Reddit reviews DEWALT Right Angle Attachment (DWARA100),Yellow/Silver Right Angle Attachment
We found 16 Reddit comments about DEWALT Right Angle Attachment (DWARA100),Yellow/Silver Right Angle Attachment. Here are the top ones, ranked by their Reddit score.
Right-angle Attachment For Impact Driver, 5X longer life on average vs. Milwaukee 48-32-2100 in Milescraft 1302Sure-set System Floating Magnet Secures Fasteners, True 90 degree head allows tight access when using 1" bit tipBetter Accessibility For Tight Spaces, Impact Ready Performance - Designed for Use in Impact DriversBetter accessibility to drive screws and drill holes in tight spaces, Fasteners supported by ring magnetErgonomic ABS handle does not get hot while in use, Allows for tighter access with your current impact driver, with increased gear strengthImpact-rated gears allow for more than 2,000 life-cyclesRing Magnet secures fastener, and helps to reduce slipping & wobbleBetter accessibility to drive screws and drill holes in tight spacesFasteners supported by ring magnetErgonomic ABS handle does not get hot while in useAllows for tighter access with your current impact driver, with increased gear strengthImpact-rated gears allow for more than 2,000 life-cycles
DeWalt power drill with bit set and angle adaptor. Perfect set for someone newly living on their own or for someone who just doesn't have their own power drill. The angle adaptor is particularly handy.
I got this one a couple years ago for a specific job and have since found myself using it quite often. I actually just used it today! It works great. The day it breaks, I'll be buying another one immediately.
Right angle attachment. I have the dewalt one. They sell it at home depot. They work great. I recommend getting one if you don't have one.
DEWALT DWARA100 Right Angle Attachment https://www.amazon.com/dp/B00C0VSNKQ/ref=cm_sw_r_cp_apa_euWnyb1Q21X15
I've used 3 different right angle drill attachments in the last few years. The first was a Milwaukee 110º one and it was alright, price was 15 dollars, I've killed that one. Then I bought this one for 20 at the time and it has been great, way nicer than my first adapter. I am still using it today.
http://www.amazon.com/DEWALT-DWARA100-Right-Angle-Attachment/dp/B00C0VSNKQ/
My friend has this 50 dollar Milwaukee one and its amazing. Way nicer than my dewalt and it can take a lot of torque. I've never got one since its a little bit thicker than the dewalt and most of the time space is an issue for me.
http://www.amazon.com/Milwaukee-49-22-8510-Right-Angle-Attachment/dp/B000BYEJ02/
For next time :)
https://www.amazon.com/Makita-763198-1-Keyless-Chuck/dp/B000O3I5GY
https://www.amazon.com/DEWALT-DWARA100-Right-Angle-Attachment/dp/B00C0VSNKQ
https://www.amazon.com/Makita-B-34833-8-Inch-Adapter-9-Piece/dp/B00DR4G7BM
All of these things were worth at least 5 times what I paid as far as I’m concerned.
At my house we have a horizontal 2x4 as well and the way we got around it is to make a small hole right above or below the horizontal beam then use a 90 degree drill bit tool thingy and drill a small hole through the beam. Then when you drop the cable from the attic down, one person can look through the dry wall hole and navigate the cable through the hole in the beam.
Edit: this:
https://www.amazon.com/DEWALT-DWARAFS-Right-Angle-Shaft/dp/B013UBXU3E/
Or this:
https://www.amazon.com/DEWALT-DWARA100-Right-Angle-Attachment/dp/B00C0VSNKQ
I have this https://www.amazon.com/dp/B00C0VSNKQ/ref=cm_sw_r_cp_awdb_t1_pDOpDbJ4JM57C but it's bulkier than what you show in the picture. Not sure of a slimmer option, but the DeWalt is a lifesaver and of good quality.
I would think if you have a drill bit that doesn't have a smooth shank, it could work for drilling. The piece I linked accepts standard hex shank bits, so a drill bit without a smooth shank could work
A drill plus a right angle adapter
You can also use a much smaller drill, or even better a compact impact driver which is a lot smaller than even the smallest drills
I use a Ridgid impact driver with self-feeding Speedbor Max bits. They require nearly no effort at all. As long as you can pull the trigger, you can drill. They also work with right angle adapters and extensions.
I charge my batteries at night if I remember. I'm curious what impact uses both batteries to drill through 6 2x4s.
Right-angle impact adapter
https://www.amazon.ca/DEWALT-DWARA100-Right-Adapter-Attachment/dp/B00C0VSNKQ
Dewalt makes two attachments you could look at.
This is their impact driver rated right angle attachment. I use mine fairly often on the job, and it's held up to hard use, including running 1" spade bits with my impact driver. It's not something I use often but it can really get you out of a jamb.
They also make this flex shaft one, but I don't own one so can't personally comment on its toughness. It looks lighter duty but it would fit into even tighter or awkward spots.
Can you get a right angle drill adapter to drill down from the attic?
Something like this: https://smile.amazon.com/DEWALT-DWARA100-Right-Angle-Attachment/dp/B00C0VSNKQ/
cut another hole above the stud, and use the following, and a 3/4 inch spade bit to cut a hole in the stud.
https://www.amazon.com/DEWALT-DWARA100-Right-Angle-Attachment/dp/B00C0VSNKQ/ref=sr_1_4?ie=UTF8&qid=1469205685&sr=8-4&keywords=angle+drill
https://www.amazon.com/DEWALT-DWARA100-Right-Angle-Attachment/dp/B00C0VSNKQ/
I'm not sure why people downvoted you for pointing to the 100 series, which is impact ready.
Edit: dwara50 for drill, versus dwara100, for impact, on dewalt website. Seriously people, why downvote people trying to bring info to the table?
Edit2: maybe the impact rated dwara100 has more durable gears? According to the more informative amazon. So the dwara50 may be fine for impact uses but won't last as long. Anyhow, I'm not asserting who's right or wrong, only wanting to point out, the difference in 2 models.