Reddit Reddit reviews J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Black - 25 ml

We found 4 Reddit comments about J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Black - 25 ml. Here are the top ones, ranked by their Reddit score.

Automotive
Oils & Fluids
Body Repair & Restoration Chemicals
Body Repair & Restoration Adhesives
J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Black - 25 ml
J-B WELD PLASTICBONDER (Black): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more J-B Weld PlasticBonder now comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple usesCURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure J-B Weld PlasticBonder set and cure color is blackSTRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSISURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and AluminumDO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond
Check price on Amazon

4 Reddit comments about J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Black - 25 ml:

u/Magnetar12358 · 7 pointsr/buildapcsales

If the hinge is unglued, it's fixable with J-B Weld Plastic Bonder. If the screen is undamaged, it can be glued or mounted back. If it is damaged, laptop screen replacements aren't too expensive.

I had to repair an Acer Nitro 5 laptop using J-B Weld. The laptop was closed and was accidentally knocked off a table. The hinge cracked and separated from the screen and ripped out a screw holding the screen. Luckily the screen was fine. After using J-B Weld it was stronger than the surrounding plastic. The key is to let it cure for at least 24 hours. Clean the surfaces, removing any oils. Clamp everything together to ensure good bonding.

u/Pleased_to_meet_u · 3 pointsr/HondaCB

You're in luck. I've broken those pegs off before, too. The fix is easy, but it's going to cost. It's going to cost you all of about eight bucks.

This is for the broken peg. Clean the area of the peg and the sidecover. Scuff the hell out of it with high-grit sandpaper. If you don't have any, cut it up in a cross hatch pattern with a sharp knife. Don't cut all the way through (!) but you want the surface really scuffed up so the epoxy can get in all the little crevaces and hold everything together.

Once it's cleaned, clean it with brake cleaner or acetone or something that makes sure to get any oils out. (Or skip this step. I have before. If you're unlucky and you skip it, you'll have problems.)

Put epoxy on both surfaces, push the peg into exactly the right place then goop a ton on at the seams and up the sides of the peg. You want enough so that it changes the slope going up a bit - don't be stingy.

I don't have experience with the emblem, but I can't imagine it's much different.

I haven't used that exact product that I linked, but any plastic-specific two part epoxy should do the trick. Not any two-part epoxy, but any that's specifically for plastic.

Good luck! When you finally finish the repair, reply to this comment and let me know how it went. It's going to be fine!