Reddit reviews Hario V60 Paper Coffee Filters, Size 02, 100 Count, Natural - Tabbed
We found 14 Reddit comments about Hario V60 Paper Coffee Filters, Size 02, 100 Count, Natural - Tabbed. Here are the top ones, ranked by their Reddit score.
Hario V60 cone shaped disposable paper filters for pour-over brewersEach filter is for single time useContains 100 disposable natrual tabbed size 02 paper filtersCapacity of Size 02 is 1-4 cupsDesigned in Japan to fit the cone shaped Size 02 dripper
Do a pour over with freshly ground coffee on a v60 filter. Very fast, cheap, and fresh. You wont need milk or sugar.
What electric kettle do you have? Does it have variable temperature controls and/or a gooseneck spout?
The main ways to improve your setup are a better grinder, better coffee beans, and possibly a better kettle (I'd say, in that order). The other thing to think about is trying out some other brew methods, at least so you can learn about the differences and find out what your preferences are.
If I had your setup and up to $200 available to improve it, I think I'd look for a refurbished Baratza Encore ($99), a $10 - $15 electric scale accurate to within 0.1g, a clear plastic Hario V60 for $6 (along with filters for another $6). That's around $125, leaving extra to try out some nicer coffee beans. For example, Happy Mug has good quality coffee for $11 - $13 per pound plus $3 shipping.
You don't have to spend that much for good coffee.
You can get a pour over dripper for $12 on Amazon
100 filters for $6
Electric kettle for $12
Manual coffee grinder for $10
Digital scale for $10
That's $50 for gear, (you can probably pick up some of that even cheaper if you look around) and then you can spend what you want on beans. I'm really into Stumptown coffee right now, which is $18 for 12oz. but you can definitely go a little cheaper or a lot more expensive depending on your tastes.
You can spend as much as you want making coffee, but I haven't noticed a discernible difference between coffee from that setup and coffee from a $500ish setup. A large part of what makes a cup of pour over good is the skill level of the person pouring it, and there's no reason to spend more than $75-$100 on gear until you reach a point where you know for sure your bottleneck is your equipment. I've been making my own coffee this way (as well as french press and espresso) for a few years and I still don't feel like I need to upgrade.
EDIT: Ignore the scale I linked, refer to /u/throwswithfats comment below instead.
I just recently got the V60 for myself and I love it. I'm not by any means a perfectionist when it comes to my techniques, but I can most definitely notice the difference between this and my old brew methods (French Press / Drip).
I got the all glass setup with an all stainless steel electric kettle. It doesn't have variable temp, but I can guess well enough. I was going to go with a metal filter but decided against it. Natural filter papers are fine IMO.
Cleanup requires you to simply ditch the filter with grounds and then follow that up by rinsing out the containers. Not bad at all. In regards to your worry about knocking your current setup over, this setup (dripper and pot), are just set one on top of another. Just be weary of that as well.
Links if you're interested:
Hope this helps!
Okay, so I'm with you on backpacking as light as possible but I also love an excellent cup of coffee in the morning while waking up in the morning in the mountains. I carry a Snowpeak Collapsible Pour Over Drip and some v60 filters along with ziplock sandwich bags filled with 20g of ground coffee for each cup when camping. I put it over my backpacking cup and the ziplock then serves as trash for the filter and grounds to bring out of camp site. For me this is about as ultralight as I'm willing to go but it's damn near the quality of Chemex coffee anywhere I hike or ride my bikes to. It's also pretty cheap. IMO nothing else really comes close to this setup for backpacking.
I started getting into coffee nearly a year and a half ago, and here is what I did to start:
I bought
Now, bear in mind that I knew that I loved coffee before I invested all this money into it; you should obviously really consider your situation and really get into "good" coffee before splurging on all of this equipment. I now have a French press, a moka pot, and am going to invest in an Aeropress soon, but I still prefer the pour-over method to any other coffee that I've had, thus why I recommend you go that route. It can take some definite getting used to and has a bit of a learning curve, but it is easily worth the effort (tutorial videos will help immensely.
Keep in mind, you needn't buy exactly what I did. Shop around, see what you like and what is in your price range. I will say this, however: if you do go the pour-over method, go for the V60 or the Chemex, they are both easily the best on the market, and the same goes for the Buono kettle, though if necessary you can purchase a different kettle, just so long as it is a gooseneck (which is required to finely control the flow of water).
Many other people will tell you to go with a French press. This is good advice as it has a very slight learning curve in comparison to pretty much every other method (besides maybe the Aeropress, depending on who you talk to): it is literally grinding the coffee coarsely and letting it sit in water for X-amount of time. It also does not take filters, is easy to clean, and is a relatively cheap initial investment (~$20). I like the Brazil model that Bodum makes.
No matter which method you choose to brew with, there are three things that you should not underestimate the importance of (and thus should not skimp on):
Best of luck. There's a lot of good knowledge on this sub, on this sub's How to Coffee: A Primer, and on the Internet in general. Check it all out, pick your path, and enjoy the ride!
V60 Personally I'd get the glass or ceramic one, but they are a bit more.
Filters
Gooseneck kettle with thermometer Warning, I don't have this personally, but it does have good reviews. There are a number of gooseneck kettles on amazon to choose from.
There's a Hario Skerton for $15 used in excellent condition right now
Total=$55.38 Slightly more if you miss out on the Skerton. Beans extra of course. You could make do with whatever kettle you currently have but the gooseneck makes things exponentially easier. Something you could always save for though.
IDK what you're looking for taste wise for beans, but I like Red Bird for reasonably priced coffees that are extremely tasty.
So I'm breaking in a Baratza Virtuoso (Refurb), and have noticed a few things with the beans I'm grinding Saint Frank Decaf. Hario V60-02 with tabbed filters. I've ordered the 'originals' just to see if it makes a difference.
Looking at the Tetsu Katsuya method, the ideal pour completion time is around 3:30 seconds. I've seen other suggestions in the 2-3 minute range for completion.
I'm grinding at a 30 on my Virtuoso, and with the Katsuya method and 20g of beans it takes about 4:30 before everything drips through. What I'm tasting is a little too sour/acidic. Maybe the coffee compass is biasing me, but I'm pretty sure I'm under extracting.
Some of the better pours I've had with this coffee took 4 to 6 minutes to complete (60 bloom, 70 pour, then two 95g pours for a total of 320g water to 18-20g beans). Trying to grind coarser to get finished at 3:30 results in water going through so fast during the beginning stages I don't think the bloom is actually happening.
Maybe it's just the beans - I've read on Home Barista to really not let the 'finish' time get your goat, and do what tastes best. Which I think I'm going to do from now on.
One thing that did sort of bother me is that increasing coarseness does not always seem to correspond to a reduced finish time. Maybe the steps are just that small, but going from a 25 to a 30 should result in a linear reduction in finish time. I feel like I've seen timings all over the map. I need to start over, but I can't shake the feeling that maybe these beans (or the virtuoso?) are producing a lot of fines that clog up the brew towards the middle/end pours. If someone has any insight into this, it would be super helpful.
I haven't yet stripped down the virtuoso to check the adjustment screws. I'm hoping to avoid that. Part of me is wondering whether this particular bean might be better suited for another brew method, like french press - I'm assuming the presence of fines would be less of an issue, but that's just a guess.
I had the same problem and it was so frustrating. This was recommended to me and I haven’t had one break since!
Hario V60 Paper Coffee Filters, Size 02, 100 Count, Natural https://www.amazon.com/dp/B001O0R46I/ref=cm_sw_r_cp_api_i_rQCaBbF1Y01N5
Note that this will require Filters which run $8/ 100-pack from the unit manufacturer
Seeing that the dorm space is definitely a temporary thing, I'd highly recommend a Hario V60 pour-over setup.
You can use an electric kettle for the water, the filters are inexpensive for the Hario but you might have to buy online since you can't really find them anywhere in physical retail. [Amazon has them here.] (http://www.amazon.com/Hario-Count-Coffee-Filter-Natural/dp/B001O0R46I/ref=sr_1_1?ie=UTF8&qid=1415319722&sr=8-1&keywords=hario+v60+filters)
If you like the Hario V60, you can still use it for a quick cup of drip after you're out of the dorm. I've always found that it gets the best of the flavors out of the grounds every time.
I've got a pretty high quality dorm setup that is approved. Here are your options:
Option 1:
Hario ETL Certified Kettle
Hario V60
Filters
Hario Skim Grinder
Total: $119
Option 2:
Aeropress
Proctor-Silex Water Kettle
Hario Skim Grinder
Total: $66
Currently, I'm using the first setup. The v60 is a great pourover method. You'll be having the best coffee on campus. However, since it requires the gooseneck kettle it runs a greater price. Last year, I had option. The aeropress is a kick-ass coffee maker, and you can get by with the way cheaper water heater since pour method has no factor on the brew. Either way, you'd have the small hand grinder which is cheap, easy to clean, and does a fantastic job.
Either of these will make a solid cup, better than anything you'll find in a keurig.
Get this and these filters for doing pourover.
You might also want this grinder, unless you want to have your local shop grind for you as well, which they will. Tell them you're grinding for pourover so they'll know how coarse.
If you decide to also get the presspot, you'll need to grind differently for that, which is why I recommend buying the grinder also. Not to mention, it's super helpful to be able to grind your own, so you can dial in your brews. Additionally, whole beans stay fresh longer than ground coffee. You'll definitely notice a difference between fresh ground and the very end of a bag of ground coffee.
All you need other than that is a way to heat water, and some beans. Do you have a kettle of some sort? Stovetop or electric will work. You want to avoid using your keurig to make hot water, as it doesn't get hot enough.
A pour over set up can be had for quite cheap.
Hario V60 Plastic Coffee Dripper, Size 02, Clear https://www.amazon.com/dp/B001RBTSMM/ref=cm_sw_r_cp_api_i_WcZ5AbRMPN9JG
Bonavita 1.0L Electric Kettle BV3825B https://www.amazon.com/dp/B005YR0GDA/ref=cm_sw_r_cp_api_i_TeZ5AbY1C3CZG
Hario V60 Paper Coffee Filters, Size 02, 100 Count, Natural https://www.amazon.com/dp/B001O0R46I/ref=cm_sw_r_cp_api_i_yfZ5Ab8GY8NBT
$5.67 + $6.21 + $29.34 = $41.16
I realize you’re using euros so it will be slightly different. And honestly if you got a different kettle you could cut out 10 or more dollars to get you into the ~30 USD range which from what I can tell would be saving you money. Just make sure it’s a gooseneck and keep in mind the fewer times you have to rebuy something the likely less cost efficient it is.