Reddit reviews IOGEAR 2-Port USB VGA Cable KVM Switch with Cables and Remote, GCS22U
We found 18 Reddit comments about IOGEAR 2-Port USB VGA Cable KVM Switch with Cables and Remote, GCS22U. Here are the top ones, ranked by their Reddit score.
One USB keyboard, USB mouse, and VGA monitor control two computers ; Separate the Internet and Intranet with the click of a buttonMax resolution: 2048 x 1536, DDC2B ; Plug-n-Play monitor supportMolded-in cables to simplify setup ; Compact design features two attached KVM (USB and VGA) cablesCompact design features two attached KVM (USB and VGA) cablesCompatible with PC, MAC and SUN operating platformsBacked by IOGEAR’s 3-year and FREE lifetime technical supportWork from Home Solution2-Port USB Cable KVM allows users to share a VGA monitor, a USB mouse, and a USB keyboard between two computersSupports Windows 2000 or higher, Mac OS 9.0 or higher, Sun Solaris 9 or higherentry level KVM that will allow them to multitask with two computers at their disposalcomputer selection via 6 ft remote controller cable that can be placed on your desk for easy reach, full Mac keyboard support , supports programmable miceno power adapter required
NSFW :)
bring a thin laptop to work and hide it behind your work computer and use a switch to switch to your laptop using this switch. I was learning to code on my thin laptop
​
https://www.amazon.com/IOGEAR-2-Port-Switch-Cables-GCS22U/dp/B001D1UTC4/ref=sr_1_15?keywords=switch+monitor&qid=1566802175&s=gateway&sr=8-15
to get sound, depends on what speakers you are using.
You know if you hit the share button, you can copy the short link?
https://amzn.com/B001D1UTC4
https://amzn.com/B00006HSM2
https://amzn.com/B003M0NURK
(ok, I'll shut up now)
I hope that's not the way you actually use it. The ergonomics look terrible.
I'd get a KVM switch and get rid of one of the monitors. Then prop the optiplex on its side and possibly put it on the floor if there is space in the foot area or the gap between the table and wall.
The laptop could even go on that bottom wire shelf.
That way you have a mostly clear working space and can adjust the main monitor so you aren't looking down when you're working. That's assuming you're OK with using just one monitor for your work.
I was looking at it for the KVM use as well as most KVM switches are a bit more expensive. This one seems to have decent reviews and isnt insanely expensive https://www.amazon.com/IOGEAR-2-Port-Switch-Cables-GCS22U/dp/B001D1UTC4/ref=sr_1_3?s=pc&ie=UTF8&qid=1482864076&sr=1-3&keywords=kvm+switch
https://www.amazon.com/IOGEAR-2-Port-Switch-Cables-GCS22U/dp/B001D1UTC4/ref=sr_1_3?ie=UTF8&qid=1494887205&sr=8-3&keywords=kvm
Yep. I use this one because it was the cheapest at the time. I just use the USB input/output and the switch button and leave the VGA cable hanging behind the pcs.
The one above works fine, but I'd probably buy this one since it has more usb ports and doesn't have the unnecessary VGA cables. (Check to make sure everything you need is included. Looks like that might be missing a power source).
If it's just the keyboard there are a lot of AB switches out there for that, example: Plugable USB 2.0 Switch for One-Button Swapping of USB Device/Hub Between Two Computers (A/B switch)
If you want to share the keyboard, mouse, and monitor then you are looking for a KVM switch: IOGEAR 2-Port USB KVM Switch with Cables and Remote, GCS22U
{no endorsement of products or sellers implied}
Yes, USB switching needs an active switch, USB 3 even more so. I'm not sure that switching the high speed USB 3 is even possible.
My thoughts about the KVM switch is to use just the USB part and just not connect the monitor part. Just something heap like this cheap KVM
If you really need USB 3, the high speed part, then you are out of luck. If you just want to switch mouse and keyboard and the occasional USB-stick, then this will work.
Any KVM switch recommendations?
Personally thinking this one since it has a remote.
Just for additional clarity this is what a KVM is ...
https://www.amazon.com/dp/B001D1UTC4/ref=cm_sw_r_cp_api_z7FCzb9W5KXCD
I use one of these and it works fine for me. I switch between my W7 and Debian boxes with it.
A peripheral sharing switch is different than a KVM. It's usually a lower-cost device designed to share things like printers and scanners - which are more sensitive to external hubs but less sensitive to disconnects/reconnects.
If you're never going to connect the monitor for switching it doesn't matter what display connection you have - so you can go as cheap as [this](https://www.amazon.ca/IOGEAR-2-Port-Switch-Cables-GCS22U/dp/B001D1UTC4/0 which is similar form factor to your current device. It only has VGA but does have integrated cables.
If you might like to have the extra display for your laptop you can choose something with compatible video - like this DisplayPort model which is significantly more expensive but gives you much more flexibility.
What you're looking for is a KVM switch, which lets you switch a keyboard, mouse, and monitor between more than one computer at the touch of a button. If you're looking to do just the keyboard and mouse, this is all you need. If you want the switch to share a monitor as well, you'll have to stick with VGA unless you're willing to shell out a ton of cash.
What is a virt and why do I need it?
What is an 'old school VGA slot'?
Also all my drivers are fine they have to be or the tablet stops working.
Do you mean this? Should I buy this to make it work? https://www.amazon.com/IOGEAR-2-Port-Switch-Cables-GCS22U/dp/B001D1UTC4
Would that make me be able to work on my tablet's screen and then look up and see a second image on the tv? Is that how that works?
Are these two devices in close proximity when you're intending to use them? Why not just use a KVM? Your devices can connect to whatever network you like, only keyboard/mouse/video are shared, and usually toggled via a physical button. You could leave out the video cable and just switch the mouse/keyboard.
If you DO want to use the video, there are options available for most standards, such as VGA, DVI, HDMI. I've not seen one with multiple video cable types on the same switch, but I'm certain some god-awful expensive option is available.
https://www.amazon.com/IOGEAR-2-Port-Switch-Cables-GCS22U/dp/B001D1UTC4/ref=sr_1_1?s=pc&ie=UTF8&qid=1465833952&sr=1-1&keywords=kvm&refinements=p_n_feature_keywords_two_browse-bin%3A5060496011
+
https://www.amazon.com/C2G-Cables-26957-Female-Adapter/dp/B00006HSM2/ref=sr_1_7?s=pc&ie=UTF8&qid=1465834108&sr=1-7&keywords=dvi+to+vga
+
https://www.amazon.com/AmazonBasics-4-Port-USB-2-0-Ultra-Mini/dp/B003M0NURK/ref=sr_1_1?s=pc&ie=UTF8&qid=1465834146&sr=1-1&keywords=usb+hum
=KVM switch with 5 switched USB ports by pressing 1 button that works with DVI monitor output.
The best arduino solution I can come up with will require you to wire up like 30 fets, and will probably not be more elegant than a commercial solution.
Hey, man. I found an example of the sort of equipment, at the end user level, required (and typically used) to bridge that "AIR GAP!!" between classed and unclassed content.
It's pretty technical, but it's called a "KVM switch."
https://www.amazon.com/IOGEAR-2-Port-Switch-Cables-GCS22U/dp/B001D1UTC4