Reddit Reddit reviews BEHRINGER U-PHORIA UMC202HD, 2-Channel

We found 48 Reddit comments about BEHRINGER U-PHORIA UMC202HD, 2-Channel. Here are the top ones, ranked by their Reddit score.

Musical Instruments
Music Recording Equipment
Computer Recording Equipment
Computer Recording Audio Interfaces
BEHRINGER U-PHORIA UMC202HD, 2-Channel
2x2 USB 2.0 audio interface for recording microphones and instrumentsAudiophile 24-Bit/192 kHz resolution for professional audio qualityCompatible with popular recording software including Avid Pro Tools*, Ableton Live*, Steinberg Cubase*, etc.Streams 2 inputs / 2 outputs with ultra-low latency to your computer, supporting Mac* OS X* and Windows XP* or higher2 state-of-the-art, MIDAS designed Mic Preamplifiers with +48 V phantom power
Check price on Amazon

48 Reddit comments about BEHRINGER U-PHORIA UMC202HD, 2-Channel:

u/gutie5 · 5 pointsr/musicproduction

This is the one I use and it works really well, would definitely recommend for a first audio interface. BEHRINGER U-PHORIA UMC202HD, 2-Channel ( https://www.amazon.com/dp/B00QHURUBE/ref=cm_sw_r_cp_api_i_v0wkDbXTEJ1G7

u/YaBoyNazeem · 4 pointsr/podcasting

One problem is that mixer doesn't have two XLR input channels. Most mixers or interfaces that are used with multiple mics have multiple XLR inputs. That Mixer does have line in inputs though. So I think you would need to either get a new mixer OR try to use something like this.... https://www.amazon.com/Hosa-YMP-434-Stereo-Breakout-Cable/dp/B0010D0HO0/ref=sr_1_3?keywords=1%2F4+stereo+to+female+3.5mm&qid=1556022969&s=musical-instruments&sr=1-3

​

I don't know how well that would work because I have never done it but it's worth a try if you're strapped for cash.

​

This can connect your 3.5mm input from your Toner mic in to your Line in 2/3 input on your board.

​

An example of an interface with two XLR inputs is this:

https://www.amazon.com/Behringer-UMC202HD-BEHRINGER-U-PHORIA-2-Channel/dp/B00QHURUBE/ref=sr_1_3?crid=3OV6SCTD4YARR&keywords=behringer+umc202hd&qid=1556023240&s=gateway&sprefix=behringer+u%2Caps%2C156&sr=8-3

​

A mixer with two interfaces is this:

https://www.amazon.com/Behringer-Q802USB-BEHRINGER-XENYX/dp/B008O517IC/ref=sr_1_6?keywords=behringer+xynex&qid=1556023157&s=gateway&sr=8-6

u/ShiftyAsylum · 3 pointsr/unixporn
u/spankymustard · 3 pointsr/podcasting

Here's my recommendation for a podcast starter kit:


u/SpongeBobNudiePants · 3 pointsr/Twitch

I'm actually more of a fan of the 5 mic idea rather than one condenser, for the reasons that /u/carlmmii outlined below. I'm also going to second the idea that running the mixer via Line In, while it may work, isn't the best way to go about doing it. It will work, but the chances of having unintended audio issues (hum, etc) are increased. Instead, I would recommend pushing the mixer budget a little bit to get one with a dedicated USB audio out, or running the mixer L/R outputs into something like this.

​

As far as good mics in the $50 range, I'd go with Shure PG48s. They're cheap, sound decent, and Shure has a reputation of being incredibly tough. Regardless of which mic you pick, I'd recommend dynamic over condenser to cut down on the amount of vocal bleed (i.e. the voice of Player 1 getting picked up in Player 2's mic) and overall reduction in table noise/dice dropping/etc.

u/darkworldaudio · 3 pointsr/FL_Studio

Well this interface is really highly rated, exceptional quality for the price and this DI box was standard use back in uni. Hope that helps get you started anyways.

u/ilrasso · 3 pointsr/WeAreTheMusicMakers

this behringer umc202hd might be just what u need. You can setup how what you want to monitor, so having both the mic recording and the playback in the headphones while recording only the mic audio is no problemo. Consider using the recording software called Reaper. It is cheap/free and very nice.

u/randomdoohickey · 3 pointsr/Twitch

The Cloudlifter would be a complete waste of money here and many people use them where they aren't needed.

The bad news here is that Behringer's classic mixers are just plain garbage. End of story. Good for seeing how high it will bounce when being thrown off the roof of a building though.

I would go so far as to say you shouldn't even look at mixers at all unless you're playing an instrument like a guitar in addition to using the mic. You mix where your sources are, so on a gaming PC you need to mix in software on the PC, not in some external box that you need to setup loopback on. The type of software mixer you're looking for is Voicemeeter.

Behringer's "HD" audio interfaces, however, are pretty decent on the cheap. I just wouldn't touch anything less than the $60 UMC202HD though.

At the end of the day, a 2-input/2-output USB audio interface like the Behringer UMC202HD is all you need. I wouldn't bother with an external hardware mixer at all. It's just not needed. If you want to spend a bit more on a nicer interface, Tascam, Roland, and Zoom are worth looking at. Just don't buy Focusrite Scarlett as their Windows 10 drivers are straight-up broken and won't be fixed any time soon.

Get a decent mic arm like the On Stage MBS5000, plug one end of the XLR cable into the SM58, then the other end into your audio interface, e.g. UMC202HD. Plug your speakers and headphone into the interface. Done. That's all you need. You don't even need a foam ball as a vocal dynamic like that SM58 has a built-in pop filter foam behind it's screw-on head. You can stop using your motherboard's onboard audio entirely too. Maybe do an isolation mic clip if you're feeling fancy.

Remember you need a mic arm as putting your mic on the desk is too far away from your mouth and the mic will pick up more keyboard, mouse, and room noise than it will of your voice.

https://www.amazon.com/dp/B01BWM5E8C

https://www.amazon.com/dp/B0002ZO60I

https://www.amazon.com/dp/B00QHURUBE

Some adapters you might need, maybe, depending on how your PC speakers are setup:

https://www.amazon.com/dp/B0010D0HO0

https://www.amazon.com/dp/B000068O3S

https://www.amazon.com/dp/B000068O18

u/blackking023 · 3 pointsr/Reaper

So as another 29yo musician figuring out reaper over the past few weeks. Definitely watch tutorials, how to's, and basic use videos from youtube and stuff posted here. You'll learn way more from doing that faster than you will from poking around. Most of the time i just google something like "Reddit Render Midi track in reaper" and i'll get a link to this sub with a video.

Definitely get an audio interface, i'll help tremendously with overall sound and latency. I think something with two channels will work well for you. You'll most likely only be recording one instrument at a time if you're doing this solo but the option of the second channel will let you record an acoustic performance if you ever want to. I have no brand loyalty so here's a few options, you can do research on them as you see fit or search some out yourself:

UMC202HD , Scarlett 2i2 , AudioBox USB 2x2

Or if you need to be more budget friendly, this guy is a great bang for you buck, however it is only one channel:

Behringer UM2

If you dont have any 1/4" headphones, pick up a 1/4" male to 3.5mm female adapter as well so you can monitor your sound and for playback through the interface. You can find these at bestbuy or somewhere local pretty easily.

You'll want to look at some 3rd party VSTs for effects instead of your phone. I'm currently in the process of trying different free things out, so i don't have too many suggestions unfortunately, but maybe some other people can chime in with their favorites. I'd watch youtube tutorials to learn how to setup and use these. two I could recommend so far are:

MT Power Drumkit 2 - Simple drum VST that allows you to pick from a select of beats in different styles, then once you import them into reaper you can change the beat with the MIDI editor as you see fit. Watch some youtube tutorials on it to get going using it.

AmpliTube Custom Shop - Comes with a few amp, cab, and effect options that should get you going with some guitar sounds. You can also get the demo version of AmpliTube Full and it will run for 30 min, then you have to close and reopen it for it to work again (seems to be a common setup for demo versions of VSTs), but you can get a good bit in 30min if you know what you want going in.

u/russiandressing · 2 pointsr/VoiceActing

+1 for being in the same boat as you! 31/F/originally from NY. Professional singer of 10+ years; have always been told I have a very unique and soothing voice. I've honestly been stewing on this for over a year and hadn't pulled the trigger until last week. I sat down and figured out what it would ACTUALLY take me (financially and space-wise) to give it a real try.

I have a closet in my current "studio" with all of my guitars and what not; I figured I could commit to turning this space into a booth. I did the math and realized I could treat the space acoustically for $179. eBay had 2" foam panels for way cheaper than anywhere else. Is it the BEST product out there? Probably not - but it will definitely get the job done.

Equipment wise, I figured out that I'd need an updated USB interface and a dedicated VO microphone. I ordered both of those things for $130. Here's what I ordered:

Mic: https://www.amazon.com/gp/product/B0007NQH98/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

USB interface: https://www.amazon.com/gp/product/B00QHURUBE/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

Again, not top-of-the-line products, but I did my research and these both seem to be solid choices for beginners. I've cleared out the closet and I'm currently waiting for the panels to arrive. They get here tomorrow, so hopefully I'll be able to install them on Thursday or Friday morning. They need to "sit" for a bit to uncompress. Haha.

Anyway, I hope my story has helped you! As soon as I get my booth set up, I plan to take webinars and learn, learn, learn. I'll also spent a significant amount of time just recording practice scripts. I learn by doing, so there will be a LOT of doing going on. Haha. I feel as though I could be a tiny bit ahead of the game since I have experience recording and I'm comfortable with recording software and gear. I've also been using my voice as a tool for over 10 years..but in a different way.

Good luck and feel free to hit me up if you need some motivation! I know I've doubted myself multiple times since committing, but I've gotta go for it.

u/Aksen · 2 pointsr/audio

I'm not gonna give a full write-up, but I'd like to point you in the right direction...

And take all of this with a grain of salt. You could probably buy a Behringer UPHORIA for $60 and be done with it.




General

  • What you're looking for is an "Audio Interface".
  • USB 2 is fine. You don't need to look for USB3 or Firewire etc
  • Consider how many inputs and outputs you need.
  • Keep in mind there's a difference between XLR (3-pin) and 1/4 inch (guitar cable) inputs. The XLRs have a preamp, which you need for a microphone. Some XLR inputs also have a 1/4 jack in the center, this is a "combo" jack. Good cause you can use it either way.
  • They'll say "18 inputs!" and they're counting digital (ADAT digital) inputs. You likely won't use these. Make sure you're getting what you need. I don't know your situation, but it seems most people need 2 XLR combo jacks.


    Ruminations on brands

  • Focusrite & Presonus get a lot of love in the budget range (sub $200)
  • Behringer interfaces are probably just as good as focusrite/presonus, at half the cost. They are all definitely budget solutions.
  • When I say "Budget" I mean the drivers will be difficult to wrangle, you'll have lag when recording etc... but they'll sound fine and work alright outside of that. Also, I've never had a Focusrite last more than 3 years.
  • RME is the king of home recording interfaces. Expect to pay closer to $1000. Consider this the ceiling of what a reasonable person would need to spend for a decent home recording setup.
u/iscreamuscreamweall · 2 pointsr/audioengineering

grab a cheap/free DAW like reaper or audacity or even garage band

grab a 2 channel audio interface


plug the stereo line outputs of the tascam tape recorder into line inputs 1 and 2 of the interface.

set the DAW to record at 16 bit 44.1

press record on the DAW and play on the tape machine

???

profit

u/mstrblueskys · 2 pointsr/TwinCities

I have a buddy who runs a music studio, but if you needed the space, he'd definitely set it up for a podcast interview.

I do tend to agree that you should be able to get pretty close to studio sound on a budget assuming you have a computer already. I understand that sometimes owning stuff is a huge hassle itself, but if it's something you want to do a few times, the cost savings would start to be there.

Since no one has given you any real advice on how to do this, I can give it a shot.

I'd start by installing Audacity on your computer. It's super basic, but what you're doing is super basic. And it's super free. That's a huge plus.

Next, decide how you want to do microphones. First, you'll want stands. If it's an interview/two person thing, you'll need a couple of these (or more if you want more mics). We're at $25 for two now.

Next, decide what quality you want to be at. The Blue Snowball is a pretty great entry level microphone. I've honestly never run two into a computer before, but I imagine it'd be easy enough to record two different microphones on two different tracks in Audacity. That would bring our total to around $150. To upgrade in this way, you would go to something like the Blue Yeti. At over $100/unit, that adds another $100 to your cost.

The other way to do microphones is using a USB Interface for your computer and buying standard microphones. I'm keen on that option because it's a little more flexible if and when you look to upgrade your setup. You can use $15 microphones to get by or if you're locked and loaded, you can upgrade to really nice condensers.

As far as soundproofing goes, you can decide if that's possible wherever you're at. The last voice over project I worked on, I hung blankets in my bedroom and that was perfectly fine. Obviously that's not the most professional look, but there wasn't a pile of ambient noise to deal with and the directional mics do a good job focusing on your voice. You can build sound dampening walls with plywood, insulation, and fabric if you really want. It takes a staple gun, some screws, and about an hour per panel.

Assuming you have the time, an okay computer, and about $300, you could really build yourself a nice studio. If this is a one off kind of thing, it's definitely not worth it. My buddy's place is called, The Petting Zoo and I'd be more than willing to ask him details if you want.

Either way, good luck!

u/Widget_pls · 2 pointsr/edmproduction

Seconding a big SSD (I like the Samsung ones, and among the types of SSDs, NVMe is usually 4x the speed of SATA if you have an M.2 drive to put one in, but only really new computers will have an M.2 port.)

The SSD won't really make anything faster but really big projects with an "old" spinny hard drive can take like 3 minutes to load.

Basically if you have a true ASIO card (and not a card which is "compatible" with ASIO4ALL since all cards are but it's fake ASIO) anything with an i3 or better (i3, i5, i7, i9, Xeons at 2.4ish GHz or faster, any AMD Ryzen or Threadripper processor) is probably fine.

It's worth pointing out that Intel laptop processors are like half as powerful as desktop ones, and a laptop i5 is usually about as fast as a desktop i3 (so subtract 2 from the "i" number.) For the most part AMD doesn't have good laptop processors yet but they'll be coming soon-ish (also under the Ryzen brand.)

I'm a fan of the Behringer UMC202HD because even though Behringer's history makes their products somewhat suspect, meaning it might break after a couple years, the drivers are "good enough", the audio quality is basically flawless, and it works with condenser mics. (To be fair it's mostly their DJ equipment people hate as far as I know since their DJ stuff doesn't like to take a beating unlike most other companies'.)

Edit: On the Amazon Questions for the specific computer you linked, someone said they were able to install a Samsung Evo 970 NVMe SSD in the M.2 port it has, but it was somewhat difficult to get to (probably because there's a bunch of stuff right next to it and NVMe drives are really small - about 2/3 the size of a stick of RAM.)

u/SacredMaskMusic · 2 pointsr/homestudios

You can get a MXL 770 for under $100 and a 2-channel Behringer U-PHORIA for around $100. This will definitely be enough to get you recording. I use this set-up (mostly for recording samples and very limited vocal work, as I do electronic instrumentals for the most part) and it does the job. That leaves you $200 for accessories (you're gonna want a stand for the mic and a pop screen before you even think about acoustics). You can get an acoustic shield for well under $100. Pop screens are as low as $10 on Amazon. You can definitely stay in that budget if you're only looking to record rap vocals.

MXL Mics 770 Cardioid Condenser Microphone https://www.amazon.com/dp/B0007NQH98/ref=cm_sw_r_cp_apa_i_Hhj2CbR9JD6X1

BEHRINGER U-PHORIA UMC202HD, 2-Channel ( https://www.amazon.com/dp/B00QHURUBE/ref=cm_sw_r_cp_apa_i_Rij2Cb226B0WC

(I haven't actually used these two products before, just providing you with quick search results. Definitely shop around first)

LyxPro VRI-30 - Portable & Foldable Sound Absorbing Vocal Recording Panel - Stand Mount https://www.amazon.com/dp/B012OFI98I/ref=cm_sw_r_cp_apa_i_Wkj2Cb78J3YWP

NEUMA Professional Microphone Stand with Pop Filter Heavy Duty Microphone Suspension Scissor Arm Stand and Windscreen Mask Shield for Blue Yeti Snowball, Recordings, Broadcasting, Streaming, Singing https://www.amazon.com/dp/B07JHCL3KS/ref=cm_sw_r_cp_apa_i_Coj2Cb8MF5N0G

u/blackjakals · 2 pointsr/BudgetAudiophile

An audio interface with balanced outputs would work best. The have outputs for monitors and headphones.

A DAC/Amp combo would work too, but you may get more noise.

I suggest any of the following for an interface:

https://www.amazon.com/Mackie-Onyx-Artist-1-2-Interface/dp/B07664LMPQ/ref=mp_s_a_1_3?ie=UTF8&qid=1538615994&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=mackie+onyx+artist&dpPl=1&dpID=41g1YyxjwFL&ref=plSrch


https://www.amazon.com/Behringer-UMC202HD-BEHRINGER-U-PHORIA/dp/B00QHURUBE/ref=mp_s_a_1_3?ie=UTF8&qid=1538616381&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=behringer+u-phoria&dpPl=1&dpID=41LnZHDgziL&ref=plSrch

https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B01E6T56EA/ref=mp_s_a_1_3?ie=UTF8&qid=1538616639&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=scarlett+2i2&dpPl=1&dpID=41L6SD2-BwL&ref=plSrch

https://www.amazon.com/Steinberg-UR22MKII-2-Channel-USB-Interface/dp/B017MVUAHM/ref=mp_s_a_1_3?ie=UTF8&qid=1538616711&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=steinberg+interface&dpPl=1&dpID=41NuXCXoVGL&ref=plSrch

For a DAC/Amp combo, I suggest the following:

I personally own this and it is great.
https://www.amazon.com/Micca-OriGen-G2-Resolution-Preamplifier/dp/B01N14SY65/ref=mp_s_a_1_1?ie=UTF8&qid=1538616843&sr=8-1-spons&pi=AC_SX236_SY340_QL65&keywords=origen+g2&psc=1

https://www.amazon.com/FX-Audio-Optical-Coaxial-Amplifier/dp/B072JJT7SF/ref=mp_s_a_1_8?ie=UTF8&qid=1538616970&sr=8-8&pi=AC_SX236_SY340_QL65&keywords=dac%2Famp&dpPl=1&dpID=41iOCuvyjdL&ref=plSrch

http://www.schiit.com/products/fulla-1


https://www.massdrop.com/buy/massdrop-o2-sdac-dac-amp

or this:
http://www.schiit.com/products/magni-1
plus this:
http://www.schiit.com/products/modi-1

u/errorcache · 2 pointsr/indieheads

Generally, cheaper interfaces will have worse preamps and lower bit-depth/sampling rate capabilities (try to shoot for min 48kHz/24-bit).
Behringer's interfaces with midas preamps are quite good for how cheap they are. Something like this would be good enough for pretty much anything except recording drums https://www.amazon.com/Behringer-UMC202HD-BEHRINGER-U-PHORIA-2-Channel/dp/B00QHURUBE

u/kyL0h · 2 pointsr/Twitch

personally i'd probably go with a scarlett solo or 202hd amp and a e835 or sm58 mic around that price point; i'm a bit of a dynamic mic fanboy though

u/seldomstatic · 2 pointsr/AudioPost
u/Kristoffer__1 · 2 pointsr/audiophile

I'd not get a dac, what you want is an audio interface.

Like for example something like this. (I've got no idea if that one is actually good or not but it's got separate volume control for headphones and speakers which is incredibly useful if you use both.)

u/AvgKirch · 2 pointsr/Twitch

$60 USD Samson Q2U: https://www.amazon.com/dp/B001R747SG/ref=cm_sw_r_cp_apa_i_PYRxDbX6NHYK4

$96 USD Behringer UMC202HD:
https://www.amazon.com/dp/B00QHURUBE/ref=cm_sw_r_cp_apa_i_p3RxDbKEGEK61

Look at the manufacturer website for accurate information about specs. The Amazon listing for the 202 had info about the 404 model.

u/BearArmsMcGee · 1 pointr/Twitch

I'm going to look more into the ATR2100 or another dynamic mic.


The Behringer U-Phoria you mentioned earlier is just $30 on Amazon right now. From the review it seems like it's pretty decent assuming that you get a functional one (and if not Amazon has good return policies). I'm guessing the scarlet one is much better but not sure if its 3 times the price better.


Edit: or were you referring to the other u-phoria thats $60. And here's the $30 one

u/NicholasTheGr8t · 1 pointr/edmproduction

Behringer UMC202HD worked out great for me.

u/acastrov9 · 1 pointr/audioengineering

There is, i picked that one up, i appreciate your help nonetheless!

u/zazathebassist · 1 pointr/podcasting

Are you guys planning on recording in person?

If you can scrape together just a bit more money, I'd really recommend something like the Blue Yeti. Mainly because you can set it to bi-directional mode, so you and your friend can sit on either side of the mic and get clear audio without having too much interference.

https://www.amazon.com/Blue-Yeti-USB-Microphone-Blackout/dp/B0170NWLWY/ref=sr_1_3?s=musical-instruments&ie=UTF8&qid=1526020706&sr=1-3&keywords=blue%2Byeti&th=1

I honestly would not recommend that pack you found. The mic is fine, but you can find that same mic by itself for less than $20. USB to XLR cables are notoriously bad. And the Neewer NW-800(or whatever brand this mic is, they're all made in the same factory) is a cardioid condenser mic, which means it'll pick up audio really well and clearly right in front of it, but anything to the sides or back will be very quiet and not full.

Also, just so you're aware, Windows REALLY doesn't like more than one USB mic connected at the same time, so if you guys want to move to having two separate mics you will eventually have to get an interface. You can get something like a Behringer UMC202 and two microphones(something like Pyle PD58) if you have the budget for that, and then upgrade your mics down the line.

Behringer Audio Interface: https://www.amazon.com/Behringer-UMC202HD-BEHRINGER-U-PHORIA/dp/B00QHURUBE/ref=pd_lpo_sbs_267_t_0?_encoding=UTF8&psc=1&refRID=XVYQ6F57F9J89M61B16E

Pyle Mics: https://www.amazon.com/Professional-Unidirectional-Microphone-Connection-PDMIC58/dp/B003GEBGA0/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1526021122&sr=1-1&keywords=pyle+pdmic58

u/BreckEisner · 1 pointr/Twitch

Yeah I love using contact and the many VSTs xD, it does make it very easier! The pathetic part is that Yamaha won't obviously allow their VSTs to be made public...

I have this box, but it only has one, which is already being used for the mic so I suppose I should upgrade to the 2 port then lmao... though I'm not sure what connectors I should use

So I upgrade to this right to get my 2 inputs, one for my mic and the piano

https://www.amazon.com/Behringer-UMC202HD-BEHRINGER-U-PHORIA-2-Channel/dp/B00QHURUBE/ref=pd_sbs_267_t_2/146-5736008-6915446?_encoding=UTF8&pd_rd_i=B00QHURUBE&pd_rd_r=0f466cf2-954f-4085-99f8-a8a20728e992&pd_rd_w=Fj18b&pd_rd_wg=TUkBe&pf_rd_p=5cfcfe89-300f-47d2-b1ad-a4e27203a02a&pf_rd_r=970MDR9Q4DCP76NKFNYF&psc=1&refRID=970MDR9Q4DCP76NKFNYF

then I buy a specific cable fuckery for it, XLR to Stereo 1/4 and it should play the song from that port and thankfully my piano has a headset jack I can listen on it as well.

https://www.amazon.com/Tisino-Balanced-Signal-Interconnect-Quarter/dp/B07J5R4873/ref=pd_bxgy_267_img_2/146-5736008-6915446?_encoding=UTF8&pd_rd_i=B07J5R4873&pd_rd_r=111abeed-fe76-4bd3-9c47-5175282db911&pd_rd_w=bjUad&pd_rd_wg=d0UOA&pf_rd_p=09627863-9889-4290-b90a-5e9f86682449&pf_rd_r=9AT573D122QY4B77S17X&psc=1&refRID=9AT573D122QY4B77S17X

Do you think I should get one of the sound cards or some audiophile shit I can't remember what it's called, but it basically enhances the sound... I'm not sure at any rate

u/MountainManGuy · 1 pointr/ultrawidemasterrace

On the left

Yamaha RX-V377
On top of the Yamaha is a Behringer UMC202HD
The mic is a Shure SM7B

On the right side of the desk is my HP docking station for my work laptop. I work from home a lot so it's nice to have a dock.

In the middle there is an Infinity center channel

I've got 4 of these, front left and right and rear left and right

Using a spdif connection from my motherboard to the receiver.

The subs are two of these.

Keyboard is this

As of tomorrow, mouse will be this

And this huge ass mouse mat

u/11235813213455away · 1 pointr/buildapcsales

Depends on what you're going to use it for. It completely will work for making that mic clearer and louder, and provides phantom power. If you intend to record audio and care about the quality, you might want a more expensive one as they'll support higher bitrates. For streaming and discord though it'll be fantastic, especially at that price. I have this one as well and it sounds identical to the cheaper version, just with one less port.

Keep in mind that it requires you to plug it in with an XLR cable, so add one of those too if you don't have one.

u/ChrisG615 · 1 pointr/podcasting

You need something like this then.

BEHRINGER U-PHORIA UMC202HD https://www.amazon.com/dp/B00QHURUBE/ref=cm_sw_r_cp_api_fiCLzbWDM60Y6

u/_damnfinecoffee_ · 1 pointr/battlestations

Shit magni + modi, both second gen, driving some HD650's. The other interface is the Behringer UMC202HD driving some random old XLR mic. I'm looking to upgrade the dac, amp, and mic during black friday/cyber monday.

u/verticaluzi · 1 pointr/makinghiphop

TL:DR Help me choose my first setup. Dynamic vs Condenser.

I’m looking for my first microphone, to start recording over free trap beats I find on the internet.

Both of these are in my price range. I’d like to point out that the Shure SM58 is a dynamic and the AT2020 is a condenser.

I’m struggling to decide because I’ve read that a condenser picks up more details which is good, however my bedroom isn’t sound treated. You can hear the very gentle buzzing of electrical appliances, the faint rumbling of the hot water pipes, and the wind against the side of the house.

I’ll be picking up the XLR versions, and will be buying either the Behringer UMC202HD or the Focusrite Scarlett Solo . If you have experience with either of these, feel free to comment.


u/1stPiece · 1 pointr/buildapcsales

ok so shopping list is:

The two Monitors

XLR to RCA adapter (https://www.amazon.com/Monoprice-Connectors-Shielded-Oxygen-Free-Conductors/dp/B001UJH0XU?th=1)

Audio interface (https://www.amazon.com/Behringer-UMC202HD-BEHRINGER-U-PHORIA-2-Channel/dp/B00QHURUBE)

USB cord for amp.

Does this look like a decent setup?

u/the_blue_wizard · 1 pointr/audio

Hopefully I did help. Sometimes a person can be put off by information overload. But you do have options from FREE to about $150.

It will depend on whether you want to record on a Stand-Alone Device like a Smart Phone or Digital Recorder, or whether you want to record directly to a computer using a separate USB Microphone.

There are also USB Interfaces that could be used. These are USB to the Computer, but use standard common XLR Microphones. If that interest you, I could explore that option. I would guess a simple USB Interface with a good XLR Microphone would in the neighborhood of about $100 to £150 for both.

Just to dgve you and overview, though there are many more options, here is a simple Single standard Microphone USB Inferface from Behringer -

https://www.amazon.com/Behringer-UMC22-BEHRINGER-U-PHORIA/dp/B00FFIGZF6/

Here is a similar Behringer Model with TWO Standard Microphone Inputs -

https://www.amazon.com/Behringer-UMC202HD-BEHRINGER-U-PHORIA-2-Channel/dp/B00QHURUBE/

A Standard XLR microphone would be cheaper than a USB Mic. Here are some examples -

https://www.parts-express.com/cat/vocal-microphones/765

Going direct into the USB of a Computer, I would expect this basic setup to be pretty good, though you would need a microphone stand to mount it all on -

https://www.parts-express.com/talent-all-in-one-usb-home-recording-studio-vocal-booth-usb-mic-shock-mount-pop-fil--233-090

Microphone Stand - (not that expensive) -

https://www.parts-express.com/cat/microphone-stands/747

As to the noise, as has been indicated, you just have to work on finding an environment that has low noise, and record close to the mic, and if possible use Uni-Directional Mics, one direction or cardioid. Though in a quiet room with somewhat close mic'ing, an Omni-Mic as found in most Cell Phones and Digital Records will still get the job done.

Part of the problem is that there are so many ways to accomplish the same task depending on how complex and expensive you want to make the task. Hopefully, it nothing else, you understand the range of options available.

Let's us know what you decide and how it works out. That could be very helpful to others who might come along with a similar problem and read this thread.

u/ZettaTangent · 1 pointr/audiophile

Me and my brother play online games in the same room, and voice communication has always been an issue. We share a Blue Snowball right now but because it has to sit between us, it's too far to be anything but passable and using individual mics usually causes the echo of doom.

So I've been doing research and this is my plan.
I buy two Audio Technica AT2020 XLR Microphones with all the fixins' and I connect them both to the same audio interface and output to a single computer.

I do not have much experience doing anything like this, so my question is will this work? Will connecting these mics together prevent weird / disruptive echos?

u/SpursGuy90 · 1 pointr/podcasting

So just stick with the UMC202 I mentioned in the original post. this one

u/BeguilingOrbit · 1 pointr/podcasts

Doesn't sound like your co-host's mic is being picked up. You could download Voicemeeter and get both mic's to be picked up by Audacity, but they'll both be on a single channel. The better option is to by a $59 2x2 digital audio interface and plug the mics into that with XLR cables.

u/jacobchapman · 1 pointr/VIDEOENGINEERING

Another option you could try would be to feed the XLR mic lines directly into Wirecast (bypassing the C300/SDI lines entirely) via 2-input audio interface. Doesn't have to be fancy, something like the Behringer UMC202 would do you just fine.

u/hot_pepper_is_hot · 1 pointr/audioengineering

you should get a dBx 286s channel strip ($200.) and a Steinberg UR12 or UR22 interface. ($100.-$200.) or a Behringer ($60.) or Audient interface. Mic into dbx. Line level out of dbx into interface. Interface connects to computer via usb. Which mic? not that big of a deal. You could get an sE Magneto ($99.) or a GLS ES-57 ($37.) https://www.amazon.com/GLS-Audio-Instrument-Microphone-ES-57/dp/B001W99HE8 or try plugging anything you like into the dBx unit. go get a flea market or pawnshop mic. you might be surprised. pawn shops are stacked with used LDC's that they can't sell.

basically for $3-400. you can have a versatile and very pro rig. (??) get shrewd and second hand and do it for half that. the main thing is the dbx 286s.

-as always read the number of stars in the reviews. keep it 4.5 or better out of 5.

u/mymaloneyman · 1 pointr/buildapcforme

You know what, I'm a moron. What's the advantage of having an external soundcard over the internal? My original plan was to get the sound card in the OP as well as this Behringer external for audio recording, but I have no idea what I'm doing.

u/RawAustin · 1 pointr/letsplay

Nice pick there! I'm not sure if this is the one you where talking about but it's nowhere close to 70 bucks, although it's still 'under 100$' so it's certainly viable.

Thanks!

u/CharlesWiltgen · 1 pointr/podcasts

You'll want two mics. Ideally, you'll get two inexpensive mics and an audio interface. Something like:

  • Audio interface: https://www.amazon.com/dp/B00QHURUBE/
  • Mics: https://www.amazon.com/dp/B000NJ2TIE/
  • Monoprice for XLR cables, monitoring headphones (Monoprice 8323s), etc.

    Alternatively, you can start with two USB microphones. USB mics have audio interfaces built in, but since hardware clocks aren't in perfect alignment, the audio from one or both will need to be continuously "resampled" by the computer to keep sync. It's not the end of the world, but it's not great either.

    If you go this route, get two Knox KN-UM01s ($40 each). They're ATR2100 clones and apparently made in the same factory. Like the ATR2100 they're dynamic mics, which tend to be friendlier than more-sensitive condenser mics.

    Post back if you have questions!
u/raistlin65 · 0 pointsr/audio

Sometimes the only way to eliminiate noise like that is to use a USB interface, like this https://www.amazon.com/BEHRINGER-Audio-Interface-1-Channel-UM2/dp/B00QHURUBE?th=1

u/SamBBMe · -1 pointsr/headphones

I would advise this. it measures better than a modi and is cheaper, plus it wouldn't look out of place in an office.