Reddit reviews Kangaroos Professional Grade Liquid Latex Makeup, 16 Oz Pint

Credit for the awesome fake glove idea goes to the guy who posted the Severed Hand Costume a year ago, not sure who, I saw the repost from a few days ago. His costume was a guy holding his own severed hand, and the top comment was “You were born with two right arms!!!” People were discussing how to solve that when I thought of this costume idea. You’re not holding your own hand, but a zombie hand. It just seemed like too cool of a project not to build, so I went ahead and tackled it right away.

Here is a little written guide on how you can tackle this yourself at home. Let me know if you have any questions.

Here’s what you will need-

•1 Black/red spandex glove

•~1 Pint Liquid mask latex

•2” thick styrofoam sheet, you only need about 4”x14”, plus a knife/rasp for carving.

•Acrylic paint- Black, Red, Brown, Green, yellow, fleshtone

•tin foil

•vinyl gloves

•rice/beans/airsoft BBs to fill glove for painting.

•sand for texture

•tissues

•Spray paint- black, brown

•gloves for fake hand

•jacket

First, take the long spandex glove and cut a 2”x1” hole in the wrist just below the palm that your real hand slips into. If you mess up, just turn the other glove inside out and use that one. Then carve the zombie forearm out of foam, keeping it really skinny and emphasizing the muscle shape. Then it goes into the back of the spandex glove up to where it touches your real wrist, with pins stuck into the foam to keep it in place and shape the fabric. Wrinkles are good here, you want a loose skin/vein look. Fill a vinyl glove with some rice/beans/air soft bbs and stuff that into the hand part of the glove temporarily while you paint it. Then use a liberal amount of liquid latex to paint it. Make sure you wear paint clothes or an apron when working with Latex. It’s messy stuff and will ruin your clothes/carpet. Put some tin foil down on your counter, and while painting the arm itself, mix latex into some tissues laid flat on the foil for skin muscle/skin texture pieces to add after they dried. You can mix normal acrylic/tempra paint into liquid latex to make different colors. Keep in mind it usually dries a lot darker than when it is wet, so don’t make the colors too dark. Start by painting the arm entirely black, then layer on red, green, and rotten flesh colored latex. Rub up and layer the tissue and latex pieces between colors to add texture to each layer. Sprinkle some sand on the wet latex to give it a really gnarly gross texture. Then carve a foam radius and ulna bone and stick them on the back with toothpicks and coat them with white glue to strengthen them/glue them to the arm. Layer more red latex on top to make them look like they go up into the arm. Then glue a dangly bit of latex as a snapped tendon. For detailing, flick some dark red acrylic paint on with an old toothbrush for some blood splatter in logical spots like the severed part of the arm and palm. Use a glossy latex-based spray for the exposed flesh parts to break up the flat texture latex usually has. You could also buy a bottle of GO2 brand glue and paint that on, it dries clear, glossy, and flexible in 20 mins. Optionally, cut a template for the tire tread mark and tape it around the zombie wrist in a logical spot, and just mist some black primer on top of that. Finally, mist some brown/black spray paint on to make it look dirty/burnt. Go light on it at first, you can always add more, it’s harder to subtract. Once everything is dry, untie/unclamp the vinyl glove filled with rice/beans/bbs and let those drain out through the hole in the wrist. This makes the glove shrink and wrinkle and also makes the vinyl glove easy to peel out of there.

Also optional, but you can add a $7 gold wrist watch from Walmart that you can grime/bloody up with latex (which should clean off fairly easily as long as it doesn’t soak in) Have that resting further down the zombie forearm.

Then the fake hand/glove around the wrist is just stuffed with some tin foil that you shape like the bone structure of your hand. Tin foil is good because you can bend and shape it. Then you shape the tin foil in the back of the hand so that it blends into your wrist. You can use two Velcro cable ties to keep it on your wrist, and put a safety pin through the Velcro, glove, and tin foil to keep them all together. Or you could just use a shoelace and tie it on. Make sure you put your jacket on BEFORE you put the zombie arm glove on. Then throw together a gross walking dead/ apocalypse look at a thrift store, add some cheap air soft guns and your melee weapon of choice, and you are done!

Here is a few pictures to give you a better look-

Painting the Zombie arm

zombie arm glove and tin foil hand

If you liked the video, I’d appreciate a x-post or share anywhere else folks might dig it! YouTube page I’d love to get it on the screens of anyone who might want to try it out in time for Halloween!

If you like this project and want to check out more of my work and tutorials like this, check out my YouTube page Here!

Try liquid latex? For large effects or attaching bald caps etc

Kangaroos Professional Grade Liquid Latex Makeup, 16 Oz Pint https://www.amazon.com/dp/B011X3C8CK/ref=cm_sw_r_cp_apa_i_OFM9Ab1V9ZARF

Or use spirit gum for smaller things that you need to REALLY stay on longer haha. You will need spirit gum remover as well (a separate product) to take it off safely.

Mehron Spirit Gum & Remover Combo https://www.amazon.com/dp/B0040ZEHPK/ref=cm_sw_r_cp_apa_i_VHM9Ab2HDKE3Y

There are a couple more options but these 2 products are very versatile and can probably accomplish your goals