Reddit reviews HHIP 1/8~5/8 INCH JT3 Drill Chuck with Key (3700-0105)
We found 1 Reddit comments about HHIP 1/8~5/8 INCH JT3 Drill Chuck with Key (3700-0105). Here are the top ones, ranked by their Reddit score.
Capacity 1/8"-5/8" | Taper Mount JT3Supplied with chuck key.Accuracy and strong gripping force.For portable, bench or floor type drill press.
Ow that's awesome!
Happy birthday already!
Great to hear that the RAM will be used! That really makes me happy.
I've seen your updated OP and my god, I get way too jealous, haha! This is going to be an amazing PC.
---
Watercooling
---
I have been looking at it in depth. You don't want to go with the 480mm in the top & 240mm in the bottom setup?
Here is a double 480mm build. Which does look pretty awesome as well.
Here is an other double 480mm build. This one is a bit messy, but just to show you how it will "look".
I would advise to buy the pretty expensive but probably very good & awesome looking window from MNPC tech.
I've send them a mail to question if a 480mm radiator will still fit in the bottom. I am very sure, but not entirely.Just got a reply from MNPC tech and the 480mm radiator will fit no problem.
---
As for the tubing, you mentioned that you want hard tubes. Would you perhaps like the extra step to go with glass?
The benefit of glass is that it's very scratch resistant & it stays very clear. It's also not that hard to "cut" but you need to take your time for it. It will take a full weekend for sure to completely watercool it. Or I would say, 2 days at least.
Here is a video that explains on how to cut glass tubes. But it also shows you and explains why you would perhaps want glass tubes.
As you can see at 3:23 the soft tubing got pretty damn clouded. I don't know how long this took, but I guess about a year+ for sure. Probably 2 years, not entirely sure.
When you do go for glass, it's recommended to actually set up the whole loop in plastic first. To get the exact lengths, since you can cut plastic a lot easier than glass. Then you can use the plastic parts as templates for the glass. This will cost you an other $50 extra, but it's mostly going to cost you time.
I will put the plastic in the list.
It's actually great that you'll get the case soon, because then you can measure up a lot of things that I need to know. So I can suggest the right parts! So be ready with a measuring tape.
---
GTX1080s, cables & monitors
---
GTX1080s:
Yes, getting 2 GTX1080s is going to be "rough". They sell out in a snap, so I highly recommend to make an account at this website:
https://www.nowinstock.net/computers/videocards/nvidia/gtx1080
Then you can get an email / SMS text notification for when parts come back in stock, so that you can order it very quickly. It sells out in less than 2 hours the last time a card came into the store on Amazon.
You can buy any "founders edition" card from any brand really. But EVGA & Asus are 2 that keep the warranty even when you put waterblocks on them. So I prefer those 2 brands, maybe MSI, Gigabyte, Zotac & other brands started to also keep the warranty if you put their cards under water. But I am not sure about that.
I highly recommend to be very careful about all the screws when you put on the waterblock. Just in case you have to send the card back for RMA. You need to have all the screws & the cooler.
Cables:
You have to tell me which color combination you would prefer. They have a lot of options from CableMods.
Then I have a better idea on how to pick out the colors for the rest of the components.
Monitors:
Ow yes, the monitors! I assume that you probably would prefer to have the same monitors all around? That would of course shoot your budget into the roof. If you do go for the Acer 1440p, 165Hz gaming monitor of $759. The LG 4K monitor that I recommended got a very sleek design as well, but it of course is a bit different compared to the Acer 1440p monitor.
Other parts:
I hope that you didn't buy that CPU for $549.99? But anyway, you want to buy a cheap after-market air cooler as well. Since the i7-6700K does not come with a cooler on it's own.
You need this to test the system, before you put it under water, you have to make sure it works on air. Including a stress test for about 2-12 hours. Whatever you prefer. I generally let it stress test for 1 night. Which is about 8-10 hours.
I will post my list with all the parts later tonight. I hope, but I have to tell you, that you should not order it right away. We have to do some measurements first!
Measurements:
I will make a paint drawing to show you exactly what I need to know in terms of all the measurements.
Tools:
I've also looked at some tools that you need to build the PC and to watercool it. But I have to ask you if you have certain tools already.
There may be some other products I am forgetting about right now. Excuse me if I do!
Item|Price
:----|:----
Magnetic screwdriver set | $20
Set of files | $15
Handsaw | $13
Electronic drill | $50
1/8" to 5/8" adapter chunk | $20
Velcro straps | $8
Anti static wrist strap | $5
Working on the whole list now (again).
---
Again, if you have any questions. Feel free to ask!