Reddit Reddit reviews IRWIN Screw Extractor/ Drill Bit Set, 10-Piece (11119)

We found 16 Reddit comments about IRWIN Screw Extractor/ Drill Bit Set, 10-Piece (11119). Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Power Tool Parts & Accessories
Drill Bits
Power Drill Parts & Accessories
Masonry Drill Bits
Power & Hand Tools
Masonry Drill Bit Sets
IRWIN Screw Extractor/ Drill Bit Set, 10-Piece (11119)
Designed to remove broken studs, bolts, socket screws, and fittingsAggressive left hand spiral design for extra gripping powerEasy out style spiral flutes embed themselves to increase grip as resistance increasesExtractor size and recommended drill bit size are etched on each toolSet includes spiral flute screw extractors sizes EX-1, EX-2, EX-3, EX-4, EX-5; drill bit sizes 5/64", 7/64", 5/32", 1/4", 19/64", and a metal index case
Check price on Amazon

16 Reddit comments about IRWIN Screw Extractor/ Drill Bit Set, 10-Piece (11119):

u/NO_TOUCHING__lol · 6 pointsr/Justrolledintotheshop

Get the tools in the picture. They're great, and relatively cheap.

u/kramithefrog · 6 pointsr/GoRVing

Just go but an easy out set.
IRWIN Screw Extractor/ Drill Bit Set, 10-Piece (11119) https://www.amazon.com/dp/B0002NYBH8/ref=cm_sw_r_cp_api_i_GK.BDb32A3JAT

This might be a better set.

8 piece Screw Extractor Set,Damaged Screw Broken Bolt Water Pipe Remover Set By Nizzco https://www.amazon.com/dp/B075TY8Y87/ref=cm_sw_r_cp_api_i_m0.BDbDKJD770

u/infamousnj69 · 5 pointsr/bikewrench

Yeah that hole doesn't look too good TBH. Hopefully it didn't damage the threads. The smallest one in the kit I showed you has a minimum of 2.5mm but it should still work on the 2mm screw. You can also find a spare 2mm allen key you don't need and use the strongest Gorilla glue you can find and glue it onto the screw. Slowly try to unscrew it after an hour or so. Take it to your LBS and see if they can help. There's also this which goes as low as M3

Edit. Just looked at the other angle pic you posted. Screw extractor most likely won't work. Try the allen key method.

u/bobroberts7441 · 3 pointsr/fixit

You drill into it with a reverse (left handed) drillbit, running your drill in reverse. That will probably bring the bolt out, but if it doesn't you use an Easy Out screw extractor to screw it out. Here is a kit with both left handed bits and extractors. You can get individual tools at a local hardware store. Soak it well wit PB Blaster first.

u/seek_0 · 2 pointsr/Jeep

Assuming the head is stripped (rounded) and it's not the threads, I'd use this style of broken bold extractor. That is assuming you can fit it on.

If you've got nothing at all to work with, then you can use a spiral-flute type broken bolt extractor

These are basically like big reverse-threaded screws that screw in counterclockwise (so lefty-tighty, unlike normal bolts/screws) that let you put enough torque on the bolt to remove. No sawing is necessary, you just have to drill a hole into the stripped bolt more or less on center.

If it's the nut on the hinge pin, I'd just use a small drill bit and drill several holes vertically and then crack it with a chisel (protect the door when you do this.)

Practically everyone carries door hinge pins and mounting hardware. Jeep dealers will have them, as will the major online parts places (4WD, quadratec, etc.)

u/fr0mastaj · 2 pointsr/Cartalk

Got a picture? Maybe a left hand drill bit along with a screw extractor bit, if you have room?

Something like this: http://www.amazon.com/Irwin-Industrial-11119-Extractors-10-Piece/dp/B0002NYBH8 (but they do make better ones out there too)

u/vader540is · 2 pointsr/hometheater

You could use something like this kit, i have one and it very useful. Just make sure you measure your binding post size and cross check to see if this kit comes with the size you need.

IRWIN Tools Hanson Spiral Extractor and Drill Bit Set, 10 Piece, 11119 https://www.amazon.com/dp/B0002NYBH8/ref=cm_sw_r_cp_apa_CPgQBb1RK76C6

u/SicilSlovak · 2 pointsr/projectcar

This is what you're looking for, screw extractors. Cut the head flat, center punch, drill out, then use the left handed extractor bit to remove the bolt

I did this to a valve cover bolt or two, over tightening them to avoid leaks. It sucks, but it happens. These solve the problem.

Note: some WD-40/penetrating oil and heat can make the process go easier, as mentioned elsewhere in this thread.

u/M80IW · 1 pointr/HomeImprovement

I like this set, all the extractors come with a matching left handed drill bit.
http://www.amazon.com/gp/product/B0002NYBH8/

u/another_cube · 1 pointr/Miata

I've had success extracting a broken bolt with this kit: https://www.amazon.com/gp/product/B0002NYBH8/

I'm sure any similar product will work.

u/smittyjones · 1 pointr/mechanics

I have these Irwin left handed bit/extractor set. I generally end up using them for all kinds of holes, even when it's not a bolt or I'm not trying to extract it, they just seem to cut really well, especially at the price point. I think lowes or home depot carries them too.

u/wolf9545 · 1 pointr/Tools

I own this set, http://www.irwin.com/tools/screw-bolt-extractors/10-pc-spiral-extractor-drill-bit-set-in-metal-index / https://www.amazon.com/Irwin-HANSON-Spiral-Extractor-11119/dp/B0002NYBH8/ref=sr_1_3?ie=UTF8&qid=1521322834&sr=8-3&keywords=irwin+screw+extractor+set&dpID=410DHljAW2L&preST=_SY300_QL70_&dpSrc=srch

and have used it once or twice. What I like about this one is the left handed drill bits. When you use the drill bit to round out the screw head, the left handed drill bits might just grab the screw and unscrew it for you.

u/Shtrever · 1 pointr/MechanicAdvice

https://www.amazon.com/dp/B0002NYBH8/ref=cm_sw_r_cp_apa_i_eCy4Cb467MDW6

I like these kinds of kits, I have one like this (not sure which brand). Those reverse drill bits sometimes work better than the extractors.

u/DsrtRunner · 1 pointr/videography

Get a screw extractor set from Amazon. Just make sure to get one that comes with left hand drill bits. You can often get the screw out just with the left hand bits before even needing to use the extractor.

This is a good kit if you want a variety of sizes for anything like this in the future:
https://www.amazon.com/dp/B0002NYBH8/

u/dbinkerd · 1 pointr/ar15

Something like this might help. I know how small that roll pin must be, but I am not certain one of these tools will be small enough for the job. Might be worth it, though. Otherwise, a trip to a professional gunsmith might be in order. Good luck!