Reddit reviews Kingston Digital 128GB SDXC Class 10 UHS-I 90R/45W Flash Card (SDA10/128GB)
We found 1 Reddit comments about Kingston Digital 128GB SDXC Class 10 UHS-I 90R/45W Flash Card (SDA10/128GB). Here are the top ones, ranked by their Reddit score.
Versatile - Class 10 performance when used in a non-UHS-I capable deviceCompliant - with the SD Card Association specificationSecure - built-in write-protect switch prevents accidental data lossCompatible - with SDHC & SDXC host devices; not compatible with standard SD-enabled devices/readers; SDXC cards are not compatible with SDHC-enabled devices/readersPerformance 300X - up to 90MB/s read and 45MB/s write (Speed may vary due to host and device configuration), ultra high-speed bus I (UHS-I)Guaranteed - lifetime warranty, free technical support
SD guide and links. (note I had to search for the model numbers on US eBay and or Newark.com)
https://www.youtube.com/watch?v=CKNL9PZM11o
I found these SD cards to work great with all my other system mods.
https://www.amazon.com/gp/product/B00K5CBBUG/ref=oh_aui_search_detailpage?ie=UTF8&th=1
SD Card Extension Cables, search on eBay tons of them out there.
3m Double Sided Tape. Found at most auto parts stores.
http://3mauto.com/products/tapes/3m-scotch-mount-molding-tape-03616.html
Use a nice strong set of wire cutters to nip off a gap in the tray, I used a dermel tool to grind down the rough edges. Use the wire cutters to trim out the plastic spot. Leave lots of extra tabs to grind clean with the dermal. Use a xacto knife to trim the cloth mesh. I use 3m Automotive double sided tape to hold down the Extension Slot. Layer it up 4 layers. Note in my pic I have the cable nice and tidy with a paper clip. I tried taping the loop with electrical tape. Those cables have no shielding and it caused lots of issues. Just slowly wad up the cable in the tray the looser it is the better.