Reddit Reddit reviews Bits Limited LCG-3MVR Energy Saving Surge Protector with Autoswitching Technology, 10-Outlet

We found 21 Reddit comments about Bits Limited LCG-3MVR Energy Saving Surge Protector with Autoswitching Technology, 10-Outlet. Here are the top ones, ranked by their Reddit score.

Accessories & Supplies
Electronics
Surge Protectors
Power Strips & Surge Protectors
Bits Limited LCG-3MVR Energy Saving Surge Protector with Autoswitching Technology, 10-Outlet
Ten-outlet surge protector with four-foot cordRight-angle plug keeps cord close to the wallAutomatically turns off power when not in use to help save energySuperior EMI/RFI filtering to 52dBBacked by a full two-year warranty for defects
Check price on Amazon

21 Reddit comments about Bits Limited LCG-3MVR Energy Saving Surge Protector with Autoswitching Technology, 10-Outlet:

u/willfe · 14 pointsr/Frugal

Gladly! Here is the model I use in my apartment. A touch on the pricey side, but worth it IMO. They make bigger ones too, but I haven't had the need for them yet.

u/ack154 · 7 pointsr/technology

Here you go: http://www.amazon.com/gp/product/B0006PUDQK/ (this specific one is no longer available, sadly)

I have a smaller one in our bedroom for a similar setup. No complaints. Of course, couldn't tell you if any money is REALLY saved or if it has paid for itself yet. But the theory is sound.

If you search for "smart strip" or smart power strip or something like that, there are a few others out there.

u/iterative · 4 pointsr/AskElectronics

If you're content with the form factor and such, there are products that already do this:
http://www.belkin.com/us/F7C007-Belkin/p/P-F7C007
http://www.amazon.com/Smart-Strip-Protector-Autoswitching-Technology/dp/B0006PUDQK/

I suspect they sense the current draw with a current transformer:
https://en.wikipedia.org/wiki/Current_transformer

u/kendiara · 4 pointsr/videos

Or stuff like this. We have one connected to the game consoles. TV goes off so does the PlayStation.

u/Dumplingman125 · 3 pointsr/pcmasterrace

Here you go. I don't have this exact one, and although they're quite a bit more expensive than normal power strips, mine has survived many storms that killed other strips in the house.

u/cubical_hell · 3 pointsr/audiophile

There are power strips that have master / slave options. It will give power to an outlet after it senses a power draw from the master.

If your appletv was the master, it would power on the amp when it comes on.

http://www.amazon.com/Smart-Strip-Protector-Autoswitching-Technology/dp/B0006PUDQK

u/deal_with_it99 · 3 pointsr/Electricity

I’d s try an smart strip first before bringing in an electrician to solve the problem. See if that solves your issue first.

Maybe something like this: Smart Strip LCG-3MVR Energy Saving Surge Protector with Autoswitching Technology, 10-Outlet https://www.amazon.com/dp/B0006PUDQK/ref=cm_sw_r_cp_api_ybNOBb1X7NFK8

u/TheThirdStrike · 2 pointsr/retrogaming

I got this one from Amazon.

But there are a lot that are cheaper

u/GeckoDeLimon · 2 pointsr/diysound

They make surge protectors that switch some of the outlets based on whether one main device is plugged in and powered on. Plug the receiver / preamp into the main, and then plug the Behringer (or a 12v wall wart connected to the trigger port) into one of the slave outlets.

Edit: Here's a popular one.

u/ablaize · 1 pointr/raspberry_pi

Not sure if this would work for what you're trying to do, but we use a similar autoswitching power strip for our entertainment center. TV plugs into the control, router/modem plugs into always on, and everything else gets switched off when the tv turns off. Hands off functionality and no vampire current draw.

u/ZeosPantera · 1 pointr/htpc

I have done this numerous times and you can put as large a fan as have the ability to cut out. The top rear of the cabinet will be best and shouldn't affect the TV.

Look through your old electronics for a 12V transformer you can butcher or output from the PC. The xBox probably only heats up when running but the DirectTV box likely runs hot all the time. You can look at buying a Smart power strip like this and tell the fan to run only when the TV is on.

If you had a receiver, some models have switched outlets to turn on equipment when it is running. (Check your direct TV box for this as well) But that would only turn it on with the cable box which you might not run with the PC.

u/electrodan · 1 pointr/Guitar

I use one of these, I have my amp set as the "control" and my pedal board plugged in to one of the switched outlets.

It might not be the best of you have a ton of pedals, but for my home setup it works great and I can use the other "hot" outlets for other stuff like charging my phone etc.

u/LJHalfbreed · 1 pointr/cade

Yeah, I use something kinda similar to this: Autoswitching Strip Thingie

Rig the Pi/PC/etc with an external switch, and then plug it into the 'master outlet'. When you power on the Pi, that triggers the other outlets into powering up, and then your monitor, speakers, marquee, etc all power up. Pretty nifty.

u/tooclosetocall82 · 1 pointr/hometheater

Your speaker need to be powered somehow. Once you have the figured out you could try a smart power strip like this: http://www.amazon.com/Smart-Strip-Protector-Autoswitching-Technology/dp/B0006PUDQK

u/artoink · 1 pointr/electronics

Get a Smart Surge Protector.

It has a master outlet that triggers the rest of the outlets.

u/MankYo · 1 pointr/hometheater

Energy-saving power strip:

https://www.amazon.ca/Energy-Protector-Autoswitching-Technology-10-Outlet/dp/B0006PUDQK

Many different models to choose from in that product category.

The idea is that you connect your AVR into an always on "main" or "control" outlet (or whatever it's labelled on the specific product), and the other components like CD players into the "secondary" or "switched" outlets that are controlled by the main outlet. The power strip senses more current going through the main outlet when the AVR is on, and then turns on power to the secondary outlets. When the AVR turns off, the power strip senses the current drop, and turns off power to the secondary outlets.

u/michelework · 1 pointr/electricians

They are called smart strips.


amazon link for purchase

u/tomgabriele · 1 pointr/htpc

I think it would be simpler to get a power strip like this (edit: or here's a cheaper one), which switches certain outlets on and off based on the power draw from another outlet.

For your situation, you could plug your monitor (edit: or TV, as the case may be) into the control outlet, so that when it turns off, the outlet that the receiver is plugged into turns off as well. Then when it turns back on, the receiver gets power again too.

I am struggling to come up with the right term for the product, I thought it was 'smart power strip', but that phrase seems to be getting muddied by IoT-type power strips.

Belkin also makes a power strip with a remote switch, which would make shutting off the monitor and receiver and whatever else easier, but not automatic.

As far as I know, there is no way to send Harmony commands from a computer if you went with a Harmony Hub