Reddit reviews CLONE KING 25 or 36 Site Replacement Spray Manifold

I would just build your own dude. All those aero cloner things are is a manifold with (x) amount of holes drilled in and (x) amount of mister heads, a decent submersible pump, a container with a lid (or manufacture a lid to fit out of Styrofoam or something similar! Bonus here is you also get inserts to stick the clones in safely) Create a manifold to fit your container. Make it a capital H shape sort of like this.In the middle of the 'H' use a Tee so you can make the connection to the pump. Tap the holes, for this application you could just find some screws with similar threading and drill/remove the manifold to tap for the misters. Connect the manifold to the pump and stick it to the bottom of the container, then fill with water (can use light nutrient solution) right up UNDER the manifold, not over it. While your pump soaks for a second, cut holes in your lid. (or cut lid to fit if using foam) Remember to make a little slot for the pump cord! Give the pump a test run AWAY FROM STUFF YOU WANNA KEEP DRY! Make sure all the misters are spraying good and not leaking (at least not too bad, no need to be mega perfect here) Then just get your clones ready! I know lots of guys that just use the insulation squares(rock wool) and just make the lid holes to fit them. I personally like the foam approach as is just feels better for me and i feel like it will give less problems with mold and other yuckies. I like to top it off with a light cabinet handle right in the middle so you can easily lift the lid (I just basically stole the handle from countless other aero cloners please dont sue me clone king lol) With this method you can make many smaller cloners or some bigger ones just dial up on the pump GPH! Just my opinion, many smaller ones might be easier to work with as youd have all the separation you need for organizing! Happy cloning bud!

Very cool! I tried doing an aeroponic thing with a PVC manifold and a bunch of micro sprinklers but they clogged up all the time making it annoying. Something home made like this: https://www.amazon.com/CLONE-KING-Replacement-Spray-Manifold/dp/B01EE4OEX6/

I have my seedlings in a shared DWC until i get a chance to build them one each individually. http://imgur.com/8JQzAyW

I am glad you used the Flora series! It is what I am using too. Checking my Gro Logs, I used the following in a 5 gallon bucket: 50 Micro, 50 Flora, and 20 Bloom. I also added 20 hydroguard. That put my PPM at 1050 which would be quite a bit higher than yours. Maybe I should drop it a tad. I have pH at 6.2.

Edit: What size reservoir do you use for this setup? Do the foggers ever clog?