Reddit Reddit reviews Ecolink Z-Wave PIR Motion Detector Pet Immune, White - PIRZWAVE2.5-ECO

We found 18 Reddit comments about Ecolink Z-Wave PIR Motion Detector Pet Immune, White - PIRZWAVE2.5-ECO. Here are the top ones, ranked by their Reddit score.

Electronics
Security & Surveillance Equipment
Ecolink Z-Wave PIR Motion Detector Pet Immune, White - PIRZWAVE2.5-ECO
Premium components provides accurate and instant motion detection in both Automation mode and security modeOvercomes potential interference of pets as large as 55 lbs, saving nuisance false alarms.Easy installs with included flush mount and corner mount wall brackets and begins to learn as Soon as batteries power it up.Five Year battery Life and discrete design keep it out of sight and out of mind when not on alert.Natively compatible with SmartThings, it works with most brands of Z-wave home security hubs like Vera Plus, Vera Edge, Vera Lite, HomeSeer, D-link staples connect and Piper NV. If your brand is not listed, (e.g. Wink or Alarm.com based security panels) compatibility cannot be guaranteed.
Check price on Amazon

18 Reddit comments about Ecolink Z-Wave PIR Motion Detector Pet Immune, White - PIRZWAVE2.5-ECO:

u/whookid_east · 7 pointsr/homeautomation

best Zwave motion sensor. Hands down! Has pet immunity for 25lbs and up dogs or the option to change it to 55lb and up. Very accurate and range is the best from all zwave motion sensors

u/mastakebob · 3 pointsr/homeautomation

I have a few of these Z-wave Plus Motion Detector, Easy to install with PET Immunity, White (PIRZWAVE2.5-ECO) https://www.amazon.com/dp/B01MQXXG0I/ref=cm_sw_r_cp_apa_i_KGQ0DbYVGQB2J around and they work pretty well. Snappy triggering.

However, like others have said, you might as well spend another 6-8 bucks and get the aeotec trisensor which is just as responsive, more configurable, smaller, and with 2 additional sensors to use.

u/PlayedIn · 3 pointsr/homeautomation

I would go zwave. I have two of these Ecolink motion detectors that I use with an Aeotec Zwave stick. Their range back to the hub is very good and are great on battery. I moved the jumper on these so that they reset after motion in seconds instead of minutes.

https://www.amazon.com/Ecolink-Z-Wave-Motion-Detector-PIRZWAVE2-ECO/dp/B01MQXXG0I?th=1

u/rabidfurball · 2 pointsr/SmartThings

There are pet-ignoring motion sensors if you did want motion detection. I have a bunch of Ecolink PIRZWAVE2.5-ECO sensors that have a sensitivity toggle. On lowest sensitivity mode it does not see my 60 lb husky, but still does see people reliably. On medium sensitivity it does see the husky, but not my 35lb dalmatian, and on max sensitivity mode it sees anything that moves.

u/Sometimes-Scott · 2 pointsr/homeassistant
u/Smaskifa · 1 pointr/BlueIris

I had the same issue. The image based motion detection just is not ideal for this use outdoors. It works well indoors where you don't have wind or car headlights usually. I ended up setting up PIR motion detectors outdoors in conjunction with a Raspberry Pi running Domoticz. Configuration was not at all easy, but I'm much happier with the alerts I'm getting now. Just getting Domoticz setup as well as adding the motion detectors to it was a chore. Then there was the added hassle of handling the motion events in Domoticz to trigger an HTTP request to a node server I setup, which then made a call to Blue Iris itself.

I used these motion detectors and this z-wave adapter in the setup.

u/shortRound1911 · 1 pointr/homeassistant

My fav Z-Wave motion sensor is the ecolink (https://www.amazon.com/gp/product/B01MQXXG0I/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1). Out of all my zwave motion sensors these are by far the best motion sensor I have. Only 'down side' is the detection range is sort of large for my rooms so motion is triggered from hallway when walking by.

Pros:
- Fast triggering

- Very long battery life (running same batteries over a yr now)

- Has never needed tinkering with after setup, very stable and reliable

​

Other Z-Wave motion sensors i have, ordered by best to worst imo:

- Aeotec multisensor 6 (3x) best multi sensor option imo but burns battery fast (~1-2months) (https://www.amazon.com/gp/product/B0151Z8ZQY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)

- Fibaro Motion Sensor (1x) works great most of the time, but every few months it freaks out and constantly triggers motion and needs to be removed and re-added to network. prob bad unit (https://www.amazon.com/gp/product/B01KOGDETI/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)

- Mono Price multi sensor (2x) very slow motion sensor detection, scan freq is low and afaik unconfigurable. bottom barrel option imo, do not recommend as motion sensors but do ok w/ temp / humidity / light but lite measurement is in a weird scale vs other lux sensors i have (https://www.amazon.com/gp/product/B01MRYFE90/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)

u/hashtaglegalizeit · 1 pointr/homeautomation

I used the below sensors to block off areas of the home. They don't totally overlap areas, but I find the trick is a little bit of overkill for each room. I actually have the slightly older version of this sensor and it works great. The real trick is setting a virtual timer that resets if any of that room's sensors are activated

https://www.amazon.com/gp/aw/d/B01MQXXG0I/ref=dp_ob_neva_mobile

u/sfn_alpha · 1 pointr/homedefense

How about a home automation hub with outdoor motion sensors/door sensors? You could probably set something up for about $100-150 depending on how many sensors you wanted, and would have lots of future expansion capability for having it turn on lights with motion detected and such. The Samsung hub is Z-wave and ZigBee compatible, which means there are literally hundreds of sensor options.

Samsung Smartthings Hub: https://www.amazon.com/dp/B07FJGGWJL/ref=cm_sw_r_em_apa_i_arlPDb3JDT1QG

Z-Wave Plus Motion Sensor: https://www.amazon.com/dp/B01MQXXG0I/ref=cm_sw_r_em_apa_i_6slPDbE5CV2CQ

Honeywell Outdoor Door Sensor: https://www.amazon.com/dp/B00683AMTW/ref=cm_sw_r_em_apa_i_6vlPDb2CGEXHF

u/shebazz42 · 1 pointr/homeautomation

Totally agree - and frankly VLANs are too much of a pain to deal with anyway.

To answer your original question, I use this: https://www.amazon.com/dp/B01MQXXG0I

I removed the jumper (making the pet immunity thing moot) and am very happy about coverage and response time. Batteries should last a couple years.

u/kojaengi · 1 pointr/homeassistant

I have a couple of these - https://www.amazon.com/Z-wave-Detector-install-Immunity-PIRZWAVE2-5-ECO/dp/B01MQXXG0I/ref=sr_1_fkmr0_1 which use a somewhat uncommon CR123 battery. I was worried about having to replace them regularly but it actually ended up being OK - they've been running for a year and a half, with regular daily activation and they're still reporting strong battery life. I don't know how that's possible, but I won't complain!

u/deathtech · 1 pointr/homeautomation

Z-wave Plus Motion Detector, Easy... https://www.amazon.com/dp/B01MQXXG0I?ref=yo_pop_ma_swf

u/HtownTexans · 1 pointr/homeassistant

I have an array of motion sensors and can tell you even the same brand has different reporting times. My GE motion sensor in my closet turns the light on the minute i hit the door but the one I put in the upstairs bathroom doesnt detect my motion till im fully in the room. A lot of the delay can also be from the server side too. If you are running a pi it may take longer than on a NUC. I've noticed with my door sensors since I went to a stronger PC to run my HASS that some of my sensor that would occasionally miss a door open or close don't anymore.

for my actual recommendations:
the best motion sensor I have is the Ecolink 2.5 however it is a big unit. You aren't hiding this bad boy anywhere.

My favorite door sensor are these because I like that they are no show. However these are my ones that would occasionally miss an open or close until i upgraded my system.

u/_sadboyloko · 1 pointr/homeautomation

Same here.

EDIT: FWIW I was thinking of this Link

It recently dropped $1.09 in price since yesterday.

u/joelhawkins · 1 pointr/SmartThings

agreed in some part. my concern would be our dog and at night when in a "home mode". i did see the likes of the below to [maybe] solve the pet matter, but that functionality seems sort of questionable to me that it could actually work:

https://www.amazon.com/Z-wave-Install-Immunity-Detector-PIRZWAVE2-5-ECO/dp/B01MQXXG0I/ref=pd_lpo_vtph_421_bs_t_2?_encoding=UTF8&refRID=V83F6AYJJZCR68XN8QD4&th=1

i didn't consider mono-price. i do want to find that sweet spot between highly affordable and highly effective/functional. :)

u/qwerty_dh · 1 pointr/SmartThings

This one Z-wave Plus Motion Detector, Easy to install with PET Immunity, White (PIRZWAVE2.5-ECO) https://www.amazon.com/dp/B01MQXXG0I/ref=cm_sw_r_cp_api_7.t0AbWGYDA8B

u/FlamingoFlamboyance · 1 pointr/homeautomation

Items like this are what I am looking at.... other suggestions would be very appreciated.