Reddit Reddit reviews Hach 145300 Total Hardness Test Kit, Model 5-B

We found 12 Reddit comments about Hach 145300 Total Hardness Test Kit, Model 5-B. Here are the top ones, ranked by their Reddit score.

Industrial & Scientific
Test, Measure & Inspect
Hardness Testing Equipment
Surface & Hardness Testing
Hach 145300 Total Hardness Test Kit, Model 5-B
Water hardness is caused almost entirely by calcium and magnesium ionsHardness increases soap consumptionHardness test kits include the inexpensive Models 5-B and 5-EP
Check price on Amazon

12 Reddit comments about Hach 145300 Total Hardness Test Kit, Model 5-B:

u/lethpard · 7 pointsr/gifs

There are maps like this, and you'll see mineral deposits where water evaporates like on pots and pans, or around the faucet. As well as test kits.

u/glitch1985 · 4 pointsr/HomeImprovement

My father used to work for the city water department and this is one of the ones they used regularly. http://www.amazon.com/gp/aw/d/B008FM7WLU/

u/Indemnity4 · 4 pointsr/chemistry

Remotely diagnosing "bad" tasting water is not easy, but not impossible. Lets err on the side of caution and assume that in a wealthy county of Texas you don't have a well contaminated with nasty stuff.

It sounds like you have what is called "hard" water. There could be other trace impurities too, such as sulphides or alkaline ions.

Hard water just means there are a lot of dissolved minerals, such as calcium and magnesium. You can purchase some filtration systems depending on the amount of water you want per day.

The main issue is you will get a lot of scale buildup in your pipes. That is bad, especially in a new build if you don't have a total house filtration system.

A simple test kit like this Hach unit will help you start to diagnose the problem.

Can you answer these questions and we will try to remotely diagnose your problem.

  • Have you noticed any white solid starting to form on the heating element of your kettle or coffee pot?

  • Does your soap or shampoo not foam up the way it should?

  • If you put an open-top jug of tap water in the fridge overnight, does the taste change?
u/insulation_crawford · 3 pointsr/Austin

I ordered a hardness testing kit. When it gets in, I'll maybe post some results.

I normally use Rectorseal Calci-Free for flushing. Pretty sure that stuff is muriatic acid. In my opinion, it works better than vinegar. This last time around, I ran it through the heater for about 45 minutes. Probably should have run it longer.

If you can take this guy apart, please let me know how you did it.

u/smeds128 · 3 pointsr/espresso

I use an in-tank filter, but also have softened water so I rarely need to recharge it (I do a hardness test monthly with this to make sure).

Daily routine is three water-only backflushes.

Once a week I do a Cafiza backflush.

I descale once a quarter.

I agree that reliable info is hard to find. Chris Coffee and WLL give different opinions on what is right, but this is what I've settled on.

u/shortyjacobs · 3 pointsr/HomeImprovement

Get a real hardness test first. Money well spent.

Hach 145300 Total Hardness Test Kit, Model 5-B https://www.amazon.com/dp/B008FM7WLU/

Then get a water softener. Put it after your filters. They are easy to install if you have done any plumbing work. I got this one, it’s great (edit: size your water softener based on your hardness test! I had 19 grains hardness. You want to run a week between regen, give or take, with a 20% buffer. 19 grains x 4 people x 75 gallons per day x 7 days x 1.20 buffer is 47,880. I got a 48,000 grain softener):

Metered water softener with 3/4" Fleck 5600SXT control, 48,000 grain capacity with by-pass valve https://www.amazon.com/dp/B000GBZ2P6/

My water was quite hard, around 19 grains. The softener fixed that, but made it taste like mud.

So I got an RO system and plumbed it to my fridge only. That was easy too. Took me a couple hours total.

I got this one:

iSpring RCC7 High Capacity Under Sink 5-Stage Reverse Osmosis Drinking Water Filtration System and Ultimate Water Softener- WQA Gold Seal Certified https://www.amazon.com/dp/B003XELTTG/

It’s been a trouble free year now with great tasting water. The showers are a bit slipprier, yes, but my kids are less itchy, and gross shit doesn’t grow over every water source in my house any more. Worth it.

u/Shoobedowop · 2 pointsr/Plumbing

https://www.amazon.com/Hach-145300-Total-Hardness-Model/dp/B008FM7WLU

if water it hard, try posting water softener info and pics to terry love water softener forums. smart group of guys there that know about varies valves, etc.

u/Mr_Quagmire · 2 pointsr/HomeImprovement

There is no "common setting." You need to figure out how hard your water is. I'd recommend this kit since it's very accurate and not too expensive: https://www.amazon.com/Hach-145300-Total-Hardness-Model/dp/B008FM7WLU

Otherwise, your municipality probably has a water report that you can lookup online or request from them that might have hardness information.

If you just want the softener to work, set it to 50 and see if you end up with any hard water before it regenerates. If so, adjust up as needed. If not, adjust down until you find the right number. A higher number won't hurt anything, it will just waste salt.

u/blackinthmiddle · 1 pointr/HomeImprovement
u/homemadetools · 1 pointr/HomeImprovement

This is the water hardness test kit we use: https://www.amazon.com/gp/product/B008FM7WLU/ . It's slightly more expensive than the test strips, but it's a lifetime supply.

u/convoluteme · 1 pointr/Plumbing

You can do a test at home if all you are looking at is hardness. I've seen this recommended. If you are on municipal water there should be water quality reports available.

u/Audiofyl1 · 1 pointr/Plumbing

I’ll see if we get anywhere with the testing kit and actually turning the softener on. If it works, I’ll see about getting the other information you specified to see if it’s set close to where it should be.

Based on this test the hardness is 30 before running the softener.

We do have an iron filter in line ahead of the softener and the tank was just replaced a month ago or so due to it being close to full and a recommendation of the previous homeowner to replace it in 2015 (we found an old invoice for that).