Reddit Reddit reviews Audio-Technica AT92ECD Universal Replacement Magnetic Phono Cartridge

We found 41 Reddit comments about Audio-Technica AT92ECD Universal Replacement Magnetic Phono Cartridge. Here are the top ones, ranked by their Reddit score.

Musical Instruments
Music Recording Equipment
Audio-Technica AT92ECD Universal Replacement Magnetic Phono Cartridge
Frequency Response: 15-27,000 HzChannel Separation: 29/18 (dB at 1 kHz/10 kHz)Vertical Tracking Force: 1.0-1.5 gramsStylus Construction: Bonded round shankRecommended Load Impedance: 47,000 ohmsPhono cartridgeUniversal mount0.3mm x 0.7mm elliptical stylusDimensions: 5.5 x 0.8 x 8.3 inchesP-mount design with 1/2" mount adapterUniversal P-mount phono cartridge
Check price on Amazon

41 Reddit comments about Audio-Technica AT92ECD Universal Replacement Magnetic Phono Cartridge:

u/TophatMcMonocle · 4 pointsr/vintageaudio

I'm glad to assist as I'm a fanboy of this type of Technics turntable. I have an old hobby of restoring and collecting Japanese TTs and there's an SL-10 in my collection. I'd love to have an SL-7 too, however I'm falling behind in the "restore" area the last few years.

You will need a phono preamp since the SL-7 does not have one built in, and neither do your Miccas. The sky's the limit on phono preamp prices, however they're a rather simple beast so even the cheapest ones work pretty damned well. To keep things simple for now I'd recommend this one for sixteen bucks.

https://www.amazon.com/Pyle-PP999-Phono-Turntable-Pre-Amp/dp/B00025742A

Assuming the SL-7 is good to go and has a cartridge/stylus with some life left in it, that'll be all you need to make music. Your Miccas have amplification built in, so that's it.

If you do need a new P-mount cartridge, this one is very good for the $27 it costs. It's what I have on my SL-10 because I can't afford high-end carts on everything. Be aware there's a small screw that holds it in place on that little tonearm and it must be completely removed first. It's hard to see, so people have ripped off the entire arm trying to pull the cartridge free.

https://www.amazon.com/Audio-Technica-AT92ECD-Universal-Replacement-Cartridge/dp/B00006HO3L

Last thing I should mention, there are two plastic ears on the SL-7 that are a failure point, since all examples of this turntable are very old now. They latch the lid to the lower portion, or plinth. Treat them very gently as there are no replacements for them.

u/sampsans-ape-spray · 4 pointsr/vinyl

stylus = "the needle".

Sounds like you have the cartridge--it just needs a new stylus.

Here are some Sure styli: http://www.needledoctor.com/Online-Store/Shure-Stylus

Not sure which would fit that particular cartridge, though. I'd send that web site an email and ask.

If you just want a cheap p-mount to try: https://www.amazon.com/Audio-Technica-AT92ECD-Universal-Replacement-Cartridge/dp/B00006HO3L/ref=sr_1_2?ie=UTF8&qid=1498699903&sr=8-2&keywords=p-mount

u/nevermind4790 · 4 pointsr/vinyl

Yes, being a linear tracking turntable helps to minimize tracing error from start to finish of the LP. It's P-mount so the VTF is already set at 1.25 grams, which is enough to prevent mistracking.

They get a bad rap, but that's because overtime the rails that the tonearm glide across get gunked up and it stops working. Clean it up, relube it, and it will work fine. Also, there's a tiny belt that attaches to the motor and a wheel that allows the tonearm to move to the left. If it's loose, it won't function properly. If it's not loose and can perform its duty, then you're fine for now BUT you really ought to replace it.

The Audio Technica 6006 cartridge is an older model of the modern AT90/92E/311EP/3482 series of cartridges. They're all P-mount. The 6006 should be closest to the AT311EP since they both have an output of 5.0 mV and a .3 x .7 elliptical stylus. I use an AT3482P on my LT turntable and enjoy it very much. The AT92ECD is also nice, though IMO I prefer the AT3482P because it isn't as bright. You don't have to buy a new cartridge, but in this case it makes sense because 1) it's cheaper and 2) you will get a stylus protector with a new cartridge.

Before you go playing any records (I know, it's tempting), make sure to replace the cartridge/stylus and ensure that the tonearm is functioning properly. Linear tracking P-mount units can be a pain in the ass to get working, but once you do you will have a hassle free turntable.

u/jeff8086 · 3 pointsr/vinyl

nevermind4790 is right, the Sony is no go. The Sanyo on the other hand should be a great first or secondary table. I say this because I have a TP256 I found for free that I use as a secondary TT, and from what I can tell from a blurry manual pic off ebay, they look to be about the same. I can only assume the 356 has better specs? if it is the same as the 256, it's a pmount, so you're looking at about a 1.5g tracking force and an abilty to us a decent cart. At first glance the Sony appears to be a similar cheap plastic turntable but the Sanyo is better. Grab a http://www.amazon.com/Audio-Technica-AT92ECD-Universal-Replacement-Cartridge/dp/B00006HO3L/ref=pd_sim_e_2?ie=UTF8&refRID=0312ZAAS5T0Y504F8PHE and this is the belt I used... http://www.amazon.com/gp/product/B005GM2M9E/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 . I know it shows a really bad t-shirt, but I did receive a belt and it worked perfectly.

u/GothamCountySheriff · 3 pointsr/vinyl

It's a P-Mount plug-in type tonearm. It's missing the cart and the sidescrew that holds the cart in. Fortunately carts are relatively inexpensive. The Audio Technica AT-92E is a nice cart/stylus combo and relatively inexpensive at $25. It should also come with the sidescrew.

http://www.amazon.com/Audio-Technica-AT92ECD-Universal-Replacement-Cartridge/dp/B00006HO3L

This is thing though. Your talking about $40 for the table, $25 for the cart, $10 for a belt. Your now $75 into it and you don't know if it even works. That's also toward the top end of the value of this turntable, if not a little beyond. It's realistically a $25-30 turntable, especially in it's condition. If you were to get this from a shop, I would guess your looking at $65-70 with the new belt and cart installed and that would be with some kind of warranty.

u/msuts · 3 pointsr/vinyl

Looks like a standard mount cartridge to me. Your current cartridge, if using original stock, is the JVC MD1055 which is a rebranded Audio Technica AT3600. The cheapest replacement stylus for this cartridge is the Pfanstiehl 4211-D6, which costs $7.89. The official Audio Technica replacement stylus, likely higher quality, would cost roughly $14 plus shipping. I personally use a Pfanstiehl stylus on an AT95e cartridge for records that I do not want to play with my nicer AT440MLa, and the sound quality is not bad especially considering it cost $8.

The cheapest full cartridge replacement, and keep in mind this is not optimal but will probably sound the best at this price range, is the Audio Technica AT92ECD.

u/1_man_band · 3 pointsr/vinyl

You could get one of these and upgrade the stylus with one from LP Gear.

The LP Gear upgrade styli can be expensive though, so maybe you'd upgrade the stylus later on. I've put the AT92E on two different turntables and given them to friends, I've been very impressed by their performance.

u/checkerdamic · 2 pointsr/vinyl

I think it's will be okay for those few months if you pick up a new stylus or cartridge and the tracking force is set properly. Because it does not have a counterweight that you can balance you need a scale to measure the tracking force (it's always good to have one anyways for future turntables). Any scale that can read hundredth of grams should be fine. You can pick them up on Amazon from $10-30.

Also, pick up a new stylus for your cartridge. If you do not know what cartridge is on it here are two options: (1) better option: Audio-Technica AT92ECD $25 on amazon, and (2) slightly cheaper but worse option: Audio Technica AT3482P $20 on amazon.

With the cartridge/stylus install the scale should read 1.25g (at little higher at 1.5g is also fine).

If you find that vinyl is your thing, upgrade it in the future. New decent starter tables are things like the U-Turn Orbit, Audio-Technica LP120 (don't get an LP60, the table that you have now is better if working properly). Check out the Entry Level Turntable Guide. There is always the option of going used as well, just make sure you research and test everything. Good luck. Hopefully, that helps you out.

u/tonyviv · 2 pointsr/vinyl

The cantilever (shaft) is bent so the stylus is ruined. That's a Sony cartridge and isn't very good anyway so just get a whole new cartridge. The Sony headshell should be fine but you can replace it with a Technics if you want for $20 http://www.amazon.com/dp/B003DY5Q4K/. Under $50 budget cartridges that are good for the money:

$20 http://www.amazon.com/dp/B00006HO3L/

$35 http://www.amazon.com/dp/B00WYROYE0/

$40 http://www.amazon.com/dp/B004NRVUMI/

Lastly, you can get a copy of the owners manual and service manual here if you create an account http://www.vinylengine.com/library/technics/sl-d2.shtml.

u/Antwan1995 · 2 pointsr/vinyl
u/LionsMouth · 2 pointsr/vinyl

Do you have pics of the TT? These things were sold as p-mounts and with a standard headshell as well.

If you want a cheap p-mount cart, buy this:

https://www.amazon.com/Audio-Technica-AT92ECD-Universal-Replacement-Cartridge/dp/B00006HO3L/ref=sr_1_2?ie=UTF8&qid=1466801314&sr=8-2&keywords=at+pmount+cartridge

I'd do that before buying a crappy replacement stylus for the cart you already have. It's pretty much the cheapest decent cart on the market right now AFAIK.

u/a1exi · 2 pointsr/vinyl

I've got an sl-6 and I just bought a digitrac 300se cartridge. Sounds fantastic, but it cost me around £90 off ebay. Before that though I had an Audio technica AT92E that sounded great.

http://www.amazon.co.uk/Audio-Technica-AT-92ECD-P-MOUNT-CARTRIDGE/dp/B00006HO3L/ref=sr_1_5?ie=UTF8&qid=1394323487&sr=8-5&keywords=at+92e

u/tempal78 · 1 pointr/vinyl

I'm hoping to find a cartridge replacement (I was told it was damaged, not sure how I'd check if that's the case or not)
I found this but not sure if it would work

u/naomar33 · 1 pointr/audiophile

The turntable is a Gemini PT-2000 II

Cartridge/needle/stylus is a Stanton Trackmaster II

Looking to replace the entire thing, not just the tip. Would this work?

https://www.amazon.com/gp/aw/d/B00006HO3L/ref=pd_aw_sbs_23_1?ie=UTF8&psc=1&refRID=2V80VR1173992R7GV9EA&dpPl=1&dpID=81vWTpRdg%2BL

u/formlesstree4 · 1 pointr/vinyl

You mean something like this? This is the first thing I bought for it and replaced the original with.

u/benexhale · 1 pointr/vinyl

I definitely won't claim to be an expert, but i recommend getting a cheap cartridge to start off with if you're new to vinyl. Something like like an Audio Technica AT 92ECD (http://www.amazon.com/gp/product/B00006HO3L/ref=oh_o04_s00_i00_details) it's super cheap, but still a really solid starter cartridge.

u/ellamay77 · 1 pointr/vinyl

Hi all, I am wondering if I could get some cartridge suggestions for my vintage turntable.

I have a JVC QL-F4 I picked up at a thrift store. It powered on and the platter spun, so I took a chance, and it worked out great. With some minimal cleaning and minor repairs the table works really well. The table came with a trashed Grado cartridge (the needle actually fell off when I took the cartridge out of the headshell). Because I didn't know, until I finished cleaning/fixing it, how well it would work, I didn't want to do a major investment into a cartridge. I picked up an [Audio-Technica AT92ECD] (https://www.amazon.com/gp/product/B00006HO3L/ref=oh_aui_search_detailpage?ie=UTF8&psc=1) and it sounds fine - sometimes I feel the highs are a little harsh. So, if anyone has any suggestions for better cartridges for this turntable in the $50-$100 range, I'd love to hear them.

u/sunari · 1 pointr/vinyl

Ok so he didn't have a headshell or cartridge, so it's up to me to buy them. Crap.

Do I need a specific kind of headshell and cartridge for my turntable, or can I use any MM cartridge and any headshell? I had my eyes on this cartridge, but wasn't sure if this could only be used with Technica turntables. I was looking at this headshell as well. The main selling point for me on these were their price; I'm trying to find these at cheapest prices possible (while maintaining quality of course). Could I get these, or would they not work with my record player?

u/billcom6 · 1 pointr/vinyl

So it is still worth replacing?
And (noob question) if I bought this that is the cartridge and stylus all in one? Just unplug the old one and plug that in?

u/itisrocketscience · 1 pointr/vinyl

DIY feet wouldn't be a bad idea. There are some tutorials for sound isolation feet which would also be a bit of an upgrade. This would probably be the best option. Do a quick google search.

If this http://www.vinylengine.com/library/pioneer/pl-518.shtml is your TT, you can replace the cartridge pretty easily since it would be standard 1/2" mount. The 3003 Cartridge has been discontinued but it is the same body style as the AT92ECD so the replacement styli should fit. Just get replacement for it instead of switching out the whole cartridge.

http://www.amazon.com/Audio-Technica-AT92ECD-Universal-Replacement-Cartridge/dp/B00006HO3L/ref=sr_1_1?s=electronics&ie=UTF8&qid=1449680295&sr=1-1&keywords=at92


http://www.amazon.com/Audio-Technica-ATN3472SE-Replacement-Stylus-AT92EC/dp/B000BHRMBC/ref=sr_1_1?s=electronics&ie=UTF8&qid=1449680347&sr=1-1&keywords=Audio-Technica+ATN-3472SE


u/bootbox · 1 pointr/vinyl

Yeah it's set for sure, although I think I can make out settings for 1.0g, 1.25g, and 1.5g for the tracking weight.

After googling your table's model number it looks like your cartridge is a P-Mount type, they are universal, nothing to worry about.

If you're getting skipping and bad overall tracking performance and you're sure it's not due to damage to the actual record surface, it's time for a new stylus/cartridge. The Audio-Techinca P-Mounts are nice, you can't go wrong really and they're cheap - http://www.amazon.com/Audio-technica-AT-92ECD-Phono-Cartridge/dp/B00006HO3L/ref=sr_1_1?ie=UTF8&qid=1343098371&sr=8-1&keywords=at92cd

u/TommyEria · 1 pointr/vinyl

The AT92e is a really good, and cheap, p-mount cartridge. I'd go for that. Do you have a budget? I also like Grado's, but they sound better at 1.5g, and I don't think you can adjust tracking on that table easily.


https://www.amazon.com/Audio-Technica-AT92ECD-Universal-Replacement-Cartridge/dp/B00006HO3L/ref=sr_1_1?ie=UTF8&qid=1504999796&sr=8-1&keywords=at92e

u/Elstir19 · 1 pointr/vinyl

Needing help with new set up for my wife’s Technics SL-BD20

17 years ago my wife and I got married and moved into a new house and my wife’s old Technics SL-BD20 turntable never got unpacked. We had small children at the time and not much room.

Now the kids are older and we still don’t have much room, but she’s always been a big fan of vinyl and as a Christmas present I’d like to get her up and running again!

I considered buying a new turntable (the LP120), but she’s always cherished her SL-BD20 turntable, so I am pretty set on keeping this turntable. If she really gets back into vinyl we can upgrade in a couple years.

And I want to keep the whole process as simple and straightforward as possible since I really have no clue what I am doing!

Today, I plugged in the turntable and everything appears to be functioning as it should.

She has a Sony LBT D108 stereo with direct phono hookup and some large-ish Sony SS-D110 speakers. I want to ditch these and figure out a smaller set up for the time being.

I’d like to keep the footprint as small as possible and as I am a woodworker I may even build her a cabinet and shelf unit to house everything.

So from my research it appears I need a pre amp and some powered speakers. And a new cartridge. And probably a new belt to have on hand.

I was wanting to spend about $50 on the pre amp. From doing a little research this seems to be a good one: ART Pro Audio DJPRE II https://www.amazon.com/dp/B000AJR482/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=1MCQTNZBUHMQG&coliid=I3A0D31NILP92W

Another $25 on a cartridge: Audio-Technica AT92ECD

https://www.amazon.com/dp/B00006HO3L/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=1MCQTNZBUHMQG&coliid=I3N3SNC9BX4PUV&psc=1

And then perhaps some smallish powered bookshelf speakers for around $100 or perhaps a bit more if it makes sense. I could really use some suggestions on speakers.

I’m looking to maybe spend a couple hundred bucks total to get her back to listening to vinyl.

Sorry, I am a total noob and have zero experience with stereos etc. Will I need any other adaptors or speaker wire or anything else?

u/Elementalkey · 1 pointr/vinyl

Which cartridge should i get for my Technics Sl-B92 turntable? I was researching and I came across this [cartridge] (https://www.amazon.com/dp/B00006HO3L/_encoding=UTF8?coliid=I123AF3QUV9U0U&colid=1RQI2F5DKLCXK)

u/kingfrito_5005 · 1 pointr/vintageaudio

Thank you so much! I am looking at the Audio technica AT92ECD in this link: http://www.amazon.com/Audio-Technica-AT92ECD-Universal-Replacement-Cartridge/dp/B00006HO3L/ref=sr_1_3?ie=UTF8&qid=1419799964&sr=8-3&keywords=phono+cartridge I dont suppose there is any way you could tell me how to install it in the head? There dont appear to be any holes to screw it in.

u/AmadeusK482 · 1 pointr/vinyl

Any of the inexpensive audio technicas are excellent sounding...

http://www.amazon.com/Audio-Technica-AT92ECD-Universal-Replacement-Cartridge/dp/B00006HO3L/ref=sr_1_3?ie=UTF8&qid=1459468737&sr=8-3&keywords=audio+technica+cartridge

The AT311LP is their elliptical for ~$35, and the conicals are cheaper.

u/impulse007 · 1 pointr/vinyl

thanks! Not sure if one was necessarily "better" in terms of audio quality. In terms of p-mount cartridges, I was planning on replacing the cartridge with an audio-technica AT92E. Probably going to get the SL-L1 unless there's something wrong with it.

u/obeetwo2 · 1 pointr/vinyl

Alright thank you, I think I'm just gonna hold on to the cartridge and get a cheap p mount cart (with a needle haha) for like 20 bucks, this would be compatible right? https://www.amazon.com/dp/B00006HO3L/_encoding=UTF8?coliid=I14HH7CRH6O6YK&colid=2LZ65P3GK12YE

u/djmikebrady · 1 pointr/vinyl

Here's a good one at $25 - there are a handful of other brands making P-Mount cartridges as well, but AT has the best selection in your price range.

u/dr_torque · 1 pointr/audiophile

For a P-mount cartridge, you could consider the AT92E.

As far as upgrading goes, don't your speakers have built-in subwoofers? A new turntable certainly ought to be part of the upgrade - p-mount tonearms are quite basic.

u/RealDiels · 1 pointr/vinyl

Hi guys, I'm relatively new to playing records. I've had a turntable setup for a year or so, but don't get to use it that much.

My question is, how do you control static pops and clicks? Even on the records I buy brand new, I still get pops and clicks and my turntable sounds nowhere near as good as playing music from my iPod to my receiver. I have:

  • Infinity Interlude Il60 speakers
  • Harmon Kardon AVR325 Receiver
  • An 80s Kenwood preamp (not the best, I know, but I don't think it should be that weak)
  • A late 80s Technics home turntable, not one of the nicer professional type ones

    I replaced the cartridge with this Audio Technica cartridge, hoping it would help out, but it didn't help much at all. I realize it's a cheap cartridge, but so is my preamp and turntable.

    I have used this record washing contraption and this anti static brush, but niether seem to keep the dust off of my records, and pops and clicks develop way too quickly.

    I love spinning some vinyl, but when the sound quality doesn't compare to digital music, it really turns me off :(

    What do you use to keep your records fresh and clean, and what can I do to control dust and static on my records so I don't ruin them?
u/Ernstero · 1 pointr/turntables

Look for a pmount cartridge something like this Audio-Technica AT92ECD Universal Replacement Magnetic Phono Cartridge https://www.amazon.com/dp/B00006HO3L/ref=cm_sw_r_cp_apa_SpieAb27Q8AV0. There are less expensive types as well, in the $15-$25.00 range.

u/chippewhattha · 1 pointr/vinyl

Seconding what nevermind said about contacting needledoctor. It's only slightly more to replace the whole cartridge with a modern option, like these, all 1/2" standard carts:

AT95E

Shure M97xE

AT92E

This will help you get it all lined up easily

And a small screwdriver set, needle-nose pliers, and you're good to go. The two screws on the top of the headshell let you remove the cartridge assembly and adjust its position when you put the new cart on.

u/Teknofiliak · 1 pointr/audiophile

I am just starting out and I am looking to dual purpose my home theater as a listening room as well.

I have a pair of the Micca MB42X speakers and a Denon AVR-X1000.

I just picked up a Technics SL-BD22, the Behringer PP400 Pre Amp, and a new cartridge.

Are there any glaring issues with this setup. I don't expect amazing audiophile quality, but would like a solid setup.

u/j_s_p_ · 1 pointr/vinyl

You can find a new belt for your SL-BD3 here: https://www.ebay.com/itm/Technics-Turntable-Belt-SL-BD1-SL-BD2-SL-BD3-READ-This-Before-Buying-Any-Belt-/280833761033. I've purchased a belt for my Technics SL-BD20D from him before, and he provides a quality product.

As for a new cartridge, since you own a P-mount (T4P) turntable, I would recommend the Audio-Technica AT92E. You get a good bang for your buck with this one: https://www.amazon.com/Audio-Technica-AT92ECD-Universal-Replacement-Cartridge/dp/B00006HO3L

You will definitely need a phono preamp for your turntable. Or just an amp with the built-in phono preamp.