Reddit reviews General Hydroponics Flora Grow, Bloom, Micro Combo Fertilizer set, 1 Quart (Pack of 3)
We found 44 Reddit comments about General Hydroponics Flora Grow, Bloom, Micro Combo Fertilizer set, 1 Quart (Pack of 3). Here are the top ones, ranked by their Reddit score.
GH Flora Series is the original Building Block Nutrient System imitated but never duplicated; Contains complete Primary, Secondary and Micro Nutrients for enhanced yields and better crop qualityUsers can adjust mixtures to suit specific plant needs; Enhances flavor, nutrition, aroma and essential oils in both hydroponic and soil cultivated plantsContains highly purified concentrates for maximum solubilityPH balanced for ease of use; NASA and Antarctic research scientists choose Flora Series -- because of its superior formulation and reliability
Combination of parts from Amazon and ebay. Not all of them are necessary, fittings and Brute trashcans and such are from Home Depot.
Runs the lights, pump, fans, and other electronics. Kind of excessive. 5A would be enough.
https://www.amazon.com/gp/product/B01E6S0JS4
Don't cheap out on these. Crappy plastic check valves really screwed me early on.
https://www.amazon.com/gp/product/B01KZOCQMA
Needed for priming the pump or flushing the nutrient reservoir.
https://www.amazon.com/gp/product/B018HMFG7O
This was roughly 4x what I actually needed.
https://www.amazon.com/gp/product/B00B8PAAJW
Transplanting the sprouts into this was weird, but they took well to it.
https://www.amazon.com/gp/product/B004IAM29K
Everything I chose was 5/16 inner diameter.
https://www.amazon.com/gp/product/B01CGVJ9QG
Hydroponic pots, specifically for Leca substrate.
https://www.amazon.com/gp/product/B00N9AE9BE
I think that dripping from two feet aerates the water naturally, but this can't hurt.
https://www.amazon.com/gp/product/B00L17IPEO
https://www.amazon.com/gp/product/B01339F5ZO
https://www.amazon.com/gp/product/B01339G2F6
Wait for sales on these! The 270W light is $80 now, but I got it for $60.
https://www.amazon.com/gp/product/B00RWQ4B50
To make the door airtight.
https://www.amazon.com/gp/product/B011CXIPO6
This will be enough for a bunch of grows. A little goes a long way.
https://www.amazon.com/gp/product/B017H73708
Will also last a long time. Only takes a few drops to balance a gallon.
https://www.amazon.com/gp/product/B000BNKWZY
This thing was bigger than I anticipated.
https://www.amazon.com/dp/B00E582DV2/
For making the irrigation loops.
http://www.ebay.com/itm/302176243137
Loud as heck. Ended up using a quieter fan I had around.
http://www.ebay.com/itm/272508816366
Quiet as heck. Rated for 2.1GPM. It's enough, but I think that a 5GPM pump would have been better.
http://www.ebay.com/itm/272403296601
Thanks!
Inside this grow-tent, I'm using 2x VIPARSPECTRA 300w LEDs for the lighting. I have a 4 LPM air pump with tubes running into each container (plugged to air stones). This setup is running on a timer from 6AM to 10PM.
The containers are ~10L (a bit more than 2gal) plastic trash bins from Walmart. I found it was the most efficient containers as they are more high than wide (unlike most standard storage containers), which allows me to fit more in the tent. This also enables the roots of the plants to reach deeper which I think is good (but don't quote me on this).
As for the nutrients I use standard General Hydroponics Flora series. I started with small concentration first, then followed the general indications on the bottles (aggressive vegetative growth until they start to flower, then transition to bloom, and then bloom and ripening).
I topped them all at the beginning when they had about 4 or 5 sets of leaves. I also pruned them a few times, cutting big leaves preventing light from reaching the middle of the plant.
Temperature was kept at between 22°C and 28°C most of the time (71F - 82F). Humidity varied between 35% and 55%.
I also have a Raspberry Pi in there to which I connected (and soldered) a humidity and temperature sensor. I then wrote a little app to send the data to a database and wrote another app to display real-time temperature stats and charts. I did this mostly for fun but it was useful.
This is my first time growing, so please feel free to critique/rip into my setup, as I really appreciate all the help and knowledge! I actually ordered my seeds from JAHseeds a year ago, but never got my shit together enough to actually do anything with them.
 
I do want to take a quick moment to thank u/AFK_ing for the seeds first, as they were actually gifted to me for free. I placed an order on a whim one night, and then completely forgot about it. Turns out that JAHseeds never ended up depositing the interac transfer I sent them, so it inevitably expired. I had forgotten about the order completely, when out of the blue one day I received a letter in the mail complete with 12 free seeds and a handwritten 'apology' letter. This absolutely floored me, and left me feeling super warm and fuzzy inside. I've been cherishing the seeds up until now, so I'm really really happy that I can finally bring them to life :) Anyways....thank you JAHseeds!
 
Onto the setup! Currently running:
 
2x alibaba 240w QB
 
Promix HP + 2inch layer of worm castings on the bottom
 
Strain is The Best My seeds are not feminized however, so still unsure of sex.
 
Right now they are in 1 gallon pots and I'm planning on moving them into 7 gallon fabric pots when the time is right.
 
I kinda went ham one night and bought the entire GH nutrient lineup (including all the additives....) so I'm planning on sticking to their schedule (halved) throughout the grow. I know I could have done without a lot (most) of them, but yeah it was still cheaper than buying an Oz from the LP....Currently only feeding them water.
 
The tent is a GA 48x48x80, with a Vivosun 6 inch duct fan and carbon filter
 
Holmes Lil' Blizzard fan (this thing moves a lot of air)
 
I originally had a smaller tent so I started out germinating 3 seeds by dropping them in a glass of water for 36 hours. After they all popped, I planted them directly into coco pots. At that time I decided to change to a larger tent, so I dropped 2 more seeds into a glass of water to germinate. 36 hours later one of the seeds had popped, but not the other. I planted the one that popped, and left the other in the water for another 12 hours. At this time it still hadn't popped, so I just dropped it into a pot with the others. The one that never popped didnt end up coming through the soil until about 2 days ago (I was actually just about to give up on it). It's the tiny coco pot in the middle. Pretty sure it's gonna be a retard plant but whatever, I'll give it some love and care. Don't tell Justin. The nice healthy plant on the bottom right is the other seed that I germinated with it at the same time.
 
 
Close up shot 1
Close up shot 2
 
 
 
 
tl;dr i love you all
I actually didn't tally up the cost as that wasn't really of a concern to me, but I'll try my best to provide links to the things I bought for this. Feel free to add it up for me!
I also bought various tools, like crimpers, Dremel kit, drill, etc, but I don't consider those to be project-specific as I'll have them for the foreseeable future. Let me know if there's anything you see that you think I missed!
so i would suggest a 1000w MH/HPS setup with a 6 inch inline fan and carbon filter (for the smell). you'll probably need to spend 30$ on nutrients you'll need something to adjust the pH of your feed get a good pH meter blue labs is one of the best brands for this tech, you will also need a 24h timer and then to choose a medium: soil, dwc, soilless, coco, rockwool, etc. that should bring you under budget.
I just transferred some Bell peppers into my system today. Below is the solution I used. Used about 5ml per gallon to get my water around 1400 ppm as I read somewhere they should in the 1400 to 1700 range. I'm just getting into hydroponics myself, and haven't tried peppers before so I've got no idea if this works or not. I did use this for some kale and lettuce and it worked very well (which I understand is totally different). Fingers crossed that I didn't just murder my sprouts. Would be curious to see if anyone else uses this or not.
https://www.amazon.com/dp/B017H73708/ref=cm_sw_r_cp_apa_ZH46Bb4MN2NJW
I used Fox Farms Ocean Forest with General Hydroponics 3 Part Nutrients. Initially I fed until it ran through every other day but that required removing the plant from the bucket. As she got bigger, I opted to feed her 4 cups once daily as removing her from the bucket was difficult. I eventually made that watering tube which made things a lot easier.
Unfortunately I didn't have the foresight to measure from soil to the tallest plant but I would estimate was 24".
Buddy we need to talk. Get this at the very least..
General Hydroponics Flora Grow, Bloom, Micro Combo Fertilizer set, 1 Quart (Pack of 3) https://www.amazon.com/dp/B017H73708/ref=cm_sw_r_cp_api_i_dm.yDbM96AZS2
Past this grab this and you will have a decent perfectly colored harvest. Though there is much much more you can add to get a better harvest..
General Hydroponics CALiMAGic Quart https://www.amazon.com/dp/B00GZRKI40/ref=cm_sw_r_cp_api_i_on.yDbHNH497S
This guide is pretty comprehensive
If you want a super quick start, get some nutrients (I recommend General Hydroponics), 2-3" net cups, rock wool, and hydroton/clay pebbles.
Plant seed in rock wool, put rock wool in net cup, fill the remainder with hydroton, place net cup in a container with some water in it (kratky method), and start watering it until the roots touch the water.
The kratky method is a great beginners method to get into hydroponics. I currently have about 30 plants all doing the kratky.
General Hydroponics is a good brand and mix of nutrients. Its simple to use and doesnt require a scale to mesure stuff out. Use a tablespoon to measure stuff or a syringe.
Buy the PH up/down from GH too but be warned you will need to dilute it first or youre in for a fun time trying to correct your PH. (let me know when you get to this step and I can give better directions.
Get a simple PH tester. It will make your life a lot easier. Once I figured out that adding nutrients to my water brought my PH to around 5.9 I stopped testing everytime. (but i recommend that you do use it everytime)
You DO NOT need to grow in soil first, but like /u/BroposkisRump said you can just be careful washing off the roots. GOTO the youtube channels mentioned on check out Khang Starr's video first.
Some advice:
You cangrow those with no effort.
Thats all I got for now. Once you understand this method try hydroponics using a different method as well.
I grow in soil and this is what i use, and i feel many others do as well.
https://www.amazon.com/gp/product/B017H73708/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Hmm... That makes sense, especially since my last grow didn't have this issue, but this is my first grow using these: https://www.amazon.com/gp/product/B017H73708/
I plan to grow larger variant tomatoes such as beefsteak and want to make sure this kind of layout and these components will be good enough for that purpose.
Here is the list of components I'm planning to use:
​
The remaining plumbing components I need I'll pick up from my local Home Depot.
Flora fertilizers are pretty good/cheap.
https://www.amazon.com/General-Hydroponics-Flora-Bloom-Fertilizer/dp/B017H73708
1. Use something like this, adjust the ratio so that its 1-2-2 Gro, Micro, Bloom OR just follow whatever ratio they recommend for bloom when you get flower formation, before that use the vegetative growth ratio. You want a pH between 6.0 and 6.4, and an EC of 1.4 above whatever EC your water is before adding any nutrients. Always remove the runners; early blossom removal has no effect on yield.
2. Just use day neutral strawberries (get crowns or runners, not seeds):
> Day-neutral strawberries are a modern cultivar developed from everbearing plants. The modern day-neutral varieties were developed to produce continuously all summer and into the fall. In contrast, the older original everbearing types produce two to three separate crops each growing season.
I used this and got fucking amazing results. 3 OZ from a room the same size. I was VERY impressed. I also used Flora ferts. I would highly recommend this light for your exact situation and at $160, you can't beat it.
The General hydroponics Flora series is generally recommended to newbies. https://www.amazon.com/General-Hydroponics-Flora-Bloom-Fertilizer/dp/B017H73708/ref=sr_1_1?ie=UTF8&qid=1487294270&sr=8-1&keywords=flora+series
You can add to it but those three bottles will grow anything you could want.
Most people just add nutes to water, adjust the pH of the nutrient solution as needed to get a runoff of around pH 6.5 or so, and then add the solution to the plants as per the two knuckle rule (stick your finger in the soil and if it feels dry at the second knuckle then do a complete watering).
You can store concentrated nutrients however you want just don't store concentrated multi-part nutrients together in the same container. This will cause some of the nutrients to bind up.
Using a syringe, tiny measuring cup, "soap" dispenser, etc does not matter as long as the nutrient solution is the appropriate strength and pHed before adding it to the soil. With the above 3 part GH Flora fertilizers I like a fertilizer strength of 1200ppm/1.9 EC (I use a TDS meter) and a pH of 6.7-6.8 to get a runoff of around 6.5.
Does the above make sense?
edit- slight correction and TDS stands for "total dissolved solids". I use an older version of this meter that has a 650ppm=1 EC correction factor, which can be different depending on the meter, and this to test pH.
General Hydroponics Flora Grow,... https://www.amazon.com/dp/B017H73708?ref=ppx_pop_mob_ap_share
Botanicare CAL-MAG Plus Plant... https://www.amazon.com/dp/B004JKBMRW?ref=ppx_pop_mob_ap_share
General Hydroponics pH Control Kit https://www.amazon.com/dp/B000BNKWZY?ref=ppx_pop_mob_ap_share
I doubt you have a 3D printer, but this is the pot I use:
Self-Watering Planter (Small) found on Thingiverse.
I also use General Hydroponics nutrients. They're so much better than the nutes that come with the Aerogarden. Here's a link, should last about a year:
General Hydroponics Flora Grow, Bloom, Micro Combo Fertilizer set, 1 Quart (Pack of 3)
Follow the directions on the bottle carefully, ie purple, then green, then pink. Idk why it's in the wrong order on the chart, it's really stupid they did it like that. I alternate every other one with plain water. I use this for both my Aerogarden and potted plants.
Oh, use filtered water, not tap water. Plants don't like chlorine.
So if it is a Nitrogen deficiency, how would I go about solving that in soil? Is there a specific product I need to add? I have this on hand but tbh I'm not entirely sure how to use it. Or something else I should be doing to correct it?
Most use the foxfarm or general hydroponics lines.
https://www.amazon.ca/gp/aw/d/B017H73708/
Yes! I was in the same situation, trying to come up with a small but effective system in college, and in a small apartment.
My design was based halfway off of what I'd seen from Jeb Gardener on YouTube, and the other half just what I could throw together with what I had lying around. Jeb is a little... well... interesting, but very informative.
Basically, what I did was get a 10-gallon flat stacker tote from Walmart, drill holes in it, put net pots in, clay pebbles, and rock wool cubes, and now I have a garden! It's really tough to describe all of the little intricacies with it, but this community has helped me out tremendously. By no means is my system perfect, and in fact, it's super Jerry Rigged and super jank, but it works! This whole process has been a great learning experience. If you have any questions, don't hesitate to ask in this community, or if you want to hear more about my system, feel free to DM me! Here are some photos!
Here are the various things I bought off Amazon to get me started!
pH down (the better kind)
pH meter (not available on Amazon anymore)
rockwool cubes (1.5")
General Hydroponics nutrients
pH up & down (the down didn't last very long, but the up seems to work fine. You probably won't need up near as often as down.)
air stones (these seem to do a fine job. Not the best certainly, but they work.)
clay pebbles (not sure what quality these are, but they do their job! Be sure to rinse very thoroughly.)
net pots (these work fine. Nothing special.)
EDIT: Added links to Amazon
Thanks for the information! That is really helpful.
I'm currently using the GH Advanced Nutrient System - https://www.amazon.com/gp/product/B017H73708/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I was using the GH Go Box nutes, but I switched to the ANS recently. I still have the stuff on-hand, tho. https://www.amazon.com/gp/product/B004PS4B08/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I also ordered some GH Floralicious for this grow, but I have not used it yet.
I use Perlite in two gallon buckets, and these nutrients: General Hydropnics, CalMag both ordered from Amazon.
SImple setup, check out my post here: My setup.. I have most of the details of the setup in the thread.
Water with nutrients is pumped into the buckets 4 times a day, and it all drains right back to reservoir.
I have mine set up outisde, but i've had to put a tarp over the reservoir as it's been raining a fair bit lately.
Sorry forgot to add those.
Lights: Full Spectrum
Nutes: General Hydroponics Flora Grow, Bloom, Micro Combo Fertilizer set
Grow Tent: Grow Tent 96x96x80
Also using Mother Earth Coco+Perlite
Thanks for your reply!
All of the plants have roots in the water, and some of them have new white growth, but not a ton. About 7 out of my 24. I'm still not seeing new green growth on any of them.
I'm using this nutrient mix, with about 5 cups of the recommended mixture dissolved into my ~30 gallon tank. I'm using PH Up and PH Down from Lowe's. I don't know what acids/bases they are, but they're specifically marketed for hydroponics. I've only had to adjust the PH down, from 7.9 to 6.1.
I actually bought some larger plants that are already blooming and fruiting yesterday, so I was planning on refreshing my water and remixing my solution and then transplanting the more mature plants today or tomorrow, but if the crowns can be salvaged I'd like to save them too.
please get some real pH up and down from the hydrostore and pH strips, drops or a meter to get an accurate measure. you dont need to use distilled water if you dont have hard water from your taps. whats your light cycle?
General hydroponics pH up+down w/ drops
https://www.reddit.com/r/microgrowery/wiki/faq
General Hydroponics 3 part
not the same person, but I'm a new grower too and have been reading up a lot on how to care for my clones I've had for about 2 weeks now.
here are some links to often-mentioned nutrient systems:
general hydroponics: https://www.amazon.com/General-Hydroponics-Flora-Bloom-Fertilizer/dp/B017H73708/ref=sr_1_2?s=lawn-garden&ie=UTF8&qid=1479708442&sr=1-2&keywords=general+hydroponics
fox farms: https://www.amazon.com/FX14050-Fertilizer-Nutrient-Hydro-Formula-32-Ounce/dp/B000HY2IXQ
canna: https://www.amazon.com/Canna-CA1260-CA1270-Coco-Set/dp/B000G24ZIU/ref=sr_1_4?s=lawn-garden&ie=UTF8&qid=1479708468&sr=1-4&keywords=canna
not sure if it counts as DIY, but i've been using the General Hydroponics nutrients with no issues. It does mean that you will need to adjust the pH after you mix the nutrients. You dont have to do this with the miracle grow nutrients.
Considering a good grower gets 1g/of LED real watt, you will not meet your expectations of 10-32 ounces with 600$, I am afraid. But have no fear. I am pretty good at budgets and enjoy a challenge so let's see what kind of setup we can generate.
Light - Your biggest and most important expenditure - 250$CADamazon.ca/VIPARSPECTRA-Reflector-Spectrum-Indoor-Function/dp/B01G8GDV32/ref=sr_1_5?crid=3G9VL9397BJLG&keywords=viparspectra&qid=1570768902&sprefix=vipars%2Caps%2C180&sr=8-5
I am an HPS grower that is actively is looking for an LED way out of the cooling I need to provide. I have read amazing things about viparspectra. This light has a real draw of 260W so you will be able to pull a half pound if you dial your environment right.
Pots - Fabric pots are the shit - 20$ CAD
https://www.amazon.ca/s?k=vivosun+5+gallon+fabric+pots&crid=2D5PJJD9PR0B3&sprefix=vivosun+5+gall%2Caps%2C172&ref=nb_sb_ss_i_1_14
I've grown in clay pots, nursery pots, dwc, rockwool cubes and I always go back to promix. And now I use Smart/Fabric pots. They are the tits of my life, ferreal. The handles help a lot.
Dehumidifier - You said you live in a bay area so i assume its humid af - 70$ CAD
https://www.amazon.ca/hOmeLabs-Small-Dehumidifier-Bathroom-Closet/dp/B072C3NMK1/ref=sr_1_4?crid=3RME7E0CJ86SV&keywords=dehumidifiers&qid=1570769281&s=lawn-garden&sprefix=dehu%2Clawngarden%2C173&sr=1-4
​
Nutes - I've used these and have been successful. then again ive used 20-20-20 and been successul - 51$ CAD
https://www.amazon.ca/General-Hydroponics-Florabloom-Floramicro-Fertilizer/dp/B017H73708/ref=sr_1_3?keywords=veg+nutrients&qid=1570769329&s=lawn-garden&sr=1-3
PH adjusters - 30$CAD
amazon.ca/Standard-Hydroponics-Nutrients-Fertilizer-Gardening/dp/B07S1DFL3S/ref=sr_1_1?keywords=ph+-&qid=1570769376&s=lawn-garden&sr=1-1
PH Tester - You fucking need this, hanna is a+ - 140$ CAD
https://www.amazon.ca/Hanna-Waterptroof-Pen-98127-pHep4/dp/B000CNKWNK/ref=sr_1_2?crid=13VXDFKB7DUMQ&keywords=hanna+ph+meter&qid=1570769430&s=lawn-garden&sprefix=hanna%2Clawngarden%2C170&sr=1-2
​
We are at 561$ CAD so 425 USD
Buy cheap ass dirt or go dig some up. I've used garden dirt successfully indoors but you will have to spend extra money fighting bests. Get bagged dirt.
5 gallon bucket to run your sauce - like 5$CAD - go to a hardware store
Hooks and chain - Max 10$ at a harware store
You still havent answered my question about smell. A carbon filter and inline fan combo will run you up another 200$ CAD
so like 650$ USD.
​
Sorry I'm Canadian.
Differs per bottle. Here's the combo I'm using: https://www.amazon.com/General-Hydroponics-Flora-Bloom-Fertilizer/dp/B017H73708/ref=sr_1_2?ie=UTF8&qid=1491276631&sr=8-2&keywords=floragro
The miracle grow is fine for spraying your flowers in your yard but other than that I would steer clear of Miracle Grow for hydroponics.
Your plants will require different levels of nutrients (N-P-K) through their life cycle as well as a number of micro-nutrients. I will have to agree that you want to spend about $33 and get the 3 part Flora series from General Hydroponics. Amazon Link Here
Feeding schedule from General Hydroponics Recirculating is Here
Drain to waste is Here
I this one? How do you use it? There are 3 of them, my plant is still growing
Hey quick question about using coco coir. From what I'm reading using coco coir is considered hydro...but I've also seen people blending coco coir with soil. When using coco coir blended with soil do you have to use nutes like these or are you okay not using those nutes at all and just whatever nutrients are in the soil? I'm reading about NPK and it's not very clear exactly how I achieve those ratios if i'm mixing my own soil and coco coir.
For Nutes I was going to try General Hydroponics, idk if you've tried but some people swear by it on this sub
https://www.amazon.com/General-Hydroponics-Flora-Bloom-Fertilizer/dp/B017H73708/ref=sr_1_1_sspa?keywords=floragro&qid=1550940780&s=gateway&sr=8-1-spons&psc=1
So if I mix grow and bloom into outdoor soil it would give enough nutes to feed the plant? Do you think if I did take this route it would be wise to monitor pH?
So the system I plan to have going is similar to the one in this video: https://www.familyplotgarden.com/building-an-inexpensive-aeroponics-system.html
My basement is half finished, my room is about 18ft by 15ft, and the unfinished part, separated by a door, is about 12 ft by 30ft. Both have about 8ft ceilings. I was thinking of putting it in the unfinished room so I don't get bothered by the light or sound of the pump, but I'm not sure yet. This is my first time attempting hydroponics, so I really have no clue about all the technical details. Is there something you would recommend I grow first that would be easy to manage and not mess up? Also when it comes to lights, what is the difference between the red blue ones and the white ones? And how do I know what height to have them at and when to move them?
Thanks again for the help
Edit: General Hydroponics Flora Grow, Bloom, Micro Combo Fertilizer set, 1 Quart (Pack of 3) https://www.amazon.com/dp/B017H73708/ref=cm_sw_r_cp_apa_MOeKBbX75P0WN. Here's the nutrients I got
So this morning when I left for work all I could see was still the white stem way down in the hole. I got home to my first set of cotyledons and also first of real leaves!
I also got a ph control kit today, and it looks like my ph is sitting right around 6, so I believe that is perfect.
I was planning on just giving this a shot with minimal effort to see how it goes. Growing a variety of herbs in the Aerogarden was super easy, and it was hard to keep all the growth under control.
After doing more reading(because when I start doing something I have to do it right) I realized that the LED panel on the Aerogarden isn't even close to the wattage that anyone else is using. The starter package on growweedeasy.com includes a 250w light. The one on the Aerogarden is 20w, but the directions say you can keep it just a couple inches above the plant, whereas all the other guides for higher wattage lights say they need to be kept much further away. I would guess that is just because they have so much more wattage?
I grow lots of normal plants as well and don't get too much actual sunlight, so I have a couple extra reflectors, CFLs, and another LED grow bulb sitting around. I have 1x LED! and 2x CFL! extra.
How does mixing LED and CFLs work? I'm thinking I will need to get this thing all the light I can. Should I get a light socket extender and splitter so that I can get both the CFLs into a reflector, and also use the extra LED?
I plan on low stress training it to keep it as short as possible as the Aerogarden light only extends 12inches. I am able to extend that a few more inches using that knife with a stick taped to it, but then the cable becomes the limiting factor.
I also don't plan on moving it out of the 1gal Aerogarden reservoir, so it will probably be limited in size by that as well. The aerogarden comes with these nutrients!(4-3-6) that I had been planning to follow their recommendations of use which is basically give it 2 capfuls(maybe a couple mL) every other week when you change out the reservoir water. In between feedings just keep the water level high. Should I actually buy legit nutes!, or will the Aerogarden ones do a pretty good job?
Sooo I guess my questions are:
Anyone grown with an Aerogarden before? How'd it work? Any tips?
Anyone mixed LED and CFL lights before? Is that fine to do?
I should definitely use all the lights currently available to me, and I should probably even get a couple more 42w soft white CFLs right?
My goal was to keep this cheap and easy, but I'm thinking I should also get another timer for all these extra lights I plan on using now. Using the Aerogarden timer for the 20w LED and then turning on the other lights manually probably won't be anywhere near as effective, and also takes away from the easy factor.
Can I use the aerogarden nutes to keep this easy and cheap, or should I get some legit nutes?
Thanks!!
Awesome, thanks! Would the liquid stuff be just as good or is that meant for hydro systems? I’m growing in soil.
I’m looking at this :
https://www.amazon.ca/General-Hydroponics-Florabloom-Floramicro-Fertilizer/dp/B017H73708/ref=mp_s_a_1_3?keywords=general+hydroponics&qid=1568638526&sprefix=general+hydro&sr=8-3
Would it be more wise to go with the full kit?
https://www.amazon.ca/General-Hydroponics-Flora-Performance-Pack/dp/B008UCCCII/ref=mp_s_a_1_2_sspa?keywords=general+hydroponics&qid=1568638598&sprefix=general+hydro&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyU1BPMVJBWTdEQTlZJmVuY3J5cHRlZElkPUEwMzI2MDk4MUI3QUpWQUFDRUY5OSZlbmNyeXB0ZWRBZElkPUEwNzYzNjM2MTdGNUpJSllIQlowVCZ3aWRnZXROYW1lPXNwX3Bob25lX3NlYXJjaF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
So, are you in a pot? How big? Now would probably be a great time to transplant if its in a little pot and is still in veg. It really depends on how big you want to try to get it. Outdoors is different too cause at a certain point its just going to switch over to flower with the light change depending on your latitude.
​
If its a 3 gallon or bigger pot and you want like 1-3 ounces you probably dont NEED a transplant. and can just feed it some Calcium+Magnesium (CalMag) and some of the General Hydroponics nutrients
https://www.amazon.com/General-Hydroponics-Flora-Bloom-Fertilizer/dp/B017H73708/ref=sr_1_1_sspa?crid=33B53J7NBKN8S&keywords=general+hydroponics+nutrients&qid=1562166669&s=gateway&sprefix=general+hy%2Caps%2C142&sr=8-1-spons&psc=1
​
just give a half dose of whatever the recommended feeding is to start every other watering.
General Hydroponics Flora Grow, Bloom, Micro Combo Fertilizer set, 1 Quart (Pack of 3) https://www.amazon.com/dp/B017H73708/ref=cm_sw_r_cp_api_i_S27yDb194YD94
the 3 part set up. amazon link below. I have two 5gal bucket set up. About to replant bc i did not have goo luck with the lettuce and spinach. But the herbs i have (Cilantro and Basil) are doing great. Im going to try adding mint, thyme, rosemary, and probably sage.
https://www.amazon.com/General-Hydroponics-Flora-Bloom-Fertilizer/dp/B017H73708/ref=sr_1_1?s=lawn-garden&ie=UTF8&qid=1485849552&sr=1-1&keywords=general+hydroponics
General Hydroponics Trio takes all the guessing game away from what to use and when. https://www.amazon.com/General-Hydroponics-Flora-Bloom-Fertilizer/dp/B017H73708