Reddit reviews Genround Glass Bottle Cutter, Bottle Cutter DIY Machine for Cutting Wine Beer Whiskey Alcohol Champagne Liquor Round Bottles to Craft Glasses Black
We found 7 Reddit comments about Genround Glass Bottle Cutter, Bottle Cutter DIY Machine for Cutting Wine Beer Whiskey Alcohol Champagne Liquor Round Bottles to Craft Glasses Black. Here are the top ones, ranked by their Reddit score.
Cutting Length- from bottle bottom to cutting point: 5". Cutting Diameter of round glass bottles or mason jars:0.5" to 2"， provide you cut both from the top or the bottom of the glass bottles and mason jars. Suitable with most of beer/wine/drinking glass round bottles (Vodka, Tapered, Champagne, Captain Morgan, Perrier, Pellegrino, Patron, Growler, Grand Marnier, Firestone...If diameter of the bottle is beyond 2”, suggest to use our upgraded 2.1 version)Easy Use and Work Perfectly. Simply place your bottle on the support device, apply constant moderate pressure, and rotate; heat the score over boiled water and cold water alternately bathe three times. Sturdier and easier to use than plastic models, this highly durable metal bottle cutter will have you cutting bottles perfectly in 5 easy steps.Smooth Cutting. The results will amaze you, clean breaks nearly every time. Even thick champagne bottles break easily and smoothly.Long Time Use: The cutter owns 3 cutting blades in a disc. Each blade is made of sharp and hard metallic-Steel. The durability have been tested by 50,000 times cutting and still works sharply and great.Creative And Environmental protection. By your creative recycle ideas and handmade practice, decorate your exclusive beautiful life and help you do your bit for the environment protection.
Just get this, $23 and you're set.
https://www.amazon.com/gp/aw/d/B01EG6TP9A/ref=mp_s_a_1_1/167-5726856-9481462?ie=UTF8&qid=1478979249&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=bottle+cutter&dpPl=1&dpID=4115CJ0rkYL&ref=plSrch
Not OP, but the easiest way to cut glass bottles like this is with a glass bottle cutter like this or this.
I've been cutting bottles like this to make wine bottle candles for my centerpieces and my favors!
I used this glass cutter to etch the glass, then broke it off by dipping the bottles in hot and cold water (back and forth for a few minutes), then sanded the tops for a while.
My advice is if you do it make more then your target number because some break uneven. I made six to get four and just ditched the two worst ones. Ill probably just make those “duds” into candles.
We wanted to do candles in wine bottles for our centerpiece but our venue won't let us do uncovered flames. As a workaround we decided to go with something like this where the candles are inside the bottle.
Of course this meant cutting the bottoms off of nearly 100 bottles, which meant
exploiting our friends for free laborhours of work delabling, washing, scoring, and cutting the bottles.The whole process was pretty smooth, but pretty labor intensive. The scorer worked like a charm but it takes a bit of practice to get a straight score. Still we did lose about 12 bottles but we had plenty of extras as we've been begging our friends and families for all their discarded wine bottles for the last year.
If this is something you're interested in for your wedding here are the tools we used:
https://www.amazon.com/AGPtek-Bottle-Machine-Cutting-Bottles/dp/B0155WMTGU/ref=sr_1_3?ie=UTF8&qid=1475268871&sr=8-3&keywords=bottle+cutter
https://www.amazon.com/Bottle-Cutter-Genround-Machine-Cutting/dp/B01EG6TP9A/ref=sr_1_4?ie=UTF8&qid=1475268871&sr=8-4&keywords=bottle+cutter
The one in the second link works slightly better but they were both decent. Basically all you have to do is score the bottle ONCE around in a straight line, then dunk it in hot near boiling water then ice water back and forth. After a dunk or two it splits right along the line.
I tried making my own cutter and the results weren't always good. The string method was worse (though I didn't give it much of a chance.)
I bought something almost exactly like this
https://www.amazon.com/Glass-Bottle-Cutter-Genround-Machine/dp/B01EG6TP9A
and I can usually get about 9/10 bottles cut with no flaws. Maybe worth the money?
Also: I tend to use a bucket of cooler faucet water for the higher thermal difference (instead of just room temperature), and I never tap it, I just alternate boiling water (I'm pretty generous with it all around the cut), and you can hear it fracture when it hits the cooler water. If you hear that once or twice, you can usually just gently tug the two pieces apart.
You could probably conceal the tiki-ness somehow. Get one of these $22 bottle cutting tools.
Take a dark glass wine bottle. Cut the bottom off. Stick the Tiki torch through the bottle so that the upside-down bottle conceals the torch. You might have to cut the neck end of the wine bottle off in order to make that end big enough to fit the torch through.
Then figure out a way to hold the bottle in place. Maybe tie a short stick crossways below the bottle so the bottle can't slide down.
Bring the tube to any place that does glass work, like windows and glass tables and what not and ask them to cut it, or buy cheap bottle cutter and cut it yourself
​
https://www.amazon.com/Glass-Bottle-Cutter-Genround-Machine/dp/B01EG6TP9A