Reddit reviews Caliber Trucks Cal II 50° RKP Longboard Trucks (Black)

Specs:

• 2x 6374 180kv motors
  
  
• MBS all-terrain wheels
  
  
• 2x pulley kit (36:13)
  
  
• 2x motor mounts
  
  
• Caliber II Trucks (I have wider Torqueboard 218 trucks coming so I can mount both motors inside)
  
  
• Antispark switch
  
  
• FSESC 200A
  
  
• 2x 6s 6000mAh Lipos
  
  
• Deck from a longboard I bought like 4 years ago
  
  
• Both enclosures were 3d printed with ProtoPasta carbon fiber and TPU washers that vary in thickness to compensate for the contours of the board (my own design).
  
  
• bearings
  
  
• Dual charger
  
  
• other various screws, nuts, wires, connectors, solder, etc
  
  
  Total Cost: Approx. $1200
  
  
  Additional notes:
  
  
• This was my first time using this brand of carbon fiber filament and I have to say its insanely strong, knocking on the back of the case, which is only 5mm thick, feels like knocking on a brick wall, its nothing like any filament i've ever used before and prints surprisingly well but will destroy brass nozzles (which cost pennies anyways).
  
  
• I've gotten it up to 26mph so far, with plenty of throttle left to go (I'd honestly say I didn't hit over 50% throttle). It's been about 2 years since I've rode my longboard, and I've only tried a friends boosted board once about a year ago, so I still need to build up to going fast. A more experienced rider got it up to 29mph and said he still had throttle to spare. So so far no one has been willing to top it off, I'll report back once I get some numbers. I will say that it accelerates faster than most if not all brand name boards.
  
  
• Yes I am aware that I fucked up my rear motor, I have since fixed the issue... Whoops.

Oh gosh. I built this several months ago so this list is mostly from memory, but I’ll do my best. Also bear in mind that my experience with DIYeBoard has been a good one. I haven't had any issues with my ESC or battery. Zero issues with voltage sag or the controller cutting out. I have seen a few reports that these are common issues, but I haven't experienced them. I'm also listing the prices I paid for these items. I don't know if these prices have changed recently so take that into consideration.

Deck – Rimmable 42in top mount complete board (for replacement wheels and bearings) - $35

Battery and ESC – 10s5p kit from DIYeBoard - $220

Motors – 170kv N5055’s from DIYeBoard – 2x $40

Gearing – Gears and Pulley kit from DIYeBoard - $25

Trucks – Caliber 2 (black) - $30 free ship

Wheels – Cal 7 97mm 78A (flywheel hub) - $26 free ship (yes this pricing is correct and yes these wheels are amazing)

Mounts – Boardnamics – approx. $50 shipping included

Grip –Camo Black Diamond griptape – $9.95

​

Speed – 32mph on flat ground with 210lb rider. Could go faster but I wasn't willing to push it without a helmet or other protection.

Range – Unknown I normally get tired before it dies. My estimate is around 15-20miles on speed mode 2 full throttle

Approximate total = $500 USD (NOT including shipping costs for DIYeBoard items all Amazon items were shipped for free)

The Calibers look slightly different than the Randals . Do you think that difference is noticeable when riding?
Huh, the Calibers show up at $53 and The Randals at $48 to me in Muirskate... Anyway, I was looking at the Calibers in Amazon for $40 and the Randals in the Randal page itself for $53. It doesn't matter though, I liked the Randal suggestion because that company seems to have a better reputation than Caliber, and if you also say that the bushings are better and that they will feel better in a drop deck, it's a no brainer!

 

Haha I've never ridden before but I confidence in handling hills falls before even pushing for the first time