Reddit Reddit reviews KnuKonceptz Kolossus 4 Gauge OFC Amplifier Installation Kit

We found 36 Reddit comments about KnuKonceptz Kolossus 4 Gauge OFC Amplifier Installation Kit. Here are the top ones, ranked by their Reddit score.

Electronics
Car Electronics Accessories
Car Audio & Video Installation Products
Car Amplifier Installation Products
Car Amplifier Wiring Kits
Car & Vehicle Electronics
KnuKonceptz Kolossus 4 Gauge OFC Amplifier Installation Kit
Over sized Tinned Oxygen Free Copper Power Cable20' 12 Gauge Kord OFC Speaker wire17' OFC RCA Coaxial Shieled RCA CableMini-ANL Fuse holder with 120A fuse
Check price on Amazon

36 Reddit comments about KnuKonceptz Kolossus 4 Gauge OFC Amplifier Installation Kit:

u/firebirdude · 6 pointsr/CarAV

You're not going to be able to keep the cassette player. I'm sorry to break it to you, but for the same reasons you can't buy an 8-track player, you can no longer buy a cassette player. As pdb1795 said, you can always get a new stereo with CD/AUX, then use a walkman plugged into the AUX to play your tapes. But I suggest converting all your tapes to MP3 ASAP so they'll stop losing sound quality everytime you play them. Plus you'll be able to play those MP3s without a walkman on your new stereo.

New stereo (all harnesses and brackets included for free)

Amplifier

Wiring

Front Speakers



Subwoofer depends on how much bass you want and how much trunk space you're willing to sacrifice. It also sounds like you're getting it all installed professionally, which is a smart idea. So figure at least $250 for labor, likely more like $300.

u/out18law18 · 5 pointsr/CarAV

Here ya go....Sundown E series 15 $165

Pioneer amp $170

box $150

wiring kit $ 60

Around $550 for everything, but you could easily knock off $100 of that just by building your own box. or still save some by finding someone on craigslist that builds boxes(every craigslist has 1 or 2)

u/Tec_ · 4 pointsr/CarAV

Gonna be a tight stretch at that price point. If you could shake loose another $100 you could get into one of the subreddits most recommend set ups.

Sub

Amp

Power wire

Then you just need a sheet of MDF for a box and any other install accessories you may need.

u/lpbman · 4 pointsr/CarAV

$140 subs

$95 Box

$115 amp

$60 amp kit

You didn't give a budget, so I went with something middle of the road, high value setup. Walmart is an authorized retailer of Pioneer, so you get a warranty. Cranked up, it will drown out your stock speakers... but you can turn it down to suit your situation.


If you are looking for something that will blend in with a stock system and have no plans on upgrading everything else.... swap the subs, amp, and wire kit out like so.

u/Chris260999 · 3 pointsr/CarAV

amp | wiring | woofer

This sub is arguably SQ oriented. You will need to fab a box. I've installed these a couple of times, they deliver. This is the lowest I would go.

u/ckeeler11 · 3 pointsr/CarAV

They are pretty much identical with the P having slightly more power (which will be inaudible). The I is more compact so if room is not an issue then the P would be fine. I would also invest in a better amp kit. Knukonceptz makes a solid kit.

Also I would not buy the amp from Amazon unless you know the seller is an authorized retailer. Otherwise no warranty.

u/cjk813 · 3 pointsr/CarAV

This is what I'd do on that budget.

Sub: Dayton Titanic 12 $190

Box $57

Amp $166

Wiring Kit $50

Total: $463

With the little extra remaining I'd get a sound deadening kit for your trunk. You could also save money on the wiring if you never plan to upgrade in the future, but I typically like to go overkill on my amp and wiring the first time so future upgrades are a simple plug and play without having to run new wiring.

u/UnsexySex · 3 pointsr/AskMen

I have an old Alpine MRP-M350 in my car. Paired with SWS-12D4.

First you have to pick your amp. But it also helps to know how many Amps your Alternator puts out. My alt puts out 150 amps, which is uncommonly high for a sedan. The reason for knowing your alternator is because if you have a weak alt, you will get headlight dimming very easily. No one likes headlight dimming.

After you know how many amps you have to work with off your alt. Then you get an amp. Something like this is pretty middle of the road:

http://www.bestbuy.com/site/alpine-500w-class-d-digital-mono-amplifier-with-low-pass-crossover-black/7551285.p?skuId=7551285

After you have you amp, you need a sub. Pick any dual voice coil sub. Dual four is good. When wired in parallel it makes it 2ohms.

https://images.crutchfieldonline.com/ca/learningcenter/car/subwoofer_wiring/1DVC_4-ohm_mono.jpg

Now you have sub and amp. TIme for wiring. You need a wiring kit.

https://www.amazon.com/KnuKonceptz-Kolossus-Gauge-Amplifier-Installation/dp/B005CIJBKK/ref=lp_3308787011_1_12?srs=3308787011&ie=UTF8&qid=1491479560&sr=8-12

You will want Oxygen Free Copper, not Copper Clad Aluminum. Pure copper is what you are after. Anything else is junk.

Now you have your parts. Amp. Sub. Fat ass wire (4 gauge).

Run the power wire from the battery to where ever you want your amp, most people put it in the trunk. Make sure you have the inline fuse holder close the battery, within 12 inches.

Next, from the back if your stereo, you are going to run two wires. A remote wire that leads to the amp. And pair of RCA cables also to the amp. Next you are going to run a ground to the amp. The ground is simple because most people just find a bare metal in the trunk and use that.

Then you hook the power wire to the power terminal on the amp. Then the remote wire to the remote terminal on the amp. Then plug in the RCAs into the amp also. Power wire gives the amp power, remote wire turns the amp on and off with your car so you dont drain the battery because its always on. The RCAS give the amp an audio signal. Lastly, you go back and install the fuse, in the in line fuse box near the battery. And now you have a complete circuit, and thus, a working amp.

u/insanemilkshake · 3 pointsr/CarAV

I know you asked about an amp kit from Sonic, but I would highly recommend getting this kit from Amazon.

Some of the low end brands on Sonic that sell amp kits won't give you wire that's as thick as they actually it is (i.e. some '4 gauge' cables will have thicker sheathes and less wire than others). Knu Konceptz over-sizes their wires plus this kit is made with oxygen-free copper instead of cheaper copper clad aluminum, which would provide better current flow and OFC doesn't corrode as easily. It's a great deal for the price.

u/praetor- · 3 pointsr/CarAV

Front Speakers: JBL MS-62C $180

Subwoofer: JBL GTO1214D 12" DVC $90

Enclosure: Scosche SE12CC $45

Amplifier: JBL GTO-3EZ 50x2, 500x1 $170

Amp Kit: KnuKonceptz KCA 4 gauge $30

RCAs: KnuKonceptz Bassik RCA $8

RCA Y-Cable: Generic $6

Total $529

This assumes you'd be keeping the stock rear 6x9s. If you wanted to upgrade those:

Rear Speakers: JBL GTO928 6x9 $70

Amplifier: JBL GTO-5EZ $245

Amp Kit: KnuKonceptz Kolossus 4 gauge $60

RCAs: KnuKonceptz Bassik RCA $8

The upgrade to a 5 channel amp, the required upgrade to the amp kit, an additional set of RCA cables and the rear speakers tacks on an additional $183 for a total of $712.

You can also optionally upgrade to a 15" sub for an additional $31:

Subwoofer: JBL GTO1514D $114

Enclosure: Scosche SE15CC $51

In summary,

Front speakers and 12" sub: $529

Front speakers and 15" sub: $560

Front and rear speakers and 12" sub: $712

Front and rear speakers and 15" sub: $743


Personally I'd go with the 15" sub for $31 more. A 12" is probably just fine but you're better off buying a larger sub and turning it down than trying to get every last ounce of bass out of a smaller one.

u/BigSherv · 3 pointsr/CarAV

I just got back into car audio. I am adding a single sub to my car and have done some research recently. Here is what I would suggest as a cost effective way to add some bass to your car.

​

Alpine mono amp new at BestBuy for $99. It puts out 500 watts @ 2 ohms.

Alpine MRV-M500 Mono V-Power Digital Amplifier

​

4 gauge amp kits or $19.45 on amazon.

SoundBox Connected 4 Gauge Amp Kit Amplifier Install Wiring Complete 4 Ga Installation Cables 2200W

​

You will need a line our converter (LOC) to hook up the factory stereo to the amp. This one includes a control knob for the amp as well. This one is $19.97.

SCOSCHE LOC2SL Car Stereo 2-Channel Audio Adjustable Amplifier Add-On Adapter with Remote Control Knob

If you want a cheaper one you can buy this one for $7.94.

PAC SNI-35 Variable LOC Line Out Converter

​

You will need an enclosure for the sub. Since you are cost conscious, I imagine you want the most boom for your buck so I would go with a ported sub box. I prefer sealed but it is up to you. This one is $36.95 and has a decent speaker terminal.

ASC Single 12" Subwoofer Universal Fit Vented Port Sub Box Speaker Enclosure

​

|Part|Price|
|:-|:-|
|Amp|$99|
|Amp Kit|$19.45|
|LOC|$7.94|
|Enclosure|$36.95|
|TOTAL before sub woofer, shipping is free.|$163.34|

​

That leaves you $336.66 to spend on a sub woofer and installation if you need it. You could easily get 2 10's and a box and still have a lot of cash left.

​

You can buy a used box pretty cheap on OfferUp or Craigslist as well as a quality amp and sub. I would not buy a used amp kit or a used LOC. However the amp kit you could simply buy the wire directly.

​

You see a lot of people selling JL W3's online used. That is a quality woofer at a good price.

​

I hope this info helps.

(Edit)
Here is the oxygen free wiring kit I purchased. It is a lot more but reasonable priced on Amazon for what you get.
KnuKonceptz Kolossus 4 Gauge OFC Amplifier Installation Kit

u/Bezzle59 · 2 pointsr/CarAV

Since I'm assuming you're planning on 2 of those subs, switch out the amp for this and switch out the wire for at least this. That amp will put out 1000w at 2ohm (a final load from pairing 2x 2ohm DVC woofers like those) and that wiring kit will be able to handle all the power that amp can pull.

u/theworstghost · 2 pointsr/CarAV

Here's another 4ga option that has speaker wire.

u/mestapho · 2 pointsr/CarAV

In your car I’d do a SA15 on 1200-1500 watts ported in 3.5 net at 34 Hz.

For RF the R1200-1D would be a good match

and this amp kit

Do you have a LOC or DSP?

u/infinity526 · 2 pointsr/CarAV

That amp is a terrible choice for that sub. It's meant for door speakers. I'd look at something like the Rockford R500X1D. For the wiring kit, it looks like both of those are CCA wire, which is less than ideal. Look for an OFC kit. Knu Konceptz has a good kit at a good price in the US, but I'm not sure about their Canadian availability. As a fallback, there's the Kicker PK4, which is more expensive (here at least) but is also good wire, and should be readily available there.

u/TheDullard · 2 pointsr/CarAV

You want to get a d2 sub. That means it's dual voicecoil, 2ohms per coil. coils would be wired parallel for a 1 ohm final load. A 4 gauge amp wiring kit will be fine. I would spend the few extra dollars for a nice OFC (oxygen free copper) kit over a kit that uses CCA(copper clad aluminum) Here is a really good choice, has all you need http://www.amazon.com/KnuKonceptz-Kolossus-Gauge-Amplifier-Installation/dp/B005CIJBKK/ref=sr_1_2?s=electronics&ie=UTF8&qid=1344479367&sr=1-2&keywords=knukonceptz+4+gauge

u/fishymamba · 2 pointsr/CarAV

I would get this wire kit instead: http://www.amazon.com/KnuKonceptz-Kolossus-Gauge-Amplifier-Installation/dp/B005CIJBKK/ref=sr_1_2?ie=UTF8&qid=1417578842&sr=8-2&keywords=knuconcepts+4guage

It is Oxygen Free Copper and has a higher current capacity. The wire you chose has a max rating of 100Amps. Your amp has 120Amps worth of fuses on it. So you will want to get a better wire.

The one I posted should be perfect.

u/dooshbox · 2 pointsr/BuildaCarAVForMe

Speaker Amp $145

Save a little with this Knukonceptz wiring kit $50

Sub amp $150

Puts your total at $620. You may be able to find a cheaper speaker amp, I'm just a fan of Alpine, and I love mine!

u/DrGabooboo · 2 pointsr/BuildaCarAVForMe

I have a 2012 accord, and the 08-12 have the same body style, so I know what you need and some potential problems you might run into.

You should replace the radio because it'll make a dramatic difference in the sound quality, same with adding an amp. Also, if you want to put quality speakers in, you'll need an amp or you'll risk blowing your speakers.

Problems you'll run into:

  • With a new head unit, you'll lose the function of the screen on top, but I think it's a good trade off for the sound quality

  • You can't have speakers in the front doors that are too deep because it'll hit the window, but there are good shallow mount speakers to put there.

  • The back deck WILL rattle, even you you put a good amount of deadener on it, deadener will still help a good amount though. To solve this problem, deaden it, put weather stripping along the back of the deck where it meets the window (I doubled it up where the brake light is back there), and I drilled two small holes from inside the trunk and zip-tied it down around the metal frame under the deck. This worked great for me and I have two 13" subs in a ported box. If you're looking for one 10", it'll definitely work. It might look a little janky, but that's the only way for it to not rattle.

  • To have someone install everything, run the wires, and deaden what you need deadened (which is, at minimum, the front doors and front door panels, rear deck, trunk, trunk lid, and probably the the pillars in the back), you're probably looking at around $300-$600 for about 4-6 hours of work, depending on where you take it to. And some charge more for installing if you didn't buy the parts from them.

    In your other post on /r/CarAV, you said you have a couple grand to spend, so I'm going to put a complete SQ system together that you'll be able to keep for a long time and move from car to car.

  • KnuKonceptz 4 gauge amp kit - $50 (they have a cheaper 4 gauge amp kit, but it doesn't have a big enough fuse on it)

  • 100' KnuKonceptz speaker wire - $20

  • RCA cables (need 2 more pairs) - $10 x 2

  • Dash kit - $50

  • Wiring harness - $12
  • Antenna adapter - $10

  • Steering wheel control interface - $80

  • Kenwood excelon headunit - $260

  • 6.5" Focal component speakers for the front - $250

  • 6.5" JL coax speakers for the back deck - $140

  • Baffles for the speakers on back deck - $8 (you need these if you want to hear these speakers because of noise cancelation from the sub)

  • 10" pioneer sub - $300

  • Crappy pre-fab sub box - $60

  • Custom box for your car - $120 + $15 if you want a grill (They will build it to the specs of the sub, which is 1 cu.ft. sealed if you go with the pioneer)

  • Kenwood excelon 5 channel amp - $500

  • 25ft^2 of sound deadener - $55

  • $1815-1890 + $300-$600 installation + your tax rate

    You probably can find some of this stuff cheaper on amazon, but they're not a registered dealer so you're SOL if something goes bad.

    I'd go in to the store, get two quotes, 1) just to install all of this stuff you bought online and 2) what it would cost to buy everything from them with installation and see which is cheaper. The cost for dealers on door speakers and subwoofers is literally half of what they sell for, not head units though, they have very little mark up. Chances are the store might end up being cheaper if you tell them exactly what you're looking at online and how much you're planning to spend on it. Win-Win for you and the dealer, he get's business and you get a better price and similar quality products if they can compete with the online prices. Plus you'd be supporting a local business, unless you were planning on going to best buy, car toys, or something like that (don't do that, go to a local place). And if you buy all this stuff from a dealer and have it installed there, if anything goes wrong you can take it back and have them deal with it.





u/Kadori · 2 pointsr/CarAV

Hey there /u/theteg, glad to see you come by.
i would personally recommend a c2 audio threatcon 2 in dual 4 coils amped by a kenwood 9105d with a good 4 gauge wiring kit and a 1.5 cube sealed enclosure

i have personally used each one of these products and have had nothing but a great experience with each one of them

u/illuxion · 2 pointsr/CarAV

KCA is Knu's code for copper clad aluminum which is aluminum wire with a thin copper coating. Kolossus Flex is OFC, oxygen free copper, and is good for 150A at 4ga. Pure copper is a MUCH better conductor than aluminum.

u/MyFishIsGold · 1 pointr/CarAV

Car Audio Newb

I bought a used Skar ZVX-8 dual 2 ohm 900 rms sub in a box and its currently wired to 1 ohm. I plan on getting an Audiopipe APCL-1001D as my amp (getting a good deal in it). Specs say it should do 1000 watt rms at 1 ohm, or 600 rms at 2 ohm.

My questions are, should I run it at 1 ohm or rewire the sub for 2 ohms? And as far as an amp wiring kit, would this be a good option, or should I just build my own kit with welding cable? Trying to be as cost efficient as possible.

u/UMDSmith · 1 pointr/CarAV

Let us assume that you are truly pushing 1000w. If we divide that by 12V (really 13+ with car running), your wiring will need to support 83amps at most.

Consulting the wiring chart (http://www.crutchfield.com/S-t4zqwB6AVEs/learn/learningcenter/car/cable_gauge_chart.html), depending on distance you will need 6 or 4 ga. wiring.

Given these specs and that I always over engineer, I'd go with this kit
http://www.amazon.com/KnuKonceptz-Kolossus-Gauge-Amplifier-Installation/dp/B005CIJBKK/ref=sr_1_4?ie=UTF8&qid=1369242499&sr=8-4&keywords=knukonceptz

which is $50 on Amazon.

u/ElJefe10 · 1 pointr/BuildaCarAVForMe

Morel Maximo component set - $150 shipped

Kenwood ddx374BT - $220 shipped. Comes with $40 off the dash kit you might need

Fi Alpha 12 v2 - $180 with the "Dual 2 Xmax" option (absolutely necessary), plus shipping.

Rockford 750.1d - $223 shipped. These are underrated little tanks.

Knukonceptz OFC 4awg kit - $60 shipped.

Other supplies (wood, glue, wire harness) - $70

Total - $903. This would be ideal. However, if you need to skimp on something, you can get these options instead:
Hertz dsk component set - $115

RF p2d2 12" sub - $104

Alpine single din HU with BT - $161

PPI monoblock amp - $132

New total - $642 plus up to $70 for the dash kit, so $712. If you get the PPI amp and RF sub, run it at 4 ohms.

u/ION-8 · 1 pointr/BuildaCarAVForMe

I’ll be the guy to give you some advise seeing there has been no post in 13 hours, I’m no professional.

$35 copper 6ga amp wire kit Walmart - Locally

$50 KnuKoncepts 4ga OFC amp kit Amazon

Only use OFC (Oxygen Free Copper) Wire

$127 Audio Controls LC6i LineOut Converter Amazon

This let’s you keep your stock radio and add the two amps

$140 Alpine MRV-F300 SonicElectronix

Power your new door speakers for increase loudness and clarity

$80/pair NVX 6.5” Component Kit SonicElectronix

Two sets would cover your doors, they are a high enough rms where the amp will not blow them as long as you have it tuned properly and it’s not turned all the way up! Distortion kills speakers! I would disconnect your rear deck center speaker.


$101 2X Alpine W12S4 12” Single 4ohm Subs SonicElectronix

$90 Ported Subwoofer Box- almost optimal size. SonicElectronix

check your trunk measurements you might have to go with a smaller sealed box*

$150 Alpine MRV-M500 Subwoofer amp SonicElectronix

You will be slightly over budget. Self install or nothing. Many areas to improve in the future. Goodluck

u/codename_rondo · 1 pointr/CarAV

Sure. Not the most knowledgable when it comes to wiring, so if I'm wrong hopefully someone will correct me... But I think a 4 gauge OFC kit will do you just fine, and KnuConceptz seems to be the undisputed king of wiring around these parts.

http://www.amazon.com/KnuKonceptz-Kolossus-Gauge-Amplifier-Installation/dp/B005CIJBKK

u/carbon_x · 1 pointr/CarAV

Amp: https://www.amazon.com/Pioneer-GM-D8601-Class-Amplifier-Remote/dp/B00CFX58YI

Sub: http://www.caraudiobargain.com/b-stock-sundown-audio-ev3-10-subwoofer-500w-e-series/

Wiring kit: https://www.amazon.com/KnuKonceptz-Kolossus-Gauge-Amplifier-Installation/dp/B005CIJBKK

If you want a ported box, build it. Prefab boxes are 98% junk when it comes to meeting the specs of the woofer. Sealed prefab boxes aren't the best, but you don't need to match port size and all that, as long as the cubic footage is there it will be alright. Sealed isn't as loud as ported, though.

If anyone has other suggestions, feel free to tell me my selection was shit. I'm still soaking up knowledge.

u/Yeeeeeeeeeooooooooo · 1 pointr/CarAV

You won’t be able to see voltage drops normally, the amp may be getting voltage but not enough amps. Check continuity on the amp wire and make sure there’s not added resistance in the wire. Should be damn near nothing.

And I’ve always had good luck with the kicker kits and I’ve hear good things about the knukonceptz kits.

Normally when a client comes in to us and says that they have a amp cutting out and going into protect mode, we swap it with our shop test amp and sub, which is a kicker cxa 600.1 and kicker comp r 12” and we crank the shit out of it and see, if it cuts out with that system then we swap the wires and all is good, if it doesn’t we sell them an amp and sub.

KnuKonceptz Kolossus 4 Gauge OFC Amplifier Installation Kit https://www.amazon.com/dp/B005CIJBKK/ref=cm_sw_r_cp_api_i_Gg.7Cb5PNTECF

Kicker PK4 4 Gauge OFC Power Amplifier Installation Kit https://www.amazon.com/dp/B00IFA6C1S/ref=cm_sw_r_cp_api_i_fh.7Cb7E4TQZN