Reddit reviews Fine Clutter Brushed Nickel Pawn Style Fridge Magnets, Office Magnets, Dry Erase Board Magnets, Refrigerator Magnets, Whiteboard, Map, Magnetic Pins (Pack of 30) (Disc, Silver)

Small Magnets on shirt collars keep falling off. Similar to these: Fridge Magnets.

Any way to prevent them from falling off? Or just get bigger magnets?

Egg foam and plastic boxes for the pewter, for the plastic just place them in the bottom of a shoebox and line them up, use egg foam to eat up any empty space if you can't fill a shoebox.

If you want to spend a little extra money, buy a BUNCH of thin neodymium magnets from eBay or similar. Hot glue them to the bases, cut a magnetic sheet metal to fit in whatever container you want and then place them in the container. They'll stay in place and you won't need to fill empty space with egg foam.

5mm x 5mm flat squares (or similar sized discs) should cost you 3-4 cents each by the 100 and 1 should do fine for plastic and 2 or 3 for the heaviest pewter figures, just flip them over, apply a dab of hot glue and drop a magnet on and press flush with a pin or something, should fit i the bases just fine without changing the height unless bases have changed in the past decade since I stopped buying them. Makes it easy to move large quantities at once without worrying about them sliding around/falling over.

Edit: Kinda like these https://www.amazon.com/Fine-Clutter-Refrigerator-Whiteboard-Magnetic/dp/B01M0XJD3O although these are likely going to be entirely too thick to hide under the base flush

I bought several thousand small square disc ones years ago and use them for everything heh.

Edit 2: exactly like these, except that is way too expensive, definitely check eBay if you don't mind waiting for shipping from China https://supermagnetman.com/collections/neodymium/products/s0510d?variant=11410378691 pretty sure I paid like 1.5-2 cents each.

Edit 3 these should work http://www.magnet4less.com/product_info.php?cPath=1_131&products_id=99 , 6 cents a pop. I mean it has been 10 years or so since I ordered any that small so that might be fair pricing now, eBay does have cheaper but China shipping can take a month or more.

Edit 4: I hate you, I just bought about a hundred bucks of magnets from them. Hooks and ones with countersunk holes because I just thought of like 8491283 things I can do with them for use as storage solutions haha.

Exactly, use cheap poster wall stickies and utilize craft magnets for the wall. This way you can distribute weight horizontally as well as vertically. I also adhere on the inside plastic too and attract them to neighboring boxes for further support.

If you go just the wall route you may wish to do it for every row, currently I do it for every other row, with protected Pops as a foundation for further support. I like the vertical look and hopefully this works for you too, if desired (it can be a little time consuming arranging them to work with magnets).

For complete autonomy, I wouldn't recommend attaching the magnets to the paper of the box (decreases resale value). Only adhere one magnet to the wall and a free magnet on the inside. I would also suggest going to a Joann's or something. They specifically have better magnets and sometimes the ones I get are weaker but Joann's will have guaranteed good ones. It's an experiment after that to figure out how to arrange the best way structurally. I offset Pops like bricks to further increase strength.

Reference if my words are too crude

Edit: Forgot the wall hangings