Reddit Reddit reviews DEWALT Router Fixed/Plunge Base Kit, Variable Speed, 1.25-HP Max Torque (DWP611PK)

We found 13 Reddit comments about DEWALT Router Fixed/Plunge Base Kit, Variable Speed, 1.25-HP Max Torque (DWP611PK). Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Power Tools
Routers
Power & Hand Tools
DEWALT Router Fixed/Plunge Base Kit, Variable Speed, 1.25-HP Max Torque (DWP611PK)
Durable 1.25 horsepower motor delivers the power to meet the toughest applicationsVariable speed control feature enables bit speed to be optimized for changing applications. No Load Speed range 16,000-27,000rpmSoft-starting motor features full-time electronic feedback that maintains motor speed through the cutDual LED's and clear sub-base ensure maximum visibility in operationAdjustment ring enables controlled bit depth changes to within 1/64-inch (fixed base only)Allows up to 1.5" of depth travel with standard base & 2" with plunge base.Adjustment ring enables controlled bit depth changes to within 1/64" (fixed base only)
Check price on Amazon

13 Reddit comments about DEWALT Router Fixed/Plunge Base Kit, Variable Speed, 1.25-HP Max Torque (DWP611PK):

u/granworks · 5 pointsr/woodworking

Honestly, this question can be asked about any tool. Should a hobbyist buy cheap tools just to get started or spend more on quality tools, but buy fewer of them at first?

For the most part, I'm in the "buy quality tools" camp. I started out on the cheap tools (Skil, Ryobi, etc) and they made a lot of tasks harder than they needed to be. That is, a skilled craftsman could have gotten quality results from those tools but I certainly couldn't. I found that the quality of my work jumped dramatically when I switched to precision tools.

Now... in your case, none of three routers that you're referencing would be in the cheap crap territory, as far as I'm concerned. You'll do fine with any of them.

Some thoughts, though:

The Bosch 1617EVSPK is often considered the gold standard for mid sized routers. Many many woodworkers have that one and love it. You will absolutely not regret getting it.

The DeWalt DW618PK is a direct competitor to the Bosch and holds its own very well. Lots of very satisfied users of that model, too. Another that you'll definitely love.

The Hitachi models... are almost surely worth getting as well. I'll be honest, though -- they aren't talked about as much as either the Bosch or DeWalt.

One final thought: Depending on how you'll use a router, you might consider a "trim" router like the DeWalt DWP611PK. I've found that one to be notably easier to handle than my mid sized and it has handled everything I've thrown at it with aplomb. Really, the only downside is that it can only accept 1/4" shanks and most of my bits are 1/2". If I had more 1/4" bits then I'll likely use the DWP611PK almost exclusively when not on the router table.

u/Figdudeton · 3 pointsr/gunpolitics

Basic freedom kit:

https://www.80percentarms.com/80-ar-15-easy-jig-gen-1/

https://www.80percentarms.com/gen-1-easy-jig-tool-kit/

https://www.amazon.com/DEWALT-DWP611PK-Torque-Variable-Compact/dp/B0049ZFUK2/ref=pd_lpo_sbs_469_t_0?_encoding=UTF8&psc=1&refRID=TJ0F7J784GV5Y2QAE3PW

https://www.harborfreight.com/power-tools/drills-drivers/drill-presses/8-in-5-speed-bench-drill-press-60238.html

https://www.righttobear.com/cerro-forge-raw-80-percent-lower-receiver-p/80raw-1.htm

You don't actually need a drill press, but I like to have one (for P80s as well). There are higher end jigs, routers, and drill presses (Easy Jig gen 2, 5d Tactical) but these are good enough to get you going. They are what I use (minus that drill press, I have a brand name one) and they work well repeatedly.

u/macs3n · 2 pointsr/woodworking

if you're willing to buy new, i suggest going smaller for your first router: https://www.amazon.com/DEWALT-DWP611PK-Torque-Variable-Compact/dp/B0049ZFUK2

I have a full size Bosch router that has a lot more power but I like my little router much more. It's great for doing freehand stuff (routing out butterflies, small mortises, etc) and should be able to handle any edge routing you want to do.

u/ListenHereYouLittleS · 2 pointsr/woodworking

I use my smallest router on a plunge base 100% of the time. It is very useful on many scenarios. Unlike what the other guy said about dewalt being construction tools, I disagree completely. Dewalt tools have served my needs more than adequately. With one exception: the 618 router simply should not be mounted on a router table or that thing's variable speed mechanism will get destroyed by the sawdust. I think makita makes excellent tools as well.

In your case, please do yourself a favor and get the 611 with plunge base. I suspect the makita version is perfectly capable as well.

u/IcanCwhatUsay · 2 pointsr/hobbycnc

I believe it is this one

DEWALT DWP611PK 1.25 HP Max Torque Variable Speed Compact Router Combo Kit with LED's https://www.amazon.com/dp/B0049ZFUK2/ref=cm_sw_r_cp_apa_P3SDzb09F30DW

I think open builds part store also sells it but my phone is being a pain and won't load.

u/diito · 1 pointr/woodworking

Ultimately if you get serious into woodworking you are going to end up with several routers, a 3+ HP router table, at ~3 HP handheld, a 1.25 HP handheld, and a trim router. It all comes down to what you are doing with them. The router table is your work horse that you use for 90% of tasks, except for the few operations you can't do. The big routers are unwieldy to handle so you really have to make sure they are well supported and stable or then can get away from you. For larger bits you need the 1/2" shank and the extra power they provide but for smaller work you give up control and it's a nuance to use them. For those sorts of projects a smaller 1.25 HP compact router is the better option. You can't use the larger bits up much easier/safer the handle and more control. They use a 1/4" shank. For really fine work that you want to do free hand, say routing out waste for inlay, the trim router is what you want.

You want definitely want a plunge router. That allows you to start/stop in the middle of a piece by plunging down into it. I don't know that I've ever bothered to switch a router to fixed base. Variable speed control is also a must, you will get a much better cut if you have the correct speed for the bit/material you are working with. As far as as shank size you generally want 1/2" as it's safer, so if there is an option between 1/4" and 1/2" for that bit you'd usually go for the the 1/2". A lot of the smaller bits are 1/4" only, larger 1/2". You can use a 1/4" shank bit in a 1/2" router but not the other way around. So keep what bits you need in mind when you pick a router. Another important aspect is the router bits you use. Cheap bits are not worth it. A lot of people will say buy a cheap set then upgrade the ones you use regularly. I did that, not a great idea. The quality of the cut is poor and they don't feel safe. Do you want a cheap made in China bit spinning at a high RPM in a tool you are holding? No thanks! I get 1000% better results from good bits, smooth cuts and no issues.

For the sound of what you want to do I'd suggest a smaller compact router to start (then a router table /w dedicated 3+hp router motor). I like this one:

http://www.amazon.com/dp/B0049ZFUK2/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=3MF02H72ZOHDJ&coliid=I2UIP99Y0DK7X9

As far a bits go my top choice is Whiteside. The Freud quadra cuts (larger 4 winged bits) are super nice as well. There are several other good brands out there too though. I'd buy bits on an as needed basis as they are expensive for good ones.

u/lasttraveler · 1 pointr/woodworking

https://www.amazon.com/DEWALT-DWP611PK-Torque-Variable-Compact/dp/B0049ZFUK2/ref=sr_1_1?s=power-hand-tools&ie=UTF8&qid=1480055730&sr=1-1&keywords=dewalt+router

This is the one I bought. Super happy with it. I mounted it upside down on a table and turned it into a table router. works great.

u/bigjgibs · 1 pointr/woodworking

So I don’t really know much about this router BUT if this is your first router and you want a good one to use for small to large projects I HIGHLY recommend this one. This was my first and I use it for EVERYTHING and for the price it’s the best router on the market IMO.

DEWALT DWP611PK 1.25 HP Max Torque Variable Speed Compact Router Combo Kit with LED's https://www.amazon.com/dp/B0049ZFUK2/ref=cm_sw_r_cp_api_i_3jyACbQW32Y0R

u/t2231 · 1 pointr/woodworking

You could stick with the DeWalt line and pick up a trim router: https://smile.amazon.com/DEWALT-DWP611PK-Torque-Variable-Compact/dp/B0049ZFUK2/

This is a great kit that includes the plunge base.

u/hoyfkd · 1 pointr/woodworking

If it is his first router, I would recommend getting the DeWalt 611PK kit. It is a compact router, but it is pretty powerful for its size. I bought the Bosch recommended in another comment as my first router, and looking back, I wish I had purchased the DeWalt first. I find myself using the smaller router far more than the bigger one. Plus, the entire kit is around $160, so you have plenty of money to get a MCLS bit set and still be way under budget.

Just my 2 cents.

u/az_liberal_geek · 1 pointr/woodworking

Yes. DeWalt makes very nice routers and this is a very reasonable mid-size model. I'm going to give two other recommendations, though.

For mid-sized routers, you can't go wrong with the Bosh 1617EVSPK. It is a solid workhorse and wins more than a few comparison tests: http://www.amazon.com/Bosch-1617EVSPK-4-Horsepower-Variable-Collets/dp/B00005RHPD/

Honestly, though, I'd skip a mid-size router if I was getting my first router. The new compacts are extremely versatile and I find myself reaching for mine most of the time. It's gotten to the point that I use my router table for router table type stuff and my compact for everything else. My mid-size just sits there, except for rare occasions.

The best compact router I've found is the DeWalt DWP611PK. I've had it for about a year and it's been my go-to router ever since: http://www.amazon.com/gp/product/B0049ZFUK2/

u/molonlabe88 · 1 pointr/woodworking
u/NoctuaD15 · 0 pointsr/woodworking

I wanted to buy a hand tool, but I couldn't see the logic in doing so when I could get a powered router for the same price.

https://www.amazon.com/gp/product/B0049ZFUK2/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1

I was debating on this one and the makita that i saw was recommended. But this one ended up being cheaper on prime day.

Edit: I have never used one of these things. What kind of bits are ideal for woodworking?