Reddit reviews Handbook of Model Rocketry

I got started with friends, just going out and launching some kits a friend had built. Then I thought I should get my own to have some time, in case we did it again. I meant to just get a few pre-made rockets so I wouldn't have to do any building or mess anything up.

I went on Amazon, and saw a rocket called Der Red Max by Estes - it's in this video several times. It's a classic Estes rocket that's red and black and styled a bit like the Red Baron's airplane. It was so cool looking, and was only 17 bucks, but it required assembly - something I was nervous about. But they only had one left, so I bought it, carefully read the instructions, and put it together, and it turned out looking beautiful. Once I launched it, and it worked and flew so well, I was hooked.

From there, I started reading stuff online. There is a TON of information and resources out there. A good website to ask questions is The Rocketry Forum (TRF) - especially the beginner's section. There are a lot of experts there who will help you out.

There are lots of ways to start, but I recommend starting by getting something called a launch set or launch kit. With this, you get a rocket (or two), plus a launch pad and launch controller for less than you'd pay buying these things separately. I didn't have one right away, since I was using a friend's equipment, but I wanted my own, so I got one. I gave the rocket away to a kid who came to a launch, but I still have the pad and controller.

Several rocket companies, particularly Estes and Quest Aerospace, have these. My own recommendation is to start with Estes, as it's the most prevalent company, and you can get everything you need through them.

You can get an Easy To Assemble ("E2X) or Ready-to-Fly kit, or if you want to do some assembly, you can get what's called a Skill Level 1 kit. These are not difficult, but require a bit of cutting, sanding and gluing, and the ability to read and follow directions.

The Launch Kit gives you everything you need to get started except motors - sometimes called "engines" (doesn't matter - they make the rocket go up) - and recovery wadding. You'll need some of that (there's other stuff you can use - cheaper stuff, too, but when you're just getting started, it's the easiest).

Get the kit, follow the instructions, and buy the motors recommended on the package. Read and follow the National Association of Rocketry (NAR) Model Rocket Safety Code. This will help you avoid hurting yourself or someone else, which could put you off the whole thing.

Go out and launch your rockets. Then, when you've inevitably decided you want to do more and know more, check out TRF, and get yourself a copy of The Handbook of Model Rocketry by G. Harry Stine and Bill Stine. It's required reading. Won't tell you much about how to assemble kits - they all come with instructions anyway - but it will help you understand the important basics of the hows and whys of model rockets.

I've got a blog in which I've been detailing my learning process of building and launching rockets over the last six months, and I also try to pass on information to people just getting started - rocketry for beginners by a beginner - so that they can maybe learn from my mistakes. Check it out, if you want to, and send me an email, and I can send you some more information if you'd like.

This is a really fascinating, fun hobby, and there's so much to learn. It can get really sophisticated and amazing - I like to tell my friends "it's not just for Webelos any more."

Edit: Oh, and if you're already past the part of building and launching a couple rockets, then I'd get that book and head straight for TRF - those are the next logical steps, I think.

Edit #2: Here's a more detailed post on launching your first rockets.

Handbook of Model Rocketry