the US$100 to $200 range, they're all much of a muchness as long as you stick with a decent pro-audio brand (such as Audio-Technica). However, there can be a world of difference between a $60 mixer and a $150 audio interface. Trust me on this. I've worked in the pro-audio field for many, many years. Absolutely nothing in that price range compares to the quality of audio you get through that Focusrite audio interface. It's so far ahead of the competition, it's crazy.

Behringer make bad gear. It's pretty much an accepted fact in pro audio circles that they are the absolute rock bottom in terms of quality. What you're paying for is a range of features such as 3 bad EQ, level pots, tape inputs etc (none of which you need), and what you're sacrificing to get those features is quality phantom power and gain stages. Avoid.

EDIT: Oh, and if you get the Focusrite audio interface, make sure you download the updated driver from the website. The driver it comes with is a bit shite.

u/SirGoodGuyGreg · 1 pointr/WeAreTheMusicMakers

God bless you, I stumbled upon these post and I am so glad I did, as of course we can all recall our humble beginnings, that being said, I saw you're on a very, very low budget; I will try and provide you with the best, low cost gear you can get; (Side point a decent recording studio microphone is more than 1000$, headsets around 500$ and the sound proofing panels go way up higher depending on the surface and the DAW "Digital audio workstation" would be around 1000$ usually more, not counting any VST's)
So before you go out and buy anything what you should have in mind is the purpose of your intentions; I worked for some years only using headphones and that get's pretty stressful, fast, but I found the best prices for the ones who can do their job and maintain a clear head; so here is what I believe you should try;

  1. Buy him an audio box: I am using Presonus and I simply have fallen in love with them.
    AudioBox USB - http://www.presonus.com/products/AudioBox-USB
    They usually give you a free DAW as well, witch is nice if you don't have any, I never tried it, as I am working with Ableton live before I even used a sound card.
    I also found a pack that has a microphone/ headsets / and the sound card - https://www.pitbullaudio.com/presonus-audiobox-studio-recording-bundle.html

    From the original link: http://www.presonus.com/products/AudioBox-Studio
    So this could already be of extreme help as you can get a sound card/ microphone/ headset for only under 199$, I don't know how the microphone works or how the headsets go as well, I'm just pointing them out.

  2. The headsets: I used them many years ( as I could not afford buying any decent monitors, witch should be your next investment)
    Siberia Steelseries v1 ( tho the model is so old that they do not make it anymore but you can have the better version of them, even tho they are what is called a "Gaming Headset" trust me when I say this for the money you can't have any better, they are right under €69.99)
    https://steelseries.com/gaming-headsets/siberia-200

  3. The microphone - I believe you would use a condenser microphone that would work great with vocals and acoustic guitar as well, of course the electric guitar could be connected directly into the audio box for the final recording and with some great, decent, FREE VST's you would have the most amazing sound you could get, that being said, my choice would be: Audio-Technica-AT 2020
    https://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK

    That being said; You can get the full pack of a sound card/ microphone/ headsets / for under 200$ or you could get the one's that I recommended but that would be more expensive but still under 300$; have a great day and if you have any questions, just sent me a message, wish you a great day!
u/Fenghoang · 1 pointr/headphones

I don't think all of these are technically part of the "Amazon Prime Day Deals" but:

u/NotJ3st3r · 1 pointr/audio

I would suggest you get the [Audio Technica AT2020] (https://www.amazon.de/dp/B0006H92QK/ref=cm_sw_r_cp_apa_i_yy6jDbTNXZB49) ~100€ on Amazon (get the XLR version)
And as an interface get the Behringer UM2 U-Phoria 2x2 USB 2.0 Audio Interface ~30€ on Amazon. So you can upgrade the interface or microphone later or even add a mixer when you want. For the rest of the money you can get a microphone stand.

u/popeyetyty · 1 pointr/Trombone
u/JaesunG · 1 pointr/bapcsalescanada

AT2020 $99 prime deal

u/packotictacs · 1 pointr/microphones

I'm looking to buy a microphone for my friend, but I have no experience in this department. My friend isn't going professional idol singer mode, but I do still want to have some sound quality and after doing some research, I got some came up some picks and was looking for any insight.

My picks were:

Blue Yeti USB

AT2020+ USB

AT2020 with Behringer audio interface and XLR cable? Do I need this? Its didn't seem to be included in any of these.

Are these alright just for some casual recording/singing?

u/benjammin515 · 1 pointr/audioengineering

Not sure if this post/question will go unseen or not since im a few days late but I am currently working on a small home set up. I bought the Scarlett 2i4, which I love and am running through Logic. I also bought an MXL770 and a SM57. I have been running them both for music and a podcast (just doing 1:1 test interviews right now). I am considering expanding so that I can have 4 mics set up for the podcast. So here is my question: I need to upgrade my Scarlett 2i4 to something with 4 inputs, I am looking at the Scarlett 18i8 (which I know I’ll like because I’m familiar with it) but I could save some money with the Tascam US-4x4. Does anyone here have any advice about these or other recommendations?


Second Question: I am now exploring new mics for the podcast. I like the MXL770 but I am now looking at the AudioTechnica AT2020. Does anyone have any advice about which I should go with?


Thank you!

u/asplodzor · 1 pointr/audio

A couple things:

  • What do you mean by Streaming PC? Is it for streaming youtube videos into your house, or is it for streaming gaming videos out of your house? Are you using it for both?

  • Does the HDMI connection between the the two PCs carry audio as well as video?

  • What's an AT2020? It's in your diagram, but not listed here.

  • Out to MIC does not make sense. A microphone is an input. Do you mean out to headphones (or a gaming headset with integrated headphones and microphone)?

  • (Related to the question above) Do you have speakers or a headset? Where are they plugged in?

  • What model of audio mixer are you using? They differ hugely between models. Chances are that the USB connection on yours is bidirection, so audio from your gaming computer can come out of the mixer, but audio that's in the mixer can also go into the computer.

  • Final question: How are the people in your discord party hearing the audio when you play a youtube video? Are they hearing it through your microphone?

    [Edit] After a quick googling, this is your mic, right? AT2020

    And you're using a Yamaha MG10XU mixer, right? This is the manual for it (PDF) Assuming you have your headphones plugged into the mixer where you labeled MIC, and that you're using the mixer as your microphone's input to your gaming computer, the problem that you're running into is that the computer and your headphones will always get the same audio.

    That Yamaha has kind of a "dumb" USB audio interface built into it: It only has one stereo channel output that goes to the computer. That same stereo channel is the one that's referred to as "ST" on the board, and in the manual, and is controlled by the knob marked STEREO at the bottom right of the board. Effectively, there are a bunch of ways to get audio out of that mixer (the couple pairs of outputs on the top that you can connect to an amplifier, the headphone jack, and the USB interface), but there's only one thing you can get with them: the ST channel. Every input that you connect to the board: the microphone, the streaming computer, etc, will get combined into that one stereo channel. The gaming computer is the notable exception. The board must have some kind of logic to prevent summing the USB input back into the USB output.

    Some higher-end (and more expensive) mixers will have USB audio interfaces with many channels. Some even will allow you to pick off every single input that the mixer has, and output it individually to the computer. Unfortunately, since this board does not do that, you either need to return it and get something that works better for you, use it a bit differently, or get another piece of equipment that will work alongside the board.

    If you keep the board, you need to decide whether you want to use it to connect the microphone to your gaming computer, or whether you want to use it to mix together the outputs from your two computers into your headphones. It cannot do both without combining all of the audio together like it's doing now.
u/Aperson3334 · 1 pointr/buildapc

Since you're taking /u/klepperx's suggestions and saving some money, you could get a much better microphone and still stay under budget. Since you're getting a desk microphone, there's no need to get a headset (although the Cloud / Cloud II would definitely be the ones to get). What kind of fit and sound signature do you like? Do you need the headphone to be portable? What are your requirements for isolation? Here's my reccommendations at ~$100:

  • Brainwavz HM5 - Closed back, over ear, neutral sound, not easily portable due to lack of folding hinge. Can also be found as Yoga CD880 and NVX XPT 100.
  • AKG K240 Studio - Open back (provides much better positional audio than even most virtual surround, but leaks sound and provides little isolation from background noise), over ear, neutral sound, not portable due to amp requirement.
  • Sennheiser HD 558 - Open back, over ear, neutral sound, not portable due to lack of folding hinge. These are my current headphones, and I can't say enough good things about them. They're very similar to the HD598, with the main difference being the material that they're made of.
  • Sennheiser HD 598 Cs - Closed back version of the HD 598, which are virtually the same as the HD 558. I actually thought these cost more, so they're a great deal. Be aware that they will have a different frequency response (read: more bass) due to being closed-back.
  • Audio Technica ATH-AD500x - Open back, over ear, bright (mid forward), not portable due to lack of folding hinge.

    If you don't like any of the headphone recommendations, try the /r/headphones purchase advice assistant.
u/LPMageMan · 1 pointr/audiophile

Hello, I'm new to this subreddit (and recording in general). For Christmas, I got an AT2020 microphone. I then purchased a 1-channel 48V phantom power supply to use with it. So my setup is the AT to the power supply via XLR to XLR, and then the power supply to my mic port via XLR to 3.5mm input.

I finally tried out the full setup today, and the microphone is recording much more quietly than I'd hope. I have to put my lips basically on the microphone to get a decently loud recording (in Audacity btw). I applied 20db mic boost through Windows and that fixed the issue, but I got static as well.

Could anyone more knowledgeable let me know about any settings I need to configure or anything like that? Thanks for your time!

u/Treexxjay · 1 pointr/pcmasterrace

Currently looking to purchase a budget DAC for my audio setup. I would like to possibly invest in a nice pair of headphones because I've just become sensitive to low quality audio playback, (It's something that sets off my sensory overload) I can't stand something of low quality and it bothers me that my music sounds really sub-par on spotify (Extreme setting enabled) and high bit-rate music on my iTunes.

Does anyone have any recommendations for getting into a budget Audiophile setup? My budget is around $150 for now.

---


I currently have the following for my microphone audio setup:



Mixer: BEHRINGER XENYX Q802USB

Microphone: Audio-Technica AT2020 Cardioid Condenser Studio Microphone

---

Headphones I own:

^Currently ^using ^without ^the ^Microphone ^attached: Kingston HyperX Cloud II

Logitech G933 Artemis Spectrum (I use these for walking around my house while working)

u/ClusterCucc · 0 pointsr/makinghiphop

You could drop all of that on Pro Tools or Ableton, but without some peripheral gear I'd say start with Logic. It's one of the more affordable industry DAWs and will leave you quite a bit of cash to grab some other essentials.

Namely, I would suggest monitors (over headphones) with isolation pads. The M-Audio BX5 D3 are a decent and affordable introductory set of monitors.

Besides that, I'd get an audio interface, a humble MIDI keyboard, and a decent microphone. Respectively the Focusrite Scarlett Audio Interface, the Akai MPK Mini, and the AT2020 Microphone are my personal favs.

All of this should run you less than $1000, and is a great rudimentary setup to start making some tunes. Have fun! :)

u/ZAFuzzy · 0 pointsr/Twitch

Ah, that's unfortunate, I thought the filters might do the trick, did you take a look at the Audio Technica A2020 microphone? It's listed on Amazon US for $99 with second hand offerings from $60, this link will take you to it, I heard many good things about it

u/userrnam · 0 pointsr/Twitch

If you want a mic upgrade, you shouldn't be looking for a headset mic. I can, however recommend a good headset with a surprisingly high quality mic, if that's what you're into. I must also mention that it's extremely comfortable. HyperX Cloud

If you're looking for a good starter mic for a budget, I'd try the Blue Snowball Alternatively, the Blue Yeti, but be warned that this mic is very sensitive to background noise. If you're in a noisy area and plan on speaking directly into the mic, I'd like to recommend my personal favourite and the mic I'm currently using, the AT2020.

Be careful, because the AT2020 does require phantom power, so you'll need a mixer that supports at least 48v.

**
Feel free to PM me about audio stuff! Good luck!*

u/ThanosInfinityStones · -1 pointsr/bapcsalescanada

http://www.amazon.com/Audio-Technica-AT2020-Cardioid-Condenser-Microphone/dp/B0006H92QK

Price: $84.95 & FREE Shipping.

http://www.amazon.com/Blue-Microphones-Yeti-USB-Microphone/dp/B002VA464S

Price: $104.99 & FREE Shipping.

Not exactly the same kind of price range especially with a $20 price difference and even greater depending on the retailer. Sure you may argue it is in $USD but it's similar in $CAD. Don't know where you are getting $209 from unless you are going based off MSRP.

> Move a long, and yes do more research.

Thanks but I have already and long before you even made that post.

> Your yeti isn't the be all to end all microphone, and neither is the AT2020, but a better mic it is.

See and you just made another generic statement like that. This is why I don't bother to argue on the internet because of comments like that. Don't worry I've already moved along and I won't waste my time especially since these microphones have been around for too long and fair comparisons exist.