Reddit Reddit reviews GoControl WA00Z-1 Z-Wave Scene-Controller Wall Switch (White)

We found 15 Reddit comments about GoControl WA00Z-1 Z-Wave Scene-Controller Wall Switch (White). Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Electrical Equipment
Electrical Switches
Electrical Wall Switches
Electrical Light Switches
GoControl WA00Z-1 Z-Wave Scene-Controller Wall Switch (White)
Controls Z-wave Light Bulbs, Switches & Dimmers WirelesslyBuilt-in Z-wave RadioPlug & Play Simple SetupFits Over An Existing Wall Switch. Works with different types and brands of Z-Wave LED Light control devicesManually Turns On, Off Or Dims LightsPowered by 2 pieces of standard CR2032 Lithium Coin Cell with long battery life
Check price on Amazon

15 Reddit comments about GoControl WA00Z-1 Z-Wave Scene-Controller Wall Switch (White):

u/forgottenpassword778 · 4 pointsr/homeassistant

Man, I'm really getting some use of this link today lol.

Basically it's a Z-Wave scene controller that goes over the existing switch. You leave the switch behind it, in the on position, and use the buttons on the controller. With the ZHA integration I can see separate Z-Wave events for both buttons for single press, long press held down, and long press releases.

It's not pretty, probably not better than the Shelly idea, but it's different.

u/nomar383 · 4 pointsr/homeautomation

I have one of these:

GoControl WA00Z-1 Z-Wave Scene-Controller Wall Switch (White) https://www.amazon.com/dp/B01BKWG9XS/ref=cm_sw_r_cp_api_0QIRybNX5PVH7

Battery powered. Also comes with another faceplate that makes it about half the size that picture shows. Supports tap and also hold functions I believe. You would have to double check compatibility with your controller.

u/FloatOldGoat · 3 pointsr/homeautomation

So does GoControl, and I love it specifically because it leaves the swich in the on position. Installation is a breeze, and the switches are only $15 on Amazon. (Note, technically, it's a button, not a switch.)

Edit: Here's a link:
https://www.amazon.com/dp/B01BKWG9XS/

u/ctruit01 · 3 pointsr/smarthome

Here's an option to consider. If you go with a SmartThings hub and compatible devices including this switch that covers the existing physical switch, it's entirely possible to have a physical switch that refuses to turn lights on after it is pressed during the night while allowing it during the day (providing your WiFi lights work with SmartThings - the list is here). It will take some advanced programming using webCORE (the super powerful web-based SmartThings automation system) but it sounds like it would be incredibly useful for your particular situation.

u/kigmatzomat · 2 pointsr/homeautomation
  1. Correct. All controllers can pull that off however you should keep in mind some controllers (wink/smart things) lose some functionality when the internet (or their cloud) is down.

  2. Odds are you can do what you want but I'm not sure when you'd want to eliminate local control entirely.

  3. Wifi device support is pretty sketchy across the board. Assuming the pond pump is run off your house panel, you could just add a zwave switch where the wiring leaves your house. Or if you don't have space for a gang box switch, you could add these in your house: https://www.buydig.com/shop/product/AEONDSC27/Aeon-Labs-Aeotec-Z-Wave-Micro-Dimmer-2nd-Edition-DSC27103-ZWUS

  4. I don't have wink, so can't say. I'd suggest comparing it to something like the RTS CT101 (aka Lowe's Iris) zwave thermostat. It works with a huge range of HVAC systems and is quite inexpensive.

  5. Any zwave switch will do, assuming you don't need a dimmer.
    The device you want is called a "scene controller" and there are actually lots of them. I think for your uses you might like this one:
    https://byjasco.com/products/ge-z-wave-wireless-keypad-controller

    or https://www.amazon.com/GoControl-WA00Z-1-Z-Wave-Scene-Controller-Switch/dp/B01BKWG9XS/ref=sr_1_1?ie=UTF8&qid=1499479563&sr=8-1&keywords=zwave+scene+controller+battery

    I have a couple of minimotes (https://www.buydig.com/shop/product.aspx?sku=E1AEONMINIMOTE ) in my house scattered around. The rechargeable batteries are generally good for ~2 months. I use a label maker to make the buttons purpose clear. My minimotes general have one button for thermostat up, another for thermostat down, and then two different lamp/lighting functions.
u/Hilbe · 2 pointsr/Abode

I'd try something like this:

GoControl WA00Z-1 Z-Wave Scene-Controller Wall Switch (White) https://www.amazon.com/dp/B01BKWG9XS/ref=cm_sw_r_cp_apa_OVnkzbF6605V6

However, I defer to the community if there's something confirmed.

u/SirEDCaLot · 2 pointsr/smarthome

A lot of this depends on how the fan and lights are wired.

In general, there should be two circuits in the fan- one for the fan motor, one for the lights. That means two pull chains since you say you use chains.

Complicating this is the fact that you have one and only one on-off switch, which probably kills power to the whole fan fixture.

If this were me, I'd hardwire the switch so that it ALWAYS supplies power. Or just cover the switch with something like this.

Then I'd get two Micro Switches or equivalent, and put them above the fan. One controls the fan motor circuit, the other controls the lighting circuit.

I'd then replace the pull chains with momentary pull chain switches and wire those into the micro switches to activate them.

End result of this- fan and light have working local control with the pull chains. The switch location has an on/off button that you program to turn on fan or light or both. And both are addressable in Google Home.

Also note- the products I linked are Z-Wave. To make them work with Google Home you'll need a hub to sit between Google Home and Z-Wave. Vera is a good choice, SmartThings works too.

You could get WiFi products instead- Here's a micro switch and while I couldn't find a switch cover plate like the Z-Wave one, there are a lot of WiFi light switches you could hardwire in as long as you have a neutral wire in the light switch box. Just wire hot to load (so the fan is always powered) and connect the switch to neutral and hot (so the switch gets power). Thus switch isn't actually switching anything, just sending a WiFi signal for Google Home to react to and turn on fan / light / etc.
While WiFi products don't require a hub, it does mean if you ever reset your WiFi password you'll have to dismantle your ceiling fan.

u/Roygbiv856 · 2 pointsr/smarthome

Here's an option

u/justabigphony · 1 pointr/smarthome

> but you don't cover them with Z-wave buttons, you cover them with a regular combination light switch

I meant something like this to go over the actual switch. Then I leave the real light switches on at all times, and use the z-wave buttons or Home Assistant to control the relay.

Good point on room in the box, too. I'll definitely need to check that out before I buy it

u/johnkiniston · 1 pointr/homeautomation
u/jam905 · 1 pointr/winkhub

The range is not as good as z-wave. It operates at 2.4 GHz v/s 908 MHz. The higher frequency makes it less penetrant through commonly used building materials.

Another possibility is the GoControl battery-powered z-wave switch, but I don't know if it works with Wink. It would be terrific for your use if it did.

u/Bruck · 1 pointr/zwave

this one looks quite interesting. I'm making the assumption that after installing this, I could configure one button to open 1 garage, and another to open the 2nd? https://www.amazon.com/dp/B01BKWG9XS/ref=psdc_7459508011_t2_B00GL6B4GG

u/socketfail · 1 pointr/homeautomation

The Linear/GoControl WA00Z-1 might work for you. Just program it to associate with the Z-Wave bulb. Looks like it's available in a bunch of places.

Amazon

HomeSeer

Jet.com