Reddit Reddit reviews BN-LINK Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding Incubation Greenhouse, 40-108°F, 8.3A 1000W ETL Listed

We found 34 Reddit comments about BN-LINK Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding Incubation Greenhouse, 40-108°F, 8.3A 1000W ETL Listed. Here are the top ones, ranked by their Reddit score.

Pet Supplies
Reptiles & Amphibian Supplies
Terrarium Heat Lamps & Mats
Terrarium Heat Mats
BN-LINK Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding Incubation Greenhouse, 40-108°F, 8.3A 1000W ETL Listed
✓ EFFORTLESS HEATING SETUP: Simply set the temperature probe, plug-in the controller, and use the large 3-button interface to choose your desired temperature setting. Digital display supports units in both Fahrenheit and Celsius. Note: the controller is designed to have a 2-3 degree buffering zone before powering on again after reaching set temperature.✓ EASE OF MIND: Handy LED heating and power indicator lights allow you to see the controller’s status even in total darkness. Controller features a convenient hanging tab, and a bright, easy-to-read display inside a tough plastic housing.✓ RUGGED CONSTRUCTION: The cord for the temperature probe and grounded 3-prong plug measure an extended 6 feet in length, designed to suit almost any application you can imagine.✓ VARIETY OF USES: Our thermostat controller can be used for seedling germination, rooting, brewing, heating, fermentation, and more, keeping your various environments in their ideal temperature range.✓ SAFE & RELIABLE: Our thermostat controller is ETL listed, and rigorously tested for quality control and safety. Conforms to UL Std No. 60730-1, 60730-2-9. Temperature control range is 40-108°F, temperature display range is 32 -140°F. Rated Voltage is 120VAC 60Hz, Max Loading: 8.3A 1000W. Do not immerse controller or probe into water.
Check price on Amazon

34 Reddit comments about BN-LINK Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing Breeding Incubation Greenhouse, 40-108°F, 8.3A 1000W ETL Listed:

u/angelicsnake · 4 pointsr/snakes

pet stores are actually known to NOT (or rarely) carry thermostats, which is one of the reasons why a lot of people don't know you need them.

you can buy them on amazon, pay for fast shipping (this one is widely used)

same for the gun, any cheap one is fine (i use this one)

if you can only get one, definitely get the thermostat as it's one of the most important things

so at petsmart just pick up hides and the aspen bedding. ideally both hides should be the same. get a hide that looks pretty small! you would be surprised at how small my hides are compared to how big my snake is. they can really squeeze in there and feel secure. if the hide is too big, it won't make them feel safe.

i would recommend joining this forum, there are a ton of people there who have been keeping snakes 10+ years who can better answer your questions.

u/brainstorm11 · 3 pointsr/snakes

Hello everyone,

Earlier this week I got my first snake, which was a female western hognose. Unfortunately, the previous owners seem to have provided lackluster care (here was the tank, bedding etc she came in).

I have since purchased a 40 gallon tank, got new bedding, purchased 2 hides, added a larger heating pad, light lamp, and have a thermometer I'll be installing on the heat lamp...

...but 24 hours after transferring the snake to her new tank, she hadn't shown herself at all.

At first she explored her new, larger surroundings. But then she buried and I didn't see her. Worried, I just found her on the cooler non-lit/non-heated side still not moving much (and generally not happy with my bothering her).

Concerns:

Here is a picture of the new setup. I used this ReptiChip substrate (coconut husk), which I'm a bit anxious about because it specifically mentions pythons and boas, not a hognose. I followed their instructions using water to expand the chips and add some moisture, but the moisture is collecting in the tank (picture at the base here).

When I tried to find her in the substrate, I noticed a small flying insect similar to a gnat. Not sure if this is relevant or this is just something I should watch out for.

  1. Is the moisture collecting at the base of the tank a problem?

  2. Is it normal for a hognose to spend time buried and feeling "anti-social" when first moved to a new environment?

  3. Is this substrate okay? I only read after purchasing the ReptiChip that hognose may prefer shredded aspen.

  4. What's the temperature for the heading pad and lighting area (I see this called a "basking area")? In the link above I see 90 degrees F

  5. I got this thermometer. Is there anything else (humidity checker) that I need to purchase?

    Many thanks for all y'alls help. I apologize for my ignorance. In posting this (and quickly purchasing more/better products), I am doing my best to care for the animal.
u/theirishscion · 3 pointsr/BeardedDragons

I have two heating pads on the bottom of Renault’s tank, a high wattage (~17W) at the hot end and a low wattage (~10W?)in the middle. Both are thermostatically controlled though, with sensors inside the tank under the carpet and on the glass, so they kick on and off at preset temperatures to maintain the temperature gradient, and don’t let the carpeting get above a very safe temperature.

With that said, I think that might be overkill; the low wattage one simply cant get the floor too hot, and the bigger one even running full time during the day might not either. Possibly better safe than sorry.

This was the thermostat I chose; Century Digital Heat Mat... https://www.amazon.com/dp/B01I15S6OM?ref=yo_pop_ma_swf

I don’t know if they’re well respected or not; one of mine arrived dead, the other was fine. I popped the case off the dead one and re-soldered the resistor that wasn’t done right at the factory (I was in a hurry and didn’t want to faff about with a return) which fixed it. I will say they seemed well designed (very simple, but nice component choice) and that one resistor notwithstanding, well put together.

u/410cs · 3 pointsr/leopardgeckos

Slow money is better than no money! :)

​

Sorry for the delayed response. Here's some of my recommendations:

Jumpstart/Century Pulse Thermostat - $17 - Super reliable and cheap!

Slightly cheaper 'Repti Zoo' Pulse Thermostat - $16 I've had this one previously, the brand was different but it's the same model. I'd only choose this over the jumpstart if you are forced to - due to stocking issues etc.

- I can't seem to find many of the ones that we have in the UK on the Amazon US site, but Id' 100% recommend the jumpstart.

​

Also, you're gonna need two of them. I've heard of people using this product here ($36) to control two at once. Might be worth looking in to :-)

u/esppsd · 3 pointsr/Aquariums

https://www.amazon.com/dp/B01I15S6OM/ref=cm_sw_r_cp_apa_i_Lo-oDbPBMW1A8

Check this out. Plug your heater into it, and set the thermostat of the device to your maximum allowable temperature. Let's say, the heater is set to 78°, and the thermostat controller is set to 82°. The heater will function independently to keep the water at 78° because the controller is providing power. If the heater malfunctions and starts cooking, at 82°, the controller will turn off power to the heater, rendering it unable to boil your tank.

u/tato_salad · 2 pointsr/Homebrewing

i'd say too cold. you can also get an inexpensive seed mat for about $13 USD & Temp controller For $19 to help keep the heat up. Cooling require a fridge/mini fridge (withoutf freezer) and a cooling controller which costs a lot more.

I tend to ferment in 2 places. 1. my laundry room in the winter (because it's usually cold due to dryer vent / begin on exterior wall), and 2. My bathroom in the summer which has AC and is generally kept cool.

That being said.. As other have mentioned, warm yeast make off flavors, cold yeast just stop working and may go dormant. You're better off going cold and re-pitching / warming up than getting bad flavor where you toss your product because it's not good.

u/hghquality · 2 pointsr/snakes

Thank you for responding! I really want to know what I can do to help my snake, as I've been worried something is wrong..... I made a list with the exact things that I have bought!

I have this terrarium

https://www.amazon.com/gp/product/B008N9LRCK/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

and this heating mat on one half (covers around 40% of the tank)

https://www.amazon.com/gp/product/B07X8WLYD8/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

with this thermometer that controls the heat (max is 93 F) and cool side is 75-80

https://www.amazon.com/gp/product/B01I15S6OM/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1

and i made a humidity box (as shown by Youtube account SnakeEncounters) with this moss that I spray to make humid- I have seen my snake in there twice now, she likes to sleep there for a couple hours and leave.

https://www.amazon.com/gp/product/B07CX5QB82/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

and I use this hide (one on cool side, one on warm side)

https://www.amazon.com/gp/product/B07MVKJ3B1/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

and this bedding

https://www.amazon.com/gp/product/B0009KJ0A2/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

and I use these vines to make the enclosure feel more covered and less "open"

https://www.amazon.com/gp/product/B0009YEB70/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1

u/rollnwiththepunches · 2 pointsr/Kombucha

The nice folks at this reptile shop made the heat wrap. They installed the connectors for an extra buck. My wrap is 12 inches wide and 4 feet long. Here is a link. https://www.pangeareptile.com/store/thg-heat-tape-3.html

I have it plugged into a temp controller. https://www.amazon.com/gp/product/B01I15S6OM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

u/passive_paranoia · 2 pointsr/leopardgeckos

The heat mat is preferred, since leopard geckos absorb heat for digestion thru their tummies only. For all my tanks i use the zoo med reptitherm heat pads. You will want one that takes up between 1/4 and 1/3 of the bottom of the tank. I hook all mine up to one of these... https://www.amazon.com/dp/B01I15S6OM/ref=cm_sw_r_cp_apa_i_s9TUCb1WZ3HE7 i suggest also buying the heat pad off amazon as well, you will pay AT LEAST double if you buy at a brick and mortar store. As for the liner i just go to walmart and buy my liner there in the kitchen section.

u/llewoh · 2 pointsr/leopardgeckos

You could try giving him a bath! That might help. Also please avoid lights. They can eventually hurt your baby’s eyes! Only use heating pads. The pinned post on this sub goes into detail about thermostats, (https://www.amazon.com/Century-Thermostat-Controller-Germination-40-108°F/dp/B01I15S6OM this is the one I use) and you need one to regulate the temperature your heat pad gets to so your Leo doesn’t get too hot or cold.

(the pinned post is full of info and absolutely everything you’ll need to know/purchase to give your guy a happy and healthy life 😊)

Edit if you knew all of this already I’m super not trying to sound condescending, just trying to throw out some tips!!

u/heterodon_nasicus · 2 pointsr/reptiles

Most people recommend ball pythons, cornsnakes and kingsnakes (and those all are good choices), however it's ultimately up to you! For example, I got a red tail boa constrictor as my first snake and I've only seen one person recommend them as beginner snakes. And honestly, I was glad I got my boa, he's such a sweetheart and his care is very similar to a ball pythons, just on a bigger scale! Plus he's a reptilian garbage disposal, so I don't have to worry about him skipping meals.

I've also seen breeders recommend ratsnakes and gopher/bullsnakes because their husbandry is very easy and they're typically very good eaters. While they're known to be a little temperamental, regular handling will calm them down pretty quickly. I've also seen Kenyan sand boas and children's pythons reccomended, plus they usually don't get too big, and all the snakes I've mentioned come in various morphs so it would be fairly easy to find one thats to your liking!

Snake Discovery, Clint's Reptiles and Josser's Jungle are a very good start! They upload educational videos and they're extremely helpful with information and helping you decide what snake is good for you.

As for getting the actual snake, never buy from large chain pet stores. Always try to get them from a reliable breeder, and the best way to do that is reptile expos! You'll be able to find a bunch of different morphs of various species and you can get supplies and food for pretty cheap.

Another thing to keep in mind is the lifespan and the supplies they need. Bigger snakes need bigger terrariums which cost more, need bigger meals, etc. You will also need a heat mat or heat tape that's connected to a thermostat regardless of species. snakes are kinda dumb and will continue to sit on a warm spot even if it burns them, so thermostats are a must! I use this thermostat for all 3 of my snakes and it works great!

And don't forget to do lot's of research! Look into the snake species itself, it's temperature and humidity requirements, the tank/tub size, and whether or not there are any breeders or expos nearby! Anyway, I hope this helped in some way, and good luck!!

u/icky-micki · 2 pointsr/reptiles

that's what thermostats are for! you can get one here for a decent price. and here's how to set it up. (-:

u/TheWitchofWonderlust · 2 pointsr/snakes

Oh that’s what I meant, I have this one on its way

u/drus_geckos · 2 pointsr/leopardgeckos

Century Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing, 40-108°F https://www.amazon.com/dp/B01I15S6OM/ref=cm_sw_r_cp_api_i_-j6ZCbDTX6S1R

u/phidauex · 2 pointsr/fermentation

You might look into heating mats or submersible heaters commonly used for reptile terrariums and aquariums. The submersible ones need to be in water, but that could even just be a jar of water or a small tray, at the low wattage being discussed.

This heating pad controller for reptile enclosures (not endorsed, it was just the first one to come up for my search) has a temp sensor and thermostat: https://www.amazon.com/Century-Thermostat-Controller-Germination-40-108°F/dp/B01I15S6OM/

At low wattages, you can even use something like a 40W incandescent bulb on a dimmer switch.

For mini-fridge size enclosure, even 40W will get things very hot - I think even 5-10W, with a thermostat, will get you a lot of heat in an enclosed space.

u/Splatini · 2 pointsr/Hedgehog

You need the CHE on a thermostat not a timer. Something like this https://www.amazon.com/dp/B01I15S6OM/ref=cm_sw_r_cp_apa_vNOSBb4AW0Y8J

Note that I haven't used this exact one, so can't speak on its quality. The wattage just depends on how big of an area it needs to heat and by how much.

u/Herherpsnderps · 2 pointsr/leopardgeckos

They require 88f minimum on the cool side, ideally 90f for proper digestion. Since they're cold blooded they rely on the temperatures in their environment to do basic metabolic functions such as digest. So I'd recommend grabbing an under tank heater, a thermostat to control it, and maybe a decent little thermometer, sounds like you're using a wall dial that can be tough to read and are always inaccurate. Getting the temperatures right is really important for keeping reptiles, otherwise they can get sick or worse quickly, but luckily once you have those temps set they're easy to maintain. Woudl recommend just double checking the link under "basic care" down on our side bar, it can fill you in on a bit more like the calcium supplements they need as well. If you have any questions let me know! I'm going to add a few links to the items I'm mentioning

https://www.reddit.com/r/leopardgeckos/comments/9qig1m/gecko_belly_ive_had_my_gecko_about_two_weeks_and/

https://www.amazon.com/Century-T7-FBA_BNQ-T7H-Thermostat-Germination/dp/B01I15S6OM/ref=sr_1_1_sspa?ie=UTF8&qid=1540265142&sr=8-1-spons&keywords=reptile+thermostat&psc=1

https://www.amazon.com/Zoo-Med-Digital-Terrarium-Thermometer/dp/B000MD3MFA/ref=sr_1_6?ie=UTF8&qid=1540265132&sr=8-6&keywords=reptile+thermometer

u/KarmaChameliano · 2 pointsr/ballpython

It is possible. Reading through the comments in this post, I see that you just got your noodle. Congrats!

But that as well will play a huge factor. Little friend is stressed out. Just give it a solid week of no touching and no feeding attempts. After that give it another go.

As for the temp. I’ll give you some basic:

-Coconut shedding substrate (replace after a week so that your snake gets comfortable to its surroundings first)
-Thermometers/hygrometer at the bottom of the tank
-Plug the headpad into a thermostat

After your new friend has eaten;

-moisten the new coconut substrate by mixing water into it and mixing it all up with your hands. Leaving dry substrate under its hides. This will be great to help with humidity, which you will see if your house humidity isn’t high, will be a struggle.

My house has an average of about 44, so I have to mix my substrate about every 2 days. I’m going to be looking into other options down the road, as I have done all the home remedies and mixing is my best option.

Hope all of this helps!

Short answer: yes temp and humidity will affect your snakes feeding 🐍 🐁 lol


Edit: replace substrate after a week from today I meant. Not once a week.

Edit two: a chill mod in here once told me to cover the top screen with tin foil while mixing the substrate. Best tip ever. Plus if you do it right, it looks nifty. Just make holes for your heat lamp and ventilation. It’ll take some time to perfect. But not long. Kay I’m done now

u/bsmith0315 · 2 pointsr/ballpython

https://www.amazon.com/Century-Thermostat-Controller-Germination-40-108%C3%82%C2%B0F/dp/B01I15S6OM/ref=mp_s_a_1_2_sspa?keywords=heat+mat&qid=1567709698&s=gateway&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyT1RKTEFWSk1MUkdYJmVuY3J5cHRlZElkPUEwMDU3ODgwMUlJSzBRSklUMDlRRiZlbmNyeXB0ZWRBZElkPUEwODg2NjE0MTE0OFdDOU9XQklROSZ3aWRnZXROYW1lPXNwX3Bob25lX3NlYXJjaF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl

I suggest at least this ^ for your heat pad. You have to be very careful with them. Mine would get up to 120 degrees if it wasnt regulated with this. You set the temp for their warm side and put one of their hides over it. My girl doesnt go in there often cuz she prefers her cool hide. I keep warm side at 90 cuz she wouldnt even go in there with anything warmer. Her gradient is 79 to 90. Ambient temp is usually around 80. She has eaten every week I've had her (2 months).

u/LunalNalani · 2 pointsr/Snek

Also heat sources should be regulated, just thought of that. I use these: Century Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing, 40-108°F https://www.amazon.com/dp/B01I15S6OM/ref=cm_sw_r_cp_apa_i_CmqhDb9DC0KDT
If it's a heat mat, place the probe on the glass above the mat. If it is a heat light, place the probe inside their warm side hide. You can also use a light dimmer for lamps.

Sounds like my ball python when I got her. :) She was pretty tame from day one, I love her <3

u/muaddeej · 1 pointr/AnycubicPhoton

I just installed these inside my printer. So far, so good. I can keep the FEP and buildplate at a steady 75 degrees in a 45 degree garage.

https://www.amazon.com/gp/product/B01I15S6OM/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B07573FKSG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

I did have to FDM print an adapter to make it all fit. That's in a Mars. Not sure how it would fit in a Photon.

u/insurancefun · 1 pointr/CrestedGecko

So I use a ceramic bulb (because I didn't wan't light to mess with the day/night cycle). and I have this automatic thermostat controller which I have set to keep it around 74 in her enclosure. This set up seems to be working well.



Because night time is probably when it's getting cold in your house you'll need a ceramic bulb or another heat bulb meant for nighttime. So the UVB bulb probably isn't worth messing with.


u/Zehkitty · 1 pointr/reptiles

I use this with the standard zoo med or exoterra UTHs on three leopard gecko tanks and two snake tanks and have had good temperature accuracy with it

u/DarkMagicMonkey · 1 pointr/Sneks

Will one of these work as a thermostat for a CHE? https://www.amazon.com/dp/B01I15S6OM/ref=cm_sw_r_cp_api_i_xqFXDb0BTJFVP if I put the probe somewhere near the top?

u/ohmygobblesnot · 1 pointr/ballpython

If your in the US i recommend buying this https://www.amazon.com/Century-Thermostat-Controller-Germination-40-108%C3%82%C2%B0F/dp/B01I15S6OM/ref=mp_s_a_1_1_sspa?keywords=jumpstart+thermostat+reptile&qid=1570753836&sprefix=jumpstart+&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExMktDVDVZRk9GUDcmZW5jcnlwdGVkSWQ9QTA5ODc4MjcyUlpSWDNFTzQyUFFCJmVuY3J5cHRlZEFkSWQ9QTA3MjMyOTIyMkdLQlpNSllCTEZRJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU= and plugging in the under tank heater and setting it to 90-91 so you wont have to worry about the heat. Still always check that the high temp is around the number uou set it to but i notice that sometimes it can slowly get lower than what you set it to but then right back where it needs to be.

u/bitchnstitch · 1 pointr/Sneks

We use this one for the heat pad, you set it at the temp you want and it turns the heating pad on and off depending on if it gets too cool or too hot.

And then we use this one just to monitor visually the temp and humidity of the environment. So far we’ve had no issues and they’re both fairly inexpensive.

Good luck with everything!

u/crysisnotaverted · 1 pointr/reptiles

If it's that insanely cold inside I would use a 100w CHE in conjunction with 11 inch heat tape spanning the length of the bottom of the tank, possibly two strips side by side, controlled by a reptile thermostat with a temperature probe taped down in the tank directly over the heat tape on the bottom. That way you have a safe sustained temperature throughout the tank and the CHE can be used by your bearded dragon to effectively thermoregulate himself without needing to worry about cold spots.

​

Heat Tape

Heat Tape Power Cord

Thermostat for the Heat Tape

u/MacOnAnon · 1 pointr/Hedgehog

Century Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing, 40-108°F https://www.amazon.com/dp/B01I15S6OM/ref=cm_sw_r_cp_api_i_qPpvCb49PSBWM

This is the thermostat we use to control the heat, we have it connected to a regular ceramic heat lamp

u/Waooh1 · 1 pointr/ballpython

You’ll have to figure that out once it’s set up. It would work well on the hot side but if the cool side is too cold with nothing over there I would center it. That’s the thing I need to tweak but haven’t yet since I’m going to have to remake my custom lid. Lamp currently on the hot side but my cold side is like 5 degrees too cold. Not a huge deal but something I’ll need to get around to. Like I said trial and error id just buy all your heating elements and then spend a day messing around with temp and placement. Also this is a good cheap controller for the heat mat if you don’t have one yet.
https://www.amazon.com/dp/B01I15S6OM/ref=cm_sw_r_cp_api_i_r3e2CbAWWY9ZY
Just make sure the temp probe goes between the mat and glass

u/ratZ_fatZ · 1 pointr/yogurt

All you need is the slow cooker and a temperature control unit like this one or if your mechanically inclined the ITC-1000, and plug in the controller then plug the slowcooker into the controller then set the controller to desired temp and walk away.

But remember, you don't want the auto slowcooker. You want one like this with just a 3 way dial.

I set my slowcooker to low and the ITC-1000 to 112° for 5 hours, remove the yogurt and stick in the fridge.

u/Azrielenish · 1 pointr/leopardgeckos

Purchase a thermostat to regulate the temperature of the heat mat. I prefer this style but there are lots of different ones out there. In fact I recommend getting one anyway as they are an important safety feature to prevent temperature spikes.

u/tropicalmedly · 1 pointr/leopardgeckos

This is the thermostat I have: https://www.amazon.com/dp/B01I15S6OM/ref=cm_sw_r_cp_api_i_TbOBDbQPSF1RG

I saw it recommended on a thread here, so hopefully it’s okay! If need be I’ll go up to something fancier, but most people seem to use something along those lines?

u/MoistMedic · 1 pointr/LeopardGecko

The heat pad should be under the tank on the bottom to give some belly heat. Leopard geckos digest their food using belly heat so it would really help him out. The heat pad should cover about 1/3 of the bottom of the cage as well. Make sure to have a thermostat with the heat mat as well so it doesn't over heat your gecko! The one I use is this one and it's been working fantastic with no issues. I have the probe located in the spot where the gecko would lay down and when the temperature reaches the degree I've set it to, it'll shut off the mat allowing it to cool down and then it'll heat back up.