Reddit Reddit reviews CURT 31006 24-Inch High Trailer Hitch Spare Tire Mount for 2-inch Receiver

We found 5 Reddit comments about CURT 31006 24-Inch High Trailer Hitch Spare Tire Mount for 2-inch Receiver. Here are the top ones, ranked by their Reddit score.

Automotive
Spare Tire Carriers
Automotive Exterior Accessories
CURT 31006 24-Inch High Trailer Hitch Spare Tire Mount for 2-inch Receiver
VERSATILE. This spare tire mount has slotted holes and a 24-inch height to fit a wide range of tire and wheel sizes (tire mounting hardware not included)STANDARD FIT. This trailer hitch spare tire mount is equipped with a standard 2-inch shank to fit any industry-standard 2-inch x 2-inch trailer hitch receiver (hitch pin sold separately)FRONT OR REAR. This trailer hitch accessory can be mounted on the front or rear of the vehicle, wherever a standard 2-inch receiver is properly installedSOLID STRENGTH. This receiver hitch spare tire mounting bracket is constructed from steel to provide dependable strength for miles to comeCORROSION-RESISTANT. For long-lasting protection against the elements, this trailer hitch wheel mount is shielded in a durable black powder coat finish
Check price on Amazon

5 Reddit comments about CURT 31006 24-Inch High Trailer Hitch Spare Tire Mount for 2-inch Receiver:

u/dont_dox_me_again · 5 pointsr/Subaru_Outback

Mine is in my hitch. I fabricated my own because I didn't like how bulky the other ones were.

I bought this fold-down adapter for my hitch and this Curt tire mount. Cut off the receiving end of the tire mount and then weld it into the adapter. It's pretty heavy but it's much more compact. You can’t mount the tire directly to that Curt mount so I used a couple of 2” wheel spacers and old lug nuts as my mounting hardware. My stock suspension started to sag immediately after putting it on so I have to add these Rallitek 1.4" lift overload rear springs to compensate for the extra weight. Once fully loaded, it handles better than it did with the stock suspension. I also need to figure out what to do about my license plate. Right now the spare blocks the original plate mount so I’ve got it zip-tied to the spare until I can figure out a better solution.

u/iamprobablynotjohn · 3 pointsr/battlewagon

So the hitch that I found sits comfortably behind the number and actually affects the exit angle very little if at all. I'll also be getting a 1 1/4 to 2 inch adapter that is technically only meant for class II hitches, but for only holding a spare tire, it will be fine. It's also fine for holding a bike rack or something. I'll edit this comment when I'm at my computer and show you what I'm getting

EDIT:

  1. This is the hitch that I will be using. If you look at the pictures, it seems very discrete without much taken away from exit angle.

  2. This is the best one that I can find for your car. There aren't any pictures form reviews, but it sounds like in the comments that it is also discrete, although there's no guarantee. If that one doesn't work, something custom is probably your only option.

  3. This is the adapter that you can use. Just remember that as a general rule of thumb, your towing capacity is cut in half if you use one of these, just as a safety precaution. Towing with an adapter also depends on how strong the pin is that you're using to hold it into the base hitch.

  4. This is the tire holder that I am probably going to get. It seems a little short, but I measured on my car and it should be alright. If it is way too short, you can get a hitch riser like this

  5. THIS is the tire carrier that I want, because it is very very strong and the cheaper one folds to the side, which is really nice. I don't know if I'll be able to afford it, though, so I'll see
    If all this metal that's bolted to your car is rattling around way too much because of the couple millimeters of play in the hitches, pick yourself up a couple of these and it's problem solved.

    Hope this helps! If you want to know anything else, let me know


    Edit 2: formatting
u/vertigo1083 · 2 pointsr/CherokeeXJ

Have you looked into something like this? Or possibly something like This? These guys made the ideal carrier for cheap and fairly simple, but if you want to just outright buy one, there are ones like these:

http://www.cbioffroadfab.com/products/trail-accessories/fold-down-tire-carrier-premium-model/ (A lil pricey)

https://www.amazon.com/CURT-31006-Spare-Tire-Mount/dp/B0009YIE1O

All of them except the last one fold down so you can open your tailgate, which is nice. It doesn't look bad, keeps the roof free, the cargo open, and easy to move/access.

u/Donkeymint · 1 pointr/4x4

It’s difficult to find anything <$200. There’s the cheap Curt hitch on Amazon. Floats around $85 give or take.

I think it might look kind of derpy on a full size SUV but it would do the job.

Honestly, your best bet is probably to find a local machine shop and see if they would weld something up for you. I bet for $150 you could pay somebody with some time and talent to make something a bit nicer than the Curt hitch. Maybe it could at least swing downward for tailgate clearance.

Also, depending on where you are, keep an eye in FB marketplace and Craigslist. I see tire mounts pop up every once in a while.

Nice tire mounts are expensive for a reason. It takes a lot to keep a heavy, oversized tire from rattling around and making vibrations with thousands of miles of off road use and debris.

u/mattt710 · 1 pointr/Offroad

Got you

$86

Curt Manufacturing 31006 Hitch-Mounted Spare Tire Mount Black https://www.amazon.com/dp/B0009YIE1O/ref=cm_sw_r_cp_api_i_VV4DCbXB29TTD