Reddit Reddit reviews Klein Tools ET300 Circuit Breaker Finder / Receptacle Tester Finds Electrical Circuit Breaker of 120V Standard Electrical Outlet

We found 14 Reddit comments about Klein Tools ET300 Circuit Breaker Finder / Receptacle Tester Finds Electrical Circuit Breaker of 120V Standard Electrical Outlet. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Electrical Equipment
Electrical Testers
Circuit Testers
Klein Tools ET300 Circuit Breaker Finder / Receptacle Tester Finds Electrical Circuit Breaker of 120V Standard Electrical Outlet
This circuit breaker finder can find the corresponding circuit breaker of any 120V standard electrical outlet quickly, accurately, and automaticallyFlashing arrow indicator for easy identificationStrong transmitter reaches distances up to 1000-feet90 to 120V operationMicroprocessor controlled for more reliable identification
Check price on Amazon

14 Reddit comments about Klein Tools ET300 Circuit Breaker Finder / Receptacle Tester Finds Electrical Circuit Breaker of 120V Standard Electrical Outlet:

u/Freedomgoat · 83 pointsr/electricians

Do yourself a favor and buy a circuit breaker finder, the tool has paid for itself for the time it saved me.

https://www.amazon.com/Klein-Tools-ET300-Electrical-Standard/dp/B003LHJSY8/

Just for the love of god what is Kline's fascination with stupid push buttons that get activated in the back of the van so i gotta hear beeping from that and the five wireless testers i have lost in other bags?

u/dmanww · 25 pointsr/OSHA

Something like this

The plug generates a signal on the circuit that the finder looks for.

u/super_not_clever · 8 pointsr/HomeImprovement

I know in my case for my most recent house, I used a Circuit Breaker Finder. Have a helper plug it into an outlet, scan the panel til you find what you think it is. Flip the breaker, the power light at on the unit plugged in goes off to confirm, write it down, move on. That, with a light socket plug adatper got the majority of circuits out of the way. I was lucky that I had the finder at work, and can see how spending $40 can be a bit much for what most people see as a one time task.

For previous houses, I've had a few different methods. If I'm doing the entire house, I'd grab as many electric things as I could find and plug them in all over. Lamps, plug testers, radios, basically anything that would give me indication that the power was on or not. Then yes, sweep.

If I'm looking for a single breaker, I would just plug in a set of speakers, play some music and flip breakers until the music stops.

u/BillDaCatt · 4 pointsr/techsupportgore

I use one of these: Circuit Breaker Finder

The transmitter plugs into the outlet and transmits a radio signal through the wire. At the panel, the receiver is passed closely over each breaker. The receiver beeps when the correct breaker is located.

The other method is to plug in a lamp that you can see from the panel or a radio that you can hear, then turn off each breaker one at a time until the correct breaker is located.

u/drzorcon · 3 pointsr/howto

This is pretty creative solution to your problem. If you dont have an iPad around, you might be interested in investing in one of these: http://amzn.com/B003LHJSY8

u/drtonmeister · 3 pointsr/HomeImprovement

In the USA the 1959 NEC introduced a rule that hasn't changed much to today; the “6 and 12 rule”:

210-22

>“receptacle outlets shall be installed so that no point along the floor line in any usable wall space is more than six feet, measured horizontally , from an outlet in that space.”

Communities/States sometimes make the most current NEC the local code right away, but it is not unusual for places to lag one or more code cycles behind. So it is quite possible that a mid 1960s house would have much larger distance along a wall between outlets, because they only needed to conform to the "20 foot rule" introduced in 1940 or the 1956 "12 foot rule".

Or, if there are outlets near enough to the corner on both adjacent walls, it could have been be compliant without an outlet on the 10' long wall.

Also, in some rural areas there may not have been code enforcement at the time that the home was built or added-on to, so the home was built to whatever standard the builder was accustomed to follow.

When outlets are put in at the time of build, they tend to be at consistent height. So if you have suspicion that there might be an outlet-box with the outlet removed hiding under the wallpaper, you can rub fingers along the wall at outlet height in order to feel any hollow or concealed cover behind the paper. You can also use a sensitive non-contact tester if you have one, to attempt to detect active wires behind the paper. Or use a stud-finder that has current detection. Or use a tone&probe "breaker finder".

u/WyTheGuy · 3 pointsr/electricians

I don't know what kind of work you do, I do everything, and once in awhile these save the day. They aren't tools I use often but they make life easier sometimes

Screw Extractor set

Knipex Plier Wrench

Klein tube cutter

Deep sockets in small case with an Impact Adaptor

Klein cct finder

u/Methelsandriel · 3 pointsr/electricians

Why not just get something like this? Walking back and forth or having someone help you seems like it would be a better idea than drop lights all over the place.

u/rabdas · 3 pointsr/HomeImprovement

Instead of radio or lamp, buy a circuit finder. It’s about $30 but you’ll never have to waste time turning every circuit on and off for every outlet. A circuit finder comes in two pieces - a wand and an outlet plug. Insert the outlet plug in the socket you want to turn off. Take the wand and scan the circuit panel to calibrate it. Scan again and the wand will beep when you are directly over the circuit. It’s makes life super easy. It’s sort of a one time use if you map your entire house in one sitting, but if you ever need to do electrical work anywhere, you don’t have to fumble with every circuit breaker

Klein Tools ET300 Digital Circuit Breaker Finder https://www.amazon.com/dp/B003LHJSY8/ref=cm_sw_r_cp_api_OnXEAbZ6KFJ7X

It’s

u/Junkmans1 · 2 pointsr/HomeImprovement

I've thought about picking up a circuit breaker finder, like this one to help identify all my circuits. If I were starting over and moving to a new house that didn't have all the breakers labeled I'd definitely do it. Much easier than the idea of testing each one with a lamp and two people yelling (or phoning) back and forth.

u/notWell69 · 2 pointsr/techsupportgore
u/0110010001100010 · 1 pointr/HomeImprovement

Something like this: https://smile.amazon.com/Klein-Tools-ET300-Electrical-Standard/dp/B003LHJSY8/

You plug the little part into a socket then take the wand to the breaker box. It transmits a signal across the power lines that the wand picks up. You dial the sensitivity up and down until you have only one breaker that it beeps over and boom that's the one! Very handy if you do your own electrical work.

u/ttreit · 1 pointr/livesound

My first thought is to get actual information on what outlets are on what circuits. That way you have a starting point for figuring out your best options.

This is pretty easy to do you just need access to the breaker panel and a circuit finder. Something like this.

As long as your doing it label each outlet you test (label tape, sharpie, whatever) with it's circuit number.

Even if you can only test the open circuits on/near the stage you'll have a base of information to start from.