Reddit reviews Critter Spray Products 22032 118SG Siphon Gun
We found 6 Reddit comments about Critter Spray Products 22032 118SG Siphon Gun. Here are the top ones, ranked by their Reddit score.
Compressor-mounted spray gun kit; requires 3 cfm at 90 psiAttaches to Mason jars filled with paints, stains, lacquers, and moreComes with glass Mason jar and metal spray gunIncludes siphon gun, tube, 16-ounce Mason jar, jar gasket, and instructions; compressor not included (3/4-horsepower minimum)Fits standard 16-ounce Mason jar--easily adaptable to fit other jarsRequires minimum 3/4 hp compressor.
One day I'll bite the bullet and upgrade! Right now I'm using this little guy: https://www.amazon.com/Critter-Spray-Products-22032-Siphon/dp/B00006FRPJ
Which works decent enough but adjusting the pressure takes some patience.
We've done a bunch of furniture with latex paint with this guy. I think I also add some Floetrol the paint to help it go on smoothly. And you need an air compressor.
https://smile.amazon.com/Critter-Spray-Products-22032-Siphon/dp/B00006FRPJ/ref=smi_www_rco2_go_smi_g2609328962?_encoding=UTF8&%2AVersion%2A=1&%2Aentries%2A=0&ie=UTF8
https://www.walmart.com/ip/Flood-Floetrol-Latex-Paint-Conditioner/21987608?wmlspartner=wlpa&selectedSellerId=1194&adid=22222222227016818525&wl0=&wl1=g&wl2=c&wl3=51806713511&wl4=pla-83209389911&wl5=9003439&wl6=&wl7=&wl8=&wl9=pla&wl10=112550058&wl11=online&wl12=21987608&wl13=&veh=sem
Lots of good reviews on the Ryobi brad nailer, and cordless/(no air hose) is certainly very appealing.
Pneumatic nailers are still a little smaller than the cordless ones, so a little better for getting into tight corners when doing baseboard (inside corners under cabinet toe kicks, etc).
The pneumatic tools are also just so inexpensive once you have the compressor. I thought I mainly needed a brad nailer, but the 1/4" stapler has been very handy as well. Just replaced the carpeting on the cat tree, and the stapler made it a breeze. The Harbor Freight 2-in-1 nailer/stapler has poor reviews so I'd avoid it, but the separate tools have been great. I had a bad experience with the HF staples, but Dewalt staples in the HF stapler have worked well.
18ga brad nails are fine for most trim, but I feel like they are just barely enough for baseboards. I just got a 16ga nailer and I like them much better for baseboard. I feel like 18ga is perfect for light trim up to 1/4" or 3/8" thick, and 16ga is better for 1/2" or thicker, especially if it is dense like MDF.
I really like Flexzilla air hose; very soft and flexible with no kinking. Also put a swivel connector on the guns.
Pancake compressor will definitely not be enough for an HVLP sprayer. Would work for an airbrush, or possibly a small sprayer like the Critter spray gun.
Compressor can be pretty noisy and annoying indoors. Either look at the quiet ones like California Air Tools or HF's new quiet ones, or just buy 100ft of hose so you can leave the compressor outside while you work inside.
I've used Critter sprayers for over a decade. Hard to beat those things for reliability and ease of use.
Why not get something like this and then use mason jars?
Everything is stored in glass and seals, plus you can use it to spray.