Reddit reviews Hosa STX-110M 1/4" TRS to XLR3M Balanced Interconnect Cable, 10 Feet
We found 12 Reddit comments about Hosa STX-110M 1/4" TRS to XLR3M Balanced Interconnect Cable, 10 Feet. Here are the top ones, ranked by their Reddit score.
This cable is designed to connect gear with balanced phone outputs to gear with XLR inputs. It is ideal for use in a variety of pro audio applicationsNickel-plated plugs for rugged durability and efficient signal transferOxygen-Free Copper (OFC) conductors for enhanced signal clarityOFC spiral shield for effective EMI and RFI rejection and flexibilityConnector(s): 1/4 in TRS to XLR. Length: 10'
What you want is called a crossover.
Here is an example of an inexpensive (<$100) device that will do what you want. Note though that this only has XLR in/out so you will need cables to go from your 1/4" TRS to XLR. Here is such a cable (you will need 2 of course).
If you can afford it, I like DBX's equipment better than Behringer when it comes to this sort of gear. Here is DBX's current equivalent. This one is 1/4" only but a XLR version is also available. I highly recommend moving to all XLR wherever possible in your system as it is the standard for pro audio signal cabling, and you can daisy-chain cables to make them longer.
Let me know if you have any other questions!
You have the potential for noise. I've used it in a pinch, but long term, not so much.
Have you thought about getting a small mixer to handle the signal and the levels? Using a mixer would let you control the level of your sub separately. Depending on your budget, you can easily make something work.
Cables for mixer to JBL: https://www.amazon.com/Hosa-STX-110M-XLR3M-Balanced-Interconnect/dp/B000068NYY/ref=sr_1_3?s=musical-instruments&amp;ie=UTF8&amp;qid=1502931800&amp;sr=1-3&amp;keywords=trs+to+xlr
"FX" output to sub: https://www.amazon.com/Hosa-TRS-202-inch-Insert-Cable/dp/B000068O1K/ref=sr_1_3?s=musical-instruments&amp;ie=UTF8&amp;qid=1502931836&amp;sr=1-3&amp;keywords=trs+to+rca
Yep! I do this with my 2i4. I soldered together a couple of 1' 1/4" TRS to XLR cables. They also can be purchased. You'll want something like this
You want balanced cables, not unbalanced ones.
The R8 has 1/4in Balanced Outputs, so get TWO (use both for L+R Mono and then you have the right cables for two speakers) of these unless you already have 1/4in TRS to 1/4" TRS cables.
I would recommend staying away from audioengine, there are better options for the price.
$120 - Micca PB42x: These will sounds better than the Audioengine A2+R, but the build quality is not the greatest. These are 'the baseline' for cheap speakers that sound decent.
$200 - PreSonus Eris 4.5: These will provide more bass and sound better overall than the Audioengine A2+R. Build quality is very good on these as well.
$283 - JBL LSR305 + $120 - Scarlett 2i2 + $16 - 2x(XLR to TRS cable): This setup is amazing for the cost. I have been using the JBL LSR305 for quite a while now and they never disappoint. I've heard better, but those speakers are way more expensive. These can be connected directly to your computer through a 2xTRS to 1/8" cable, but I don't recommend it. When I tried that the speakers produced a terrible hissing noise. I recommend the Scarlett 2i2 over other audio interfaces due to its reliability, balanced speaker outs, and great mic pre-amps if you ever decide to get a XLR mic down the road. The cables are needed to connect the speakers to the interface.
You can buy an adapter. https://www.amazon.com/Hosa-STX-110M-XLR3M-Balanced-Interconnect/dp/B000068NYY/ref=sr_1_3?s=electronics&amp;ie=UTF8&amp;qid=1506291779&amp;sr=1-3&amp;keywords=1%2F4%22+to+xlr
Do you mean the soundcard built into the Mac? No, you would need a 3/5mm jack if you want to plug directly into the laptop. Do not do this. Laptop soundcards are mostly awful and an audio interface is required to process sound from your DAW, otherwise you will experience audio crackling/lagging/etc. You're going to have to spend a little money on this, there really are no substitutions for a good soundcard / audio interface. This one is cheap and reliable, a different model than my exact one, but this is a good brand and you really can't go much cheaper than this without a major drop in quality.
Merged from my above post, so you have it all in one place:
Yes the XLR connector should be 3 prong male.
This is WRONG, do NOT buy
This is CORRECT, DO buy
On the back of my Yamaha HS8 monitors, there are female 3-prong connections, I plug the male 3-prong end of my cable into it, that is called an XLR connector. I then plug the other end of the cable, a 1/4 TRS shielded connector, into the back of my Presonus Audiobox iOne. Make sure that it is 1/4 TRS and not a 3.5mm audio jack, as that will be too small to fit into the audio interface.
These cables look fine. They're cheap, have good reviews, and are balanced/shielded cables which means you shouldn't have interference issues from other electronic devices.
Conclusively, you need these items, but if you find a cheaper audio interface with two TRS ports, go for it, as long as reviews show it's reliable. You also need two 1/4 TRS to XLR Male cables, balanced. Items:
The link you gave is not working anymore. Would these work?
Return those adapters and get other ones if you can. My adapters have like 3 ft of cable between the 1/4" and the XLR head.
Something like this:
Hosa Cable STX110M 1/4 TRS to XLR Male Cable - 10 Foot https://www.amazon.com/dp/B000068NYY/ref=cm_sw_r_awd_4Kiqub0AZYKQY
The amp could be directly connected, it has xlr inputs, so your local audio store will have the right cables, you will need speakons for the output side going to your speakers. Amazon also has the cables you could use.
Two of the following from the dj t1 to the amp
Hosa Cable STX110M 1/4 TRS to XLR Male Cable - 10 Foot https://www.amazon.com/dp/B000068NYY/ref=cm_sw_r_other_awd_rhk2wb628ER09
Here's exactly what you'd need to convert:
Hosa STX-110M 1/4 inch TRS to XLR3M Balanced Interconnect Cable, 10 feet https://www.amazon.com/dp/B000068NYY/ref=cm_sw_r_cp_api_x6oHAb5J0CPWH