Reddit Reddit reviews Bessey BPC-H34 3/4-Inch H Style Pipe Clamp, red

We found 18 Reddit comments about Bessey BPC-H34 3/4-Inch H Style Pipe Clamp, red. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Hand Tools
Clamps
Power & Hand Tools
Pipe Clamp Tools
Bessey BPC-H34 3/4-Inch H Style Pipe Clamp, red
H-Shaped Foot Assembly Stabilizes The Clamp In Two Dimensions Giving Dual-Axis StabilityExtra High Base Provides Industry Leading Clearance From The Work SurfaceCast Jaw For Durability2 soft jaw caps are included to prevent damaging materials being clampedZinc plated clutch components, black oxide coated threaded spindleH style base prevents clamps from tipping overCrank handle clears work surface when opening and closing the jaw on the clamp4 soft jaw caps are included to prevent damaging materials being clampedDurable powder coat finishZinc plated clutch components, black oxide coated threaded spindle
Check price on Amazon

18 Reddit comments about Bessey BPC-H34 3/4-Inch H Style Pipe Clamp, red:

u/Audisans · 14 pointsr/billiards

Weekend woodworker here. This looks reparable, assuming you can get a few clamps on either side of the piece to hold it together while you glue it.

For glue, use Franklin International 1414 Titebond III Ultimate.

For clamps, use some Pipe-style clamps, like these. You'll need a clamp for every 6" or so of the crack.

If you have an air compressor or a can of air, like you use for cleaning computer parts, blow out anything that is in the crack. Probably will have some dust and small wood particles you want out before you glue it down.

Fill it with glue, clamp it down, and let it set for at least 24 hours and don't even look at it. Then, release your clamps and it should hold tight.

u/crimpy · 5 pointsr/woodworking

Where are you people buying any pipe clamp for less than $20.00? Heads are $17 : http://www.amazon.com/Bessey-BPC-34-4-Inch-Style-Clamp/dp/B0012YNJRO and then you have to buy the pipe. Black iron pipe is waaayyy more than 5 bucks.

u/eatgoodneighborhood · 3 pointsr/woodworking

Look for a lumber yard around your area. Purchase plain-sawn lumber and take it to a milling company to have it thickness planed. Otherwise, check the 'materials' section of craigslist or just go to Home Depot.

If you want to make a dining table you will need clamps for the table top, unless you breadboard the ends and don't glue the long edges together. I personally like pipe clamps and buying kits and pipe at a hardware store is a fairly inexpensive way to get a bunch of pipe clamps for not much money.

Every tool I own I purchased off craigslist, or a yard sale.

u/makes_things · 3 pointsr/woodworking

Yes, those are pipe clamps:

https://www.amazon.com/Bessey-BPC-H34-4-Inch-Style-Clamp/dp/B0012YNJRO/

Best option BY FAR to get a long clamp on the cheap. You can also put out a tremendous amount of force with them. Great addition to any shop.

u/Na3s · 3 pointsr/woodworking

Bessey BPC-H34 3/4-Inch H Style Pipe Clamp https://www.amazon.com/dp/B0012YNJRO/ref=cm_sw_r_cp_api_tSy0xbFR9STT9

$15.00

10ft- 3/4in black pipe- $13.99 at Home Depot

That $30 for a 10ft clamp

u/Windkull · 3 pointsr/woodworking

If I was starting from scratch I'd first get:

https://www.amazon.com/dp/B01LW80Y0J/ref=biss_dp_t_asn

At $9.8 a clamp for 330lb pressure quick clamps they're great. Not quite as nice as the heavy duty Irwins because each squeeze doesn't move them as much but for the price I'd go with the Yost.

https://www.amazon.com/Yost-M7WW-Rapid-Acting-Working/dp/B00SIQ1DDG/ref=pd_sim_328_2?_encoding=UTF8&refRID=BKJ5FP839P8N1FH21F8T&th=1

That vise is a pretty nice deal right now too.

Probably 2 packs of these but they'll take forever to arrive:
https://www.amazon.com/Jet-70460-2-Parallel-Clamp-Pack/dp/B000UBIXD0/ref=pd_sim_328_1?_encoding=UTF8&psc=1&refRID=BKJ5FP839P8N1FH21F8T

I'd get maybe 8 of these, and pipe from the home center:
https://www.amazon.com/Bessey-BPC-H34-4-Inch-Style-Clamp/dp/B0012YNJRO/ref=pd_sim_469_10?_encoding=UTF8&psc=1&refRID=ECFV96CT5EFKCBM4BQW1

Go to the home center for the current deals on the Bessey F style bar clamps, or HF specials, I don't think I can live with less than 8 of those.

And I'd say 6 of these:
https://www.amazon.com/dp/B0713YHP6Q/ref=biss_dp_t_asn

Based on current pricing I'd go with the Yost, but my personal favorite are the Jets. After getting the hang of the Yosts I honestly like them more than K body Revos from Bessey because they tighten faster and harder. However they have a bit of slop and you have to kinda nudge them to get them to bite, which was frustrating the first time I used them.

And there I've just spent $800 for you :)

Depending on what you make, corner clamps, miter clamps, twin screw wood clamps, dovetail/fence/drill press clamps, toggle clamps for jigs, track clamps for track saw, C clamps, pocket hole clamps etc.

Edit: pricing this out made me notice I've spent well over $1k on clamps... That list is probably barely half my clamps not even...

u/steve98ex · 2 pointsr/woodworking

I'm in a similar situation, just bought a dw735x and I am hoping to make a cutting board by Mother's Day. Like you I didn't have enough clamps. I ran across a pretty good deal on amazon and now I have plenty of clamps for a cutting board. Just have to pick up some pipe from a hardware store.

Here's the link http://www.amazon.com/gp/aw/d/B0012YNJRO/ref=mp_s_a_1_1?qid=1398484165&sr=8-1&pi=SX200_QL40

u/-Dakia · 2 pointsr/woodworking

Looks like these. Naturally, you have to buy the pipe locally.

u/sourdoughbred · 2 pointsr/woodworking

There are definitely disadvantaged as you pointed out. I've heard of people just using blue tape to keep the clamp from touching. I've always kept a roll of wax paper on hand.

However, if budget is a concern, it's hard to justify $50+ for one clamp when you could get a set of 5' 3/4" pipe clamps for $45. Half the price is a big difference if you're just starting out and need a good amount of clamps to make something.

http://www.amazon.com/Bessey-BPC-34-4-Inch-Style-Clamp/dp/B0012YNJRO/ref=sr_1_1?ie=UTF8&qid=1408649466&sr=8-1&keywords=bessey+3%2F4%22+pipe+clamps

http://www.homedepot.com/p/Mueller-Streamline-3-4-in-x-10-ft-Black-Steel-Pipe-584-1200HC/100540481

u/PillPod · 2 pointsr/woodworking

The Bessey pipe clamps have been at that price for a while now, and they have little feet that raise the work off the floor/table/whatever the clamp is sitting on.

Home Depot

Amazon

And the Irwin version at Lowes is a little cheaper.

u/onesojourner · 1 pointr/woodworking

Craftsman Table Saw Model # $150


Shop Fox model #G8826 fence system $275


Freud P410 Premier Fusion 10-Inch 40 Tooth Hi-ATB General Purpose Saw Blade $80


Wilton 15” drill press $100


Parks 12” planer $600 This requires a little road trip

Atlas 6” jointer $150 Model #


Delta 10” bandsaw, Powerkraft radial arm saw and Rockwell contractor table saw $200
I would resell one of the tablesaws Just pick the nicest one and sell the other.


Oneway Multi Gauge $97 This is for setting the jointer perfectly and the dial indicator can be removed to make planer setting jig as described by Bob Vaughan (see youtube) or fine woodworking 107.


Angle block set for machine setup $30


Bessey Bar Clamps $14x3 plus maybe $10x3 for bars Say $75 total


Stanley sweetheart chisel set of 4 $80



This leaves $243 left for misc things like drill bits, planer/jointer knives or sharpening F style clamps a cordless drill, random orbit sander, sand paper ect.

u/bob493 · 1 pointr/woodworking

Yeah, I dont mind their pipeclamps. I've purchased a few HF ones, had a couple fall apart, but the rest have lasted years actually.

That said, you can get bessey pipe clamps off amazon for almost the same cost. Those aluminum parallel clamps have had a 100% fail rate for me, so I'm done buying/recommending them.

https://www.amazon.com/Bessey-BPC-H34-4-Inch-Style-Clamp/dp/B0012YNJRO/ref=sr_1_1?ie=UTF8&qid=1522002867&sr=8-1&keywords=bessie+pipe+clamp

u/t2231 · 1 pointr/woodworking

Personally, I'd go with Bessey. The 3/4" fixtures are $12 each: https://smile.amazon.com/Bessey-BPC-H34-4-Inch-Style-Clamp/dp/B0012YNJRO/

Then head over to the local Home Depot or Lowe's and buy 10' sections of 3/4" black pipe. You can have a store employee cut the pipe and thread it for you. I'd buy two 10' pipes and have each of them cut into one 36" piece and two 24" pieces. Thread both ends, that way you can use a coupler if needed to extend the pipes. The 10' pipes should cost around $25 each.

You won't quite get to 10 clamps at a budget of $150, but you'll get pretty close!

u/MidvalleyFreak · 1 pointr/woodworking

Pipe clamps. They’re relatively inexpensive. They’re just the ends and you put them on a piece of pipe. You buy the pipe separately so the clamp can any length you want it. Typically black iron or galvanized pipe, 3/4” - 1” depending on the size of the pipe clamp. The nice thing about pipe clamps is you can get one set and then just multiple lengths of pipe and swap them out depending on how long you need them. The should have them at most big box hardware stores. Very handy, especially when you need long lengths.

Here’s an example

u/Logosmonkey · 1 pointr/woodworking

Bessey BPC-H34 3/4-Inch H Style Pipe Clamp https://www.amazon.com/dp/B0012YNJRO/ref=cm_sw_r_cp_apa_i_JsUvCbCP00DBD

I quite like these.