Reddit Reddit reviews Genuine Honda 08798-9013 Silicone Grease

We found 16 Reddit comments about Genuine Honda 08798-9013 Silicone Grease. Here are the top ones, ranked by their Reddit score.

Automotive
Oils & Fluids
Greases & Lubricants
Automotive Lubricants
Genuine Honda 08798-9013 Silicone Grease
Genuine Honda partUsed for lubricating door seals, window channels, sunroof seals and any convertible or targa top seals on your Honda or Non-Honda vehicle.
Check price on Amazon

16 Reddit comments about Genuine Honda 08798-9013 Silicone Grease:

u/IamaBlackKorean · 20 pointsr/AutoDetailing

I've gotten to using this: https://www.amazon.com/Genuine-Honda-08798-9013-Silicone-Grease/dp/B00GD49GTS

Apply with terry cloth rag and wait a few, and wipe off. I have yet to replace any seals, including on a 2 decade old VW that's been parked outside in California sun.

u/vzwire · 8 pointsr/Miata

www.amazon.com/dp/B00GD49GTS/ref=cm_sw_r_sms_c_api_i_qLwRCbBF096K4

I played that game everyday for a year, until I discovered this on the interwebs.

u/Desmocratic · 7 pointsr/cars

Good call on the seal grease, I use the Honda stuff on my BMW Z3 seals, you can buy it on Amazon:
[Honda Grease](https://www.amazon.com/dp/B00GD49GTS/ref=cm_sw_r_tw_dp_U_x_reGiDb5BKM8D3 via @amazon)

u/IRMuteButton · 3 pointsr/Miata

Here's the Shin Etsu grease on Amazon. It's actually a Honda part and useful for all kinds of things. It has the consistency of soft butter.

u/AaronCompNetSys · 3 pointsr/Miata

$15.93 via Amazon Prime - Genuine Honda 08798-9013 Silicone Grease (Thanks, u/tadfisher)

It's a common topic, but many simply have not come across it. This Shin-etsu is what Japanese OEMs use to keep rubber weather stripping like new. It can rejuvenate stuff you though needed replaced, everyone should have a tube of it and treat yearly to bi-yearly, on any vehicle.

Use gloves, apply a very thin layer, allow to sit for at least an hour. Wipe off excess with moist cloth towel.

Posting this because Tom was recommending the cheap generic stuff.

u/falkentyne · 3 pointsr/MechanicalKeyboards

You can buy 100g of Shin Etsu g-30m for $15 dollars.

https://www.amazon.com/Genuine-Honda-08798-9013-Silicone-Grease/dp/B00GD49GTS/ref=sr_1_fkmr0_1?ie=UTF8&qid=1484511084&sr=8-1-fkmr0&keywords=Shin+Etsu+G30M

https://www.amazon.com/Honda-Genuine-Shin-Etsu-Grease/dp/B006Z9TZ9M/ref=pd_sbs_263_1?_encoding=UTF8&psc=1&refRID=WEKT07SSDX3GN5H49VKM

G-40M is available from focusattack but it's more expensive.
https://www.focusattack.com/shin-etsu-g-40m-silicone-grease-100g/

They all perform the same so its not worth paying the extra $10, and Sanwa themselves said that you can use G-30m on their joysticks just fine.

Shin etsu ALSO makes thermal compound for CPUs but this is NOT the same thing. This is VERY high quality silicone lube.

While the best way is to disassemble the top of the switch, only PCB mount switches can be accessed this way without soldering (a removal tool is on mechanicalkeyboards.com). You can just find something needle nosed or pinhead thin and press the switch down and squeeze a little into each side of the switch. You don't need a lot.

u/NismoGrendel · 2 pointsr/Miata

Thats awesome, you dont need to mangle the cables now.

Unbolt window, pull it out following that guide. Also check out this guide which has some good info to get regulator/motor out:
http://www.blueridgemiataclub.org/technical/miata-window-regulator-replacement-manual-power-windows/

There are a bunch of youtube vids that also show how to pull regulator, might be useful to watch a couple to see different explanations/angles/techniques.

You should be able to unbolt the regulator and the window motor, unclip the clips that hold the cables to the door, then remove both together thru the hole by your speaker.

Pry open the motor case and see if your wheel/cable is screwed. If it is, the quickest fix is to buy something like that amazon link below. I have seen other articles where they just replace the plastic wheel and get a cable made at a motorcycle shop. Buying the part was simplest so thats what I did.

Also, go ahead and order this shin etsu grease:
https://www.amazon.com/dp/B00GD49GTS/ref=sxts_k2p-hero-vn-pb_bs_1?pf_rd_m=ATVPDKIKX0DER&pf_rd_p=8477664412492203526&pd_rd_wg=HdW1I&pf_rd_r=NMVKGMV6Z0D5G0F3W4ME&pf_rd_s=desktop-sx-top-slot&pf_rd_t=301&pd_rd_i=B00GD49GTS&pd_rd_w=kyo5x&pf_rd_i=shin+etsu+grease&pd_rd_r=1de7bf26-7283-4357-bbce-bffd9e7018c7&ie=UTF8&qid=1527641297&sr=1

Use that on your window channels, the slot the window bushing slides in, etc.

You can also replace your window bushing w/ a delrin bushing - I haven't done this yet.
https://mossmiata.com/window-bush-improved-replcmt-delrin-2

I just cleaned up my existing bushing and lubed it up with shin etsu grease.

My windows aren't perfect yet but they go up and down now, I'm going to tear into both sides in the future and clean them up/replace bushings.

u/Astronom3r · 2 pointsr/Miata

Since your car is 15 years old it could very well be that your window guides are rotted and falling apart. I have the Delrin replacement kit from RSpeed and it's awesome. Took me about an hour per door, and that's just because I'm slow meticulous. Don't forget to clean everything and regrease all moving parts with ShinEtsu (accept no substitute).

u/novareddit32 · 2 pointsr/300zx

Ah I see what you mean now. I can’t recall seeing that for sale anywhere. Is yours leaking or cracked?

When I had a ttop Z and I had a little leak, I bought this grease off Amazon that kind of brought the rubber back to life and softened it up and “thickened” it out if that makes any sense.

Honda Genuine 08798-9013 Silicone Grease https://www.amazon.com/dp/B00GD49GTS/ref=cm_sw_r_cp_api_6NMYBb6YYEP9N

u/QuiteARoughCustomer · 2 pointsr/FiestaST

I know some people swear by this stuff to help rejuvenate the rubber. I use this as preventative maintenance on my visible rubber seals, but it definitely won't help restore seals that are already sun-damaged.

u/dsatrbs · 2 pointsr/kia

rub the seals of the door with silicone grease (the best is Honda Shin-Etsu Silicone, but any cheap tube of silicone grease would probably do fine). I would imagine that pam would get sticky/tacky after awhile and be counterproductive.

u/Godly1n · 2 pointsr/Miata
u/Coompa · 1 pointr/MechanicAdvice

You can go over the rubber with a silicone lubricant on a cloth. May help the wind noise.

https://www.amazon.com/Genuine-Honda-08798-9013-Silicone-Grease/dp/B00GD49GTS

u/tadfisher · 1 pointr/Miata

Why did you link to the non-prime listing?

Happy Prime Day

u/agent_of_entropy · 1 pointr/cars

It's a whopping $1.02 cheaper here.

u/na_im_good · 1 pointr/DelSol