Reddit reviews Introduction to Networks v6 Companion Guide
We found 3 Reddit comments about Introduction to Networks v6 Companion Guide. Here are the top ones, ranked by their Reddit score.
here is my 2c
it is crucial that you understand subnet masking as it's like 70% of ipv4 networking and unfortunately the first thing you need to wrap your brain around as you will be working with VLSM in most networking labs/scenarios. download this pdf and just start plugging along..
Sormcontrol.net is a nice online tool to help with learning subnets.
once you finish that workbook and feel comfortable with variable length subnets, start working on these problems in your spare time and at your own pace. your goal should be to solve any single subnetting problem within 30 seconds.
now that you understand a bit of subnetting, you need to begin learning the OSI-model, focus mainly on the layers 1 (sending bits across a medium), 2 (mac address switching) ,3 (ip routing), and 4 (tcp, udp, and icmp ports). here are two of my favorite beginners books to networking.
Microsoft Windows Networking Essentials, &
Cisco Introduction to Networks V6
Once you've read those books you should be ready to learn routing and switching. Focus your attention here to static routing, dhcp, nat, basic ACLs, and to understanding switchports and vlan related things like trunking and routing on a stick.
Next book you want to read is going to be on dynamic routing and scaling networks for large environments.This is where you delve into dynamic routing protocols (RIP, EIGRP, OSPF) and redundancy/failover protocols such as spanning-tree, etherchannel, and HSRP.
This is a nice book to read along the way and to sort of tie all of the knowledge you've learned so far together into short succinct chapters.
Download GNS3 or Packet Tracer if you want to simulate networks and labs at your desktop. You can learn a lot about the concepts and protocols presented in the books by searching on youtube things like "GNS3 dhcp" or "Packet Tracer dhcp".
I don't know about CBT nuggets, but just focus on what I've linked you and if you are going to follow anything online, the topic of routing and switching is the way to go as it is fundamental. Study like you are trying to pass the CCENT exam and then study for the CCNA exam.
Hmm I would suggest Introduction to Networks v6 Companion Guide or ICND1.
I learned at school but Cisco is the reference for networks, and getting CCNA is like having the common basis that every IT Network guy should know. Well, not exactly having the CCNA as a cert but knowing all the stuff they talk about.
Be careful though, ICND1+ICND2 = CCNA, so the 2^nd book isn't enough.
If by chance you know French, try this one. He is the reference for any beginner as he explains the concepts. Unfortunately I found no translation of it, only for his most recent books (which are more specific). And this website.
Good luck
Also if you buy the OCG (Official Cert Guide), there are companion books that you can get also, the companion guides reference workbooks. The workbooks have labs and such written out that you can do in Packet Tracer / GNS3 / VIRL / Physical.
Here are Amazon links to all of the official Cisco books for CCENT (ICND-1):