Reddit Reddit reviews Extech 480172 AC Line Splitter

We found 12 Reddit comments about Extech 480172 AC Line Splitter. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Electrical Equipment
Electrical Testers
Multi Testers
Extech 480172 AC Line Splitter
Allows clamp meter to measure AC current on a 2 wire or 3 wire power cordProvides easy and safe measurements of current without the need to cut off the plug and separate the conductorsPlugging the power connector into the line splitter separates the hot/live conductor from the neutral (and ground)Also features voltage check function
Check price on Amazon

12 Reddit comments about Extech 480172 AC Line Splitter:

u/electriker · 18 pointsr/electricians

https://www.amazon.com/Extech-480172-AC-Line-Splitter/dp/B0000YHN9W

Otherwise, you need to separate the hot and neutral as in a panel or receptacle. The magnetic fields of the two conductors cancel each other out.

u/MrDoomBringer · 4 pointsr/electricians

$16 at Amazon. I'm sure the Harbor Freight one is cheaper and will fall apart in 3 years.

u/garugaga · 2 pointsr/electricians
u/Watase · 2 pointsr/vandwellers

Ammeters like that typically require the neutral/positive wires to be separated. You can't just clamp over the whole power cable to get a proper amp reading. It makes it more difficult as you need to either cut up an extension cord, or get something like this.

u/Pinewold · 2 pointsr/electricvehicles

I would not run a car charger through any direct contact meter. If the meter dies you may looses your ride to work. Consider something like https://sense.com meter that clamps around the wires. It may be overkill but would probably work well. Sense can measure the whole house and identify each appliance.

A lower price option (still 3X your device) clamp meter + wire splitter in also bought section

Wire splitter

You need to get the wire splitter to get just the live wire.

u/proxpi · 1 pointr/livesound

I have been through the exact same thought process... and you probably don't want to get a clamp meter.

Turns out, you can't just pop it around a power cable and find out how much power it's drawing. You need to be able to clamp it around ONE of the conductors inside the cable. If it's clamped around both conductors, the reading will be canceled out. http://total-automation.in/wp-content/uploads/2015/02/Fluke_Clamp_meter_319_correct_usage.png

You would need to insert something like this http://amzn.com/B0000YHN9W into the circuit, which you obviously can't do live. This means you totally negate the advantage of a clamp meter over something like a Kill-a-watt.

u/Anatolios · 1 pointr/mildlyinteresting

You can always use something like this.

u/Seanybonbon · 1 pointr/engineering

What are you calling a line splitter? Google is showing me these, but that doesn't make sense to me with your plug/cord/cable on each end not being CE comment. These don't have cords or cables.

u/Some1-Somewhere · 1 pointr/u_VanillaSnake21

If you open up the appliance, you can probably find individual wires. Or in the box behind your socket, or in the switchboard, or use a line splitter.

You could also get a kill-a-watt or something.

u/WyTheGuy · 1 pointr/electricians

I mean you can get a line splitter and a clamp on ammeter to get an idea of what theyre drawing but it wouldnt give you actual power logging. I dont know how much servers fluctuate in power consumption though, or much about servers at all, so take that advice with a grain of salt. This would just be a cheap way to get an idea.

u/MrRollboto · 1 pointr/pics

I wonder if you could attach a clamp meter to that thing. You wouldn't need one of these

u/revengeofbigd · 1 pointr/electronics

You could use an AC Line Splitter to separate the conductors of an AC cable:

Extech AC Line Splitter