Reddit reviews Damaged Screw Extractor Kit and Stripped Screw Extractor Set. Its A HassleFree Broken Bolt Extractor and Screw Remover Set Made From H.S.S 4341 With Hardness 63-65hrc.
We found 10 Reddit comments about Damaged Screw Extractor Kit and Stripped Screw Extractor Set. Its A HassleFree Broken Bolt Extractor and Screw Remover Set Made From H.S.S 4341 With Hardness 63-65hrc.. Here are the top ones, ranked by their Reddit score.
APPLY TO ALL DRILLS : 4 pieces screw extractors work with any drill and all the screw size or bolt (3-12mm), These extractor tools are used to reverse the damaged screw counterclockwise until it is releasedPOWERFUL : Striped screw extractor removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and boltsEASY TO USE : Just two simple steps will get the job done - Use a suitable size screw remover to drill a hole with cutting size and it’s easy to extract the screw or bolt using extractor toolHARDNESS 63-65HRC : Higher hardness material and is more durable than most screw extractors in market, the hardness and the durability are better than others, Buy with confidence and complete peace of mindWARRANTY :Essential Tools stripped screw extractor is backed by our 3 Tier 100% Money Back Guarantee, If you are not satisfied with the product, you can return the product for a full refund without any hassle
You need a damaged screw extractor, something like this.
Use something like this, and stop using ignorant language.
Heres what I could think of:
Amazon - screw extractor
Home Depot, Harbor Freight and most any hardware store sells these. www.amazon.com/dp/B07GZ17QD9/ref=cm_sw_r_cptai.S6JDb77DEQ6G
A set of these is a must, so you may nut strip another screw in the future. www.amazon.com/dp/B00A7WAHTU/ref=cm_sw_r_em_api_i_c_kBB7AbGCN238A
If the axle you have doesn't have a hex slot on one end, the frame on that side should have a hole in the frame that locks that end from turning (when aligned properly) if you push that end of the axle flush against the chassis, it will allow you to unscrew the axle like normal.
If that doesn't work or the chassis hole is broken/doesn't exist, I'd treat the side without the hex hole as a stripped screw and get a screw extractor set (requires a power drill to make your life easier), and get a new axle as the result. https://www.amazon.com/Extractor-Stripped-HassleFree-Hardness-63-65hrc/dp/B07GZ17QD9
You can try using some pliers to grab the end of the part that’s sticking out and try to unscrew it out. I’d spray some Kroil, PB blaster or WD-40 on it before to help it come out easier. If you can’t grab it with pliers a screw extractor will work. here is a set off amazon I’m pretty sure you can find these at almost any hardware store. They come in handy when stuff like this happens.
I carry this tool with me all the time.
It’s one of the only as seen on tv things that is actually genius.
Cheap and easy I promise it will work.
https://www.amazon.com/Extractor-Stripped-HassleFree-Hardness-63-65hrc/dp/B07GZ17QD9/ref=mp_s_a_1_5?keywords=grab+it+drill&qid=1570637412&sr=8-5
https://www.amazon.com/Extractor-Stripped-HassleFree-Hardness-63-65hrc/dp/B07GZ17QD9
I have taken out a few striped ones on my krytac with a specialized drill bit extractor for stripped screws...with a decent drill/electric screwdriver and patience it works.
https://www.amazon.com/Extractor-Stripped-HassleFree-Hardness-63-65hrc/dp/B07GZ17QD9/ref=sr_1_1_sspa?crid=1PIAZR47QYGDB&keywords=stripped+screw+extractor&qid=1557866336&s=gateway&sprefix=stripped%2Caps%2C198&sr=8-1-spons&psc=1
​
Now updated all screws to stainless steel...
Contrary to what other posters have said, this is not a security screw. It's a one-way screw and there isn't a tool specifically designed to remove it. You'll need to either cut it out, drill it and remove it with a screw removal tool like this or if you're lucky you could try hitting them with some PB Blast and using a flathead and a lot of elbow grease.
Also, if you have a small Vice Grip you can try locking down on the head and using that to loosten it up to the point where you can remove it by hand.