Reddit reviews DotStone HDMI Switch Bi-Direction 4K HDMI Splitter 2 x 1/1 x 2 No External Power Required 2 Ports HDMI Switcher Supports Ultra HD 4K 3D 1080P for PS4 Xbox Fire Stick Roku

Not OP but I have a bunch of these hooked up and I’ve never had any issues with them. You don’t have to pay much :/.

I have some hooked up to an hdmi audio extractor with an RCA -> AUX cable into my PC’s Microphone port, which I have set to ‘Listen To’ in Windows 10, so any audio coming from the HDMI source gets routed through my PC. $35 vs ~$150 for OPs capture card method :P. Though, if your motherboard or sound card support SPDIF input, you should use that instead (this extractor does both).

DotStone HDMI Switch Bi-direction 4K HDMI Splitter 2 x 1/1 x 2 No External Power Required 2 Ports HDMI Switcher Supports Ultra HD 4K 3D 1080P for PS4 Xbox Fire Stick Roku https://www.amazon.com/dp/B01L8LLP2G/

I have the single running to one of my monitors, the duals run to my PS4 and PC. Then my second monitor runs straight to my PC.

$10 on Amazon and it doesn't need power. Can be used as a 2-1 or a 1-2 switch. It's small, made of metal, and the light is not super bright. Works with 4K signals. I use it to connect my Nintendo Switch and GPDXD+ to the X1S.


https://www.amazon.com/dp/B01L8LLP2G/ref=cm_sw_r_tw_dp_U_x_1LB6AbYDGG4D3

Yes, i use my phone as a hotspot.

I hardwired one of these:

https://www.amazon.com/ONLINE-LED-STORE-Automotive-Extension/dp/B00PXAN1DU/ref=sr_1_2?ie=UTF8&qid=1527657371&sr=8-2&keywords=hardwire+cigarette+lighter

Then i put in a 5-volt usb charger with two ports. One for the raspberry pi and the other for the firestick. Then i bought this splitter:

https://www.amazon.com/Switcher-Bi-direction-Hub-HDCP-Passthrough-Supports-DotStone/dp/B01L8LLP2G/ref=sr_1_7?s=electronics&ie=UTF8&qid=1527657426&sr=1-7&keywords=hdmi+splitter

All cables are hidden so it looks very clean.

For everyone who is worried about their hardware...

1. Get some cable ties and take the load off the hdmi port if the cable gets yanked.
   
   
2. HDMI is not the best port if you are plugging and unplugging daily. Leave the Rift plugged in or get an HDMI Switch so you aren't putting a bunch of undue stress of your GPU.

HDMI Switcher 2 Ports Bi-direction Manual Switch 2 x 1 / 1 x 2 HDMI Hub-HDCP Passthrough-Supports Ultra HD 4K 3D 1080P By DotStone https://www.amazon.com/dp/B01L8LLP2G/ref=cm_sw_r_cp_api_y1c1AbH36NQMP

This will allow you to switch from tv to monitor without switching HDMI cables. I use it myself.

Not possible? Maybe I’m not understanding what he is asking but it sounds like he wants this.

DotStone HDMI Switch Bi-direction 4K HDMI Splitter 2 x 1/1 x 2 No External Power Required 2 Ports HDMI Switcher Supports Ultra HD 4K 3D 1080P for PS4 Xbox Fire Stick Roku https://www.amazon.com/dp/B01L8LLP2G/ref=cm_sw_r_cp_api_NBtNBbAWBFXCM


All you do is press the button when you want to play the other console and it will switch back and forth. No power source etc and relatively low price.

So the reason this is needed is SteamVR gets confused when two headsets are plugged in at the same time...

These are the exact two bits I ordered:

https://www.amazon.com/Bi-direction-Manual-Switch-Passthrough-Supports-DotStone/dp/B01L8LLP2G/ref=sr_1_3?s=electronics&ie=UTF8&qid=1510945708&sr=1-3&keywords=hdmi+switcher&dpID=51NuwF1AMCL&preST=_SY300_QL70_&dpSrc=srch

https://www.amazon.com/Sabrent-Individual-Switches-included-HB-UMP3/dp/B00TPMEOYM/ref=sr_1_5?s=electronics&ie=UTF8&qid=1510945749&sr=1-5&keywords=powered+3.0+hub

But any bi-directional HDMI switch, and any powered USB 3.0 hub that lets you turn on and off connections should work.

I tried plugging my two Rift cameras into the hub but Oculus software was spitting out "Poor Communication" issues, so those have dedicated ports into the mobo (and it's OK to leave them connected while using the Vive)

This will make QA across platforms a lot easier :D

It is this one https://www.amazon.com/gp/aw/d/B01L8LLP2G/ref=ya_aw_od_pi?ie=UTF8&psc=1

https://www.amazon.com/Switcher-Bi-direction-Hub-HDCP-Passthrough-Supports-DotStone/dp/B01L8LLP2G/ref=sr_1_4?s=electronics&ie=UTF8&qid=1526243885&sr=1-4&keywords=hdmi+switcher

Make sure the game supports vga of course. I use the following:


HDMI Switcher 2 Ports... https://www.amazon.com/dp/B01L8LLP2G?ref=ppx_pop_mob_ap_share


Tensun 3RCA AV CVBS Composite &... https://www.amazon.com/dp/B019T0WFA4?ref=ppx_pop_mob_ap_share


OREI XD-600 VGA PC/Laptop to HDMI Video Converter -Upscaler Up to 720P/1080P Converter with Audio Jack https://www.amazon.com/dp/B00IUJJHAW/ref=cm_sw_r_cp_api_i_TgsPDbNJCDAPV

Then finally I use the 8bit retro VGA box.

This is not the most efficient setup or the cheapest but it lets me switch easily from vga to s-video for the titles that prefer it and ensures the audio works. I recently purchased a DCHDMI but haven’t had it installed.

/u/Gogo229 - For live events, I'd recommend a real camcorder like the [$1799 JVC HM200] (https://www.amazon.com/JVC-GY-HM200U-Professional-Camcorder-Handle/dp/B00V7LZTYI//ref=as_li_ss_tl?ie=UTF8&linkCode=ll1&tag=battleforthew-20).

This camera will cost you several hundred dollars less than a GH5 and give you built-in SDI out, which you can plug straight into the SDI input of a [$551 Blackmagic Web Presenter] (https://www.amazon.com/Blackmagic-Design-Presenter-Teranex-Pearstone/dp/B06X3W3HQS//ref=as_li_ss_tl?ie=UTF8&linkCode=ll1&tag=battleforthew-20) without an adapter.

With an [inexpensive 2 input switch] (https://www.amazon.com/Bi-direction-Manual-Switch-Passthrough-Supports-DotStone/dp/B01L8LLP2G//ref=as_li_ss_tl?ie=UTF8&linkCode=ll1&tag=battleforthew-20) for the Web Presenter's HDMI input, you'll have a slick 3 camera setup you can send straight to your laptop without spending $1000 for the Roland.

[Here] (https://youtu.be/LgLz5ba1aTE) is a nice summary of what the Web Presenter can do.

And here are a few examples of the image quality the HM200 (and its lower-end twin, the HM170) can produce:

Outdoors

• [A Fishing Story with Ronnie Green and Jen 4k by sam root] (https://vimeo.com/178128763) (2 camera show with a couple of color grading examples) (4k)
  
  
• [JVC GY-HM170 (4K) by Ferenc Kereszturi] (https://youtu.be/dgKV1rwyoc4) (2160p)
  
  Indoors (Non-studio)
  
  
• [JVC GY-HM170/JVC GY-HM200 - 2016 World of Wheels - Chicago by illdaddyrod] (https://youtu.be/fvm9UYQg8Bo) (1080p)
  
  
• [4K basketball by JVC GY-HM170/GY-HM200 test video in typical dark gym - Pinewood Girls Basketball 2016, by Rich Altmaier] (https://youtu.be/IDmpxSKo_Pw) (shot in a dimly lit basketball gym at -21dB - 2160p)
  
  Slow Motion
  
  
• [Paintball: 2016 January 31st practice @ Blitz Paintball Colorado Mile High Island] (https://youtu.be/BP95O4bn8os) (shot with JVC HM170 and DJI Osmo at 1080/120p)
  
  
• [Ian Howes - Broome Tioga MX (KTM 250 XC) | JVC HM170 Test Footage by Adamgmx24] (https://youtu.be/Zb3gPnjLjbM)
  
  
• [GY-HM200/HM170 1920x1080 120p footage by JVCProfessional] (https://youtu.be/5GxHLvXSFS0)
  
  For shooting live events, a real video camera will make your life a lot easier than shooting with a still/video compromise camera. If you want the large sensor, shallow depth of field "look" for some shots, you can shoot them with your G7.
  
  And if you ever want to do a single camera livestream, you can leave the Web Presenter at home and stream straight to the web from the HM200, which has a built-in IP encoder for live streaming from anywhere there's a hotspot with a [$7.99 wi-fi dongle] (https://www.amazon.com/gp/product/B003MTTJOY//ref=as_li_ss_tl?ie=UTF8&linkCode=ll1&tag=battleforthew-20).
  
  [Here] (https://youtu.be/lzF0XRSM4_w) is how streaming works with the [$2295 sports version] (http://adorama.evyy.net/c/60286/51926/1036?u=https%3A%2F%2Fwww.adorama.com%2Fjvgyhm200sp.html) of this camcorder (yours would be exactly the same, but without the scoreboard graphic overlays).
  
  [Here] (https://youtu.be/Y3oYNy47yYo) is the JVC promo video on this feature, using USTREAM as the example streaming platform.
  
  Hope this is helpful and good luck with finding the right camera for your needs!
  
  
  
  

I have a 40" 4K on one wall and Next to it a desk with monitor.

Use this for easy switching

DotStone HDMI Switch Bi-Direction 4K HDMI Splitter 2 x 1/1 x 2 No External Power Required 2 Ports HDMI Switcher Supports Ultra HD 4K 3D 1080P for PS4 Xbox Fire Stick Roku https://www.amazon.com/dp/B01L8LLP2G/ref=cm_sw_r_cp_apa_i_uDc5CbQNH8XDN

You mean a bidirectional hdmi switch?

https://www.amazon.com/Bi-direction-Manual-Switch-Passthrough-Supports-DotStone/dp/B01L8LLP2G

• Will it work? Yes
  
• Have it used one? No
  
• How do I know it will work? I read the product description and plan to use the same switch to hook us a NES and SNES to one monitor
  
• What if it doesnt work? Return it
  
• But...I spent $X.xx what if it does not work? Again, return it and stop asking the same questions. Laziness isn't an excuse and judging by your experience with analog signals I'll wager your old enough to help yourself. Time and effort spent finding a solution is part of the experience! Yes someone else may have done this already, or you could be the first! Take a possible solution and come back to this community with the answer.
  
  Edit: Given you have the disposable income to purchase a snes classic and free time to play said games.... You have enough money for a hdmi splitter and enough time (if you get a factory defect/ D.O.A product) to return it for a functioning one. Cheers
  

For those that work from home with their work laptop: an HDMI switcher.

Use it to switch your monitors source from your desktop or your docking station!

https://www.amazon.com/dp/B01L8LLP2G/_encoding=UTF8?coliid=I2LBLDC00EGRRD&colid=DBA5F9ZE9GQU&psc=0

Here you go!

https://smile.amazon.com/gp/aw/d/B01L8LLP2G/ref=mp_s_a_1_1?ie=UTF8&qid=1505820254&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=HDMI+Switcher+2+Ports+Bi-direction+Manual+Switch+2+x+1+%2F+1+x+2+HDMI+Hub-HDCP+Passthrough-Supports+Ultra+HD+4K+3D+1080P+By+DotStone&dpPl=1&dpID=51zcAC0JEoL&ref=plSrch

A splitter will work. I have this one coming from my receiver to my KS8000 on one side and a monitor on the other. Both look great.

https://www.amazon.com/gp/product/B01L8LLP2G/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1#customerReviews

I use this one and it works great. I havent tried HDR, but according to the reviews HDR seems to work fine

This one is pretty cheap

https://www.amazon.co.uk/gp/product/B01L8LLP2G/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

You want an HDMI switch. Something like this. You'd also want an HDMI to DP adapter, or cable.

That way, PC to Yiynova via VGA, and PC to Dell and Switch to Dell via HDMI is possible.

I think what you actually need is an HDMI switch

Something like this https://www.amazon.com/dp/B01L8LLP2G/ref=cm_sw_r_cp_apa_i_ZDHXCbQ9EA82H

HDMI Switcher 2 Ports Bi-direction Manual Switch 2 x 1 / 1 x 2 HDMI Hub-HDCP Passthrough-Supports Ultra HD 4K 3D 1080P By DotStone https://www.amazon.com/dp/B01L8LLP2G/ref=cm_sw_r_cp_apap_j56VM8gFbzbdx

Works like a charm, i have my one s and ps4 pro hooked up to this thing.

I have this one, works fine for my Switch.

HDMI Switcher 2 Ports Bi-direction Manual Switch 2 x 1 / 1 x 2 HDMI Hub-HDCP Passthrough-Supports Ultra HD 4K 3D 1080P By DotStone https://www.amazon.com/dp/B01L8LLP2G?ref=yo_pop_ma_swf

EDIT:
You might also consider an HDMI switch. which will allow you to just click a button and switch between PC input and PS3 input. Most of these (Unless expensive) don't include any alternative audio option, just HDMI <-> HDMI

.....

EDIT 2:
If you JUST want to record the video on your PC, and don't want to display it live, any capture card will do, whether internal or external, and is just about the only way to go - very, very few video cards have bidirectional HDMI ports, so you likely only have output on your PC

.....

The linked item (The Easycap) is along the right lines, but not quite there. The PS3 will not allow dual video output in this manner. it only supports one output, and you can only switch between the two, not have both.

The better way is to stick with HDMI, but install a video capture card with HDMI passthrough in your computer. Plug PS3 HDMI into the capture card, and plug the cards output to your monitor. I know they can be expensive, but it's the proper way in this case. The one I linked is relatively nice, there are probably cheaper options with passthrough capability - I just don't feel like searching through results for the best bang/buck ratio.

This should also allow you to use the capture card's audio output (3.5mm on this card) to connect to your speakers for sound that's pulled from the HDMI - meaning you can forgo the component cable entirely.

Without passthrough it'd still be possible, but you'd basically have to stream the video to yourself- meaning there's likely to be some video lag compared to passthrough or direct connection. The one you linked would require this kind of setup, which is not ideal.

It looks like what you have there will do what you intend without switching. Simply turn the device on that you want to use, or have both.

If you wanted to toggle, this looks like it will do what you want. It can combine or split depending on how you connect to it - two monitors on the dual end and one pc on the single end makes it a splitter.

I bought a simple low-profile HDMI switch from amazon and have it mounted on the side (hidden). Very small and needs no external power (link below). I'm using an amazon with Alexa fire stick for the streaming input, which is what I would recommend.

https://www.amazon.com/gp/product/B01L8LLP2G

Yes pretty much. If you want a monitor to share the PC and Xbox output, the you need a HDMI switch that supports 2 or more input and outputs to 1.

Just found this on amazon, this might do the job for you

HDMI Switcher 2 Ports Bi-direction Manual Switch 2 x 1/1 x 2 HDMI Hub-HDCP Passthrough-Supports Ultra HD 4K 3D 1080P By DotStone

It has good reviews too

Is this ok? About half the cost. https://www.amazon.com/gp/aw/d/B01L8LLP2G/ref=mp_s_a_1_4?ie=UTF8&qid=1506801889&sr=8-4&pi=AC_SX236_SY340_QL65&keywords=hdmi+y+cable&dpPl=1&dpID=51zcAC0JEoL&ref=plSrch

This is the one i got I have one going to my 1080 P TV and one going to my 4k PC monitor. The source is a Ps4 Pro. Works great. the only thing you need to check is your cables. make sure they support 4k properly. I have longer HDMIs that say they support 4k but they didnt.

How exactly are you able to connect everything via hdmi? I have a triple monitor set up and that takes up all of my ports. I bought this the other day and just hooked it up. It will not work with the headset but works fine when switching to the monitor.

Also, im quite envious of the large table that accompanies such a massive set-up.

https://www.amazon.com/gp/product/B01L8LLP2G/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

I bought one of these and it works perfectly. No power supply needed, but you do have to push a button to switch :\

I had the same issue. Ended up buying this and it works perfectly. Doesn't mess with my TVs 4k resolution either.

Amazon UK
Amazon US

https://www.amazon.com/Bi-direction-Manual-Switch-Passthrough-Supports-DotStone/dp/B01L8LLP2G/ref=sr_1_2?s=electronics&ie=UTF8&qid=1505795712&sr=1-2&keywords=hdmi+switch

The one's I had you could tell if the one in your room was set to listen to you because there was a button like "passive listening" or something. It would stay depressed while active, but pushing it again would pop it back out.

Damn I miss good physical buttons. I currently have an hdmi switcher that has an awesome super clicky button that has 2 physical states.

It is the best button I have used since 80s video players. Just fucking click it in and it feels so damn good. And then clicking another button and having the other one pop out. So satisfying. The absolute best though, was probably pressing down the tape on those top loading video players.

I would

https://www.amazon.com/Switcher-Bi-direction-Hub-HDCP-Passthrough-Supports-DotStone/dp/B01L8LLP2G/ref=sr_1_4?s=electronics&ie=UTF8&qid=1521397665&sr=1-4&keywords=HDMI+switch&dpID=51NuwF1AMCL&preST=_SY300_QL70_&dpSrc=srch

Looks like you don't have to plug it in with just two. HDCP is an encryption method. I have a switch that passes HDCP but only when external power is applied. Its was like 10 bucks extra for the plug. But the one I listed above claims to do HDCP pass through without the need of external power so It looks like your in luck on that end.

Someone can probably chime in with a better answer, but I'm in the same situation (2 computers, one main monitor). As far as hardware, pick up a simple switch from Amazon/ebay for about 10 bucks. The link is for one on Amazon for HDMI. If they are both DVI or VGA, you could probably find one on ebay for 3-5 bucks. They're called 'KVM switches', I believe.

Otherwise, what I am doing now is, I have my main PC attached to my monitor. On both computers I have TeamViewer installed (but you could use any 'remote desktop" software). Then you login using a generated ID and the monitorless-computer screen is sent to and mirrored/displayed on your main computer monitor.

Keep in mind, using a software solution instead of a hardware solution will cost memory resources.

EDIT: Now that I think about it, "Plex/Sonarr/Radarr/torrent downloader" probably all have a web interface. For example on any computer on your network go to

• http://[IP of media server]:32400 for plex
  
• http://[IP of media server]:8989 for sonarr
  
• http://[IP of media server]:7878 for radarr
  
• http://[IP of media server]:8181 for plexPy
  
• http://[IP of media server]:8112 for deluge
  
  Then you might very rarely have to actually use a monitor with the server. You might want to login to your router and give your server a static local IP. Otherwise to find it on the server, open terminal and type: 'ifconfig -a' or if that doesn't work, try 'ip addr'. show
  

What kind if switch are you looking at? Buy something like this https://www.amazon.com/Bi-direction-Manual-Switch-Passthrough-Supports-DotStone/dp/B01L8LLP2G/ref=sr_1_3?s=electronics&ie=UTF8&qid=1499090621&sr=1-3&keywords=hdmi+switch

A KVM is possible, but the big advantage of a KVM is that it not only allows you to share a screen across two sources, but also an attached keyboard and mouse. Unless you intend to use a keyboard and a mouse with your Switch, I'd go for a far less expensive, 2-port HDMI switch. That's all you need if you're only concerned about video. Plus, I'd argue it has more future utility. It'll be smaller, because it has less ports and the ports it has are smaller. You could bring it with you when you travel and hook multiple things up to HDTV's at hotels or friends' places. Plus, most newer displays have HDMI ports. Buying a DVI KVM (or even a DVI-only video switcher) is going to be more expensive and clunkier.

Here's an example of stuff that would work. I am not endorsing these products at all, I'm just picking the first well-reviewed looking hit from my search results (on Amazon):

search terms: "2-port HDMI switch"

looks good: DotStone HDMI Switch Bi-Direction only $8.. You won't get anywhere near that with a KVM.

and then, with search terms "HDMI to dvi", you could probably use 1 or 2 of either these:

HDMI to DVI (cable)

or these HDMI to DVI (adapter)

If you have a ton of extra hdmi and/or dvi cables, you might prefer the adapter, otherwise you could use it on its own in cable-form. Keep in mind that in a typical setup, the Switch's audio is going through the HDMI cable as well, and whether you used a HDMI switch or a DVI KVM/switch, the connection to your monitor is going to have to terminate in DVI, and that DVI won't carry the audio. Does your monitor even have speakers? Even if it did, you most likely won't get any audio over DVI. I haven't tested this myself, but I just did a little research and found you can use the headphone jack on the Switch, while docked, to get it's audio, so depending on what's going to be playing your sound, you might need one or more things from this list:

stereo miniplug cable (male to male) - for going from Switch to portable speakers or anything with a line-in

miniplug couplers - handy if you need to plug the above into another male cable

miniplug to RCA adapter cable - for going from the Switch to a stereo system or similar

​

​

You're much better off going with a switch. I've personally bought several of these and they work great. I use one to swkfch between an Xbox and a ps4, and another to switch between an Xbox and a PC. They're cheap and they work great.

Yeah you would need an HDMI switch with a button to change between the two inputs. Maybe something like this

This HDMI Bi-directiona switch will do what I need????

Accidentally left a referral link so automoderator deleted my comment, here's a fixed variant:

You can get any old 27" 1080p and then hook up an HDMI switch. Something like this.

Edit: Removed Google's auto-appended referral link

I'm looking to purchase the Vizio M50 for Black Friday, and it only has 1 HDR capable HDMI port (I have a Pro, PSVR, and XB1S), so I've had the same exact question as you.

This switch seems to be a good option. It almost has a 5 star rating based on over 800 reviews which is crazy. Downside is that it's not remote operated and you physically have to press a button on the unit to switch between inputs. Upside is it's only $12. The first review by Larry seems to indicate that it'll work with 4k/HDR.

This is my current one https://www.amazon.com/Bi-direction-Manual-Switch-Passthrough-Supports-DotStone/dp/B01L8LLP2G/ref=redir_mobile_desktop?_encoding=UTF8&psc=1&ref_=yo_ii_img

(Using my cell phone so I don't know how to hyperlink it)

I don't have the link to the last one. It was a Rocketfish from Best Buy. Thanks for the recommendation!

Cheers, thanks for all the infos! So it's very unlikely that the cheap HDMI switch killed everything? Something cheap like this: https://www.amazon.com/Bi-direction-Manual-Switch-Passthrough-Supports-DotStone/dp/B01L8LLP2G

I think most people probably just directly connect their TV into their ps4 when they want HDR. Otherwise you can try something like this [HDMI Selector Switch] (Https://www.amazon.com/dp/B01L8LLP2G/ref=cm_sw_r_cp_api_u1UfAb83WDN3N). Although you'd still need to walk to the ps4 to hit the button.

Make sure to buy one that supports HDR pass through.

(Since you'd need to keep this next to your ps4 I don't really see the added benefit compared to swapping your HDMI cable each time but maybe it'll work for you!)

https://www.amazon.com/Switcher-Bi-direction-Hub-HDCP-Passthrough-Supports-DotStone/dp/B01L8LLP2G/ref=sr_1_4?ie=UTF8&qid=1524259786&sr=8-4&keywords=monitor+switcher

Or you could get an HDMI switch.

I mean, you could also just buy one of these...