Reddit reviews Choseal 3.5mm Audio Cable to 2 RCA Male Aux Cable 6 feet,Gold Plated Speaker Cable Compatible Car MP3 CD Player Mobile Phone PC

The easiest way I can think of is a toslink to RCA converter and the a RCA to 3.5mm cable.

Just in case it doesn't exist, you could hack together an equivalent setup with the following:

Connect the outputs on this switch to your amplifier with one of these cables.

Connect this Bluetooth receiver to one input on the switch with another of these cables.

Finally, connect a cable like this to the other input on the audio switch for the 3.5mm/non-Bluetooth devices. It's not as elegant as what you're looking for, but it should work.

Apologies if you've already thought of something like this and were just trying to avoid it!

Just because something doesn't work with your particular system doesn't mean it's fair to say 'you'd need an adapter to get sound out of it'. I understand you use a Framemeister and it works for you. That's awesome, but it seems that you have a certain bias as a result.

Are you using wireless speakers? If the answer is no, then what kind of inputs does your receiver/speaker(s) have? If they're RCA inputs, then a simple cable is your solution Again, no adapter required.

Have somebody QC this (perhaps from /r/audio):

Amplifier: https://www.amazon.com/gp/product/B007TUSXEY/ref=s9_acsd_top_hd_bw_b2Fmq_c_x_1_w?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=merchandised-search-4&pf_rd_r=RC1EHSN9BNGPF7QBEQWT&pf_rd_t=101&pf_rd_p=e26ee127-5127-5fc0-a063-c5df25bf1331&pf_rd_i=537344

3.5mm to RCA adapter: https://www.amazon.com/Choseal-3-5mm-Audio-Adapter-Cable/dp/B00A7J1ANA/ref=pd_bxgy_107_img_3?_encoding=UTF8&pd_rd_i=B00A7J1ANA&pd_rd_r=XAFTKMHGNWE0HHB4R052&pd_rd_w=BGEgf&pd_rd_wg=5XYHG&psc=1&refRID=XAFTKMHGNWE0HHB4R052

Speaker wire: https://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y/ref=sr_1_3?s=electronics&ie=UTF8&qid=1519759916&sr=1-3&keywords=speaker+wire

Controller HDMI+VGA+DVI+Audio Input LCD... https://www.amazon.com/dp/B06X9NJ2NR?ref=ppx_pop_mob_ap_share

CanaKit Raspberry Pi 3 B+ (B... https://www.amazon.com/dp/B07BC7BMHY?ref=ppx_pop_mob_ap_share

Kinter MA170 12V 2 Channel Mini... https://www.amazon.com/dp/B007TUSXEY?ref=ppx_pop_mob_ap_share

Samsung 128GB 100MB/s (U3)... https://www.amazon.com/dp/B06XWZWYVP?ref=ppx_pop_mob_ap_share

EG STARTS 2x Arcade DIY Kit Parts... https://www.amazon.com/dp/B01M7R7YW3?ref=ppx_pop_mob_ap_share

Easyget 4 Pcs/Lot 5V LED... https://www.amazon.com/dp/B01N5Y8E2Z?ref=ppx_pop_mob_ap_share

TecUnite LED Maple Garland LED... https://www.amazon.com/dp/B00A7J1ANA?ref=ppx_pop_mob_ap_share

Pyle Marine Speakers - 4 Inch 2... https://www.amazon.com/dp/B078JF26LF?ref=ppx_pop_mob_ap_share

Car Interior Lights, CJRSLRB APP... https://www.amazon.com/dp/B073DZQRZC?ref=ppx_pop_mob_ap_share

LDKCOK USB 3.0 Mount Cable –USB... https://www.amazon.com/dp/B076DPQFZB?ref=ppx_pop_mob_ap_share

I'll explain what I have today, but i'm hoping to swap it out for a full sonos connect:amp setup. Also i'm not sure how much detail you want, so i'll describe all of it.
 
I have in ceiling speakers in every room except:

1. the bathroom where I have a Sonos Play1.
   
2. the living room where I have a Marantz SR5008.
    
   The in-ceilings are hooked into a NuVo Concerto 8 zone audio amp. That provides both power and signal distribution.
    
   I have a different version of these baluns which allows for 2 different audio signals over a single cat5. I have one in the living room, the other in the central wiring closet (where the NuVo is).
   On the Living Room side, one red&white L/R pair is plugged into a Marantz source, the other red&white L/R pair is connected to a 3.5mm->analog adapter cable like this: https://www.amazon.com/Choseal-3-5mm-Audio-Adapter-Cable/dp/B00A7J1ANA/ref=sr_1_6?ie=UTF8&qid=1473619743&sr=8-6&keywords=3.5mm+to+rca .
    
   On the NuVo side, I have a Sonos Connect as one source, and the second pair from above (3.5mm cable) as a second source. The first pair is connected to an unpowered zone output.
    
   This allows me to plug a phone/laptop into the living room 3.5mm, send the signal back to the NuVo, and play wherever I want. If I want to also play in the living room (which i almost always do), I turn on the NuVo unpowered zone, turn on the Marantz, set to the "NuVo source" setting on the Marantz. The signal travels from the laptop to the NuVo then back to the Marantz. Yes thats taking the long way, but that way I can play the same song in every room of the house synchronized.
    
   re:Do these work over a switch: These particular ones do NOT, they require an end-to-end connection. If wiring is an issue, you could get a bluetooth receiver/transmitter. I've also got that but for a totally different purpose & location. I got a cheap one and regret it, as it often loses connection with the central wiring closet so I need to repair it.
    
   Hopefully that wasn't way more detail than you wanted.

u/Arve and I were just talking about this:


https://www.jdslabs.com/mobile/products/177/ol-switcher/ (to control both sub and speaker volume)

And these:

https://www.amazon.com/gp/aw/d/B00A7J1ANA/ (phone to volume control)

https://www.amazon.com/gp/aw/d/B0141KPCDY/ (split output of volume control)


https://www.amazon.com/gp/aw/d/B001W0WI02/ (cable to sub from splitter)

https://www.amazon.com/gp/aw/d/B000068O17/ (cable to speaker from splitter)

If you would like to really cheap out:

You can do this:

https://www.amazon.com/gp/aw/d/B00A7J1ANA/ (phone to splitterl)

https://www.amazon.com/gp/aw/d/B0141KPHR0/ (splitter from phone cord)
https://www.amazon.com/gp/aw/d/B001W0WI02/ (cable to sub from splitter)

https://www.amazon.com/gp/aw/d/B000068O17/ (cable to speaker from splitter)


Use phone or compiter as volume control in this setup.

Yeah best bet and still pretty cheap is to go to good will and get a stereo deck cassette deck, they usually are only 5 to 10 and get a cheap wire on Amazon thats a headphone jack to AV. Here's one for 6 bucks. https://www.amazon.com/gp/aw/d/B00A7J1ANA/ref=mp_s_a_1_4?ie=UTF8&qid=1519364428&sr=8-4&pi=AC_SX236_SY340_FMwebp_QL65&keywords=3.5+to+av&dpPl=1&dpID=51hPVy4zynL&ref=plSrch

Plug the 3.5 in your phone the other end in the cassete deck and it'll Probably sound perfect

Another option even is getting two connectors like this and a regular rca to 3.5mm cable and you should end up with the same thing functionally, I'd personally go with this option.

Oh btw Monoprice.com is great for getting stuff like this, cheap and good quality.

You need an adapter to 3.5mm jack (also known as minijack).

I'm not sure if the AT-LP60 has a cable attached permanently or not, if so you can use this cable: https://www.amazon.com/3-5mm-Right-Audio-Female-Adapter/dp/B003LVDWOQ/ref=sr_1_7?ie=UTF8&qid=1497122433&sr=8-7&keywords=rca+to+3.5mm otherwise you can use any regular 3.5mm to rca cable like this https://www.amazon.com/Choseal-3-5mm-Audio-Adapter-Cable/dp/B00A7J1ANA/ref=sr_1_5?ie=UTF8&qid=1497122433&sr=8-5&keywords=rca+to+3.5mm

If the speakers have a permanently attached 3.5mm jack cable, then if the AT-LP60 cable is detachable you need this cable: https://www.amazon.com/eBoot-3-5mm-Female-Stereo-Adapter/dp/B01KC6BEZQ/ref=sr_1_24?ie=UTF8&qid=1497122433&sr=8-24&keywords=rca+to+3.5mm or if it isn't, this one https://www.amazon.com/Manhattan-inches-Stereo-Splitter-3-5mm-Adapter/dp/B0009JFF7A/ref=sr_1_1?ie=UTF8&qid=1497122582&sr=8-1&keywords=female+rca+to+female+3.5mm.

One of these will do the job https://www.amazon.com/Behringer-U-Control-Ultra-Low-Interface-Software/dp/B0023BYDHK/ and a cable like this https://www.amazon.com/Choseal-3-5mm-Audio-Adapter-Cable/dp/B00A7J1ANA/

http://www.amazon.com/Choseal-3-5mm-Audio-Adapter-Cable/dp/B00A7J1ANA/ref=sr_1_12?s=electronics&ie=UTF8&qid=1414873611&sr=1-12

You would need a cable like this between the computer and amp. Not sure about those speakers though. You'll probably have to do some cutting and splicing.

https://www.amazon.com/Choseal-3-5mm-Audio-Adapter-Cable/dp/B00A7J1ANA/ref=pd_sbs_200_3?_encoding=UTF8&pd_rd_i=B00A7J1ANA&pd_rd_r=WHQ3NBYMR83PW6SXJF2G&pd_rd_w=4au9K&pd_rd_wg=Ovnm1&psc=1&refRID=WHQ3NBYMR83PW6SXJF2G thats what I'm using and plugging it into the audio in.

I think I've found a solution. I can use this: https://www.amazon.com/Portta-4PETHHA-Extractor-Converter-Digital/dp/B00LPHJEAE/ref=sr_1_4?ie=UTF8&qid=1483711838&sr=8-4&keywords=hdmi+audio+extractor+3.5mm
To extract the audio and then use this: https://www.amazon.com/Choseal-3-5mm-Audio-Adapter-Cable/dp/B00A7J1ANA/ref=sr_1_7?ie=UTF8&qid=1483711884&sr=8-7&keywords=3.5mm+male+to+rca+male
To send that audio to the speakers.

Sorry for the delay.. I forgot to reply.

I'm sure you already got the adapter and cable. The adapter is perfect and the cable might be OK. I would look for one that is only for audio (red and white connectors only, not the yellow video cable.) This one would be good - https://www.amazon.com/Choseal-3-5mm-Audio-Adapter-Cable/dp/B00A7J1ANA/ref=sr_1_4?ie=UTF8&qid=1483627337&sr=8-4&keywords=rca+audio+to+3.5mm

With your budget in mind I highly recommend the $180 U-Turn Orbit Basic turntable. I have one that I got with an upgraded cartridge (Grado Black) and it is a superb table. https://uturnaudio.com/collections/all

Speakers... hmmm... That's tougher. Used ones on Craiglist can be great. Just be sure that the foam surrounds are in good shape (this is the foam ring around each driver) and check some online reviews. For new speakers, I think these look like a great option for the price - https://www.amazon.com/Klipsch-R-14M-Reference-Bookshelf-Speakers/dp/B00MGQAH2M/ref=sr_1_1?s=aht&ie=UTF8&qid=1483627753&sr=1-1&keywords=bookshelf+speakers&refinements=p_89%3AKlipsch