Reddit reviews Extreme 2 Way HD Digital 1Ghz High Performance Coax Cable Splitter BDS102H
We found 11 Reddit comments about Extreme 2 Way HD Digital 1Ghz High Performance Coax Cable Splitter BDS102H. Here are the top ones, ranked by their Reddit score.
UNIVERSAL MOUNTING - MOUNTING THE DEVICE IN THE BEST CONFIGURATION REGARDLESS OF THE LOCATION. MOUNT VERTICAL OR HORIZONTALLY ELIMINATES THE NEED OF ADDITIONAL SCREWS OR MOUNTING HARDWARE.EXTENDED PRODUCT LIFE - ZINC ALLOW DIE CAST HOUSING AND THE BACK COVERING PLATE ELIMINATES "GALVANIC" CORROSION CAUSED BY DISSIMILAR METALS. THIS COMBINED WITH THE SEALED HOUSING ABILITY TO WITHSTAND 15PSI OF INTERNAL PRESSURE WATERPROOF THE ELECTRONIC COMPONENTS INSIDE THE DEVICE.SEALED F-PORTS - INDOOR, OUTDOOR, WET, DRY OR HUMIDITY,THE PRESSURE TESTED SEALED F-PORTS ELIMINATE THE POSSIBILITY OF MOISTURE INGRESS.CIRCUMFERENCE CENTER CONDUCTOR SEIZING - EVERY F-PORT'S CENTER CODUCTOR SEIZING MECHANISM UTILIZES a 4-SIDED COAXIAL COMPRESSION THE PROVIDES 8 - COAXIAL SURFACE CONTACT AREA CONFORMING PRECISELY TO THE SURFACE OF THE CENTER CONDUCTOR FORMED IN A PROGRESSIVE DIE.SMD PCB COMPONENT INSERTION TECHNOLOGIES - EXTREME BROADBAND'S MANUFACTURING PROCESSES ENHANSES THE ELECTRICAL AND MECHANICAL PERFORMANCE. THIS PROVIDES CONSISTENT DEVICE TO DEVICE OPERATION.
Someone probably ran a cable to extend to another room. One is probably a feed, and one is probably an extension to another box. If this is the case, put a splitter on the feed and attach the extension and your new cable to the splitter.
Splitter
Extreme 2 Way HD Digital 1Ghz High Performance Coax Cable Splitter BDS102H https://www.amazon.com/dp/B007YV0UQW/ref=cm_sw_r_cp_api_GEq4BbNCN09XC
Splitter
Faceplate
Mediabridge Wall Plate with F81 Jack (1-Port) - White https://www.amazon.com/dp/B00HN9KT48/ref=cm_sw_r_cp_api_aFq4BbJ2808N4
Faceplate
I cut the cord and switched to OTA TV a few years ago, YouTube TV an the other online streaming services are a great idea but a bit late to the party for me.
I get around 60 channels with 4 tuners, 4TB of DVR storage, and can playback recorded or live TV to every device in my house. The initial investment was only a few hundred, most of that going to the PC.
Of course YMMV, but here's my setup:
Hardware
Software
TV "Server"
Receivers
I have the Z1 connected to my TV that runs Kodi, and all of the other devices have Kodi installed from Kodi.tv or an app store.
Basic setup
One day old guide screenshots
Channels 2-9: http://i.imgur.com/qBhGVt8.jpg
Channels 15-24: http://i.imgur.com/rywn87O.jpg
Channels 24-29: http://i.imgur.com/wGK6t62.jpg
Channels 29-45: http://i.imgur.com/XCqGXdL.jpg
Channels 45-52: http://i.imgur.com/zInsWoG.jpg
Channels 55-56: http://i.imgur.com/QmYLnQh.jpg
Channels 56-65: http://i.imgur.com/UenOhUl.jpg
Channels 65-68: http://i.imgur.com/RRwLFrF.jpg
I'll be splitting with 1 side dedicated to the internet modem and the other going to the same splitter already there, just taking the place of the DirecTV input. It has 4 outputs. I've decided on this splitter. Splitter
Was planning on just attaching the ground to this. Is that not correct?
I have mediacom internet but no tv service. I put a splitter on the coax cable, sending one to the modem and one to the tv. Most new TVs have a channel scan option, use that and you'll get quite a few channels. Fox, NBC, ABC, CBS, and 3 PBS are in HD. The rest (ESPN, Comedy Central, ect.) are SD.
A Vizio VA220E? Are TVs obsolete after 5 years now?
>you can't have two sources of input on one input spot on the tv.
What about this?
Instead of a simple T connector a 2 way coaxial TV splitter for SAT-TV or CATV will cost you around 3 USD and will provide correct matching and insolation. http://www.amazon.com/EXTREME-DIGITAL-PERFORMANCE-CABLE-SPLITTER/dp/B007YV0UQW
It will fit nicely with RG6 common F connectors and with ebay pigtails (MMCX-F) for TV usb dongles.
Real CH2 and CH6 are down near the FM frequency range, your antenna won't even see those signals. Your signals are strong enough that an FM antenna would probably work and you don't need the amp. I'd get a FM folded dipole antenna (the T-type that you tack to the wall) like THIS and connect it to a Balun like THIS and then use a regular two-way coax splitter like THIS to combine the signals from the FM antenna and the 1ByOne into the TV/Tuner.
If you have an HDMI output you could get one of these or if its a coxial output maybe one of these
Other options I wonder is: What is your Internet provider?
If it is cable and you have other coax outlets in your house you should be able to move the modem with no problem. If you get TV from the same provider you should be able to buy a coax splitter to split the signal so that both your TV and your cable modem can still plug in.
In terms of the beacons I would definitely play with them to see where you get the best speed. You can use the app to determine how good the general signal is to the beacons and see which devices are connected to which eero. This way you can test the speeds at the different placements.
personally, avoid anything "gold" ... the splitters that comcast uses in my town are these: https://www.amazon.com/Extreme-Digital-Performance-Splitter-BDS102H/dp/B007YV0UQW ... but if you go to an xfinity store they'd probably give you one for free.
I understand, I am also digging for information to better understand what is going on myself.
For signal strength, I could increase it a bit using a different splitter to around -3.2 dBmV in the downstream, the upstream would be around 44.7 to 46.7 dBmV. Where I used to live the technician gave me an Extreme BDS102H, and where I am now the technician insisted I use a Commscope SV-3BG. I do not need a 3-way splitter though.