Reddit Reddit reviews Brady BMP21-PLUS Handheld Label Printer with Rubber Bumpers, Multi-Line Print, 6 to 40 Point Font

We found 7 Reddit comments about Brady BMP21-PLUS Handheld Label Printer with Rubber Bumpers, Multi-Line Print, 6 to 40 Point Font. Here are the top ones, ranked by their Reddit score.

Office Electronics Products
Label Makers
Other Office Equipment
Office Products
Brady BMP21-PLUS Handheld Label Printer with Rubber Bumpers, Multi-Line Print, 6 to 40 Point Font
Handheld printer with keyboard creates multi line labels for clear identification of wires, panels, circuit boards, and other industrial items, and has a tough exterior with molded rubber bumpers for impact resistanceKeyboard contains letters A to Z and numbers 0 to 9, and the text displays on the LCD screen as it is typedText prints in a single color and in 6 font sizes (6 to 40 point)Continuous tape cartridges (sold separately) enable labels of varying widthsSix AA alkaline batteries power the printer for portability
Check price on Amazon

7 Reddit comments about Brady BMP21-PLUS Handheld Label Printer with Rubber Bumpers, Multi-Line Print, 6 to 40 Point Font:

u/crankgoon94 · 119 pointsr/cableporn

Brady label printer

This is what I use for everything

u/argemene · 15 pointsr/electricians

I don't know about OP, but EVERYONE where I work uses the Brady BMP21 plus with their nylon cloth tape too. It's super resistant to oil and other general boatyard filth.

https://www.amazon.com/Brady-BMP21-PLUS-Handheld-Printer-Multi-Line/dp/B00IELD1O4/ref=mp_s_a_1_fkmr1_2?keywords=bp+plus+label+maker&qid=1573964535&sr=8-2-fkmr1

u/netw0rks · 2 pointsr/homelab

How expensive is expensive? I bought this for $98 and couldn't be happer. It does pretty much any kind of label. I used the self laminating labels when I redid my rack.

u/creamersrealm · 2 pointsr/cableporn

just bought a super nice Brady label maker: BMP21-Plus

Maker: http://www.amazon.com/gp/product/B00IELD1O4/ref=oh_details_o02_s00_i01?ie=UTF8&psc=1
Cable Labels: http://www.amazon.com/gp/product/B003XU7T4E/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1


Ive yet to open I had a bigger version at my previous job and it was awesome!

u/dirtyPirate · 2 pointsr/sailing

>I'm fairly ignorant of electric systems on boats.


I hope you're comfortable with how basic 12VDC electrics work and are asking about how to wire them in a marine environment.


Preface, I'm not a certified marine electrician but I've done a ton of work re-wiring, custom work on all kinds of sail and power boats.


Tools:
>I do have a cheap harbor freight multi-meter

good, now you're going to need a way to crimp those shitty connectors and some dielectric grease.


Unless of course you want to solder all your connections (this is my preference as it doesn't vibrate loose or corrode as quickly), then follow NASA's soldering method s and yuu'll need some rosin cored solder and and a soldering iron, you'll also need to use a crimp connector without the pre-molded shrink wrap and some heat shrink tubing


Ok... got your tools? great, now for supplies.


You'll need a buss bar on your ground


Measure how much wire you need, (are you re-wiring the mast?) and use 14/2 AWG marine grade wire.


If you're only using 1 battery you can get away with a simple switch like this. From the devices & lights you listed It sounds like you can use 10AWG to connect your battery to your switch then to the 14 gang panel.


You'll need a way to label your wires, I use one of these but if you're doing one job you might want to use something cheaper.

Ok... now on the to the fun part


Plan where you're going to mount your panel and pull a single RED 10AWG from there to your battery shut off switch and another strand from you battery to the switch.


Pull 10 AWG from the battery to the buss bar.


pull all the 14awg from the lights to the panel labeling each 14/2 wire as you go


red goes to the fuse block, black goes to the buss bar then to the negative on the gang block, label everything at the connection points, big red wire goes from battery switch to the bolt on the 14 gang, big black wire goes to the buss bar.


install new things, as each device is hooked up test the fuse and switch, then install the new thing.

Edit: I forgot to mention, use dielectric grease on all metal fittings to reduce corrosion.


edit 1: put a fuse between your battery and shut off ont the red wire

u/beigemore · 1 pointr/networking

I got one of these a few weeks ago and it has worked well. I got the lot version that comes with a rechargeable batter.

https://www.amazon.com/gp/aw/d/B00IELD1O4/

u/CapStudio · 1 pointr/homelab

Way more than the Dymo /u/crispychoc recommended (which is awesome for the price), but this Brady labeler has self-laminating labels which work well when labeling cables. Recently got one at work and been loving it.